MAINTAINER:=Daniel Golle <daniel@makrotopia.org>
-KERNEL_PATCHVER:=4.14
-KERNEL_TESTING_PATCHVER:=5.4
+KERNEL_PATCHVER:=5.4
include $(INCLUDE_DIR)/target.mk
+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_CPU_AUTO=y
-# CONFIG_ARCH_MULTI_V4 is not set
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-CONFIG_ARCH_MULTI_V5=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_OXNAS=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_LIBATA_LEDS=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PMU=y
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_CMDLINE_PARSER=y
-CONFIG_BLK_DEBUG_FS=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_SCSI_REQUEST=y
-# CONFIG_BPF_SYSCALL is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=64
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CMDLINE_PARTITION=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_OXNAS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_ARM926T=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZ4=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_DWMAC_DWC_QOS_ETH is not set
-CONFIG_DWMAC_GENERIC=y
-CONFIG_DWMAC_OXNAS=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ELF_CORE=y
-CONFIG_FAT_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FREEZER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HZ_FIXED=0
-CONFIG_ICPLUS_PHY=y
-CONFIG_INET_DIAG=y
-# CONFIG_INET_DIAG_DESTROY is not set
-# CONFIG_INET_RAW_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_KALLSYMS=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LIBFDT=y
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_OX810SE is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OXNAS_RPS_TIMER=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-# CONFIG_PCI_DOMAINS_GENERIC is not set
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_GENERIC_PHY=y
-CONFIG_PHY_OXNAS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_OXNAS=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_OXNAS=y
-CONFIG_PPS=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-# CONFIG_RCU_NEED_SEGCBLIST is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RCU_TRACE=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZ4=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_OXNAS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SIMPLE_PM_BUS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SOCK_DIAG=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRCU=y
-CONFIG_STACKTRACE=y
-# CONFIG_STAGING is not set
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TINY_SRCU=y
-CONFIG_TRACE_CLOCK=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_SUPPORT=y
-# CONFIG_USERIO is not set
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VERSATILE_FPGA_IRQ=y
-CONFIG_VERSATILE_FPGA_IRQ_NR=4
-CONFIG_VFAT_FS=y
-# CONFIG_VFP is not set
-# CONFIG_VLAN_8021Q is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_WATCHDOG is not set
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-/*
- * PCIe driver for PLX NAS782X SoCs
- *
- * Author: Ma Haijun <mahaijuns@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/mbus.h>
-#include <linux/mfd/syscon.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_gpio.h>
-#include <linux/of_irq.h>
-#include <linux/of_pci.h>
-#include <linux/of_platform.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/phy.h>
-#include <linux/phy/phy.h>
-#include <linux/regmap.h>
-#include <linux/reset.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-
-#define SYS_CTRL_HCSL_CTRL_REGOFFSET 0x114
-
-static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask)
-{
- u32 val = readl_relaxed(p);
-
- val &= ~mask;
- writel_relaxed(val, p);
-}
-
-static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask)
-{
- u32 val = readl_relaxed(p);
-
- val |= mask;
- writel_relaxed(val, p);
-}
-
-static inline void oxnas_register_value_mask(void __iomem *p,
- unsigned mask, unsigned new_value)
-{
- /* TODO sanity check mask & new_value = new_value */
- u32 val = readl_relaxed(p);
-
- val &= ~mask;
- val |= new_value;
- writel_relaxed(val, p);
-}
-
-#define VERSION_ID_MAGIC 0x082510b5
-#define LINK_UP_TIMEOUT_SECONDS 1
-#define NUM_CONTROLLERS 1
-
-enum {
- PCIE_DEVICE_TYPE_MASK = 0x0F,
- PCIE_DEVICE_TYPE_ENDPOINT = 0,
- PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1,
- PCIE_DEVICE_TYPE_ROOT = 4,
-
- PCIE_LTSSM = BIT(4),
- PCIE_READY_ENTR_L23 = BIT(9),
- PCIE_LINK_UP = BIT(11),
- PCIE_OBTRANS = BIT(12),
-};
-
-/* core config registers */
-enum {
- PCI_CONFIG_VERSION_DEVICEID = 0,
- PCI_CONFIG_COMMAND_STATUS = 4,
-};
-
-/* inbound config registers */
-enum {
- IB_ADDR_XLATE_ENABLE = 0xFC,
-
- /* bits */
- ENABLE_IN_ADDR_TRANS = BIT(0),
-};
-
-/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */
-enum {
- PCIE_POM0_MEM_ADDR = 0,
- PCIE_POM1_MEM_ADDR = 4,
- PCIE_IN0_MEM_ADDR = 8,
- PCIE_IN1_MEM_ADDR = 12,
- PCIE_IN_IO_ADDR = 16,
- PCIE_IN_CFG0_ADDR = 20,
- PCIE_IN_CFG1_ADDR = 24,
- PCIE_IN_MSG_ADDR = 28,
- PCIE_IN0_MEM_LIMIT = 32,
- PCIE_IN1_MEM_LIMIT = 36,
- PCIE_IN_IO_LIMIT = 40,
- PCIE_IN_CFG0_LIMIT = 44,
- PCIE_IN_CFG1_LIMIT = 48,
- PCIE_IN_MSG_LIMIT = 52,
- PCIE_AHB_SLAVE_CTRL = 56,
-
- PCIE_SLAVE_BE_SHIFT = 22,
-};
-
-#define PCIE_SLAVE_BE(val) ((val) << PCIE_SLAVE_BE_SHIFT)
-#define PCIE_SLAVE_BE_MASK PCIE_SLAVE_BE(0xF)
-
-struct oxnas_pcie_shared {
- /* seems all access are serialized, no lock required */
- int refcount;
-};
-
-/* Structure representing one PCIe interfaces */
-struct oxnas_pcie {
- void __iomem *cfgbase;
- void __iomem *base;
- void __iomem *inbound;
- struct regmap *sys_ctrl;
- unsigned int outbound_offset;
- unsigned int pcie_ctrl_offset;
- struct phy *phy;
- int haslink;
- struct platform_device *pdev;
- struct resource io;
- struct resource cfg;
- struct resource pre_mem; /* prefetchable */
- struct resource non_mem; /* non-prefetchable */
- struct resource busn; /* max available bus numbers */
- int card_reset; /* gpio pin, optional */
- unsigned hcsl_en; /* hcsl pci enable bit */
- struct clk *clk;
- struct clk *busclk; /* for pcie bus, actually the PLLB */
- void *private_data[1];
- spinlock_t lock;
-};
-
-static struct oxnas_pcie_shared pcie_shared = {
- .refcount = 0,
-};
-
-static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys)
-{
- return sys->private_data;
-}
-
-
-static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes)
-{
- regmap_update_bits(pcie->sys_ctrl, pcie->outbound_offset + PCIE_AHB_SLAVE_CTRL,
- PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes));
- wmb();
-}
-
-static int oxnas_pcie_link_up(struct oxnas_pcie *pcie)
-{
- unsigned long end;
- unsigned int val;
-
- /* Poll for PCIE link up */
- end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ);
- while (!time_after(jiffies, end)) {
- regmap_read(pcie->sys_ctrl, pcie->pcie_ctrl_offset, &val);
- if (val & PCIE_LINK_UP)
- return 1;
- }
- return 0;
-}
-
-static void oxnas_pcie_setup_hw(struct oxnas_pcie *pcie)
-{
- /* We won't have any inbound address translation. This allows PCI
- * devices to access anywhere in the AHB address map. Might be regarded
- * as a bit dangerous, but let's get things working before we worry
- * about that
- */
- oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE,
- ENABLE_IN_ADDR_TRANS);
- wmb();
-
- /*
- * Program outbound translation windows
- *
- * Outbound window is what is referred to as "PCI client" region in HRM
- *
- * Could use the larger alternative address space to get >>64M regions
- * for graphics cards etc., but will not bother at this point.
- *
- * IP bug means that AMBA window size must be a power of 2
- *
- * Set mem0 window for first 16MB of outbound window non-prefetchable
- * Set mem1 window for second 16MB of outbound window prefetchable
- * Set io window for next 16MB of outbound window
- * Set cfg0 for final 1MB of outbound window
- *
- * Ignore mem1, cfg1 and msg windows for now as no obvious use cases for
- * 820 that would need them
- *
- * Probably ideally want no offset between mem0 window start as seen by
- * ARM and as seen on PCI bus and get Linux to assign memory regions to
- * PCI devices using the same "PCI client" region start address as seen
- * by ARM
- */
-
- /* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_ADDR, pcie->non_mem.start);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_LIMIT, pcie->non_mem.end);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM0_MEM_ADDR, pcie->non_mem.start);
-
- /* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_ADDR, pcie->pre_mem.start);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_LIMIT, pcie->pre_mem.end);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM1_MEM_ADDR, pcie->pre_mem.start);
-
- /* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_ADDR, pcie->io.start);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_LIMIT, pcie->io.end);
-
-
- /* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_ADDR, pcie->cfg.start);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_LIMIT, pcie->cfg.end);
- wmb();
-
- /* Enable outbound address translation */
- regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset, PCIE_OBTRANS, PCIE_OBTRANS);
- wmb();
-
- /*
- * Program PCIe command register for core to:
- * enable memory space
- * enable bus master
- * enable io
- */
- writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS);
- /* which is which */
- wmb();
-}
-
-static unsigned oxnas_pcie_cfg_to_offset(
- struct pci_sys_data *sys,
- unsigned char bus_number,
- unsigned int devfn,
- int where)
-{
- unsigned int function = PCI_FUNC(devfn);
- unsigned int slot = PCI_SLOT(devfn);
- unsigned char bus_number_offset;
-
- bus_number_offset = bus_number - sys->busnr;
-
- /*
- * We'll assume for now that the offset, function, slot, bus encoding
- * should map onto linear, contiguous addresses in PCIe config space,
- * albeit that the majority will be unused as only slot 0 is valid for
- * any PCIe bus and most devices have only function 0
- *
- * Could be that PCIe in fact works by not encoding the slot number into
- * the config space address as it's known that only slot 0 is valid.
- * We'll have to experiment if/when we get a PCIe switch connected to
- * the PCIe host
- */
- return (bus_number_offset << 20) | (slot << 15) | (function << 12) |
- (where & ~3);
-}
-
-/* PCI configuration space write function */
-static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
- int where, int size, u32 val)
-{
- unsigned long flags;
- struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
- unsigned offset;
- u32 value;
- u32 lanes;
-
- /* Only a single device per bus for PCIe point-to-point links */
- if (PCI_SLOT(devfn) > 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (!pcie->haslink)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
- where);
-
- value = val << (8 * (where & 3));
- lanes = (0xf >> (4-size)) << (where & 3);
- /* it race with mem and io write, but the possibility is low, normally
- * all config writes happens at driver initialize stage, wont interleave
- * with others.
