arch/arm/dts/fsl-imx8dx.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2018 NXP
   4  */
   5
   6 #include <dt-bindings/interrupt-controller/arm-gic.h>
   7 #include "fsl-imx8-ca35.dtsi"
   8 #include <dt-bindings/soc/imx_rsrc.h>
   9 #include <dt-bindings/soc/imx8_pd.h>
  10 #include <dt-bindings/clock/imx8qxp-clock.h>
  11 #include <dt-bindings/input/input.h>
  12 #include <dt-bindings/pinctrl/pads-imx8qxp.h>
  13 #include <dt-bindings/gpio/gpio.h>
  14
  15 / {
  16         model = "Freescale i.MX8DX";
  17         compatible = "fsl,imx8dx", "fsl,imx8qxp";
  18         interrupt-parent = <&gic>;
  19         #address-cells = <2>;
  20         #size-cells = <2>;
  21
  22         aliases {
  23                 ethernet0 = &fec1;
  24                 ethernet1 = &fec2;
  25                 serial0 = &lpuart0;
  26                 mmc0 = &usdhc1;
  27                 mmc1 = &usdhc2;
  28                 mmc2 = &usdhc3;
  29                 i2c0 = &i2c0;
  30                 i2c1 = &i2c1;
  31                 i2c2 = &i2c2;
  32                 i2c3 = &i2c3;
  33         };
  34
  35         memory@80000000 {
  36                 device_type = "memory";
  37                 reg = <0x00000000 0x80000000 0 0x40000000>;
  38                       /* DRAM space - 1, size : 1 GB DRAM */
  39         };
  40
  41         reserved-memory {
  42                 #address-cells = <2>;
  43                 #size-cells = <2>;
  44                 ranges;
  45
  46                 /*
  47                  * reserved-memory layout
  48                  * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4
  49                  * Shouldn't be used at A core and Linux side.
  50                  *
  51                  */
  52                 decoder_boot: decoder_boot@0x84000000 {
  53                         no-map;
  54                         reg = <0 0x84000000 0 0x2000000>;
  55                 };
  56                 encoder_boot: encoder_boot@0x86000000 {
  57                         no-map;
  58                         reg = <0 0x86000000 0 0x2000000>;
  59                 };
  60                 rpmsg_reserved: rpmsg@0x90000000 {
  61                         no-map;
  62                         reg = <0 0x90000000 0 0x400000>;
  63                 };
  64                 decoder_rpc: decoder_rpc@0x90400000 {
  65                         no-map;
  66                         reg = <0 0x90400000 0 0x1000000>;
  67                 };
  68                 encoder_rpc: encoder_rpc@0x91400000 {
  69                         no-map;
  70                         reg = <0 0x91400000 0 0x1000000>;
  71                 };
  72                 dsp_reserved: dsp@0x92400000 {
  73                         no-map;
  74                         reg = <0 0x92400000 0 0x2000000>;
  75                 };
  76                 decoder_str: str@0x94400000 {
  77                         no-map;
  78                         reg = <0 0x94400000 0 0x1800000>;
  79                 };
  80                 /* global autoconfigured region for contiguous allocations */
  81                 linux,cma {
  82                         compatible = "shared-dma-pool";
  83                         reusable;
  84                         size = <0 0x28000000>;
  85                         alloc-ranges = <0 0x96000000 0 0x28000000>;
  86                         linux,cma-default;
  87                 };
  88         };
  89
  90         gic: interrupt-controller@51a00000 {
  91                 compatible = "arm,gic-v3";
  92                 reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
  93                       <0x0 0x51b00000 0 0xC0000>; /* GICR (RD_base + SGI_base) */
  94                 #interrupt-cells = <3>;
  95                 interrupt-controller;
  96                 interrupts = <GIC_PPI 9
  97                         (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
  98                 interrupt-parent = <&gic>;
  99         };
 100
 101         mu: mu@5d1c0000 {
 102                 compatible = "fsl,imx8-mu";
 103                 reg = <0x0 0x5d1c0000 0x0 0x10000>;
 104                 interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 105                 interrupt-parent = <&gic>;
 106                 status = "okay";
 107
 108                 clk: clk {
 109                         compatible = "fsl,imx8qxp-clk";
