arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+ OR X11
   2 /*
   3  * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol 19
   4  *
   5  * Some assumptions are made:
   6  *    * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4)
   7  *    * mezzanine card M13 is connected to IO SLOT6 (25g-aui for DPMAC 5,6)
   8  *    * mezzanine card M7 is connected to IO SLOT2 (xlaui4 for DPMAC 2)
   9  *
  10  * Copyright 2020 NXP
  11  *
  12  */
  13
  14 #include "fsl-lx2160a-qds.dtsi"
  15
  16 &dpmac2 {
  17         status = "okay";
  18         phy-handle = <&cortina_phy0>;
  19         phy-connection-type = "xlaui4";
  20 };
  21
  22 &dpmac3 {
  23         status = "okay";
  24         phy-handle = <&aquantia_phy1>;
  25         phy-connection-type = "usxgmii";
  26 };
  27
  28 &dpmac4 {
  29         status = "okay";
  30         phy-handle = <&aquantia_phy2>;
  31         phy-connection-type = "usxgmii";
  32 };
  33
  34 &dpmac5 {
  35         status = "okay";
  36         phy-handle = <&inphi_phy0>;
  37         phy-connection-type = "25g-aui";
  38 };
  39
  40 &dpmac6 {
  41         status = "okay";
  42         phy-handle = <&inphi_phy1>;
  43         phy-connection-type = "25g-aui";
  44 };
  45
  46 &emdio1_slot1 {
  47         aquantia_phy1: ethernet-phy@4 {
  48                 compatible = "ethernet-phy-ieee802.3-c45";
  49                 reg = <0x0>;
  50         };
  51
  52         aquantia_phy2: ethernet-phy@5 {
  53                 compatible = "ethernet-phy-ieee802.3-c45";
  54                 reg = <0x1>;
  55         };
  56 };
  57
  58 &emdio1_slot2 {
  59         cortina_phy0: ethernet-phy@0 {
  60                 compatible = "ethernet-phy-ieee802.3-c45";
  61                 reg = <0x0>;
  62         };
  63 };
  64
  65 &emdio1_slot6 {
  66         inphi_phy0: ethernet-phy@0 {
  67                 compatible = "ethernet-phy-id0210.7440";
  68                 reg = <0x0>;
  69         };
  70
  71         inphi_phy1: ethernet-phy@1 {
  72                 compatible = "ethernet-phy-id0210.7440";
  73                 reg = <0x1>;
  74         };
  75 };