- * and many pcie cards use dword (4bytes) access mem/io access only,
- * so not bother to copy that ugly work-around now. */
- spin_lock_irqsave(&pcie->lock, flags);
- set_out_lanes(pcie, lanes);
- writel_relaxed(value, pcie->cfgbase + offset);
- set_out_lanes(pcie, 0xf);
- spin_unlock_irqrestore(&pcie->lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/* PCI configuration space read function */
-static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
- int size, u32 *val)
-{
- struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
- unsigned offset;
- u32 value;
- u32 left_bytes, right_bytes;
-
- /* Only a single device per bus for PCIe point-to-point links */
- if (PCI_SLOT(devfn) > 0) {
- *val = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- if (!pcie->haslink) {
- *val = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
- where);
- value = readl_relaxed(pcie->cfgbase + offset);
- left_bytes = where & 3;
- right_bytes = 4 - left_bytes - size;
- value <<= right_bytes * 8;
- value >>= (left_bytes + right_bytes) * 8;
- *val = value;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops oxnas_pcie_ops = {
- .read = oxnas_pcie_rd_conf,
- .write = oxnas_pcie_wr_conf,
-};
-
-static int oxnas_pcie_setup(int nr, struct pci_sys_data *sys)
-{
- struct oxnas_pcie *pcie = sys_to_pcie(sys);
-
- pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset);
- pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset);
- pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset);
- pci_add_resource(&sys->resources, &pcie->busn);
- if (sys->busnr == 0) { /* default one */
- sys->busnr = pcie->busn.start;
- }
- /* do not use devm_ioremap_resource, it does not like cfg resource */
- pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start,
- resource_size(&pcie->cfg));
- if (!pcie->cfgbase)
- return -ENOMEM;
-
- oxnas_pcie_setup_hw(pcie);
-
- return 1;
-}
-
-static void oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie)
-{
- struct hw_pci hw;
- int i;
-
- memset(&hw, 0, sizeof(hw));
- for (i = 0; i < NUM_CONTROLLERS; i++)
- pcie->private_data[i] = pcie;
-
- hw.nr_controllers = NUM_CONTROLLERS;
-/* I think use stack pointer is a bad idea though it is valid in this case */
- hw.private_data = pcie->private_data;
- hw.setup = oxnas_pcie_setup;
- hw.map_irq = of_irq_parse_and_map_pci;
- hw.ops = &oxnas_pcie_ops;
-
- /* pass dev to maintain of tree, interrupt mapping rely on this */
- pci_common_init_dev(dev, &hw);
-}
-
-static int oxnas_pcie_shared_init(struct platform_device *pdev, struct oxnas_pcie *pcie)
-{
- if (++pcie_shared.refcount == 1) {
- phy_init(pcie->phy);
- phy_power_on(pcie->phy);
- return 0;
- } else {
- return 0;
- }
-}
-
-#if 0
-/* maybe we will call it when enter low power state */
-static void oxnas_pcie_shared_deinit(struct platform_device *pdev)
-{
- if (--pcie_shared.refcount == 0) {
- /* no cleanup needed */;
- }
-}
-#endif
-
-static int
-oxnas_pcie_map_registers(struct platform_device *pdev,
- struct device_node *np,
- struct oxnas_pcie *pcie)
-{
- struct resource regs;
- int ret = 0;
- u32 outbound_ctrl_offset;
- u32 pcie_ctrl_offset;
-
- ret = of_address_to_resource(np, 0, ®s);
- if (ret) {
- dev_err(&pdev->dev, "failed to parse base register space\n");
- return -EINVAL;
- }
-
- pcie->base = devm_ioremap_resource(&pdev->dev, ®s);
- if (!pcie->base) {
- dev_err(&pdev->dev, "failed to map base register space\n");
- return -ENOMEM;
- }
-
- ret = of_address_to_resource(np, 1, ®s);
- if (ret) {
- dev_err(&pdev->dev, "failed to parse inbound register space\n");
- return -EINVAL;
- }
-
- pcie->inbound = devm_ioremap_resource(&pdev->dev, ®s);
- if (!pcie->inbound) {
- dev_err(&pdev->dev, "failed to map inbound register space\n");
- return -ENOMEM;
- }
-
- pcie->phy = devm_of_phy_get(&pdev->dev, np, NULL);
- if (IS_ERR(pcie->phy)) {
- if (PTR_ERR(pcie->phy) == -EPROBE_DEFER) {
- dev_err(&pdev->dev, "failed to probe phy\n");
- return PTR_ERR(pcie->phy);
- }
- dev_warn(&pdev->dev, "phy not attached\n");
- pcie->phy = NULL;
- }
-
- if (of_property_read_u32(np, "plxtech,pcie-outbound-offset",
- &outbound_ctrl_offset)) {
- dev_err(&pdev->dev, "failed to parse outbound register offset\n");
- return -EINVAL;
- }
- pcie->outbound_offset = outbound_ctrl_offset;
-
- if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset",
- &pcie_ctrl_offset)) {
- dev_err(&pdev->dev, "failed to parse pcie-ctrl register offset\n");
- return -EINVAL;
- }
- pcie->pcie_ctrl_offset = pcie_ctrl_offset;
-
- return 0;
-}
-
-static int oxnas_pcie_init_res(struct platform_device *pdev,
- struct oxnas_pcie *pcie,
- struct device_node *np)
-{
- struct of_pci_range range;
- struct of_pci_range_parser parser;
- int ret;
-
- if (of_pci_range_parser_init(&parser, np))
- return -EINVAL;
-
- /* Get the I/O and memory ranges from DT */
- for_each_of_pci_range(&parser, &range) {
-
- unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
- if (restype == IORESOURCE_IO) {
- of_pci_range_to_resource(&range, np, &pcie->io);
- pcie->io.name = "I/O";
- }
- if (restype == IORESOURCE_MEM) {
- if (range.flags & IORESOURCE_PREFETCH) {
- of_pci_range_to_resource(&range, np, &pcie->pre_mem);
- pcie->pre_mem.name = "PRE MEM";
- } else {
- of_pci_range_to_resource(&range, np, &pcie->non_mem);
- pcie->non_mem.name = "NON MEM";
- }
-
- }
- if (restype == 0)
- of_pci_range_to_resource(&range, np, &pcie->cfg);
- }
-
- /* Get the bus range */
- ret = of_pci_parse_bus_range(np, &pcie->busn);
-
- if (ret) {
- dev_err(&pdev->dev, "failed to parse bus-range property: %d\n",
- ret);
- return ret;
- }
-
- pcie->card_reset = of_get_gpio(np, 0);
- if (pcie->card_reset < 0)
- dev_info(&pdev->dev, "card reset gpio pin not exists\n");
-
- if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en))
- return -EINVAL;
-
- pcie->clk = of_clk_get_by_name(np, "pcie");
- if (IS_ERR(pcie->clk)) {
- return PTR_ERR(pcie->clk);
- }
-
- pcie->busclk = of_clk_get_by_name(np, "busclk");
- if (IS_ERR(pcie->busclk)) {
- clk_put(pcie->clk);
- return PTR_ERR(pcie->busclk);
- }
-
- return 0;
-}
-
-static void oxnas_pcie_init_hw(struct platform_device *pdev,
- struct oxnas_pcie *pcie)
-{
- u32 version_id;
- int ret;
-
- clk_prepare_enable(pcie->busclk);
-
- /* reset PCIe cards use hard-wired gpio pin */
- if (pcie->card_reset >= 0 &&
- !gpio_direction_output(pcie->card_reset, 0)) {
- wmb();
- mdelay(10);
- /* must tri-state the pin to pull it up */
- gpio_direction_input(pcie->card_reset);
- wmb();
- mdelay(100);
- }
-
- /* ToDo: use phy power-on port... */
- regmap_update_bits(pcie->sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET,
- BIT(pcie->hcsl_en), BIT(pcie->hcsl_en));
-
- /* core */
- ret = device_reset(&pdev->dev);
- if (ret) {
- dev_err(&pdev->dev, "core reset failed %d\n", ret);
- return;
- }
-
- /* Start PCIe core clocks */
- clk_prepare_enable(pcie->clk);
-
- version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID);
- dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id);
-
- if (version_id != VERSION_ID_MAGIC) {
- dev_info(&pdev->dev, "PCIe controller not found\n");
- pcie->haslink = 0;
- return;
- }
-
- /* allow entry to L23 state */
- regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
- PCIE_READY_ENTR_L23, PCIE_READY_ENTR_L23);
-
- /* Set PCIe core into RootCore mode */
- regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
- PCIE_DEVICE_TYPE_MASK, PCIE_DEVICE_TYPE_ROOT);
- wmb();
-
- /* Bring up the PCI core */
- regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
- PCIE_LTSSM, PCIE_LTSSM);
- wmb();
-}
-
-static int oxnas_pcie_probe(struct platform_device *pdev)
-{
- struct oxnas_pcie *pcie;
- struct device_node *np = pdev->dev.of_node;
- int ret;
-
- pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie),
- GFP_KERNEL);
- if (!pcie)
- return -ENOMEM;
-
- pcie->pdev = pdev;
- pcie->haslink = 1;
- spin_lock_init(&pcie->lock);
-
- pcie->sys_ctrl = syscon_regmap_lookup_by_compatible("oxsemi,ox820-sys-ctrl");
- if (IS_ERR(pcie->sys_ctrl))
- return PTR_ERR(pcie->sys_ctrl);
-
- ret = oxnas_pcie_init_res(pdev, pcie, np);
- if (ret)
- return ret;
- if (pcie->card_reset >= 0) {
- ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN,
- dev_name(&pdev->dev));
- if (ret) {
- dev_err(&pdev->dev, "cannot request gpio pin %d\n",
- pcie->card_reset);
- return ret;
- }
- }
-
- ret = oxnas_pcie_map_registers(pdev, np, pcie);
- if (ret) {
- dev_err(&pdev->dev, "cannot map registers\n");
- goto err_free_gpio;
- }
-
- ret = oxnas_pcie_shared_init(pdev, pcie);
- if (ret)
- goto err_free_gpio;
-
- /* if hw not found, haslink cleared */
- oxnas_pcie_init_hw(pdev, pcie);
-
- if (pcie->haslink && oxnas_pcie_link_up(pcie)) {
- pcie->haslink = 1;
- dev_info(&pdev->dev, "link up\n");
- } else {
- pcie->haslink = 0;
- dev_info(&pdev->dev, "link down\n");
- }
- /* should we register our controller even when pcie->haslink is 0 ? */
- /* register the controller with framework */
- oxnas_pcie_enable(&pdev->dev, pcie);
-
- return 0;
-
-err_free_gpio:
- if (pcie->card_reset)
- gpio_free(pcie->card_reset);
-
- return ret;
-}
-
-static const struct of_device_id oxnas_pcie_of_match_table[] = {
- { .compatible = "plxtech,nas782x-pcie", },
- {},
-};
-
-static struct platform_driver oxnas_pcie_driver = {
- .driver = {
- .name = "oxnas-pcie",
- .suppress_bind_attrs = true,
- .of_match_table = oxnas_pcie_of_match_table,
- },
- .probe = oxnas_pcie_probe,
-};
-
-builtin_platform_driver(oxnas_pcie_driver);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 Daniel Golle <daniel@makrotopia.org>
- *
- */
-
-#include <dt-bindings/phy/phy.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/reset.h>
-
-#define ADDR_VAL(val) ((val) & 0xFFFF)
-#define DATA_VAL(val) ((val) & 0xFFFF)
-
-#define SYS_CTRL_HCSL_CTRL_REGOFFSET 0x114
-
-enum {
- HCSL_BIAS_ON = BIT(0),
- HCSL_PCIE_EN = BIT(1),
- HCSL_PCIEA_EN = BIT(2),
- HCSL_PCIEB_EN = BIT(3),
-};
-
-enum {
- /* pcie phy reg offset */
- PHY_ADDR = 0,
- PHY_DATA = 4,
- /* phy data reg bits */
- READ_EN = BIT(16),
- WRITE_EN = BIT(17),
- CAP_DATA = BIT(18),
-};
-
-struct oxnas_pcie_phy {
- struct device *dev;
- void __iomem *membase;
- const struct phy_ops *ops;
- struct regmap *sys_ctrl;
-};
-
-static int oxnas_pcie_phy_init(struct phy *phy)
-{
- struct oxnas_pcie_phy *pciephy = phy_get_drvdata(phy);
- struct reset_control *rstc;
- int ret;
-
- /* generate clocks from HCSL buffers, shared parts */
- regmap_write(pciephy->sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET, HCSL_BIAS_ON|HCSL_PCIE_EN);
-
- /* Ensure PCIe PHY is properly reset */
- rstc = reset_control_get(pciephy->dev, "phy");
- if (IS_ERR(rstc)) {
- ret = PTR_ERR(rstc);
- } else {
- ret = reset_control_reset(rstc);
- reset_control_put(rstc);
- }
-
- if (ret) {
- dev_err(pciephy->dev, "phy reset failed %d\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-static int oxnas_pcie_phy_power_on(struct phy *phy)
-{
- struct oxnas_pcie_phy *pciephy = phy_get_drvdata(phy);
-
- /* Enable PCIe Pre-Emphasis: What these value means? */
- writel(ADDR_VAL(0x0014), pciephy->membase + PHY_ADDR);
- writel(DATA_VAL(0xce10) | CAP_DATA, pciephy->membase + PHY_DATA);
- writel(DATA_VAL(0xce10) | WRITE_EN, pciephy->membase + PHY_DATA);
-
- writel(ADDR_VAL(0x2004), pciephy->membase + PHY_ADDR);
- writel(DATA_VAL(0x82c7) | CAP_DATA, pciephy->membase + PHY_DATA);
- writel(DATA_VAL(0x82c7) | WRITE_EN, pciephy->membase + PHY_DATA);
-
- return 0;
-}
-
-static const struct phy_ops ops = {
- .init = oxnas_pcie_phy_init,
- .power_on = oxnas_pcie_phy_power_on,
- .owner = THIS_MODULE,
-};
-
-static int oxnas_pcie_phy_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device_node *np = pdev->dev.of_node;
- struct phy *generic_phy;
- struct phy_provider *phy_provider;
- struct oxnas_pcie_phy *pciephy;
- struct regmap *sys_ctrl;
- void __iomem *membase;
-
- membase = of_iomap(np, 0);
- if (IS_ERR(membase))
- return PTR_ERR(membase);
-
- sys_ctrl = syscon_regmap_lookup_by_compatible("oxsemi,ox820-sys-ctrl");
- if (IS_ERR(sys_ctrl)) {
- dev_err(dev, "Cannot find OX820 SYSCRTL\n");
- return PTR_ERR(sys_ctrl);
- }
-
- pciephy = devm_kzalloc(dev, sizeof(*pciephy), GFP_KERNEL);
- if (!pciephy)
- return -ENOMEM;
-
- pciephy->sys_ctrl = sys_ctrl;
- pciephy->membase = membase;
- pciephy->dev = dev;
- pciephy->ops = &ops;
-
- generic_phy = devm_phy_create(dev, dev->of_node, pciephy->ops);
- if (IS_ERR(generic_phy)) {
- dev_err(dev, "failed to create PHY\n");
- return PTR_ERR(generic_phy);
- }
-
- phy_set_drvdata(generic_phy, pciephy);
- phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-
- return PTR_ERR_OR_ZERO(phy_provider);
-}
-
-static const struct of_device_id oxnas_pcie_phy_id_table[] = {
- { .compatible = "oxsemi,ox820-pcie-phy" },
- { },
-};
-
-static struct platform_driver oxnas_pcie_phy_driver = {
- .probe = oxnas_pcie_phy_probe,
- .driver = {
- .name = "ox820-pcie-phy",
- .of_match_table = oxnas_pcie_phy_id_table,
- },
-};
-
-builtin_platform_driver(oxnas_pcie_phy_driver);
+++ /dev/null
-/*
- * PCIe driver for PLX NAS782X SoCs
- *
- * Author: Ma Haijun <mahaijuns@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/mbus.h>
-#include <linux/mfd/syscon.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_gpio.h>
-#include <linux/of_irq.h>
-#include <linux/of_pci.h>
-#include <linux/of_platform.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/phy.h>
-#include <linux/phy/phy.h>
-#include <linux/regmap.h>
-#include <linux/reset.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-
-#include "../pci.h"
-
-#define SYS_CTRL_HCSL_CTRL_REGOFFSET 0x114
-
-static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask)
-{
- u32 val = readl_relaxed(p);
-
- val &= ~mask;
- writel_relaxed(val, p);
-}
-
-static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask)
-{
- u32 val = readl_relaxed(p);
-
- val |= mask;
- writel_relaxed(val, p);
-}
-
-static inline void oxnas_register_value_mask(void __iomem *p,
- unsigned mask, unsigned new_value)
-{
- /* TODO sanity check mask & new_value = new_value */
- u32 val = readl_relaxed(p);
-
- val &= ~mask;
- val |= new_value;
- writel_relaxed(val, p);
-}
-
-#define VERSION_ID_MAGIC 0x082510b5
-#define LINK_UP_TIMEOUT_SECONDS 1
-#define NUM_CONTROLLERS 1
-
-enum {
- PCIE_DEVICE_TYPE_MASK = 0x0F,
- PCIE_DEVICE_TYPE_ENDPOINT = 0,
- PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1,
- PCIE_DEVICE_TYPE_ROOT = 4,
-
- PCIE_LTSSM = BIT(4),
- PCIE_READY_ENTR_L23 = BIT(9),
- PCIE_LINK_UP = BIT(11),
- PCIE_OBTRANS = BIT(12),
-};
-
-/* core config registers */
-enum {
- PCI_CONFIG_VERSION_DEVICEID = 0,
- PCI_CONFIG_COMMAND_STATUS = 4,
-};
-
-/* inbound config registers */
-enum {
- IB_ADDR_XLATE_ENABLE = 0xFC,
-
- /* bits */
- ENABLE_IN_ADDR_TRANS = BIT(0),
-};
-
-/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */
-enum {
- PCIE_POM0_MEM_ADDR = 0,
- PCIE_POM1_MEM_ADDR = 4,
- PCIE_IN0_MEM_ADDR = 8,
- PCIE_IN1_MEM_ADDR = 12,
- PCIE_IN_IO_ADDR = 16,
- PCIE_IN_CFG0_ADDR = 20,
- PCIE_IN_CFG1_ADDR = 24,
- PCIE_IN_MSG_ADDR = 28,
- PCIE_IN0_MEM_LIMIT = 32,
- PCIE_IN1_MEM_LIMIT = 36,
- PCIE_IN_IO_LIMIT = 40,
- PCIE_IN_CFG0_LIMIT = 44,
- PCIE_IN_CFG1_LIMIT = 48,
- PCIE_IN_MSG_LIMIT = 52,
- PCIE_AHB_SLAVE_CTRL = 56,
-
- PCIE_SLAVE_BE_SHIFT = 22,
-};
-
-#define PCIE_SLAVE_BE(val) ((val) << PCIE_SLAVE_BE_SHIFT)
-#define PCIE_SLAVE_BE_MASK PCIE_SLAVE_BE(0xF)
-
-struct oxnas_pcie_shared {
- /* seems all access are serialized, no lock required */
- int refcount;
-};
-
-/* Structure representing one PCIe interfaces */
-struct oxnas_pcie {
- void __iomem *cfgbase;
- void __iomem *base;
- void __iomem *inbound;
- struct regmap *sys_ctrl;
- unsigned int outbound_offset;
- unsigned int pcie_ctrl_offset;
- struct phy *phy;
- int haslink;
- struct platform_device *pdev;
- struct resource io;
- struct resource cfg;
- struct resource pre_mem; /* prefetchable */
- struct resource non_mem; /* non-prefetchable */
- struct resource busn; /* max available bus numbers */
- int card_reset; /* gpio pin, optional */
- unsigned hcsl_en; /* hcsl pci enable bit */
- struct clk *clk;
- struct clk *busclk; /* for pcie bus, actually the PLLB */
- void *private_data[1];
- spinlock_t lock;
-};
-
-static struct oxnas_pcie_shared pcie_shared = {
- .refcount = 0,
-};
-
-static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys)
-{
- return sys->private_data;
-}
-
-
-static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes)
-{
- regmap_update_bits(pcie->sys_ctrl, pcie->outbound_offset + PCIE_AHB_SLAVE_CTRL,
- PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes));
- wmb();
-}
-
-static int oxnas_pcie_link_up(struct oxnas_pcie *pcie)
-{
- unsigned long end;
- unsigned int val;
-
- /* Poll for PCIE link up */
- end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ);
- while (!time_after(jiffies, end)) {
- regmap_read(pcie->sys_ctrl, pcie->pcie_ctrl_offset, &val);
- if (val & PCIE_LINK_UP)
- return 1;
- }
- return 0;
-}
-
-static void oxnas_pcie_setup_hw(struct oxnas_pcie *pcie)
-{
- /* We won't have any inbound address translation. This allows PCI
- * devices to access anywhere in the AHB address map. Might be regarded
- * as a bit dangerous, but let's get things working before we worry
- * about that
- */
- oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE,
- ENABLE_IN_ADDR_TRANS);
- wmb();
-
- /*
- * Program outbound translation windows
- *
- * Outbound window is what is referred to as "PCI client" region in HRM
- *
- * Could use the larger alternative address space to get >>64M regions
- * for graphics cards etc., but will not bother at this point.