 110                         #clock-cells = <1>;
 111                 };
 112
 113                 iomuxc: iomuxc {
 114                         compatible = "fsl,imx8qxp-iomuxc";
 115                 };
 116         };
 117
 118         imx8qx-pm {
 119                 compatible = "simple-bus";
 120                 #address-cells = <1>;
 121                 #size-cells = <0>;
 122
 123                 pd_lsio: PD_LSIO {
 124                         compatible = "nxp,imx8-pd";
 125                         reg = <SC_R_LAST>;
 126                         #power-domain-cells = <0>;
 127                         #address-cells = <1>;
 128                         #size-cells = <0>;
 129
 130                         pd_lsio_gpio0: PD_LSIO_GPIO_0 {
 131                                 reg = <SC_R_GPIO_0>;
 132                                 #power-domain-cells = <0>;
 133                                 power-domains = <&pd_lsio>;
 134                         };
 135                         pd_lsio_gpio1: PD_LSIO_GPIO_1 {
 136                                 reg = <SC_R_GPIO_1>;
 137                                 #power-domain-cells = <0>;
 138                                 power-domains = <&pd_lsio>;
 139                         };
 140                         pd_lsio_gpio2: PD_LSIO_GPIO_2 {
 141                                 reg = <SC_R_GPIO_2>;
 142                                 #power-domain-cells = <0>;
 143                                 power-domains = <&pd_lsio>;
 144                         };
 145                         pd_lsio_gpio3: PD_LSIO_GPIO_3 {
 146                                 reg = <SC_R_GPIO_3>;
 147                                 #power-domain-cells = <0>;
 148                                 power-domains = <&pd_lsio>;
 149                         };
 150                         pd_lsio_gpio4: PD_LSIO_GPIO_4 {
 151                                 reg = <SC_R_GPIO_4>;
 152                                 #power-domain-cells = <0>;
 153                                 power-domains = <&pd_lsio>;
 154                         };
 155                         pd_lsio_gpio5: PD_LSIO_GPIO_5{
 156                                 reg = <SC_R_GPIO_5>;
 157                                 #power-domain-cells = <0>;
 158                                 power-domains = <&pd_lsio>;
 159                         };
 160                         pd_lsio_gpio6: PD_LSIO_GPIO_6 {
 161                                 reg = <SC_R_GPIO_6>;
 162                                 #power-domain-cells = <0>;
 163                                 power-domains = <&pd_lsio>;
 164                         };
 165                         pd_lsio_gpio7: PD_LSIO_GPIO_7 {
 166                                 reg = <SC_R_GPIO_7>;
 167                                 #power-domain-cells = <0>;
 168                                 power-domains = <&pd_lsio>;
 169                         };
 170                 };
 171
 172                 pd_conn: PD_CONN {
 173                         compatible = "nxp,imx8-pd";
 174                         reg = <SC_R_LAST>;
 175                         #power-domain-cells = <0>;
 176                         #address-cells = <1>;
 177                         #size-cells = <0>;
 178
 179                         pd_conn_sdch0: PD_CONN_SDHC_0 {
 180                                 reg = <SC_R_SDHC_0>;
 181                                 #power-domain-cells = <0>;
 182                                 power-domains = <&pd_conn>;
 183                         };
 184                         pd_conn_sdch1: PD_CONN_SDHC_1 {
 185                                 reg = <SC_R_SDHC_1>;
 186                                 #power-domain-cells = <0>;
 187                                 power-domains = <&pd_conn>;
 188                         };
 189                         pd_conn_sdch2: PD_CONN_SDHC_2 {
 190                                 reg = <SC_R_SDHC_2>;
 191                                 #power-domain-cells = <0>;
 192                                 power-domains = <&pd_conn>;
 193                         };
 194                         pd_conn_enet0: PD_CONN_ENET_0 {
 195                                 reg = <SC_R_ENET_0>;
 196                                 #power-domain-cells = <0>;
 197                                 power-domains = <&pd_conn>;
 198                         };
