Merge branch 'master' of git://tinc-vpn.org/tinc into 1.1
[oweals/tinc.git] / NEWS
1 Version 1.1-cvs              Work in progress
2
3  * Use libevent to handle I/O events and timeouts.
4
5  * Use splay trees instead of AVL trees.
6
7 Version 1.0.14               May  8 2011
8
9  * Fixed reading configuration files that do not end with a newline. Again.
10
11  * Allow arbitrary configuration options being specified on the command line.
12
13  * Allow all options in both tinc.conf and the local host config file.
14
15  * Configurable replay window, UDP send and receive buffers for performance tuning.
16
17  * Try harder to get UDP communication back after falling back to TCP.
18
19  * Initial support for attaching tinc to a VDE switch.
20
21  * DragonFly BSD support.
22
23  * Allow linking with OpenSSL 1.0.0.
24
25  Thanks to Brandon Black, Julien Muchembled, Michael Tokarev, Rumko and Timothy
26  Redaelli for their contributions to this version of tinc.
27
28 Version 1.0.13               Apr 11 2010
29
30  * Allow building tinc without LZO and/or Zlib.
31
32  * Clamp MSS of TCP packets in both directions.
33
34  * Experimental StrictSubnets, Forwarding and DirectOnly options,
35    giving more control over information and packets received from/sent to other
36    nodes.
37
38  * Ensure tinc never sends symbolic names for ports over the wire.
39
40 Version 1.0.12               Feb  3 2010
41
42  * Really allow fast roaming of hosts to other nodes in a switched VPN.
43
44  * Fixes missing or incorrect environment variables when calling host-up/down
45    and subnet-up/down scripts in some cases.
46
47  * Allow port to be specified in Address statements.
48
49  * Clamp MSS of TCP packets to the discovered path MTU.
50
51  * Let two nodes behind NAT learn each others current UDP address and port via
52    a third node, potentially allowing direct communications in a similar way to
53    STUN.
54
55 Version 1.0.11               Nov  1 2009
56
57  * Fixed potential crash when the HUP signal is sent.
58
59  * Fixes handling of weighted Subnets in switch and hub modes, preventing
60    unnecessary broadcasts.
61
62  * Works around a MinGW bug that caused packets to Windows nodes to always be
63    sent via TCP.
64
65  * Improvements to the PMTU discovery code, especially on Windows.
66
67  * Use UDP again in certain cases where 1.0.10 was too conservative and fell
68    back to TCP unnecessarily.
69
70  * Allow fast roaming of hosts to other nodes in a switched VPN.
71
72 Version 1.0.10               Oct 18 2009
73
74  * Fixed potential crashes during shutdown and (in rare conditions) when other
75    nodes disconnected from the VPN.
76
77  * Improved NAT handling: tinc now copes with mangled port numbers, and will
78    automatically fall back to TCP if direct UDP connection between nodes is not
79    possible. The TCPOnly option should not have to be used anymore.
80
81  * Allow configuration files with CRLF line endings to be read on UNIX.
82
83  * Disable old RSA keys when generating new ones, and raise the default size of
84    new RSA keys to 2048 bits.
85
86  * Many fixes in the path MTU discovery code, especially when Compression is
87    being used.
88
89  * Tinc can now drop privileges and/or chroot itself.
90
91  * The TunnelServer code now just ignores information from clients instead of
92    disconnecting them.
93
94  * Improved performance on Windows by using the new ProcessPriority option and
95    by making the handling of packets received from the TAP-Win32 adapter more
96    efficient.
97
98  * Code cleanups: tinc now follows the C99 standard, copyright headers have
99    been updated to include patch authors, checkpoint tracing and localisation
100    features have been removed.
101
102  * Support for (jailbroken) iPhone and iPod Touch has been added.
103
104  Thanks to Florian Forster, Grzegorz Dymarek and especially Michael Tokarev for
105  their contributions to this version of tinc.
106
107 Version 1.0.9                Dec 26 2008
108
109  * Fixed tinc as a service under Windows 2003.
110
111  * Fixed reading configuration files that do not end with a newline.
112
113  * Fixed crashes in situations where hostnames could not be resolved or hosts
114    would disconnect at the same time as session keys were exchanged.