- *
- * IP bug means that AMBA window size must be a power of 2
- *
- * Set mem0 window for first 16MB of outbound window non-prefetchable
- * Set mem1 window for second 16MB of outbound window prefetchable
- * Set io window for next 16MB of outbound window
- * Set cfg0 for final 1MB of outbound window
- *
- * Ignore mem1, cfg1 and msg windows for now as no obvious use cases for
- * 820 that would need them
- *
- * Probably ideally want no offset between mem0 window start as seen by
- * ARM and as seen on PCI bus and get Linux to assign memory regions to
- * PCI devices using the same "PCI client" region start address as seen
- * by ARM
- */
-
- /* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_ADDR, pcie->non_mem.start);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_LIMIT, pcie->non_mem.end);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM0_MEM_ADDR, pcie->non_mem.start);
-
- /* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_ADDR, pcie->pre_mem.start);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_LIMIT, pcie->pre_mem.end);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM1_MEM_ADDR, pcie->pre_mem.start);
-
- /* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_ADDR, pcie->io.start);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_LIMIT, pcie->io.end);
-
-
- /* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_ADDR, pcie->cfg.start);
- regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_LIMIT, pcie->cfg.end);
- wmb();
-
- /* Enable outbound address translation */
- regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset, PCIE_OBTRANS, PCIE_OBTRANS);
- wmb();
-
- /*
- * Program PCIe command register for core to:
- * enable memory space
- * enable bus master
- * enable io
- */
- writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS);
- /* which is which */
- wmb();
-}
-
-static unsigned oxnas_pcie_cfg_to_offset(
- struct pci_sys_data *sys,
- unsigned char bus_number,
- unsigned int devfn,
- int where)
-{
- unsigned int function = PCI_FUNC(devfn);
- unsigned int slot = PCI_SLOT(devfn);
- unsigned char bus_number_offset;
-
- bus_number_offset = bus_number - sys->busnr;
-
- /*
- * We'll assume for now that the offset, function, slot, bus encoding
- * should map onto linear, contiguous addresses in PCIe config space,
- * albeit that the majority will be unused as only slot 0 is valid for
- * any PCIe bus and most devices have only function 0
- *
- * Could be that PCIe in fact works by not encoding the slot number into
- * the config space address as it's known that only slot 0 is valid.
- * We'll have to experiment if/when we get a PCIe switch connected to
- * the PCIe host
- */
- return (bus_number_offset << 20) | (slot << 15) | (function << 12) |
- (where & ~3);
-}
-
-/* PCI configuration space write function */
-static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
- int where, int size, u32 val)
-{
- unsigned long flags;
- struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
- unsigned offset;
- u32 value;
- u32 lanes;
-
- /* Only a single device per bus for PCIe point-to-point links */
- if (PCI_SLOT(devfn) > 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (!pcie->haslink)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
- where);
-
- value = val << (8 * (where & 3));
- lanes = (0xf >> (4-size)) << (where & 3);
- /* it race with mem and io write, but the possibility is low, normally
- * all config writes happens at driver initialize stage, wont interleave
- * with others.
- * and many pcie cards use dword (4bytes) access mem/io access only,
- * so not bother to copy that ugly work-around now. */
- spin_lock_irqsave(&pcie->lock, flags);
- set_out_lanes(pcie, lanes);
- writel_relaxed(value, pcie->cfgbase + offset);
- set_out_lanes(pcie, 0xf);
- spin_unlock_irqrestore(&pcie->lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/* PCI configuration space read function */
-static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
- int size, u32 *val)
-{
- struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
- unsigned offset;
- u32 value;
- u32 left_bytes, right_bytes;
-
- /* Only a single device per bus for PCIe point-to-point links */
- if (PCI_SLOT(devfn) > 0) {
- *val = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- if (!pcie->haslink) {
- *val = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
- where);
- value = readl_relaxed(pcie->cfgbase + offset);
- left_bytes = where & 3;
- right_bytes = 4 - left_bytes - size;
- value <<= right_bytes * 8;
- value >>= (left_bytes + right_bytes) * 8;
- *val = value;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops oxnas_pcie_ops = {
- .read = oxnas_pcie_rd_conf,
- .write = oxnas_pcie_wr_conf,
-};
-
-static int oxnas_pcie_setup(int nr, struct pci_sys_data *sys)
-{
- struct oxnas_pcie *pcie = sys_to_pcie(sys);
-
- pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset);
- pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset);
- pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset);
- pci_add_resource(&sys->resources, &pcie->busn);
- if (sys->busnr == 0) { /* default one */
- sys->busnr = pcie->busn.start;
- }
- /* do not use devm_ioremap_resource, it does not like cfg resource */
- pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start,
- resource_size(&pcie->cfg));
- if (!pcie->cfgbase)
- return -ENOMEM;
-
- oxnas_pcie_setup_hw(pcie);
-
- return 1;
-}
-
-static void oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie)
-{
- struct hw_pci hw;
- int i;
-
- memset(&hw, 0, sizeof(hw));
- for (i = 0; i < NUM_CONTROLLERS; i++)
- pcie->private_data[i] = pcie;
-
- hw.nr_controllers = NUM_CONTROLLERS;
-/* I think use stack pointer is a bad idea though it is valid in this case */
- hw.private_data = pcie->private_data;
- hw.setup = oxnas_pcie_setup;
- hw.map_irq = of_irq_parse_and_map_pci;
- hw.ops = &oxnas_pcie_ops;
-
- /* pass dev to maintain of tree, interrupt mapping rely on this */
- pci_common_init_dev(dev, &hw);
-}
-
-static int oxnas_pcie_shared_init(struct platform_device *pdev, struct oxnas_pcie *pcie)
-{
- if (++pcie_shared.refcount == 1) {
- phy_init(pcie->phy);
- phy_power_on(pcie->phy);
- return 0;
- } else {
- return 0;
- }
-}
-
-#if 0
-/* maybe we will call it when enter low power state */
-static void oxnas_pcie_shared_deinit(struct platform_device *pdev)
-{
- if (--pcie_shared.refcount == 0) {
- /* no cleanup needed */;
- }
-}
-#endif
-
-static int
-oxnas_pcie_map_registers(struct platform_device *pdev,
- struct device_node *np,
- struct oxnas_pcie *pcie)
-{
- struct resource regs;
- int ret = 0;
- u32 outbound_ctrl_offset;
- u32 pcie_ctrl_offset;
-
- ret = of_address_to_resource(np, 0, ®s);
- if (ret) {
- dev_err(&pdev->dev, "failed to parse base register space\n");
- return -EINVAL;
- }
-
- pcie->base = devm_ioremap_resource(&pdev->dev, ®s);
- if (!pcie->base) {
- dev_err(&pdev->dev, "failed to map base register space\n");
- return -ENOMEM;
- }
-
- ret = of_address_to_resource(np, 1, ®s);
- if (ret) {
- dev_err(&pdev->dev, "failed to parse inbound register space\n");
- return -EINVAL;
- }
-
- pcie->inbound = devm_ioremap_resource(&pdev->dev, ®s);
- if (!pcie->inbound) {
- dev_err(&pdev->dev, "failed to map inbound register space\n");
- return -ENOMEM;
- }
-
- pcie->phy = devm_of_phy_get(&pdev->dev, np, NULL);
- if (IS_ERR(pcie->phy)) {
- if (PTR_ERR(pcie->phy) == -EPROBE_DEFER) {
- dev_err(&pdev->dev, "failed to probe phy\n");
- return PTR_ERR(pcie->phy);
- }
- dev_warn(&pdev->dev, "phy not attached\n");
- pcie->phy = NULL;
- }
-
- if (of_property_read_u32(np, "plxtech,pcie-outbound-offset",
- &outbound_ctrl_offset)) {
- dev_err(&pdev->dev, "failed to parse outbound register offset\n");
- return -EINVAL;
- }
- pcie->outbound_offset = outbound_ctrl_offset;
-
- if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset",
- &pcie_ctrl_offset)) {
- dev_err(&pdev->dev, "failed to parse pcie-ctrl register offset\n");
- return -EINVAL;
- }
- pcie->pcie_ctrl_offset = pcie_ctrl_offset;
-
- return 0;
-}
-
-static int oxnas_pcie_init_res(struct platform_device *pdev,
- struct oxnas_pcie *pcie,
- struct device_node *np)
-{
- struct of_pci_range range;
- struct of_pci_range_parser parser;
- int ret;
-
- if (of_pci_range_parser_init(&parser, np))
- return -EINVAL;
-
- /* Get the I/O and memory ranges from DT */
- for_each_of_pci_range(&parser, &range) {
-
- unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
- if (restype == IORESOURCE_IO) {
- of_pci_range_to_resource(&range, np, &pcie->io);
- pcie->io.name = "I/O";
- }
- if (restype == IORESOURCE_MEM) {
- if (range.flags & IORESOURCE_PREFETCH) {
- of_pci_range_to_resource(&range, np, &pcie->pre_mem);
- pcie->pre_mem.name = "PRE MEM";
- } else {
- of_pci_range_to_resource(&range, np, &pcie->non_mem);
- pcie->non_mem.name = "NON MEM";
- }
-
- }
- if (restype == 0)
- of_pci_range_to_resource(&range, np, &pcie->cfg);
- }
-
- /* Get the bus range */
- ret = of_pci_parse_bus_range(np, &pcie->busn);
-
- if (ret) {
- dev_err(&pdev->dev, "failed to parse bus-range property: %d\n",
- ret);
- return ret;
- }
-
- pcie->card_reset = of_get_gpio(np, 0);
- if (pcie->card_reset < 0)
- dev_info(&pdev->dev, "card reset gpio pin not exists\n");
-
- if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en))
- return -EINVAL;
-
- pcie->clk = of_clk_get_by_name(np, "pcie");
- if (IS_ERR(pcie->clk)) {
- return PTR_ERR(pcie->clk);
- }
-
- pcie->busclk = of_clk_get_by_name(np, "busclk");
- if (IS_ERR(pcie->busclk)) {
- clk_put(pcie->clk);
- return PTR_ERR(pcie->busclk);
- }
-
- return 0;
-}
-
-static void oxnas_pcie_init_hw(struct platform_device *pdev,
- struct oxnas_pcie *pcie)
-{
- u32 version_id;
- int ret;
-
- clk_prepare_enable(pcie->busclk);
-
- /* reset PCIe cards use hard-wired gpio pin */
- if (pcie->card_reset >= 0 &&
- !gpio_direction_output(pcie->card_reset, 0)) {
- wmb();
- mdelay(10);
- /* must tri-state the pin to pull it up */
- gpio_direction_input(pcie->card_reset);
- wmb();
- mdelay(100);
- }
-
- /* ToDo: use phy power-on port... */
- regmap_update_bits(pcie->sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET,
- BIT(pcie->hcsl_en), BIT(pcie->hcsl_en));
-
- /* core */
- ret = device_reset(&pdev->dev);
- if (ret) {
- dev_err(&pdev->dev, "core reset failed %d\n", ret);
- return;
- }
-
- /* Start PCIe core clocks */
- clk_prepare_enable(pcie->clk);
-
- version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID);
- dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id);
-
- if (version_id != VERSION_ID_MAGIC) {
- dev_info(&pdev->dev, "PCIe controller not found\n");
- pcie->haslink = 0;
- return;
- }
-
- /* allow entry to L23 state */
- regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
- PCIE_READY_ENTR_L23, PCIE_READY_ENTR_L23);
-
- /* Set PCIe core into RootCore mode */
- regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
- PCIE_DEVICE_TYPE_MASK, PCIE_DEVICE_TYPE_ROOT);
- wmb();
-
- /* Bring up the PCI core */
- regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
- PCIE_LTSSM, PCIE_LTSSM);
- wmb();
-}
-
-static int oxnas_pcie_probe(struct platform_device *pdev)
-{
- struct oxnas_pcie *pcie;
- struct device_node *np = pdev->dev.of_node;
- int ret;
-
- pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie),
- GFP_KERNEL);
- if (!pcie)
- return -ENOMEM;
-
- pcie->pdev = pdev;
- pcie->haslink = 1;
- spin_lock_init(&pcie->lock);
-
- pcie->sys_ctrl = syscon_regmap_lookup_by_compatible("oxsemi,ox820-sys-ctrl");
- if (IS_ERR(pcie->sys_ctrl))
- return PTR_ERR(pcie->sys_ctrl);
-
- ret = oxnas_pcie_init_res(pdev, pcie, np);
- if (ret)
- return ret;
- if (pcie->card_reset >= 0) {
- ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN,
- dev_name(&pdev->dev));
- if (ret) {
- dev_err(&pdev->dev, "cannot request gpio pin %d\n",
- pcie->card_reset);
- return ret;
- }
- }
-
- ret = oxnas_pcie_map_registers(pdev, np, pcie);
- if (ret) {
- dev_err(&pdev->dev, "cannot map registers\n");
- goto err_free_gpio;
- }
-
- ret = oxnas_pcie_shared_init(pdev, pcie);
- if (ret)
- goto err_free_gpio;
-
- /* if hw not found, haslink cleared */