 199                         pd_conn_enet1: PD_CONN_ENET_1 {
 200                                 reg = <SC_R_ENET_1>;
 201                                 #power-domain-cells = <0>;
 202                                 power-domains = <&pd_conn>;
 203                         };
 204                 };
 205
 206                 pd_dma: PD_DMA {
 207                         compatible = "nxp,imx8-pd";
 208                         reg = <SC_R_LAST>;
 209                         #power-domain-cells = <0>;
 210                         #address-cells = <1>;
 211                         #size-cells = <0>;
 212
 213                         pd_dma_lpi2c0: PD_DMA_I2C_0 {
 214                                 reg = <SC_R_I2C_0>;
 215                                 #power-domain-cells = <0>;
 216                                 power-domains = <&pd_dma>;
 217                         };
 218                         pd_dma_lpi2c1: PD_DMA_I2C_1 {
 219                                 reg = <SC_R_I2C_1>;
 220                                 #power-domain-cells = <0>;
 221                                 power-domains = <&pd_dma>;
 222                         };
 223                         pd_dma_lpi2c2:PD_DMA_I2C_2 {
 224                                 reg = <SC_R_I2C_2>;
 225                                 #power-domain-cells = <0>;
 226                                 power-domains = <&pd_dma>;
 227                         };
 228                         pd_dma_lpi2c3: PD_DMA_I2C_3 {
 229                                 reg = <SC_R_I2C_3>;
 230                                 #power-domain-cells = <0>;
 231                                 power-domains = <&pd_dma>;
 232                         };
 233                         pd_dma_lpuart0: PD_DMA_UART0 {
 234                                 reg = <SC_R_UART_0>;
 235                                 #power-domain-cells = <0>;
 236                                 power-domains = <&pd_dma>;
 237                                 wakeup-irq = <225>;
 238                         };
 239                         pd_dma_lpuart1: PD_DMA_UART1 {
 240                                 reg = <SC_R_UART_1>;
 241                                 #power-domain-cells = <0>;
 242                                 power-domains = <&pd_dma>;
 243                         };
 244                         pd_dma_lpuart2: PD_DMA_UART2 {
 245                                 reg = <SC_R_UART_2>;
 246                                 #power-domain-cells = <0>;
 247                                 power-domains = <&pd_dma>;
 248                         };
 249                         pd_dma_lpuart3: PD_DMA_UART3 {
 250                                 reg = <SC_R_UART_3>;
 251                                 #power-domain-cells = <0>;
 252                                 power-domains = <&pd_dma>;
 253                         };
 254                 };
 255         };
 256
 257         i2c0: i2c@5a800000 {
 258                 compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
 259                 reg = <0x0 0x5a800000 0x0 0x4000>;
 260                 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 261                 interrupt-parent = <&gic>;
 262                 clocks = <&clk IMX8QXP_I2C0_CLK>;
 263                 clock-names = "per";
 264                 assigned-clocks = <&clk IMX8QXP_I2C0_CLK>;
 265                 assigned-clock-rates = <24000000>;
 266                 power-domains = <&pd_dma_lpi2c0>;
 267                 #address-cells = <1>;
 268                 #size-cells = <0>;
 269                 status = "disabled";
 270         };
 271
 272         i2c1: i2c@5a810000 {
 273                 compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
 274                 reg = <0x0 0x5a810000 0x0 0x4000>;
 275                 interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 276                 interrupt-parent = <&gic>;
 277                 clocks = <&clk IMX8QXP_I2C1_CLK>,
 278                         <&clk IMX8QXP_I2C1_IPG_CLK>;
 279                 clock-names = "per", "ipg";
 280                 assigned-clocks = <&clk IMX8QXP_I2C1_CLK>;
 281                 assigned-clock-rates = <24000000>;
 282                 power-domains = <&pd_dma_lpi2c1>;
 283                 #address-cells = <1>;
 284                 #size-cells = <0>;
 285                 status = "disabled";
 286         };
 287