115
116  * Improved default settings of tun and tap devices on BSD platforms.
117
118  * Make IPv6 sockets bind only to IPv6 on Linux.
119
120  * Enable path MTU discovery by default.
121
122  * Fixed a memory leak that occured when connections were closed.
123
124  Thanks to Max Rijevski for his contributions to this version of tinc.
125
126 Version 1.0.8                May 16 2007
127
128  * Fixed some memory and resource leaks.
129
130  * Made network sockets non-blocking under Windows.
131
132  Thanks to Scott Lamb and "dnk" for their contributions to this version of tinc.
133
134 Version 1.0.7                Jan  5 2007
135
136  * Fixed a bug that caused slow network speeds on Windows.
137
138  * Fixed a bug that caused tinc unable to write packets to the tun device on
139    OpenBSD.
140
141 Version 1.0.6                Dec 18 2006
142
143  * More flexible detection of the LZO libraries when compiling.
144
145  * Fixed a bug where broadcasts in switch and hub modes sometimes would not
146    work anymore when part of the VPN had become disconnected from the rest.
147
148 version 1.0.5                Nov 14 2006
149
150  * Lots of small fixes.
151
152  * Broadcast packets no longer grow in size with each hop. This should
153    fix switch mode (again).
154  
155  * Generic host-up and host-down scripts.
156
157  * Optionally dump graph in graphviz format to a file or a script.
158
159  * Support LZO 2.0 and later.
160
161  Thanks to Scott Lamb for his contributions to this version of tinc.
162
163 version 1.0.4                May  4 2005
164
165  * Fix switch and hub modes.
166
167  * Optionally start scripts when a Subnet becomes (un)reachable.
168
169 version 1.0.3                Nov 11 2004
170
171 * Show error message when failing to write a PID file.
172
173 * Ignore spaces at end of lines in config files.
174
175 * Fix handling of late packets.
176
177 * Unify BSD tun/tap device handling. This allows IPv6 on tun devices and
178   anything on tap devices as long as the underlying OS supports it.
179
180 * Handle IPv6 on Solaris tun devices.
181
182 * Allow tinc to work properly under Windows XP SP2.
183
184 * Allow VLAN tagged Ethernet frames in switch and hub mode.
185
186 * Experimental PMTUDiscovery, TunnelServer and BlockingTCP options.
187
188 version 1.0.2                Nov  8 2003
189
190 * Fix address and hostname resolving under Windows.
191
192 * Remove warnings about non-existing scripts and unsupported address families.
193
194 * Use the event logger under Windows.
195
196 * Fix quoting of filenames and command line arguments under Windows.
197
198 * Strict checks for length incoming network packets and return values of
199   cryptographic functions,
200
201 * Fix a bug in metadata handling that made the tinc daemon abort.
202
203 version 1.0.1                Aug 14 2003
204
205 * Allow empty lines in config files.
206
207 * Fix handling of spaces and backslashes in filenames under native Windows.
208
209 * Allow scripts to be executed under native Windows.
210
211 * Update documentation, make it less Linux specific.
212
213 version 1.0                  Aug  4 2003
214
215 * Lots of small bugfixes and code cleanups.
216
217 * Throughput doubled and latency reduced.
218
219 * Added support for LZO compression.
220
221 * No need to set MAC address or disable ARP anymore.
222
223 * Added support for Windows 2000 and XP, both natively and in a Cygwin
224   environment.
225
226 version 1.0pre8              Sep 16 2002
227
228 * More fixes for subnets with prefixlength undivisible by 8.
229
230 * Added support for NetBSD and MacOS/X.
231
232 * Switched from undirected graphs to directed graphs to avoid certain race
233   conditions and improve scalability.
234
235 * Generalized broadcasting and forwarding of protocol messages.
236
237 * Cleanup of source code.
238
239
240 version 1.0pre7              Apr  7 2002
241
242 * Don't do blocking read()s when getting a signal.
243
244 * Remove RSA key checking code, since it sometimes thinks perfectly good RSA
245   keys are bad.
246
247 * Fix handling of subnets when prefixlength isn't divisible by 8.
248
249
250 version 1.0pre6              Mar 27 2002
251
252 * Improvement of redundant links:
253
254   * Non-blocking connects.