- oxnas_pcie_init_hw(pdev, pcie);
-
- if (pcie->haslink && oxnas_pcie_link_up(pcie)) {
- pcie->haslink = 1;
- dev_info(&pdev->dev, "link up\n");
- } else {
- pcie->haslink = 0;
- dev_info(&pdev->dev, "link down\n");
- }
- /* should we register our controller even when pcie->haslink is 0 ? */
- /* register the controller with framework */
- oxnas_pcie_enable(&pdev->dev, pcie);
-
- return 0;
-
-err_free_gpio:
- if (pcie->card_reset)
- gpio_free(pcie->card_reset);
-
- return ret;
-}
-
-static const struct of_device_id oxnas_pcie_of_match_table[] = {
- { .compatible = "plxtech,nas782x-pcie", },
- {},
-};
-
-static struct platform_driver oxnas_pcie_driver = {
- .driver = {
- .name = "oxnas-pcie",
- .suppress_bind_attrs = true,
- .of_match_table = oxnas_pcie_of_match_table,
- },
- .probe = oxnas_pcie_probe,
-};
-
-builtin_platform_driver(oxnas_pcie_driver);
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 Daniel Golle <daniel@makrotopia.org>
- *
- */
-
-#include <dt-bindings/phy/phy.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/reset.h>
-
-#define ADDR_VAL(val) ((val) & 0xFFFF)
-#define DATA_VAL(val) ((val) & 0xFFFF)
-
-#define SYS_CTRL_HCSL_CTRL_REGOFFSET 0x114
-
-enum {
- HCSL_BIAS_ON = BIT(0),
- HCSL_PCIE_EN = BIT(1),
- HCSL_PCIEA_EN = BIT(2),
- HCSL_PCIEB_EN = BIT(3),
-};
-
-enum {
- /* pcie phy reg offset */
- PHY_ADDR = 0,
- PHY_DATA = 4,
- /* phy data reg bits */
- READ_EN = BIT(16),
- WRITE_EN = BIT(17),
- CAP_DATA = BIT(18),
-};
-
-struct oxnas_pcie_phy {
- struct device *dev;
- void __iomem *membase;
- const struct phy_ops *ops;
- struct regmap *sys_ctrl;
- struct reset_control *rstc;
-};
-
-static int oxnas_pcie_phy_init(struct phy *phy)
-{
- struct oxnas_pcie_phy *pciephy = phy_get_drvdata(phy);
- int ret;
-
- /* generate clocks from HCSL buffers, shared parts */
- regmap_write(pciephy->sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET, HCSL_BIAS_ON|HCSL_PCIE_EN);
-
- /* Ensure PCIe PHY is properly reset */
- ret = reset_control_reset(pciephy->rstc);
-
- if (ret) {
- dev_err(pciephy->dev, "phy reset failed %d\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-static int oxnas_pcie_phy_power_on(struct phy *phy)
-{
- struct oxnas_pcie_phy *pciephy = phy_get_drvdata(phy);
-
- /* Enable PCIe Pre-Emphasis: What these value means? */
- writel(ADDR_VAL(0x0014), pciephy->membase + PHY_ADDR);
- writel(DATA_VAL(0xce10) | CAP_DATA, pciephy->membase + PHY_DATA);
- writel(DATA_VAL(0xce10) | WRITE_EN, pciephy->membase + PHY_DATA);
-
- writel(ADDR_VAL(0x2004), pciephy->membase + PHY_ADDR);
- writel(DATA_VAL(0x82c7) | CAP_DATA, pciephy->membase + PHY_DATA);
- writel(DATA_VAL(0x82c7) | WRITE_EN, pciephy->membase + PHY_DATA);
-
- return 0;
-}
-
-static const struct phy_ops ops = {
- .init = oxnas_pcie_phy_init,
- .power_on = oxnas_pcie_phy_power_on,
- .owner = THIS_MODULE,
-};
-
-static int oxnas_pcie_phy_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device_node *np = pdev->dev.of_node;
- struct phy *generic_phy;
- struct phy_provider *phy_provider;
- struct oxnas_pcie_phy *pciephy;
- struct regmap *sys_ctrl;
- struct reset_control *rstc;
- void __iomem *membase;
-
- membase = of_iomap(np, 0);
- if (IS_ERR(membase))
- return PTR_ERR(membase);
-
- sys_ctrl = syscon_regmap_lookup_by_compatible("oxsemi,ox820-sys-ctrl");
- if (IS_ERR(sys_ctrl))
- return PTR_ERR(sys_ctrl);
-
- rstc = devm_reset_control_get_shared(dev, "phy");
- if (IS_ERR(rstc))
- return PTR_ERR(rstc);
-
- pciephy = devm_kzalloc(dev, sizeof(*pciephy), GFP_KERNEL);
- if (!pciephy)
- return -ENOMEM;
-
- pciephy->sys_ctrl = sys_ctrl;
- pciephy->rstc = rstc;
- pciephy->membase = membase;
- pciephy->dev = dev;
- pciephy->ops = &ops;
-
- generic_phy = devm_phy_create(dev, dev->of_node, pciephy->ops);
- if (IS_ERR(generic_phy)) {
- dev_err(dev, "failed to create PHY\n");
- return PTR_ERR(generic_phy);
- }
-
- phy_set_drvdata(generic_phy, pciephy);
- phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-
- return PTR_ERR_OR_ZERO(phy_provider);
-}
-
-static const struct of_device_id oxnas_pcie_phy_id_table[] = {
- { .compatible = "oxsemi,ox820-pcie-phy" },
- { },
-};
-
-static struct platform_driver oxnas_pcie_phy_driver = {
- .probe = oxnas_pcie_phy_probe,
- .driver = {
- .name = "ox820-pcie-phy",
- .of_match_table = oxnas_pcie_phy_id_table,
- },
-};
-
-builtin_platform_driver(oxnas_pcie_phy_driver);
--- /dev/null
+/*
+ * PCIe driver for PLX NAS782X SoCs
+ *
+ * Author: Ma Haijun <mahaijuns@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/mbus.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+
+#include "../pci.h"
+
+#define SYS_CTRL_HCSL_CTRL_REGOFFSET 0x114
+
+static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask)
+{
+ u32 val = readl_relaxed(p);
+
+ val &= ~mask;
+ writel_relaxed(val, p);
+}
+
+static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask)
+{
+ u32 val = readl_relaxed(p);
+
+ val |= mask;
+ writel_relaxed(val, p);
+}
+
+static inline void oxnas_register_value_mask(void __iomem *p,
+ unsigned mask, unsigned new_value)
+{
+ /* TODO sanity check mask & new_value = new_value */
+ u32 val = readl_relaxed(p);
+
+ val &= ~mask;
+ val |= new_value;
+ writel_relaxed(val, p);
+}
+
+#define VERSION_ID_MAGIC 0x082510b5
+#define LINK_UP_TIMEOUT_SECONDS 1
+#define NUM_CONTROLLERS 1
+
+enum {
+ PCIE_DEVICE_TYPE_MASK = 0x0F,
+ PCIE_DEVICE_TYPE_ENDPOINT = 0,
+ PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1,
+ PCIE_DEVICE_TYPE_ROOT = 4,
+
+ PCIE_LTSSM = BIT(4),
+ PCIE_READY_ENTR_L23 = BIT(9),
+ PCIE_LINK_UP = BIT(11),
+ PCIE_OBTRANS = BIT(12),
+};
+
+/* core config registers */
+enum {
+ PCI_CONFIG_VERSION_DEVICEID = 0,
+ PCI_CONFIG_COMMAND_STATUS = 4,
+};
+
+/* inbound config registers */
+enum {
+ IB_ADDR_XLATE_ENABLE = 0xFC,
+
+ /* bits */
+ ENABLE_IN_ADDR_TRANS = BIT(0),
+};
+
+/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */
+enum {
+ PCIE_POM0_MEM_ADDR = 0,
+ PCIE_POM1_MEM_ADDR = 4,
+ PCIE_IN0_MEM_ADDR = 8,
+ PCIE_IN1_MEM_ADDR = 12,
+ PCIE_IN_IO_ADDR = 16,
+ PCIE_IN_CFG0_ADDR = 20,
+ PCIE_IN_CFG1_ADDR = 24,
+ PCIE_IN_MSG_ADDR = 28,
+ PCIE_IN0_MEM_LIMIT = 32,
+ PCIE_IN1_MEM_LIMIT = 36,
+ PCIE_IN_IO_LIMIT = 40,
+ PCIE_IN_CFG0_LIMIT = 44,
+ PCIE_IN_CFG1_LIMIT = 48,
+ PCIE_IN_MSG_LIMIT = 52,
+ PCIE_AHB_SLAVE_CTRL = 56,
+
+ PCIE_SLAVE_BE_SHIFT = 22,
+};
+
+#define PCIE_SLAVE_BE(val) ((val) << PCIE_SLAVE_BE_SHIFT)
+#define PCIE_SLAVE_BE_MASK PCIE_SLAVE_BE(0xF)
+
+struct oxnas_pcie_shared {
+ /* seems all access are serialized, no lock required */
+ int refcount;
+};
+
+/* Structure representing one PCIe interfaces */
+struct oxnas_pcie {
+ void __iomem *cfgbase;
+ void __iomem *base;
+ void __iomem *inbound;
+ struct regmap *sys_ctrl;
+ unsigned int outbound_offset;
+ unsigned int pcie_ctrl_offset;
+ struct phy *phy;
+ int haslink;
+ struct platform_device *pdev;
+ struct resource io;
+ struct resource cfg;
+ struct resource pre_mem; /* prefetchable */
+ struct resource non_mem; /* non-prefetchable */
+ struct resource busn; /* max available bus numbers */
+ int card_reset; /* gpio pin, optional */
+ unsigned hcsl_en; /* hcsl pci enable bit */
+ struct clk *clk;
+ struct clk *busclk; /* for pcie bus, actually the PLLB */
+ void *private_data[1];
+ spinlock_t lock;
+};
+
+static struct oxnas_pcie_shared pcie_shared = {
+ .refcount = 0,
+};
+
+static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys)
+{
+ return sys->private_data;
+}
+
+
+static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes)
+{
+ regmap_update_bits(pcie->sys_ctrl, pcie->outbound_offset + PCIE_AHB_SLAVE_CTRL,
+ PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes));
+ wmb();
+}
+
+static int oxnas_pcie_link_up(struct oxnas_pcie *pcie)
+{
+ unsigned long end;
+ unsigned int val;
+
+ /* Poll for PCIE link up */
+ end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ);
+ while (!time_after(jiffies, end)) {
+ regmap_read(pcie->sys_ctrl, pcie->pcie_ctrl_offset, &val);
+ if (val & PCIE_LINK_UP)
+ return 1;
+ }
+ return 0;
+}
+
+static void oxnas_pcie_setup_hw(struct oxnas_pcie *pcie)
+{
+ /* We won't have any inbound address translation. This allows PCI
+ * devices to access anywhere in the AHB address map. Might be regarded
+ * as a bit dangerous, but let's get things working before we worry
+ * about that
+ */
+ oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE,
+ ENABLE_IN_ADDR_TRANS);
+ wmb();
+
+ /*
+ * Program outbound translation windows
+ *
+ * Outbound window is what is referred to as "PCI client" region in HRM
+ *
+ * Could use the larger alternative address space to get >>64M regions
+ * for graphics cards etc., but will not bother at this point.
+ *
+ * IP bug means that AMBA window size must be a power of 2
+ *
+ * Set mem0 window for first 16MB of outbound window non-prefetchable
+ * Set mem1 window for second 16MB of outbound window prefetchable
+ * Set io window for next 16MB of outbound window
+ * Set cfg0 for final 1MB of outbound window
+ *
+ * Ignore mem1, cfg1 and msg windows for now as no obvious use cases for
+ * 820 that would need them
+ *
+ * Probably ideally want no offset between mem0 window start as seen by
+ * ARM and as seen on PCI bus and get Linux to assign memory regions to
+ * PCI devices using the same "PCI client" region start address as seen
+ * by ARM
+ */
+
+ /* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_ADDR, pcie->non_mem.start);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_LIMIT, pcie->non_mem.end);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM0_MEM_ADDR, pcie->non_mem.start);
+
+ /* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_ADDR, pcie->pre_mem.start);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_LIMIT, pcie->pre_mem.end);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM1_MEM_ADDR, pcie->pre_mem.start);
+
+ /* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_ADDR, pcie->io.start);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_LIMIT, pcie->io.end);
+
+
+ /* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_ADDR, pcie->cfg.start);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_LIMIT, pcie->cfg.end);
+ wmb();
+
+ /* Enable outbound address translation */
+ regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset, PCIE_OBTRANS, PCIE_OBTRANS);
+ wmb();
+
+ /*
+ * Program PCIe command register for core to:
+ * enable memory space
+ * enable bus master
+ * enable io
+ */
+ writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS);
+ /* which is which */
+ wmb();
+}
+
+static unsigned oxnas_pcie_cfg_to_offset(
+ struct pci_sys_data *sys,
+ unsigned char bus_number,
+ unsigned int devfn,
+ int where)
+{
+ unsigned int function = PCI_FUNC(devfn);
+ unsigned int slot = PCI_SLOT(devfn);
+ unsigned char bus_number_offset;
+
+ bus_number_offset = bus_number - sys->busnr;
+
+ /*
+ * We'll assume for now that the offset, function, slot, bus encoding
+ * should map onto linear, contiguous addresses in PCIe config space,
+ * albeit that the majority will be unused as only slot 0 is valid for
+ * any PCIe bus and most devices have only function 0
+ *
+ * Could be that PCIe in fact works by not encoding the slot number into
+ * the config space address as it's known that only slot 0 is valid.
+ * We'll have to experiment if/when we get a PCIe switch connected to
+ * the PCIe host
+ */
+ return (bus_number_offset << 20) | (slot << 15) | (function << 12) |
+ (where & ~3);
+}
+
+/* PCI configuration space write function */
+static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ unsigned long flags;
+ struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
+ unsigned offset;
+ u32 value;
+ u32 lanes;
+
+ /* Only a single device per bus for PCIe point-to-point links */
+ if (PCI_SLOT(devfn) > 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (!pcie->haslink)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
+ where);
+
+ value = val << (8 * (where & 3));
+ lanes = (0xf >> (4-size)) << (where & 3);
+ /* it race with mem and io write, but the possibility is low, normally
+ * all config writes happens at driver initialize stage, wont interleave
+ * with others.