 288         i2c2: i2c@5a820000 {
 289                 compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
 290                 reg = <0x0 0x5a820000 0x0 0x4000>;
 291                 interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 292                 interrupt-parent = <&gic>;
 293                 clocks = <&clk IMX8QXP_I2C2_CLK>;
 294                 clock-names = "per";
 295                 assigned-clocks = <&clk IMX8QXP_I2C2_CLK>;
 296                 assigned-clock-rates = <24000000>;
 297                 power-domains = <&pd_dma_lpi2c2>;
 298                 #address-cells = <1>;
 299                 #size-cells = <0>;
 300                 status = "disabled";
 301         };
 302
 303         i2c3: i2c@5a830000 {
 304                 compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
 305                 reg = <0x0 0x5a830000 0x0 0x4000>;
 306                 interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 307                 interrupt-parent = <&gic>;
 308                 clocks = <&clk IMX8QXP_I2C3_CLK>,
 309                         <&clk IMX8QXP_I2C3_IPG_CLK>;
 310                 clock-names = "per", "ipg";
 311                 assigned-clocks = <&clk IMX8QXP_I2C3_CLK>;
 312                 assigned-clock-rates = <24000000>;
 313                 power-domains = <&pd_dma_lpi2c3>;
 314                 #address-cells = <1>;
 315                 #size-cells = <0>;
 316                 status = "disabled";
 317         };
 318
 319         gpio0: gpio@5d080000 {
 320                 compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
 321                 reg = <0x0 0x5d080000 0x0 0x10000>;
 322                 interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 323                 gpio-controller;
 324                 #gpio-cells = <2>;
 325                 power-domains = <&pd_lsio_gpio0>;
 326                 interrupt-controller;
 327                 #interrupt-cells = <2>;
 328         };
 329
 330         gpio1: gpio@5d090000 {
 331                 compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
 332                 reg = <0x0 0x5d090000 0x0 0x10000>;
 333                 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 334                 gpio-controller;
 335                 #gpio-cells = <2>;
 336                 power-domains = <&pd_lsio_gpio1>;
 337                 interrupt-controller;
 338                 #interrupt-cells = <2>;
 339         };
 340
 341         gpio2: gpio@5d0a0000 {
 342                 compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
 343                 reg = <0x0 0x5d0a0000 0x0 0x10000>;
 344                 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 345                 gpio-controller;
 346                 #gpio-cells = <2>;
 347                 power-domains = <&pd_lsio_gpio2>;
 348                 interrupt-controller;
 349                 #interrupt-cells = <2>;
 350         };
 351
 352         gpio3: gpio@5d0b0000 {
 353                 compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
 354                 reg = <0x0 0x5d0b0000 0x0 0x10000>;
 355                 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 356                 gpio-controller;
 357                 #gpio-cells = <2>;
 358                 power-domains = <&pd_lsio_gpio3>;
 359                 interrupt-controller;
 360                 #interrupt-cells = <2>;
 361         };
 362
 363         gpio4: gpio@5d0c0000 {
 364                 compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
 365                 reg = <0x0 0x5d0c0000 0x0 0x10000>;
 366                 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 367                 gpio-controller;
 368                 #gpio-cells = <2>;
 369                 power-domains = <&pd_lsio_gpio4>;
 370                 interrupt-controller;
 371                 #interrupt-cells = <2>;
 372         };
 373
 374         gpio5: gpio@5d0d0000 {
 375                 compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
 376                 reg = <0x0 0x5d0d0000 0x0 0x10000>;
 377                 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 378                 gpio-controller;
 379                 #gpio-cells = <2>;
 380                 power-domains = <&pd_lsio_gpio5>;
 381                 interrupt-controller;
 382                 #interrupt-cells = <2>;