255   
256   * Protocol broadcast messages can no longer go into an infinite loop.
257   
258   * Graph algorithm updated to look harder for direct connections.
259
260 * Good support for routing IPv6 packets over the VPN. Works on Linux,
261   FreeBSD, possibly OpenBSD but not on Solaris.
262
263 * Support for tunnels over IPv6 networks. Works on all supported
264   operating systems.
265
266 * Optional compression of UDP connections using zlib.
267
268 * Optionally let UDP connections inherit TOS field of tunneled packets.
269
270 * Optionally start scripts when certain hosts become (un)reachable.
271
272
273 version 1.0pre5              Feb  9 2002
274
275 * Security enhancements:
276
277   * Added sequence number and optional message authentication code to
278     the packets.
279
280   * Configurable encryption cipher and digest algorithms.
281
282 * More robust handling of dis- and reconnects.
283
284 * Added a "switch" and a "hub" mode to allow bridging setups.
285
286 * Preliminary support for routing of IPv6 packets.
287
288 * Supports Linux, FreeBSD, OpenBSD and Solaris.
289
290
291 It looks like this might be the last release before 1.0.
292
293
294 version 1.0pre4              Jan 17 2001
295
296 * Updated documentation; the documentation now reflects the
297   configuration as it is.
298
299 * Some internal changes to make tinc scale better for large
300   networks, such as using AVL trees instead of linked lists for the
301   connection list.  
302
303 * RSA keys can be stored in separate files if needed.  See the
304   documentation for more information.
305
306 * tinc has now been reported to run on Linux PowerPC and FreeBSD x86.
307
308
309
310 version 1.0pre3              Oct 31 2000
311
312 * The protocol has been redesigned, and although some details are
313   still under discussion, this is secure.  Care has been taken to
314   resist most, if not all, attacks.
315   
316 * Unfortunately this protocol is not compatible with earlier versions,
317   nor are earlier versions compatible with this version.  Because the
318   older protocol has huge security flaws, we feel that not
319   implementing backwards compatibility is justified.
320
321 * Some data about the protocol:
322
323   * It uses public/private RSA keys for authentication (this is the
324     actual fix for the security hole).
325
326   * All cryptographic functions have been taken out of tinc, instead
327     it uses the OpenSSL library functions.
328
329   * Offers support for multiple subnets per tinc daemon.
330
331 * New is also the support for the universal tun/tap device.  This
332   means better portability to FreeBSD and Solaris.
333
334 * tinc is tested to compile on Solaris, Linux x86, Linux alpha.
335
336 * tinc now uses the OpenSSL library for cryptographic operations.
337   More information on getting and installing OpenSSL is in the manual.
338   This also means that the GMP library is no longer required.
339
340 * Further, thanks to Enrique Zanardi, we have Spanish messages; Matias
341   Carrasco provided us with a Spanish translation of the manual.
342
343
344 What still needs to be done before 1.0:
345
346 * Documentation.  Especially since the protocol has changed, and a lot
347   of configuration directives have been added.
348
349
350
351
352 version 1.0pre2              May 31 2000
353
354 * This version has been internationalized; and a Dutch translation has          
355   been included.                                                                
356                                                                                 
357 * Two configuration variables have been added:                                  
358   * VpnMask - the IP network mask for the entire VPN, not just our              
359     subnet (as given by MyVirtualIP).  The Redhat and Debian packages           
360     use this variable in their system startup scripts, but it is                
361     ignored by tinc.                                                            
362   * Hostnames - if set to `yes', look up the names of IP addresses              
363     trying to connect to us.  Default set to `no', to prevent lockups           
364     during lookups.                                                             
365                                                                                 
366 * The system startup scripts for Debian and Redhat use                          
367   /etc/tinc/nets.boot to find out which networks need to be started             
368   during system boot.                                                           
369                                                                                 
370 * Fixes to prevent denial of service attacks by sending random data             
371   after connecting (and even when the connection has been established),         
372   either random garbage or just nonsensical protocol fields.                    
373                                                                                 
374 * tinc will retry to connect upon startup, does not quit if it doesn't          
375   work the first time.                                                          
376                                                                                 
377 * Hosts that are disconnected implicitly if we lose a connection get            
378   deleted from the internal list, to prevent hogging eachother with             
379   add and delete requests when the connection is restored.                      