+ * and many pcie cards use dword (4bytes) access mem/io access only,
+ * so not bother to copy that ugly work-around now. */
+ spin_lock_irqsave(&pcie->lock, flags);
+ set_out_lanes(pcie, lanes);
+ writel_relaxed(value, pcie->cfgbase + offset);
+ set_out_lanes(pcie, 0xf);
+ spin_unlock_irqrestore(&pcie->lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCI configuration space read function */
+static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
+ unsigned offset;
+ u32 value;
+ u32 left_bytes, right_bytes;
+
+ /* Only a single device per bus for PCIe point-to-point links */
+ if (PCI_SLOT(devfn) > 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ if (!pcie->haslink) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
+ where);
+ value = readl_relaxed(pcie->cfgbase + offset);
+ left_bytes = where & 3;
+ right_bytes = 4 - left_bytes - size;
+ value <<= right_bytes * 8;
+ value >>= (left_bytes + right_bytes) * 8;
+ *val = value;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops oxnas_pcie_ops = {
+ .read = oxnas_pcie_rd_conf,
+ .write = oxnas_pcie_wr_conf,
+};
+
+static int oxnas_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+ struct oxnas_pcie *pcie = sys_to_pcie(sys);
+
+ pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset);
+ pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset);
+ pci_add_resource(&sys->resources, &pcie->busn);
+ if (sys->busnr == 0) { /* default one */
+ sys->busnr = pcie->busn.start;
+ }
+ /* do not use devm_ioremap_resource, it does not like cfg resource */
+ pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start,
+ resource_size(&pcie->cfg));
+ if (!pcie->cfgbase)
+ return -ENOMEM;
+
+ oxnas_pcie_setup_hw(pcie);
+
+ return 1;
+}
+
+static void oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie)
+{
+ struct hw_pci hw;
+ int i;
+
+ memset(&hw, 0, sizeof(hw));
+ for (i = 0; i < NUM_CONTROLLERS; i++)
+ pcie->private_data[i] = pcie;
+
+ hw.nr_controllers = NUM_CONTROLLERS;
+/* I think use stack pointer is a bad idea though it is valid in this case */
+ hw.private_data = pcie->private_data;
+ hw.setup = oxnas_pcie_setup;
+ hw.map_irq = of_irq_parse_and_map_pci;
+ hw.ops = &oxnas_pcie_ops;
+
+ /* pass dev to maintain of tree, interrupt mapping rely on this */
+ pci_common_init_dev(dev, &hw);
+}
+
+static int oxnas_pcie_shared_init(struct platform_device *pdev, struct oxnas_pcie *pcie)
+{
+ if (++pcie_shared.refcount == 1) {
+ phy_init(pcie->phy);
+ phy_power_on(pcie->phy);
+ return 0;
+ } else {
+ return 0;
+ }
+}
+
+#if 0
+/* maybe we will call it when enter low power state */
+static void oxnas_pcie_shared_deinit(struct platform_device *pdev)
+{
+ if (--pcie_shared.refcount == 0) {
+ /* no cleanup needed */;
+ }
+}
+#endif
+
+static int
+oxnas_pcie_map_registers(struct platform_device *pdev,
+ struct device_node *np,
+ struct oxnas_pcie *pcie)
+{
+ struct resource regs;
+ int ret = 0;
+ u32 outbound_ctrl_offset;
+ u32 pcie_ctrl_offset;
+
+ ret = of_address_to_resource(np, 0, ®s);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to parse base register space\n");
+ return -EINVAL;
+ }
+
+ pcie->base = devm_ioremap_resource(&pdev->dev, ®s);
+ if (!pcie->base) {
+ dev_err(&pdev->dev, "failed to map base register space\n");
+ return -ENOMEM;
+ }
+
+ ret = of_address_to_resource(np, 1, ®s);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to parse inbound register space\n");
+ return -EINVAL;
+ }
+
+ pcie->inbound = devm_ioremap_resource(&pdev->dev, ®s);
+ if (!pcie->inbound) {
+ dev_err(&pdev->dev, "failed to map inbound register space\n");
+ return -ENOMEM;
+ }
+
+ pcie->phy = devm_of_phy_get(&pdev->dev, np, NULL);
+ if (IS_ERR(pcie->phy)) {
+ if (PTR_ERR(pcie->phy) == -EPROBE_DEFER) {
+ dev_err(&pdev->dev, "failed to probe phy\n");
+ return PTR_ERR(pcie->phy);
+ }
+ dev_warn(&pdev->dev, "phy not attached\n");
+ pcie->phy = NULL;
+ }
+
+ if (of_property_read_u32(np, "plxtech,pcie-outbound-offset",
+ &outbound_ctrl_offset)) {
+ dev_err(&pdev->dev, "failed to parse outbound register offset\n");
+ return -EINVAL;
+ }
+ pcie->outbound_offset = outbound_ctrl_offset;
+
+ if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset",
+ &pcie_ctrl_offset)) {
+ dev_err(&pdev->dev, "failed to parse pcie-ctrl register offset\n");
+ return -EINVAL;
+ }
+ pcie->pcie_ctrl_offset = pcie_ctrl_offset;
+
+ return 0;
+}
+
+static int oxnas_pcie_init_res(struct platform_device *pdev,
+ struct oxnas_pcie *pcie,
+ struct device_node *np)
+{
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+ int ret;
+
+ if (of_pci_range_parser_init(&parser, np))
+ return -EINVAL;
+
+ /* Get the I/O and memory ranges from DT */
+ for_each_of_pci_range(&parser, &range) {
+
+ unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
+ if (restype == IORESOURCE_IO) {
+ of_pci_range_to_resource(&range, np, &pcie->io);
+ pcie->io.name = "I/O";
+ }
+ if (restype == IORESOURCE_MEM) {
+ if (range.flags & IORESOURCE_PREFETCH) {
+ of_pci_range_to_resource(&range, np, &pcie->pre_mem);
+ pcie->pre_mem.name = "PRE MEM";
+ } else {
+ of_pci_range_to_resource(&range, np, &pcie->non_mem);
+ pcie->non_mem.name = "NON MEM";
+ }
+
+ }
+ if (restype == 0)
+ of_pci_range_to_resource(&range, np, &pcie->cfg);
+ }
+
+ /* Get the bus range */
+ ret = of_pci_parse_bus_range(np, &pcie->busn);
+
+ if (ret) {
+ dev_err(&pdev->dev, "failed to parse bus-range property: %d\n",
+ ret);
+ return ret;
+ }
+
+ pcie->card_reset = of_get_gpio(np, 0);
+ if (pcie->card_reset < 0)
+ dev_info(&pdev->dev, "card reset gpio pin not exists\n");
+
+ if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en))
+ return -EINVAL;
+
+ pcie->clk = of_clk_get_by_name(np, "pcie");
+ if (IS_ERR(pcie->clk)) {
+ return PTR_ERR(pcie->clk);
+ }
+
+ pcie->busclk = of_clk_get_by_name(np, "busclk");
+ if (IS_ERR(pcie->busclk)) {
+ clk_put(pcie->clk);
+ return PTR_ERR(pcie->busclk);
+ }
+
+ return 0;
+}
+
+static void oxnas_pcie_init_hw(struct platform_device *pdev,
+ struct oxnas_pcie *pcie)
+{
+ u32 version_id;
+ int ret;
+
+ clk_prepare_enable(pcie->busclk);
+
+ /* reset PCIe cards use hard-wired gpio pin */
+ if (pcie->card_reset >= 0 &&
+ !gpio_direction_output(pcie->card_reset, 0)) {
+ wmb();
+ mdelay(10);
+ /* must tri-state the pin to pull it up */
+ gpio_direction_input(pcie->card_reset);
+ wmb();
+ mdelay(100);
+ }
+
+ /* ToDo: use phy power-on port... */
+ regmap_update_bits(pcie->sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET,
+ BIT(pcie->hcsl_en), BIT(pcie->hcsl_en));
+
+ /* core */
+ ret = device_reset(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "core reset failed %d\n", ret);
+ return;
+ }
+
+ /* Start PCIe core clocks */
+ clk_prepare_enable(pcie->clk);
+
+ version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID);
+ dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id);
+
+ if (version_id != VERSION_ID_MAGIC) {
+ dev_info(&pdev->dev, "PCIe controller not found\n");
+ pcie->haslink = 0;
+ return;
+ }
+
+ /* allow entry to L23 state */
+ regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
+ PCIE_READY_ENTR_L23, PCIE_READY_ENTR_L23);
+
+ /* Set PCIe core into RootCore mode */
+ regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
+ PCIE_DEVICE_TYPE_MASK, PCIE_DEVICE_TYPE_ROOT);
+ wmb();
+
+ /* Bring up the PCI core */
+ regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
+ PCIE_LTSSM, PCIE_LTSSM);
+ wmb();
+}
+
+static int oxnas_pcie_probe(struct platform_device *pdev)
+{
+ struct oxnas_pcie *pcie;
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie),
+ GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ pcie->pdev = pdev;
+ pcie->haslink = 1;
+ spin_lock_init(&pcie->lock);
+
+ pcie->sys_ctrl = syscon_regmap_lookup_by_compatible("oxsemi,ox820-sys-ctrl");
+ if (IS_ERR(pcie->sys_ctrl))
+ return PTR_ERR(pcie->sys_ctrl);
+
+ ret = oxnas_pcie_init_res(pdev, pcie, np);
+ if (ret)
+ return ret;
+ if (pcie->card_reset >= 0) {
+ ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN,
+ dev_name(&pdev->dev));
+ if (ret) {
+ dev_err(&pdev->dev, "cannot request gpio pin %d\n",
+ pcie->card_reset);
+ return ret;
+ }
+ }
+
+ ret = oxnas_pcie_map_registers(pdev, np, pcie);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot map registers\n");
+ goto err_free_gpio;
+ }
+
+ ret = oxnas_pcie_shared_init(pdev, pcie);
+ if (ret)
+ goto err_free_gpio;
+
+ /* if hw not found, haslink cleared */
+ oxnas_pcie_init_hw(pdev, pcie);
+
+ if (pcie->haslink && oxnas_pcie_link_up(pcie)) {
+ pcie->haslink = 1;
+ dev_info(&pdev->dev, "link up\n");
+ } else {
+ pcie->haslink = 0;
+ dev_info(&pdev->dev, "link down\n");
+ }
+ /* should we register our controller even when pcie->haslink is 0 ? */
+ /* register the controller with framework */
+ oxnas_pcie_enable(&pdev->dev, pcie);
+
+ return 0;
+
+err_free_gpio:
+ if (pcie->card_reset)
+ gpio_free(pcie->card_reset);
+
+ return ret;
+}
+
+static const struct of_device_id oxnas_pcie_of_match_table[] = {
+ { .compatible = "plxtech,nas782x-pcie", },
+ {},
+};
+
+static struct platform_driver oxnas_pcie_driver = {
+ .driver = {
+ .name = "oxnas-pcie",
+ .suppress_bind_attrs = true,
+ .of_match_table = oxnas_pcie_of_match_table,
+ },
+ .probe = oxnas_pcie_probe,
+};
+
+builtin_platform_driver(oxnas_pcie_driver);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Daniel Golle <daniel@makrotopia.org>
+ *
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define ADDR_VAL(val) ((val) & 0xFFFF)
+#define DATA_VAL(val) ((val) & 0xFFFF)
+
+#define SYS_CTRL_HCSL_CTRL_REGOFFSET 0x114
+
+enum {
+ HCSL_BIAS_ON = BIT(0),
+ HCSL_PCIE_EN = BIT(1),
+ HCSL_PCIEA_EN = BIT(2),
+ HCSL_PCIEB_EN = BIT(3),
+};
+
+enum {
+ /* pcie phy reg offset */
+ PHY_ADDR = 0,
+ PHY_DATA = 4,
+ /* phy data reg bits */
+ READ_EN = BIT(16),
+ WRITE_EN = BIT(17),
+ CAP_DATA = BIT(18),
+};
+
+struct oxnas_pcie_phy {
+ struct device *dev;
+ void __iomem *membase;
+ const struct phy_ops *ops;
+ struct regmap *sys_ctrl;
+ struct reset_control *rstc;
+};
+
+static int oxnas_pcie_phy_init(struct phy *phy)
+{
+ struct oxnas_pcie_phy *pciephy = phy_get_drvdata(phy);
+ int ret;
+
+ /* generate clocks from HCSL buffers, shared parts */
+ regmap_write(pciephy->sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET, HCSL_BIAS_ON|HCSL_PCIE_EN);
+
+ /* Ensure PCIe PHY is properly reset */
+ ret = reset_control_reset(pciephy->rstc);
+
+ if (ret) {
+ dev_err(pciephy->dev, "phy reset failed %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int oxnas_pcie_phy_power_on(struct phy *phy)
+{
+ struct oxnas_pcie_phy *pciephy = phy_get_drvdata(phy);
+
+ /* Enable PCIe Pre-Emphasis: What these value means? */
+ writel(ADDR_VAL(0x0014), pciephy->membase + PHY_ADDR);
+ writel(DATA_VAL(0xce10) | CAP_DATA, pciephy->membase + PHY_DATA);
+ writel(DATA_VAL(0xce10) | WRITE_EN, pciephy->membase + PHY_DATA);
+
+ writel(ADDR_VAL(0x2004), pciephy->membase + PHY_ADDR);
+ writel(DATA_VAL(0x82c7) | CAP_DATA, pciephy->membase + PHY_DATA);
+ writel(DATA_VAL(0x82c7) | WRITE_EN, pciephy->membase + PHY_DATA);
+
+ return 0;
+}
+
+static const struct phy_ops ops = {
+ .init = oxnas_pcie_phy_init,
+ .power_on = oxnas_pcie_phy_power_on,
+ .owner = THIS_MODULE,
+};
+
+static int oxnas_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct oxnas_pcie_phy *pciephy;
+ struct regmap *sys_ctrl;
+ struct reset_control *rstc;
+ void __iomem *membase;
+
+ membase = of_iomap(np, 0);
+ if (IS_ERR(membase))
+ return PTR_ERR(membase);
+
+ sys_ctrl = syscon_regmap_lookup_by_compatible("oxsemi,ox820-sys-ctrl");
+ if (IS_ERR(sys_ctrl))
+ return PTR_ERR(sys_ctrl);
+
+ rstc = devm_reset_control_get_shared(dev, "phy");
+ if (IS_ERR(rstc))
+ return PTR_ERR(rstc);
+
+ pciephy = devm_kzalloc(dev, sizeof(*pciephy), GFP_KERNEL);
+ if (!pciephy)
+ return -ENOMEM;
+
+ pciephy->sys_ctrl = sys_ctrl;
+ pciephy->rstc = rstc;
+ pciephy->membase = membase;
+ pciephy->dev = dev;
+ pciephy->ops = &ops;
+
+ generic_phy = devm_phy_create(dev, dev->of_node, pciephy->ops);
+ if (IS_ERR(generic_phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, pciephy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id oxnas_pcie_phy_id_table[] = {
+ { .compatible = "oxsemi,ox820-pcie-phy" },
+ { },
+};
+
+static struct platform_driver oxnas_pcie_phy_driver = {
+ .probe = oxnas_pcie_phy_probe,
+ .driver = {
+ .name = "ox820-pcie-phy",
+ .of_match_table = oxnas_pcie_phy_id_table,
+ },
+};
+
+builtin_platform_driver(oxnas_pcie_phy_driver);
+++ /dev/null
-From a9d2b105ccd23e07e3dd99d010a34bd5d1c95b42 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sat, 13 Jan 2018 18:35:59 +0100
-Subject: [PATCH 1/3] ARM: dts: rename oxnas dts files
-
-Other platforms' device-tree files start with a platform prefix, such as
-sun7i-a20-*.dts or at91-*.dts.
-This naming scheme turns out to be handy when using multi-platform build
-systems such as OpenWrt.
