Refreshed all patches.
Remove upstreamed:
- 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch
- 184-USB-serial-option-add-Wistron-Neweb-D19Q1.patch
Fixes:
- CVE-2020-8647
- CVE-2020-8648 (potentially)
- CVE-2020-8649
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
endif
LINUX_VERSION-4.14 = .176
-LINUX_VERSION-4.19 = .108
+LINUX_VERSION-4.19 = .115
LINUX_VERSION-5.4 = .32
LINUX_KERNEL_HASH-4.14.176 = bcae0956baaeb55dab5bad0401873fbc5baaa7fbe957ea6d27a5ab241cec5ca2
-LINUX_KERNEL_HASH-4.19.108 = 09aeeca5b08efea2f54b977b2999afb60d42f93b9f65b2b0111969f183f750a3
+LINUX_KERNEL_HASH-4.19.115 = 11b2d97c8ea5ceb40c5e1d0bb87ad5b2b8c84560181bc60c0d28ec3a3e3801c2
LINUX_KERNEL_HASH-5.4.32 = 192d99fab7a47a537493b6d7eddb52892b98f8ada655c0bbb419b360a995f2b3
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
#include "xhci.h"
#include "xhci-trace.h"
-@@ -264,6 +266,458 @@ static void xhci_pme_acpi_rtd3_enable(st
+@@ -265,6 +267,458 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
#endif /* CONFIG_ACPI */
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
-@@ -305,6 +759,22 @@ static int xhci_pci_probe(struct pci_dev
+@@ -306,6 +760,22 @@ static int xhci_pci_probe(struct pci_dev
struct hc_driver *driver;
struct usb_hcd *hcd;
driver = (struct hc_driver *)id->driver_data;
/* Prevent runtime suspending between USB-2 and USB-3 initialization */
-@@ -363,6 +833,16 @@ static void xhci_pci_remove(struct pci_d
+@@ -364,6 +834,16 @@ static void xhci_pci_remove(struct pci_d
{
struct xhci_hcd *xhci;
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
-@@ -217,6 +217,7 @@ static void xhci_pci_quirks(struct devic
+@@ -218,6 +218,7 @@ static void xhci_pci_quirks(struct devic
pdev->device == 0x0015) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci->quirks |= XHCI_ZERO_64B_REGS;
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
-@@ -286,6 +286,10 @@ static void ar933x_uart_set_termios(stru
+@@ -290,6 +290,10 @@ static void ar933x_uart_set_termios(stru
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
- AR933X_UART_CS_HOST_INT_EN);
+ AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
+ /* enable RX and TX ready overide */
+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
/* reenable the UART */
ar933x_uart_rmw(up, AR933X_UART_CS_REG,
AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
-@@ -418,6 +422,10 @@ static int ar933x_uart_startup(struct ua
- ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
- AR933X_UART_CS_HOST_INT_EN);
+@@ -424,6 +428,10 @@ static int ar933x_uart_startup(struct ua
-+ /* enable RX and TX ready overide */
-+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+ /* enable RX and TX ready overide */
+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
+
++ /* enable RX and TX ready overide */
++ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
+
/* Enable RX interrupts */
- up->ier = AR933X_UART_INT_RX_VALID;
- ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
}
static void ar933x_uart_break_ctl(struct uart_port *port, int break_state)
-@@ -336,11 +393,20 @@ static void ar933x_uart_rx_chars(struct
