arch/arm/dts/fsl-ls1012a-qds.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+ OR X11
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  */
   5
   6 /include/ "fsl-ls1012a.dtsi"
   7
   8 / {
   9         model = "LS1012A QDS Board";
  10         aliases {
  11                 spi0 = &qspi;
  12                 spi1 = &dspi0;
  13         };
  14 };
  15
  16 &dspi0 {
  17         bus-num = <0>;
  18         status = "okay";
  19
  20         dflash0: n25q128a {
  21                 #address-cells = <1>;
  22                 #size-cells = <1>;
  23                 compatible = "jedec,spi-nor";
  24                 reg = <0>;
  25                 spi-max-frequency = <1000000>; /* input clock */
  26         };
  27
  28         dflash1: sst25wf040b {
  29                 #address-cells = <1>;
  30                 #size-cells = <1>;
  31                 compatible = "jedec,spi-nor";
  32                 spi-max-frequency = <3500000>;
  33                 reg = <1>;
  34         };
  35
  36         dflash2: en25s64 {
  37                 #address-cells = <1>;
  38                 #size-cells = <1>;
  39                 compatible = "jedec,spi-nor";
  40                 spi-max-frequency = <3500000>;
  41                 reg = <2>;
  42         };
  43 };
  44
  45 &qspi {
  46         status = "okay";
  47
  48         s25fs512s0: flash@0 {
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51                 compatible = "jedec,spi-nor";
  52                 spi-max-frequency = <50000000>;
  53                 reg = <0>;
  54         };
  55 };
  56
  57 &i2c0 {
  58         status = "okay";
  59         pca9547@77 {
  60                 compatible = "philips,pca9547";
  61                 reg = <0x77>;
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64
  65                 i2c@0 {
  66                         #address-cells = <1>;
  67                         #size-cells = <0>;
  68                         reg = <0x0>;
  69
  70                         rtc@68 {
  71                                 compatible = "dallas,ds3232";
  72                                 reg = <0x68>;
  73                                 /* IRQ10_B */
  74                                 interrupts = <0 150 0x4>;
  75                         };
  76                 };
  77
  78                 i2c@2 {
  79                         #address-cells = <1>;
  80                         #size-cells = <0>;
  81                         reg = <0x2>;
  82
  83                         ina220@40 {
  84                                 compatible = "ti,ina220";
  85                                 reg = <0x40>;
  86                                 shunt-resistor = <1000>;
  87                         };
  88
  89                         ina220@41 {
  90                                 compatible = "ti,ina220";
  91                                 reg = <0x41>;
  92                                 shunt-resistor = <1000>;
  93                         };
  94                 };
  95
  96                 i2c@3 {
  97                         #address-cells = <1>;
  98                         #size-cells = <0>;
  99                         reg = <0x3>;
 100
 101                         eeprom@56 {
 102                                 compatible = "at24,24c512";
 103                                 reg = <0x56>;
 104                         };
 105
 106                         eeprom@57 {
 107                                 compatible = "at24,24c512";
 108                                 reg = <0x57>;
 109                         };
 110
 111                         adt7461a@4c {
 112                                 compatible = "adt7461a";
 113                                 reg = <0x4c>;
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &duart0 {
 120         status = "okay";
 121 };
 122
 123 &usb0 {
 124         status = "okay";
 125         phy_type = "ulpi";
 126 };
 127
 128 &sata {
 129         status = "okay";
 130 };