-Prepend oxnas files with their platform prefix to comply with the naming
-scheme already used for most other platforms.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
- arch/arm/boot/dts/Makefile | 4 ++--
- arch/arm/boot/dts/{wd-mbwe.dts => ox810se-wd-mbwe.dts} | 0
- ...-series-3.dts => ox820-cloudengines-pogoplug-series-3.dts} | 0
- 3 files changed, 2 insertions(+), 2 deletions(-)
- rename arch/arm/boot/dts/{wd-mbwe.dts => ox810se-wd-mbwe.dts} (100%)
- rename arch/arm/boot/dts/{cloudengines-pogoplug-series-3.dts => ox820-cloudengines-pogoplug-series-3.dts} (100%)
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -685,8 +685,8 @@ dtb-$(CONFIG_ARCH_ACTIONS) += \
- dtb-$(CONFIG_ARCH_PRIMA2) += \
- prima2-evb.dtb
- dtb-$(CONFIG_ARCH_OXNAS) += \
-- wd-mbwe.dtb \
-- cloudengines-pogoplug-series-3.dtb
-+ ox810se-wd-mbwe.dtb \
-+ ox820-cloudengines-pogoplug-series-3.dtb
- dtb-$(CONFIG_ARCH_QCOM) += \
- qcom-apq8060-dragonboard.dtb \
- qcom-apq8064-arrow-sd-600eval.dtb \
---- a/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
-+++ /dev/null
-@@ -1,94 +0,0 @@
--/*
-- * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
-- *
-- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
-- *
-- * Licensed under GPLv2 or later
-- */
--
--/dts-v1/;
--#include "ox820.dtsi"
--
--/ {
-- model = "Cloud Engines PogoPlug Series 3";
--
-- compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
--
-- chosen {
-- bootargs = "earlyprintk";
-- stdout-path = "serial0:115200n8";
-- };
--
-- memory {
-- /* 128Mbytes DDR */
-- reg = <0x60000000 0x8000000>;
-- };
--
-- aliases {
-- serial0 = &uart0;
-- gpio0 = &gpio0;
-- gpio1 = &gpio1;
-- };
--
-- leds {
-- compatible = "gpio-leds";
--
-- blue {
-- label = "pogoplug:blue";
-- gpios = <&gpio0 2 0>;
-- default-state = "keep";
-- };
--
-- orange {
-- label = "pogoplug:orange";
-- gpios = <&gpio1 16 1>;
-- default-state = "keep";
-- };
--
-- green {
-- label = "pogoplug:green";
-- gpios = <&gpio1 17 1>;
-- default-state = "keep";
-- };
-- };
--};
--
--&uart0 {
-- status = "okay";
--
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_uart0>;
--};
--
--&nandc {
-- status = "okay";
--
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_nand>;
--
-- nand@0 {
-- reg = <0>;
-- #address-cells = <1>;
-- #size-cells = <1>;
-- nand-ecc-mode = "soft";
-- nand-ecc-algo = "hamming";
--
-- partition@0 {
-- label = "boot";
-- reg = <0x00000000 0x00e00000>;
-- read-only;
-- };
--
-- partition@e00000 {
-- label = "ubi";
-- reg = <0x00e00000 0x07200000>;
-- };
-- };
--};
--
--ða {
-- status = "okay";
--
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_etha_mdio>;
--};
---- /dev/null
-+++ b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
-@@ -0,0 +1,112 @@
-+/*
-+ * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
-+ *
-+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
-+ *
-+ * Licensed under GPLv2 or later
-+ */
-+
-+/dts-v1/;
-+#include "ox810se.dtsi"
-+
-+/ {
-+ model = "Western Digital My Book World Edition";
-+
-+ compatible = "wd,mbwe", "oxsemi,ox810se";
-+
-+ chosen {
-+ bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
-+ };
-+
-+ memory {
-+ /* 128Mbytes DDR */
-+ reg = <0x48000000 0x8000000>;
-+ };
-+
-+ aliases {
-+ serial1 = &uart1;
-+ gpio0 = &gpio0;
-+ gpio1 = &gpio1;
-+ };
-+
-+ gpio-keys-polled {
-+ compatible = "gpio-keys-polled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ poll-interval = <100>;
-+
-+ power {
-+ label = "power";
-+ gpios = <&gpio0 0 1>;
-+ linux,code = <0x198>;
-+ };
-+
-+ recovery {
-+ label = "recovery";
-+ gpios = <&gpio0 4 1>;
-+ linux,code = <0xab>;
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ a0 {
-+ label = "activity0";
-+ gpios = <&gpio0 25 0>;
-+ default-state = "keep";
-+ };
-+
-+ a1 {
-+ label = "activity1";
-+ gpios = <&gpio0 26 0>;
-+ default-state = "keep";
-+ };
-+
-+ a2 {
-+ label = "activity2";
-+ gpios = <&gpio0 5 0>;
-+ default-state = "keep";
-+ };
-+
-+ a3 {
-+ label = "activity3";
-+ gpios = <&gpio0 6 0>;
-+ default-state = "keep";
-+ };
-+
-+ a4 {
-+ label = "activity4";
-+ gpios = <&gpio0 7 0>;
-+ default-state = "keep";
-+ };
-+
-+ a5 {
-+ label = "activity5";
-+ gpios = <&gpio1 2 0>;
-+ default-state = "keep";
-+ };
-+ };
-+
-+ i2c-gpio {
-+ compatible = "i2c-gpio";
-+ gpios = <&gpio0 3 0 /* sda */
-+ &gpio0 2 0 /* scl */
-+ >;
-+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rtc0: rtc@48 {
-+ compatible = "st,m41t00";
-+ reg = <0x68>;
-+ };
-+ };
-+};
-+
-+&uart1 {
-+ status = "okay";
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-@@ -0,0 +1,94 @@
-+/*
-+ * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
-+ *
-+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
-+ *
-+ * Licensed under GPLv2 or later
-+ */
-+
-+/dts-v1/;
-+#include "ox820.dtsi"
-+
-+/ {
-+ model = "Cloud Engines PogoPlug Series 3";
-+
-+ compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
-+
-+ chosen {
-+ bootargs = "earlyprintk";
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory {
-+ /* 128Mbytes DDR */
-+ reg = <0x60000000 0x8000000>;
-+ };
-+
-+ aliases {
-+ serial0 = &uart0;
-+ gpio0 = &gpio0;
-+ gpio1 = &gpio1;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ blue {
-+ label = "pogoplug:blue";
-+ gpios = <&gpio0 2 0>;
-+ default-state = "keep";
-+ };
-+
-+ orange {
-+ label = "pogoplug:orange";
-+ gpios = <&gpio1 16 1>;
-+ default-state = "keep";
-+ };
-+
-+ green {
-+ label = "pogoplug:green";
-+ gpios = <&gpio1 17 1>;
-+ default-state = "keep";
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart0>;
-+};
-+
-+&nandc {
-+ status = "okay";
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_nand>;
-+
-+ nand@0 {
-+ reg = <0>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ nand-ecc-mode = "soft";
-+ nand-ecc-algo = "hamming";
-+
-+ partition@0 {
-+ label = "boot";
-+ reg = <0x00000000 0x00e00000>;
-+ read-only;
-+ };
-+
-+ partition@e00000 {
-+ label = "ubi";
-+ reg = <0x00e00000 0x07200000>;
-+ };
-+ };
-+};
-+
-+ða {
-+ status = "okay";
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_etha_mdio>;
-+};
---- a/arch/arm/boot/dts/wd-mbwe.dts
-+++ /dev/null
-@@ -1,112 +0,0 @@
--/*
-- * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
-- *
-- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
-- *
-- * Licensed under GPLv2 or later
-- */
--
--/dts-v1/;
--#include "ox810se.dtsi"
--
--/ {
-- model = "Western Digital My Book World Edition";
--
-- compatible = "wd,mbwe", "oxsemi,ox810se";
--
-- chosen {
-- bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
-- };
--
-- memory {
-- /* 128Mbytes DDR */
-- reg = <0x48000000 0x8000000>;
-- };
--
-- aliases {
-- serial1 = &uart1;
-- gpio0 = &gpio0;
-- gpio1 = &gpio1;
-- };
--
-- gpio-keys-polled {
-- compatible = "gpio-keys-polled";
-- #address-cells = <1>;
-- #size-cells = <0>;
-- poll-interval = <100>;
--
-- power {
-- label = "power";
-- gpios = <&gpio0 0 1>;
-- linux,code = <0x198>;
-- };
--
-- recovery {
-- label = "recovery";
-- gpios = <&gpio0 4 1>;
-- linux,code = <0xab>;
-- };
-- };
--
-- leds {
-- compatible = "gpio-leds";
--
-- a0 {
-- label = "activity0";
-- gpios = <&gpio0 25 0>;
-- default-state = "keep";
-- };
--
-- a1 {
-- label = "activity1";
-- gpios = <&gpio0 26 0>;
-- default-state = "keep";
-- };
--
-- a2 {
-- label = "activity2";
-- gpios = <&gpio0 5 0>;
-- default-state = "keep";
-- };
--
-- a3 {
-- label = "activity3";
-- gpios = <&gpio0 6 0>;
-- default-state = "keep";
-- };
--
-- a4 {
-- label = "activity4";
-- gpios = <&gpio0 7 0>;
-- default-state = "keep";
-- };
--
-- a5 {
-- label = "activity5";
-- gpios = <&gpio1 2 0>;
-- default-state = "keep";
-- };
-- };
--
-- i2c-gpio {
-- compatible = "i2c-gpio";
-- gpios = <&gpio0 3 0 /* sda */
-- &gpio0 2 0 /* scl */
-- >;
-- i2c-gpio,delay-us = <2>; /* ~100 kHz */
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- rtc0: rtc@48 {
-- compatible = "st,m41t00";
-- reg = <0x68>;
-- };
-- };
--};
--
--&uart1 {
-- status = "okay";
--
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_uart1>;
--};
+++ /dev/null
-From a018141970d80677d2822fef9d391b85bf9cf99f Mon Sep 17 00:00:00 2001
-From: Joe Perches <joe@perches.com>
-Date: Tue, 6 Feb 2018 15:42:33 -0800
-Subject: [PATCH 2/3] MAINTAINERS: update "ARM/OXNAS platform support" patterns
-
-Commit 9e6c62b05c1b ("ARM: dts: rename oxnas dts files") renamed the
-files, update the patterns.
-
-[akpm@linux-foundation.org: crunch into a single globbed term, per Arnd]
-Link: http://lkml.kernel.org/r/b39d779e143b3c0a4e7dff827346e509447e3e8e.1517147485.git.joe@perches.com
-Signed-off-by: Joe Perches <joe@perches.com>
-Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
-Cc: Daniel Golle <daniel@makrotopia.org>
-Cc: Arnd Bergmann <arnd@arndb.de>
-Cc: Neil Armstrong <narmstrong@baylibre.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
- MAINTAINERS | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -1677,9 +1677,7 @@ L: linux-arm-kernel@lists.infradead.org
- L: linux-oxnas@lists.tuxfamily.org (moderated for non-subscribers)
- S: Maintained
- F: arch/arm/mach-oxnas/
--F: arch/arm/boot/dts/ox8*.dtsi
--F: arch/arm/boot/dts/wd-mbwe.dts
--F: arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
-+F: arch/arm/boot/dts/ox8*.dts*
- N: oxnas
-
- ARM/PALM TREO SUPPORT
+++ /dev/null
-From 22c1774af921a1cdb33bd37b44977b5b34ea58d0 Mon Sep 17 00:00:00 2001
-From: Neil Armstrong <narmstrong@baylibre.com>
-Date: Wed, 14 Mar 2018 09:35:44 +0100
-Subject: [PATCH 3/3] ARM: configs: add OXNAS v6 defconfig
-
-This patchs adds the minimal defconfig for the OXNAS ARMv6 SoCs
-including the OX820 SoC and needed minimal configurations.
-
-Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
- arch/arm/configs/oxnas_v6_defconfig | 93 +++++++++++++++++++++++++++++
- 1 file changed, 93 insertions(+)
- create mode 100644 arch/arm/configs/oxnas_v6_defconfig
-
---- /dev/null
-+++ b/arch/arm/configs/oxnas_v6_defconfig
-@@ -0,0 +1,93 @@
-+CONFIG_SYSVIPC=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_CGROUPS=y
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_EMBEDDED=y
-+CONFIG_PERF_EVENTS=y
-+CONFIG_STRICT_KERNEL_RWX=y
-+CONFIG_STRICT_MODULE_RWX=y
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_PARTITION_ADVANCED=y
-+CONFIG_CMDLINE_PARTITION=y
-+CONFIG_ARCH_MULTI_V6=y
-+CONFIG_ARCH_OXNAS=y
-+CONFIG_MACH_OX820=y
-+CONFIG_SMP=y
-+CONFIG_NR_CPUS=16
-+CONFIG_CMA=y
-+CONFIG_FORCE_MAX_ZONEORDER=12
-+CONFIG_SECCOMP=y
-+CONFIG_ARM_APPENDED_DTB=y
-+CONFIG_ARM_ATAG_DTB_COMPAT=y
-+CONFIG_KEXEC=y
-+CONFIG_EFI=y
-+CONFIG_CPU_IDLE=y
-+CONFIG_ARM_CPUIDLE=y
-+CONFIG_VFP=y
-+CONFIG_NET=y
-+CONFIG_PACKET=y
-+CONFIG_UNIX=y
-+CONFIG_INET=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+CONFIG_IP_PNP_BOOTP=y
-+CONFIG_IP_PNP_RARP=y
-+CONFIG_IPV6_ROUTER_PREF=y
-+CONFIG_IPV6_OPTIMISTIC_DAD=y
-+CONFIG_INET6_AH=m
-+CONFIG_INET6_ESP=m
-+CONFIG_INET6_IPCOMP=m
-+CONFIG_IPV6_MIP6=m
-+CONFIG_IPV6_TUNNEL=m
-+CONFIG_IPV6_MULTIPLE_TABLES=y
-+CONFIG_DEVTMPFS=y
-+CONFIG_DEVTMPFS_MOUNT=y
-+CONFIG_DMA_CMA=y
-+CONFIG_CMA_SIZE_MBYTES=64
-+CONFIG_SIMPLE_PM_BUS=y
-+CONFIG_MTD=y
-+CONFIG_MTD_CMDLINE_PARTS=y
-+CONFIG_MTD_BLOCK=y
-+CONFIG_MTD_NAND=y
-+CONFIG_MTD_NAND_OXNAS=y
-+CONFIG_MTD_UBI=y
-+CONFIG_BLK_DEV_LOOP=y
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_SIZE=65536
-+CONFIG_NETDEVICES=y
-+CONFIG_STMMAC_ETH=y
-+CONFIG_REALTEK_PHY=y
-+CONFIG_INPUT_EVDEV=y
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_SERIAL_OF_PLATFORM=y
-+CONFIG_GPIO_GENERIC_PLATFORM=y
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+CONFIG_LEDS_CLASS_FLASH=m
-+CONFIG_LEDS_GPIO=y
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_ONESHOT=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+CONFIG_LEDS_TRIGGER_CPU=y
-+CONFIG_LEDS_TRIGGER_GPIO=y
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-+CONFIG_ARM_TIMER_SP804=y
-+CONFIG_EXT4_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_TMPFS=y
-+CONFIG_TMPFS_POSIX_ACL=y
-+CONFIG_UBIFS_FS=y
-+CONFIG_PSTORE=y
-+CONFIG_PSTORE_CONSOLE=y
-+CONFIG_PSTORE_PMSG=y
-+CONFIG_PSTORE_RAM=y
-+CONFIG_NLS_CODEPAGE_437=y
-+CONFIG_NLS_ISO8859_1=y
-+CONFIG_NLS_UTF8=y
-+CONFIG_PRINTK_TIME=y
-+CONFIG_MAGIC_SYSRQ=y
+++ /dev/null
---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-@@ -15,7 +15,7 @@
- compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
-
- chosen {
-- bootargs = "earlyprintk";