+@@ -340,11 +397,20 @@ static void ar933x_uart_rx_chars(struct
static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
{
struct circ_buf *xmit = &up->port.state->xmit;
count = up->port.fifosize;
do {
unsigned int rdata;
-@@ -368,8 +434,14 @@ static void ar933x_uart_tx_chars(struct
+@@ -372,8 +438,14 @@ static void ar933x_uart_tx_chars(struct
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
}
static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id)
-@@ -427,8 +499,7 @@ static int ar933x_uart_startup(struct ua
+@@ -435,8 +507,7 @@ static int ar933x_uart_startup(struct ua
AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
/* Enable RX interrupts */
spin_unlock_irqrestore(&up->port.lock, flags);
-@@ -511,6 +582,21 @@ static const struct uart_ops ar933x_uart
+@@ -519,6 +590,21 @@ static const struct uart_ops ar933x_uart
.verify_port = ar933x_uart_verify_port,
};
#ifdef CONFIG_SERIAL_AR933X_CONSOLE
static struct ar933x_uart_port *
ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
-@@ -680,6 +766,8 @@ static int ar933x_uart_probe(struct plat
+@@ -688,6 +774,8 @@ static int ar933x_uart_probe(struct plat
goto err_disable_clk;
}
port->mapbase = mem_res->start;
port->line = id;
port->irq = irq_res->start;
-@@ -690,6 +778,7 @@ static int ar933x_uart_probe(struct plat
+@@ -698,6 +786,7 @@ static int ar933x_uart_probe(struct plat
port->regshift = 2;
port->fifosize = AR933X_UART_FIFO_SIZE;
port->ops = &ar933x_uart_ops;
baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
-@@ -697,6 +786,18 @@ static int ar933x_uart_probe(struct plat
+@@ -705,6 +794,18 @@ static int ar933x_uart_probe(struct plat
baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
drivers/spi/spi-ath79.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
-Index: linux-4.19.106/drivers/spi/spi-ath79.c
-===================================================================
---- linux-4.19.106.orig/drivers/spi/spi-ath79.c
-+++ linux-4.19.106/drivers/spi/spi-ath79.c
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/ipv6.h>
#include <linux/icmpv6.h>
-@@ -837,10 +838,10 @@ static void tcp_v6_send_response(const s
+@@ -836,10 +837,10 @@ static void tcp_v6_send_response(const s
topt = (__be32 *)(t1 + 1);
if (tsecr) {
}
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
-@@ -5228,7 +5228,7 @@ static void port_event(struct usb_hub *h
+@@ -5232,7 +5232,7 @@ static void port_event(struct usb_hub *h
u16 status = 0, unused;
port_dev->over_current_count++;
goto out;
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
-@@ -2230,7 +2230,8 @@ EXPORT_SYMBOL(mmc_erase);
+@@ -2233,7 +2233,8 @@ EXPORT_SYMBOL(mmc_erase);
int mmc_can_erase(struct mmc_card *card)
{
if ((card->host->caps & MMC_CAP_ERASE) &&
ENDPROC(arm_copy_from_user)
+ENDPROC(__copy_from_user_std)
- .pushsection .fixup,"ax"
+ .pushsection .text.fixup,"ax"
.align 0
--- /dev/null
+++ b/arch/arm/lib/exports_rpi.c
+whwave,sd3078 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
-@@ -625,6 +625,15 @@ config RTC_DRV_EM3027
+@@ -626,6 +626,15 @@ config RTC_DRV_EM3027
This driver can also be built as a module. If so, the module
will be called rtc-em3027.