 383         };
 384
 385         gpio6: gpio@5d0e0000 {
 386                 compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
 387                 reg = <0x0 0x5d0e0000 0x0 0x10000>;
 388                 interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 389                 gpio-controller;
 390                 #gpio-cells = <2>;
 391                 power-domains = <&pd_lsio_gpio6>;
 392                 interrupt-controller;
 393                 #interrupt-cells = <2>;
 394         };
 395
 396         gpio7: gpio@5d0f0000 {
 397                 compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
 398                 reg = <0x0 0x5d0f0000 0x0 0x10000>;
 399                 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 400                 gpio-controller;
 401                 #gpio-cells = <2>;
 402                 power-domains = <&pd_lsio_gpio7>;
 403                 interrupt-controller;
 404                 #interrupt-cells = <2>;
 405         };
 406
 407         lpuart0: serial@5a060000 {
 408                 compatible = "fsl,imx8qm-lpuart";
 409                 reg = <0x0 0x5a060000 0x0 0x1000>;
 410                 interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 411                 clocks = <&clk IMX8QXP_UART0_CLK>,
 412                          <&clk IMX8QXP_UART0_IPG_CLK>;
 413                 clock-names = "per", "ipg";
 414                 assigned-clocks = <&clk IMX8QXP_UART0_CLK>;
 415                 assigned-clock-rates = <80000000>;
 416                 power-domains = <&pd_dma_lpuart0>;
 417                 status = "disabled";
 418         };
 419
 420         lpuart1: serial@5a070000 {
 421                 compatible = "fsl,imx8qm-lpuart";
 422                 reg = <0x0 0x5a070000 0x0 0x1000>;
 423                 interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 424                 clocks = <&clk IMX8QXP_UART1_CLK>,
 425                          <&clk IMX8QXP_UART1_IPG_CLK>;
 426                 clock-names = "per", "ipg";
 427                 assigned-clocks = <&clk IMX8QXP_UART1_CLK>;
 428                 assigned-clock-rates = <80000000>;
 429                 power-domains = <&pd_dma_lpuart1>;
 430                 status = "disabled";
 431         };
 432
 433         lpuart2: serial@5a080000 {
 434                 compatible = "fsl,imx8qm-lpuart";
 435                 reg = <0x0 0x5a080000 0x0 0x1000>;
 436                 interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 437                 clocks = <&clk IMX8QXP_UART2_CLK>,
 438                          <&clk IMX8QXP_UART2_IPG_CLK>;
 439                 clock-names = "per", "ipg";
 440                 assigned-clocks = <&clk IMX8QXP_UART2_CLK>;
 441                 assigned-clock-rates = <80000000>;
 442                 power-domains = <&pd_dma_lpuart2>;
 443                 status = "disabled";
 444         };
 445
 446         lpuart3: serial@5a090000 {
 447                 compatible = "fsl,imx8qm-lpuart";
 448                 reg = <0x0 0x5a090000 0x0 0x1000>;
 449                 interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
 450                 clocks = <&clk IMX8QXP_UART3_CLK>,
 451                          <&clk IMX8QXP_UART3_IPG_CLK>;
 452                 clock-names = "per", "ipg";
 453                 assigned-clocks = <&clk IMX8QXP_UART3_CLK>;
 454                 assigned-clock-rates = <80000000>;
 455                 power-domains = <&pd_dma_lpuart3>;
 456                 status = "disabled";
 457         };
 458
 459         usdhc1: usdhc@5b010000 {
 460                 compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
 461                 interrupt-parent = <&gic>;
 462                 interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 463                 reg = <0x0 0x5b010000 0x0 0x10000>;
 464                 clocks = <&clk IMX8QXP_SDHC0_IPG_CLK>,
 465                         <&clk IMX8QXP_SDHC0_CLK>,
 466                         <&clk IMX8QXP_CLK_DUMMY>;
 467                 clock-names = "ipg", "per", "ahb";
 468                 assigned-clocks = <&clk IMX8QXP_SDHC0_SEL>, <&clk IMX8QXP_SDHC0_DIV>;
 469                 assigned-clock-parents = <&clk IMX8QXP_CONN_PLL0_CLK>;
 470                 assigned-clock-rates = <0>, <400000000>;
 471                 power-domains = <&pd_conn_sdch0>;
 472                 fsl,tuning-start-tap = <20>;