-+ bootargs = "earlyprintk console=ttyS0,115200";
- stdout-path = "serial0:115200n8";
- };
-
+++ /dev/null
---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-@@ -74,11 +74,27 @@
- nand-ecc-algo = "hamming";
-
- partition@0 {
-- label = "boot";
-- reg = <0x00000000 0x00e00000>;
-+ label = "stage1";
-+ reg = <0x00000000 0x00040000>;
- read-only;
- };
-
-+ partition@40000 {
-+ label = "u-boot";
-+ reg = <0x00040000 0x00380000>;
-+ read-only;
-+ };
-+
-+ partition@3c0000 {
-+ label = "u-boot-env";
-+ reg = <0x003c0000 0x00080000>;
-+ };
-+
-+ partition@440000 {
-+ label = "kernel";
-+ reg = <0x00440000 0x009c0000>;
-+ };
-+
- partition@e00000 {
- label = "ubi";
- reg = <0x00e00000 0x07200000>;
+++ /dev/null
---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-@@ -28,24 +28,28 @@
- serial0 = &uart0;
- gpio0 = &gpio0;
- gpio1 = &gpio1;
-+ led-boot = &led_status;
-+ led-failsafe = &led_warn;
-+ led-running = &led_act;
-+ led-upgrade = &led_warn;
- };
-
- leds {
- compatible = "gpio-leds";
-
-- blue {
-+ led_status: blue {
- label = "pogoplug:blue";
- gpios = <&gpio0 2 0>;
- default-state = "keep";
- };
-
-- orange {
-+ led_warn: orange {
- label = "pogoplug:orange";
- gpios = <&gpio1 16 1>;
- default-state = "keep";
- };
-
-- green {
-+ led_act: green {
- label = "pogoplug:green";
- gpios = <&gpio1 17 1>;
- default-state = "keep";
+++ /dev/null
---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-@@ -12,7 +12,7 @@
- / {
- model = "Cloud Engines PogoPlug Series 3";
-
-- compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
-+ compatible = "cloudengines,pogoplug-series-3", "cloudengines,pogoplugv3", "oxsemi,ox820";
-
- chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+++ /dev/null
-From 552ed4955c1fee1109bf5ba137dc35a411a1448c Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 1 Jun 2018 02:41:15 +0200
-Subject: [PATCH] arm: ox820: remove left-overs
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/clk/clk-oxnas.c | 2 --
- include/dt-bindings/clock/oxsemi,ox820.h | 32 +++++++++++-------------
- 2 files changed, 14 insertions(+), 20 deletions(-)
-
---- a/drivers/clk/clk-oxnas.c
-+++ b/drivers/clk/clk-oxnas.c
-@@ -40,8 +40,6 @@ struct oxnas_stdclk_data {
- struct clk_hw_onecell_data *onecell_data;
- struct clk_oxnas_gate **gates;
- unsigned int ngates;
-- struct clk_oxnas_pll **plls;
-- unsigned int nplls;
- };
-
- /* Regmap offsets */
---- a/include/dt-bindings/clock/oxsemi,ox820.h
-+++ b/include/dt-bindings/clock/oxsemi,ox820.h
-@@ -17,24 +17,20 @@
- #ifndef DT_CLOCK_OXSEMI_OX820_H
- #define DT_CLOCK_OXSEMI_OX820_H
-
--/* PLLs */
--#define CLK_820_PLLA 0
--#define CLK_820_PLLB 1
--
- /* Gate Clocks */
--#define CLK_820_LEON 2
--#define CLK_820_DMA_SGDMA 3
--#define CLK_820_CIPHER 4
--#define CLK_820_SD 5
--#define CLK_820_SATA 6
--#define CLK_820_AUDIO 7
--#define CLK_820_USBMPH 8
--#define CLK_820_ETHA 9
--#define CLK_820_PCIEA 10
--#define CLK_820_NAND 11
--#define CLK_820_PCIEB 12
--#define CLK_820_ETHB 13
--#define CLK_820_REF600 14
--#define CLK_820_USBDEV 15
-+#define CLK_820_LEON 0
-+#define CLK_820_DMA_SGDMA 1
-+#define CLK_820_CIPHER 2
-+#define CLK_820_SD 3
-+#define CLK_820_SATA 4
-+#define CLK_820_AUDIO 5
-+#define CLK_820_USBMPH 6
-+#define CLK_820_ETHA 7
-+#define CLK_820_PCIEA 8
-+#define CLK_820_NAND 9
-+#define CLK_820_PCIEB 10
-+#define CLK_820_ETHB 11
-+#define CLK_820_REF600 12
-+#define CLK_820_USBDEV 13
-
- #endif /* DT_CLOCK_OXSEMI_OX820_H */
+++ /dev/null
---- a/drivers/clk/clk-oxnas.c
-+++ b/drivers/clk/clk-oxnas.c
-@@ -16,19 +16,42 @@
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-+#include <linux/clk.h>
-+#include <linux/clkdev.h>
- #include <linux/clk-provider.h>
- #include <linux/kernel.h>
- #include <linux/init.h>
-+#include <linux/delay.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/stringify.h>
- #include <linux/regmap.h>
- #include <linux/mfd/syscon.h>
-+#include <linux/reset.h>
-
- #include <dt-bindings/clock/oxsemi,ox810se.h>
- #include <dt-bindings/clock/oxsemi,ox820.h>
-
-+#define REF300_DIV_INT_SHIFT 8
-+#define REF300_DIV_FRAC_SHIFT 0
-+#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT)
-+#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT)
-+
-+#define PLLB_BYPASS 1
-+#define PLLB_ENSAT 3
-+#define PLLB_OUTDIV 4
-+#define PLLB_REFDIV 8
-+#define PLLB_DIV_INT_SHIFT 8
-+#define PLLB_DIV_FRAC_SHIFT 0
-+#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT)
-+#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT)
-+
-+#define PLLA_REFDIV_MASK 0x3F
-+#define PLLA_REFDIV_SHIFT 8
-+#define PLLA_OUTDIV_MASK 0x7
-+#define PLLA_OUTDIV_SHIFT 4
-+
- /* Standard regmap gate clocks */
- struct clk_oxnas_gate {
- struct clk_hw hw;
-@@ -47,6 +70,135 @@ struct oxnas_stdclk_data {
- #define CLK_SET_REGOFFSET 0x2c
- #define CLK_CLR_REGOFFSET 0x30
-
-+#define PLLA_CTRL0_REGOFFSET 0x1f0
-+#define PLLA_CTRL1_REGOFFSET 0x1f4
-+#define PLLB_CTRL0_REGOFFSET 0x1001f0
-+#define MHZ (1000 * 1000)
-+
-+struct clk_oxnas_pll {
-+ struct clk_hw hw;
-+ struct device_node *devnode;
-+ struct reset_control *rstc;
-+ struct regmap *syscon;
-+};
-+
-+#define to_clk_oxnas_pll(_hw) container_of(_hw, struct clk_oxnas_pll, hw)
-+
-+static unsigned long plla_clk_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct clk_oxnas_pll *plla = to_clk_oxnas_pll(hw);
-+ unsigned long fin = parent_rate;
-+ unsigned long refdiv, outdiv;
-+ unsigned int pll0, fbdiv;
-+
-+ BUG_ON(regmap_read(plla->syscon, PLLA_CTRL0_REGOFFSET, &pll0));
-+
-+ refdiv = (pll0 >> PLLA_REFDIV_SHIFT) & PLLA_REFDIV_MASK;
-+ refdiv += 1;
-+ outdiv = (pll0 >> PLLA_OUTDIV_SHIFT) & PLLA_OUTDIV_MASK;
-+ outdiv += 1;
-+
-+ BUG_ON(regmap_read(plla->syscon, PLLA_CTRL1_REGOFFSET, &fbdiv));
-+ /* seems we will not be here when pll is bypassed, so ignore this
-+ * case */
-+
-+ return fin / MHZ * fbdiv / (refdiv * outdiv) / 32768 * MHZ;
-+}
-+
-+static const char *pll_clk_parents[] = {
-+ "oscillator",
-+};
-+
-+static struct clk_ops plla_ops = {
-+ .recalc_rate = plla_clk_recalc_rate,
-+};
-+
-+static struct clk_init_data clk_plla_init = {
-+ .name = "plla",
-+ .ops = &plla_ops,
-+ .parent_names = pll_clk_parents,
-+ .num_parents = ARRAY_SIZE(pll_clk_parents),
-+};
-+
-+static int pllb_clk_is_prepared(struct clk_hw *hw)
-+{
-+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw);
-+
-+ return !!pllb->rstc;
-+}
-+
-+static int pllb_clk_prepare(struct clk_hw *hw)
-+{
-+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw);
-+
-+ pllb->rstc = of_reset_control_get(pllb->devnode, NULL);
-+
-+ return IS_ERR(pllb->rstc) ? PTR_ERR(pllb->rstc) : 0;
-+}
-+
-+static void pllb_clk_unprepare(struct clk_hw *hw)
-+{
-+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw);
-+
-+ BUG_ON(IS_ERR(pllb->rstc));
-+
-+ reset_control_put(pllb->rstc);
-+ pllb->rstc = NULL;
-+}
-+
-+static int pllb_clk_enable(struct clk_hw *hw)
-+{
-+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw);
-+
-+ BUG_ON(IS_ERR(pllb->rstc));
-+
-+ /* put PLL into bypass */
-+ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), BIT(PLLB_BYPASS));
-+ wmb();
-+ udelay(10);
-+ reset_control_assert(pllb->rstc);
-+ udelay(10);
-+ /* set PLL B control information */
-+ regmap_write_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, 0xffff,
-+ (1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV));
-+ reset_control_deassert(pllb->rstc);
-+ udelay(100);
-+ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), 0);
-+
-+ return 0;
-+}
-+
-+static void pllb_clk_disable(struct clk_hw *hw)
-+{
-+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw);
-+
-+ BUG_ON(IS_ERR(pllb->rstc));
-+
-+ /* put PLL into bypass */
-+ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), BIT(PLLB_BYPASS));
-+
-+ wmb();
-+ udelay(10);
-+
-+ reset_control_assert(pllb->rstc);
-+}
-+
-+static struct clk_ops pllb_ops = {
-+ .prepare = pllb_clk_prepare,
-+ .unprepare = pllb_clk_unprepare,
-+ .is_prepared = pllb_clk_is_prepared,
-+ .enable = pllb_clk_enable,
-+ .disable = pllb_clk_disable,
-+};
-+
-+static struct clk_init_data clk_pllb_init = {
-+ .name = "pllb",
-+ .ops = &pllb_ops,
-+ .parent_names = pll_clk_parents,
-+ .num_parents = ARRAY_SIZE(pll_clk_parents),
-+};
-+
- static inline struct clk_oxnas_gate *to_clk_oxnas_gate(struct clk_hw *hw)
- {
- return container_of(hw, struct clk_oxnas_gate, hw);
-@@ -260,3 +412,42 @@ static struct platform_driver oxnas_stdc
- },
- };
- builtin_platform_driver(oxnas_stdclk_driver);
-+
-+void __init oxnas_init_plla(struct device_node *np)
-+{
-+ struct clk *clk;
-+ struct clk_oxnas_pll *plla;
-+
-+ plla = kmalloc(sizeof(*plla), GFP_KERNEL);
-+ BUG_ON(!plla);
-+
-+ plla->syscon = syscon_node_to_regmap(of_get_parent(np));
-+ plla->hw.init = &clk_plla_init;
-+ plla->devnode = np;
-+ plla->rstc = NULL;
-+ clk = clk_register(NULL, &plla->hw);
-+ BUG_ON(IS_ERR(clk));
-+ /* mark it as enabled */
-+ clk_prepare_enable(clk);
-+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
-+}
-+CLK_OF_DECLARE(oxnas_plla, "plxtech,nas782x-plla", oxnas_init_plla);
-+
-+void __init oxnas_init_pllb(struct device_node *np)
-+{
-+ struct clk *clk;
-+ struct clk_oxnas_pll *pllb;
-+
-+ pllb = kmalloc(sizeof(*pllb), GFP_KERNEL);
-+ BUG_ON(!pllb);
-+
-+ pllb->syscon = syscon_node_to_regmap(of_get_parent(np));
-+ pllb->hw.init = &clk_pllb_init;
-+ pllb->devnode = np;
-+ pllb->rstc = NULL;
-+
-+ clk = clk_register(NULL, &pllb->hw);
-+ BUG_ON(IS_ERR(clk));
-+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
-+}
-+CLK_OF_DECLARE(oxnas_pllb, "plxtech,nas782x-pllb", oxnas_init_pllb);
---- a/arch/arm/boot/dts/ox820.dtsi
-+++ b/arch/arm/boot/dts/ox820.dtsi
-@@ -60,12 +60,6 @@
- clocks = <&osc>;
- };
-
-- plla: plla {
-- compatible = "fixed-clock";
-- #clock-cells = <0>;
-- clock-frequency = <850000000>;
-- };
--
- armclk: armclk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
-@@ -265,6 +259,19 @@
- compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk";
- #clock-cells = <1>;
- };
-+
-+ plla: plla {
-+ compatible = "plxtech,nas782x-plla";
-+ #clock-cells = <0>;
-+ clocks = <&osc>;
-+ };
-+
-+ pllb: pllb {
-+ compatible = "plxtech,nas782x-pllb";
-+ #clock-cells = <0>;
-+ clocks = <&osc>;
-+ resets = <&reset RESET_PLLB>;
-+ };
- };
- };
-
-@@ -286,6 +293,13 @@
- clocks = <&armclk>;
- };
-
-+ watchdog@620 {
-+ compatible = "mpcore_wdt";
-+ reg = <0x620 0x20>;
-+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>;
-+ clocks = <&armclk>;
-+ };
-+
- gic: gic@1000 {
- compatible = "arm,arm11mp-gic";
- interrupt-controller;
+++ /dev/null
---- a/drivers/power/reset/Kconfig
-+++ b/drivers/power/reset/Kconfig
-@@ -113,6 +113,12 @@ config POWER_RESET_MSM
- help
- Power off and restart support for Qualcomm boards.
-
-+config POWER_RESET_OXNAS
-+ bool "OXNAS SoC restart driver"
-+ depends on ARCH_OXNAS
-+ help
-+ Restart support for OXNAS boards.
-+
- config POWER_RESET_PIIX4_POWEROFF
- tristate "Intel PIIX4 power-off driver"
- depends on PCI
---- a/drivers/power/reset/Makefile
-+++ b/drivers/power/reset/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_POWER_RESET_GPIO_RESTART) +
- obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
- obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o
- obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
-+obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
- obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
- obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
- obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
+++ /dev/null
---- a/arch/arm/boot/dts/ox820.dtsi
-+++ b/arch/arm/boot/dts/ox820.dtsi
-@@ -246,6 +246,15 @@
- };
- };
-
-+ pcie_phy: pcie-phy@a00000 {
-+ compatible = "oxsemi,ox820-pcie-phy";
-+ reg = <0xa00000 0x10>;
-+ #phy-cells = <0>;
-+ resets = <&reset RESET_PCIEPHY>;
-+ reset-names = "phy";
-+ status = "disabled";
-+ };
-+
- sys: sys-ctrl@e00000 {
- compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd";
- reg = <0xe00000 0x200000>;
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -26,6 +26,13 @@ config PHY_LPC18XX_USB_OTG
- This driver is need for USB0 support on LPC18xx/43xx and takes
- care of enabling and clock setup.
-
-+config PHY_OXNAS
-+ tristate "Oxford Semi. OX820 PCI-E PHY support"
-+ depends on HAS_IOMEM && OF && (ARM || COMPILE_TEST)
-+ select GENERIC_PHY
-+ help
-+ This option enables support for OXNAS OX820 SoC PCIE PHY.