380                                                                                 
381                                                                                 
382 What still needs to be done before 1.0:                                         
383                                                                                 
384 * Documentation.                                                                
385 * Failover ConnectTo lines, try another one if the first doesn't work.          
386
387
388
389
390 version 1.0pre1              May 12 2000
391  * New meta-protocol
392  * Various other bugfixes
393  * Documentation updates
394
395 version 0.3.3                Feb  9 2000
396  * Fixed bug that made tinc stop working with latest kernels (Guus
397    Sliepen)
398  * Updated the manual
399
400 version 0.3.2                Nov 12 1999
401  * no more `Invalid filedescriptor' when working with multiple
402    connections
403  * forward unknown packets to uplink
404
405 version 0.3.1                Oct 20 1999
406  * fixed a bug where tinc would exit without a trace
407
408 version 0.3                  Aug 20 1999
409  * pings now work immediately
410  * all packet sizes get transmitted correctly
411
412 version 0.2.26               Aug 15 1999
413  * fixed some remaining bugs
414  * --sysconfdir works with configure
415  * last version before 0.3
416
417 version 0.2.25               Aug  8 1999
418  * improved stability, going towards 0.3 now.
419
420 version 0.2.24               Aug  7 1999
421  * added key aging, there's a new config variable, KeyExpire.
422  * updated man and info pages
423
424 version 0.2.23               Aug  5 1999
425  * all known bugs fixed, this is a candidate for 0.3
426
427 version 0.2.22               Apr 11 1999
428  * multiconnection thing is now working nearly perfect :)
429
430 version 0.2.21               Apr 10 1999
431  * You shouldn't notice a thing, but a lot has changed wrt key
432 management - except that it refuses to talk to versions < 0.2.20
433
434 version 0.2.20
435
436 version 0.2.19               Apr  3 1999
437  * don't install a libcipher.so
438
439 version 0.2.18               Apr  3 1999
440  * blowfish library dynamically loaded upon execution
441  * included Eric Young's IDEA library
442
443 version 0.2.17               Apr  1 1999
444  * tincd now re-executes itself in case of a segmentation fault.
445
446 version 0.2.16               Apr  1 1999
447  * wrote tincd.conf(5) man page, which still needs a lot of work.
448  * config file now accepts and tolerates spaces, and any integer base
449 for integer variables, and better error reporting. See
450 doc/tincd.conf.sample for an example.
451
452 version 0.2.15               Mar 29 1999
453  * fixed bugs
454
455 version 0.2.14               Feb 10 1999
456  * added --timeout flag and PingTimeout configuration
457  * did some first syslog cleanup work
458
459 version 0.2.13               Jan 23 1999
460  * bugfixes
461
462 version 0.2.12               Jan 23 1999
463  * fixed nauseating bug so that it would crash whenever a connection
464 got lost
465
466 version 0.2.11               Jan 22 1999
467  * framework for multiple connections has been done
468  * simple manpage for tincd
469
470 version 0.2.10               Jan 18 1999
471  * passphrase support added
472
473 version 0.2.9                Jan 13 1999
474  * bugs fixed.
475
476 version 0.2.8                Jan 11 1999
477  * a reworked protocol version
478  * a ping/pong system
479  * more reliable networking code
480  * automatic reconnection
481  * still does not work with more than one connection :)
482  * strips MAC addresses before sending, so there's less overhead, and
483 less redundancy
484
485 version 0.2.7                Jan  3 1999
486  * several updates to make extending more easy.
487
488 version 0.2.6                Dec 20 1998
489  * Point-to-Point connections have been established, including
490 blowfish encryption and a secret key-exchange.
491
492 version 0.2.5                Dec 16 1998
493  * Project renamed to tinc, in honour of TINC.
494
495 version 0.2.4                Dec 16 1998
496  * now it really does ;)
497
498 version 0.2.3                Nov 24 1998
499  * it sort of works now
500
501 version 0.2.2                Nov 20 1998
502  * uses GNU gmp.
503
504 version 0.2.1                Nov 14 1998
505
506  * Bare version.