 473                 fsl,tuning-step= <2>;
 474                 status = "disabled";
 475         };
 476
 477         usdhc2: usdhc@5b020000 {
 478                 compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
 479                 interrupt-parent = <&gic>;
 480                 interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 481                 reg = <0x0 0x5b020000 0x0 0x10000>;
 482                 clocks = <&clk IMX8QXP_SDHC1_IPG_CLK>,
 483                         <&clk IMX8QXP_SDHC1_CLK>,
 484                         <&clk IMX8QXP_CLK_DUMMY>;
 485                 clock-names = "ipg", "per", "ahb";
 486                 assigned-clocks = <&clk IMX8QXP_SDHC1_SEL>, <&clk IMX8QXP_SDHC1_DIV>;
 487                 assigned-clock-parents = <&clk IMX8QXP_CONN_PLL0_CLK>;
 488                 assigned-clock-rates = <0>, <200000000>;
 489                 power-domains = <&pd_conn_sdch1>;
 490                 fsl,tuning-start-tap = <20>;
 491                 fsl,tuning-step= <2>;
 492                 status = "disabled";
 493         };
 494
 495         usdhc3: usdhc@5b030000 {
 496                 compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
 497                 interrupt-parent = <&gic>;
 498                 interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 499                 reg = <0x0 0x5b030000 0x0 0x10000>;
 500                 clocks = <&clk IMX8QXP_SDHC2_IPG_CLK>,
 501                         <&clk IMX8QXP_SDHC2_CLK>,
 502                         <&clk IMX8QXP_CLK_DUMMY>;
 503                 clock-names = "ipg", "per", "ahb";
 504                 assigned-clocks = <&clk IMX8QXP_SDHC2_SEL>, <&clk IMX8QXP_SDHC2_DIV>;
 505                 assigned-clock-parents = <&clk IMX8QXP_CONN_PLL0_CLK>;
 506                 assigned-clock-rates = <0>, <200000000>;
 507                 power-domains = <&pd_conn_sdch2>;
 508                 status = "disabled";
 509         };
 510
 511         fec1: ethernet@5b040000 {
 512                 compatible = "fsl,imx7d-fec", "fsl,imx8qm-fec";
 513                 reg = <0x0 0x5b040000 0x0 0x10000>;
 514                 interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
 515                                 <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 516                                 <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
 517                                 <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
 518                 clocks = <&clk IMX8QXP_ENET0_IPG_CLK>, <&clk IMX8QXP_ENET0_AHB_CLK>,
 519                         <&clk IMX8QXP_ENET0_RGMII_TX_CLK>, <&clk IMX8QXP_ENET0_PTP_CLK>;
 520                 clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
 521                 assigned-clocks = <&clk IMX8QXP_ENET0_REF_DIV>, <&clk IMX8QXP_ENET0_PTP_CLK>;
 522                 assigned-clock-rates = <125000000>, <125000000>;
 523                 fsl,num-tx-queues=<3>;
 524                 fsl,num-rx-queues=<3>;
 525                 power-domains = <&pd_conn_enet0>;
 526                 status = "disabled";
 527         };
 528
 529         fec2: ethernet@5b050000 {
 530                 compatible = "fsl,imx7d-fec", "fsl,imx8qm-fec";
 531                 reg = <0x0 0x5b050000 0x0 0x10000>;
 532                 interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
 533                                 <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
 534                                 <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
 535                                 <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
 536                 clocks = <&clk IMX8QXP_ENET1_IPG_CLK>, <&clk IMX8QXP_ENET1_AHB_CLK>,
 537                         <&clk IMX8QXP_ENET1_RGMII_TX_CLK>, <&clk IMX8QXP_ENET1_PTP_CLK>;
 538                 clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
 539                 assigned-clocks = <&clk IMX8QXP_ENET1_REF_DIV>, <&clk IMX8QXP_ENET1_PTP_CLK>;
 540                 assigned-clock-rates = <125000000>, <125000000>;
 541                 fsl,num-tx-queues=<3>;
 542                 fsl,num-rx-queues=<3>;
 543                 power-domains = <&pd_conn_enet1>;
 544                 status = "disabled";
 545         };
 546 };
 547
 548 &A35_0 {
 549         clocks = <&clk IMX8QXP_A35_DIV>;
 550 };
 551
 552 /delete-node/ &A35_2;
 553 /delete-node/ &A35_3;