-+
- config PHY_PISTACHIO_USB
- tristate "IMG Pistachio USB2.0 PHY driver"
- depends on MACH_PISTACHIO
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -5,6 +5,7 @@
-
- obj-$(CONFIG_GENERIC_PHY) += phy-core.o
- obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
-+obj-$(CONFIG_PHY_OXNAS) += phy-oxnas-pcie.o
- obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
- obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
- obj-$(CONFIG_ARCH_SUNXI) += allwinner/
+++ /dev/null
---- a/drivers/pci/host/Kconfig
-+++ b/drivers/pci/host/Kconfig
-@@ -220,4 +220,9 @@ config VMD
- To compile this driver as a module, choose M here: the
- module will be called vmd.
-
-+config PCIE_OXNAS
-+ bool "PLX Oxnas PCIe controller"
-+ depends on ARCH_OXNAS
-+ select PCIEPORTBUS
-+
- endmenu
---- a/drivers/pci/host/Makefile
-+++ b/drivers/pci/host/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera
- obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
- obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
- obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
-+obj-$(CONFIG_PCIE_OXNAS) += pcie-oxnas.o
- obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
- obj-$(CONFIG_VMD) += vmd.o
-
---- a/arch/arm/boot/dts/ox820.dtsi
-+++ b/arch/arm/boot/dts/ox820.dtsi
-@@ -288,7 +288,7 @@
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
-- ranges = <0 0x47000000 0x1000000>;
-+ ranges = <0 0x47000000 0x2000>;
-
- scu: scu@0 {
- compatible = "arm,arm11mp-scu";
-@@ -317,5 +317,86 @@
- <0x100 0x500>;
- };
- };
-+
-+ pcie0: pcie-controller@47c00000 {
-+ compatible = "plxtech,nas782x-pcie";
-+ device_type = "pci";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ /* flag & space bus address host address size */
-+ ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000
-+ 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000
-+ 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000
-+ 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>;
-+
-+ bus-range = <0x00 0x7f>;
-+
-+ /* cfg inbound translator */
-+ reg = <0x47c00000 0x1000>, <0x47d00000 0x100>;
-+
-+ phys = <&pcie_phy>;
-+ phy-names = "pcie-phy";
-+
-+ #interrupt-cells = <1>;
-+ /* wild card mask, match all bus address & interrupt specifier */
-+ /* format: bus address mask, interrupt specifier mask */
-+ /* each bit 1 means need match, 0 means ignored when match */
-+ interrupt-map-mask = <0 0 0 0>;
-+ /* format: a list of: bus address, interrupt specifier,
-+ * parent interrupt controller & specifier */
-+ interrupt-map = <0 0 0 0 &gic 0 19 0x304>;
-+ gpios = <&gpio1 12 0>;
-+ clocks = <&stdclk CLK_820_PCIEA>, <&pllb>;
-+ clock-names = "pcie", "busclk";
-+ resets = <&reset RESET_PCIEA>;
-+ reset-names = "pcie";
-+
-+ plxtech,pcie-hcsl-bit = <2>;
-+ plxtech,pcie-ctrl-offset = <0x120>;
-+ plxtech,pcie-outbound-offset = <0x138>;
-+ status = "disabled";
-+ };
-+
-+ pcie1: pcie-controller@47e00000 {
-+ compatible = "plxtech,nas782x-pcie";
-+ device_type = "pci";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ /* flag & space bus address host address size */
-+ ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000
-+ 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000
-+ 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000
-+ 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>;
-+
-+ bus-range = <0x80 0xff>;
-+
-+ /* cfg inbound translator */
-+ reg = <0x47e00000 0x1000>, <0x47f00000 0x100>;
-+
-+ phys = <&pcie_phy>;
-+ phy-names = "pcie-phy";
-+
-+ #interrupt-cells = <1>;
-+ /* wild card mask, match all bus address & interrupt specifier */
-+ /* format: bus address mask, interrupt specifier mask */
-+ /* each bit 1 means need match, 0 means ignored when match */
-+ interrupt-map-mask = <0 0 0 0>;
-+ /* format: a list of: bus address, interrupt specifier,
-+ * parent interrupt controller & specifier */
-+ interrupt-map = <0 0 0 0 &gic 0 20 0x304>;
-+
-+ /* gpios = <&gpio1 12 0>; */
-+ clocks = <&stdclk CLK_820_PCIEB>, <&pllb>;
-+ clock-names = "pcie", "busclk";
-+ resets = <&reset RESET_PCIEB>;
-+ reset-names = "pcie";
-+
-+ plxtech,pcie-hcsl-bit = <3>;
-+ plxtech,pcie-ctrl-offset = <0x124>;
-+ plxtech,pcie-outbound-offset = <0x174>;
-+ status = "disabled";
-+ };
- };
- };
+++ /dev/null
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -493,6 +493,13 @@ config SATA_VITESSE
-
- If unsure, say N.
-
-+config SATA_OXNAS
-+ tristate "PLXTECH NAS782X SATA support"
-+ help
-+ This option enables support for Nas782x Serial ATA controller.
-+
-+ If unsure, say N.
-+
- comment "PATA SFF controllers with BMDMA"
-
- config PATA_ALI
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_SATA_SVW) += sata_svw.o
- obj-$(CONFIG_SATA_ULI) += sata_uli.o
- obj-$(CONFIG_SATA_VIA) += sata_via.o
- obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o
-+obj-$(CONFIG_SATA_OXNAS) += sata_oxnas.o
-
- # SFF PATA w/ BMDMA
- obj-$(CONFIG_PATA_ALI) += pata_ali.o
---- a/arch/arm/boot/dts/ox820.dtsi
-+++ b/arch/arm/boot/dts/ox820.dtsi
-@@ -398,5 +398,20 @@
- plxtech,pcie-outbound-offset = <0x174>;
- status = "disabled";
- };
-+
-+ sata: sata@45900000 {
-+ compatible = "plxtech,nas782x-sata";
-+ /* ports dmactl sgdma */
-+ reg = <0x45900000 0x20000>, <0x459A0000 0x40>, <0x459B0000 0x20>,
-+ /* core phy descriptors (optional) */
-+ <0x459E0000 0x2000>, <0x44900000 0x0C>, <0x50000000 0x1000>;
-+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&stdclk CLK_820_SATA>;
-+ resets = <&reset RESET_SATA>, <&reset RESET_SATA_LINK>, <&reset RESET_SATA_PHY>;
-+ reset-names = "sata", "link", "phy";
-+ nr-ports = <1>;
-+ status = "disabled";
-+ };
-+
- };
- };
+++ /dev/null
---- a/arch/arm/mach-oxnas/Kconfig
-+++ b/arch/arm/mach-oxnas/Kconfig
-@@ -1,6 +1,7 @@
- menuconfig ARCH_OXNAS
- bool "Oxford Semiconductor OXNAS Family SoCs"
- select ARCH_HAS_RESET_CONTROLLER
-+ select ARCH_WANT_LIBATA_LEDS
- select COMMON_CLK_OXNAS
- select GPIOLIB
- select MFD_SYSCON
+++ /dev/null
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -334,6 +334,13 @@ config USB_OCTEON_EHCI
- USB 2.0 device support. All CN6XXX based chips with USB are
- supported.
-
-+config USB_EHCI_OXNAS
-+ tristate "OXNAS EHCI Module"
-+ depends on USB_EHCI_HCD && ARCH_OXNAS
-+ select USB_EHCI_ROOT_HUB_TT
-+ ---help---
-+ Enable support for the OX820 SOC's on-chip EHCI controller.
-+
- endif # USB_EHCI_HCD
-
- config USB_OXU210HP_HCD
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-
- obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
- obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
- obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o
-+obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o
-
- obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
---- a/arch/arm/boot/dts/ox820.dtsi
-+++ b/arch/arm/boot/dts/ox820.dtsi
-@@ -105,6 +105,31 @@
- status = "disabled";
- };
-
-+ ehci: ehci@40200100 {
-+ compatible = "plxtech,nas782x-ehci";
-+ reg = <0x40200100 0xf00>;
-+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&stdclk CLK_820_USBMPH>, <&pllb>, <&stdclk CLK_820_REF600>;
-+ clock-names = "usb", "refsrc", "phyref";
-+ resets = <&reset RESET_USBHS>, <&reset RESET_USBPHYA>, <&reset RESET_USBPHYB>;
-+ reset-names = "host", "phya", "phyb";
-+ oxsemi,sys-ctrl = <&sys>;
-+ /* Otherwise ref300 is used, which is derived from sata phy
-+ * in that case, usb depends on sata initialization */
-+ /* FIXME: how to make this dependency explicit ? */
-+ oxsemi,ehci_use_pllb;
-+ status = "disabled";
-+
-+ ehci_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+ ehci_port2: port@2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
-+ };
-+
- apb-bridge@44000000 {
- #address-cells = <1>;
- #size-cells = <1>;
---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-@@ -106,6 +106,10 @@
- };
- };
-
-+&ehci {
-+ status = "okay";
-+};
-+
- ða {
- status = "okay";
-
+++ /dev/null
-From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
-From: Adrian Panella <ianchi74@outlook.com>
-Date: Thu, 9 Mar 2017 09:37:17 +0100
-Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
----
- arch/arm/Kconfig | 11 +++++
- arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++-
- init/main.c | 16 ++++++++
- 3 files changed, 98 insertions(+), 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1934,6 +1934,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
-
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ bool "Append rootblock parsing bootloader's kernel arguments"
-+ help
-+ The command-line arguments provided by the boot loader will be
-+ appended to a new device tree property: bootloader-args.
-+ If there is a property "append-rootblock" in DT under /chosen
-+ and a root= option in bootloaders command line it will be parsed
-+ and added to DT bootargs with the form: <append-rootblock>XX.
-+ Only command line ATAG will be processed, the rest of the ATAGs
-+ sent by bootloader will be ignored.
-+
- endchoice
-
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -4,6 +4,8 @@
-
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -67,6 +69,59 @@ static uint32_t get_cell_size(const void
- return cell_size;
- }
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+ char *ptr, *end;
-+ char *root="root=";
-+ int i, l;
-+ const char *rootblock;
-+
-+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
-+ ptr = str - 1;
-+
-+ do {
-+ //first find an 'r' at the begining or after a space
-+ do {
-+ ptr++;
-+ ptr = strchr(ptr, 'r');
-+ if(!ptr) return dest;
-+
-+ } while (ptr != str && *(ptr-1) != ' ');
-+
-+ //then check for the rest
-+ for(i = 1; i <= 4; i++)
-+ if(*(ptr+i) != *(root+i)) break;
-+
-+ } while (i != 5);
-+
-+ end = strchr(ptr, ' ');
-+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
-+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+ ptr = end + 1;
-+
-+ /* if append-rootblock property is set use it to append to command line */
-+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+ if(rootblock != NULL) {
-+ if(*dest != ' ') {
-+ *dest = ' ';
-+ dest++;
-+ len++;
-+ }
-+ if (len + l + i <= COMMAND_LINE_SIZE) {
-+ memcpy(dest, rootblock, l);
-+ dest += l - 1;
-+ memcpy(dest, ptr, i);
-+ dest += i;
-+ }
-+ }
-+ return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- char cmdline[COMMAND_LINE_SIZE];
-@@ -86,12 +141,21 @@ static void merge_fdt_bootargs(void *fdt
-
- /* and append the ATAG_CMDLINE */
- if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //save original bootloader args
-+ //and append ubi.mtd with root partition number to current cmdline
-+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- len = strlen(fdt_cmdline);
- if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- *ptr++ = ' ';
- memcpy(ptr, fdt_cmdline, len);
- ptr += len;
- }
-+#endif
- }
- *ptr = '\0';
-
-@@ -148,7 +212,9 @@ int atags_to_fdt(void *atag_list, void *
- else
- setprop_string(fdt, "/chosen", "bootargs",
- atag->u.cmdline.cmdline);
-- } else if (atag->hdr.tag == ATAG_MEM) {
-+ }
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ else if (atag->hdr.tag == ATAG_MEM) {
- if (memcount >= sizeof(mem_reg_property)/4)
- continue;
- if (!atag->u.mem.size)
-@@ -187,6 +253,10 @@ int atags_to_fdt(void *atag_list, void *
- setprop(fdt, "/memory", "reg", mem_reg_property,
- 4 * memcount * memsize);
- }
-+#else
-+
-+ }
-+#endif
-
- return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -95,6 +95,10 @@
- #include <asm/sections.h>
- #include <asm/cacheflush.h>
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
-
- extern void init_IRQ(void);
-@@ -573,6 +577,18 @@ asmlinkage __visible void __init start_k
- page_alloc_init();
-
- pr_notice("Kernel command line: %s\n", boot_command_line);
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //Show bootloader's original command line for reference
-+ if(of_chosen) {
-+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+ if(prop)
-+ pr_notice("Bootloader command line (ignored): %s\n", prop);
-+ else
-+ pr_notice("Bootloader command line not present\n");
-+ }
-+#endif
-+
- /* parameters may set static keys */
- jump_label_init();
- parse_early_param();
+++ /dev/null
---- a/drivers/ata/libata-core.c
-+++ b/drivers/ata/libata-core.c
-@@ -1599,6 +1599,14 @@ unsigned ata_exec_internal_sg(struct ata
- return AC_ERR_SYSTEM;
- }
-
-+ if (ap->ops->acquire_hw && !ap->ops->acquire_hw(ap, 0, 0)) {
-+ spin_unlock_irqrestore(ap->lock, flags);
-+ if (!ap->ops->acquire_hw(ap, 1, (2*HZ))) {
-+ return AC_ERR_TIMEOUT;
-+ }
-+ spin_lock_irqsave(ap->lock, flags);
-+ }
-+
- /* initialize internal qc */
-
- /* XXX: Tag 0 is used for drivers with legacy EH as some
-@@ -5131,6 +5139,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
- if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
- return NULL;
-
-+ if (ap->ops->qc_new && ap->ops->qc_new(ap))
-+ return NULL;
-+
- /* libsas case */
- if (ap->flags & ATA_FLAG_SAS_HOST) {
- tag = ata_sas_allocate_tag(ap);
-@@ -5176,6 +5187,8 @@ void ata_qc_free(struct ata_queued_cmd *
- qc->tag = ATA_TAG_POISON;
- if (ap->flags & ATA_FLAG_SAS_HOST)
- ata_sas_free_tag(tag, ap);
-+ if (ap->ops->qc_free)
-+ ap->ops->qc_free(qc);
- }
- }
-
---- a/include/linux/libata.h
-+++ b/include/linux/libata.h
-@@ -919,6 +919,8 @@ struct ata_port_operations {
- void (*qc_prep)(struct ata_queued_cmd *qc);
- unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
- bool (*qc_fill_rtf)(struct ata_queued_cmd *qc);
-+ int (*qc_new)(struct ata_port *ap);
-+ void (*qc_free)(struct ata_queued_cmd *qc);
-
- /*
- * Configuration and exception handling
-@@ -1009,6 +1011,9 @@ struct ata_port_operations {
- void (*phy_reset)(struct ata_port *ap);
- void (*eng_timeout)(struct ata_port *ap);
-
-+ int (*acquire_hw)(struct ata_port *ap, int may_sleep,
-+ int timeout_jiffies);
-+
- /*
- * ->inherits must be the last field and all the preceding
- * fields must be pointers.
projects / oweals / openwrt.git / commitdiff