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
-@@ -224,6 +224,10 @@ static void xhci_pci_quirks(struct devic
+@@ -225,6 +225,10 @@ static void xhci_pci_quirks(struct devic
pdev->device == 0x3432)
xhci->quirks |= XHCI_BROKEN_STREAMS;
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
-@@ -225,8 +225,10 @@ static void xhci_pci_quirks(struct devic
+@@ -226,8 +226,10 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_BROKEN_STREAMS;
if (pdev->vendor == PCI_VENDOR_ID_VIA &&
#define USB_VENDOR_ID_BELKIN 0x050d
#define USB_DEVICE_ID_FLIP_KVM 0x3201
-@@ -1196,6 +1199,9 @@
+@@ -1197,6 +1200,9 @@
#define USB_VENDOR_ID_XAT 0x2505
#define USB_DEVICE_ID_XAT_CSR 0x0220
pinctrl-0 = <&uart0_gpio14>;
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
-@@ -129,6 +129,13 @@
+@@ -130,6 +130,13 @@
};
};
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
-@@ -119,6 +119,7 @@
- #address-cells = <1>;
+@@ -120,6 +120,7 @@
#size-cells = <0>;
+ pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+ bus-width = <4>;
mmc-pwrseq = <&wifi_pwrseq>;
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1305,6 +1305,18 @@ static const struct flash_info *spi_nor_
+@@ -1307,6 +1307,18 @@ static const struct flash_info *spi_nor_
}
dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
id[0], id[1], id[2]);
+++ /dev/null
-From 82afdcd4ec3c8ca6551cbf7c43c09e2fd240487a Mon Sep 17 00:00:00 2001
-From: Hangbin Liu <liuhangbin@gmail.com>
-Date: Tue, 10 Mar 2020 15:27:37 +0800
-Subject: [PATCH] ipv6/addrconf: call ipv6_mc_up() for non-Ethernet interface
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Rafał found an issue that for non-Ethernet interface, if we down and up
-frequently, the memory will be consumed slowly.
-
-The reason is we add allnodes/allrouters addressed in multicast list in
-ipv6_add_dev(). When link down, we call ipv6_mc_down(), store all multicast
-addresses via mld_add_delrec(). But when link up, we don't call ipv6_mc_up()
-for non-Ethernet interface to remove the addresses. This makes idev->mc_tomb
-getting bigger and bigger. The call stack looks like:
-
-addrconf_notify(NETDEV_REGISTER)
- ipv6_add_dev
- ipv6_dev_mc_inc(ff01::1)
- ipv6_dev_mc_inc(ff02::1)
- ipv6_dev_mc_inc(ff02::2)
-
-addrconf_notify(NETDEV_UP)
- addrconf_dev_config
- /* Alas, we support only Ethernet autoconfiguration. */
- return;
-
-addrconf_notify(NETDEV_DOWN)
- addrconf_ifdown
- ipv6_mc_down
- igmp6_group_dropped(ff02::2)
- mld_add_delrec(ff02::2)
- igmp6_group_dropped(ff02::1)
- igmp6_group_dropped(ff01::1)
-
-After investigating, I can't found a rule to disable multicast on
-non-Ethernet interface. In RFC2460, the link could be Ethernet, PPP, ATM,
-tunnels, etc. In IPv4, it doesn't check the dev type when calls ip_mc_up()
-in inetdev_event(). Even for IPv6, we don't check the dev type and call
-ipv6_add_dev(), ipv6_dev_mc_inc() after register device.
-
-So I think it's OK to fix this memory consumer by calling ipv6_mc_up() for
-non-Ethernet interface.
-
-v2: Also check IFF_MULTICAST flag to make sure the interface supports
- multicast
-
-Reported-by: Rafał Miłecki <zajec5@gmail.com>
-Tested-by: Rafał Miłecki <zajec5@gmail.com>
-Fixes: 74235a25c673 ("[IPV6] addrconf: Fix IPv6 on tuntap tunnels")
-Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down")
-Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv6/addrconf.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/net/ipv6/addrconf.c
-+++ b/net/ipv6/addrconf.c
-@@ -3291,6 +3291,10 @@ static void addrconf_dev_config(struct n
- (dev->type != ARPHRD_NONE) &&
- (dev->type != ARPHRD_RAWIP)) {
- /* Alas, we support only Ethernet autoconfiguration. */
-+ idev = __in6_dev_get(dev);
-+ if (!IS_ERR_OR_NULL(idev) && dev->flags & IFF_UP &&
-+ dev->flags & IFF_MULTICAST)
-+ ipv6_mc_up(idev);
- return;
- }
-
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -1777,6 +1777,19 @@ int phy_set_max_speed(struct phy_device
+@@ -1781,6 +1781,19 @@ int phy_set_max_speed(struct phy_device
}
EXPORT_SYMBOL(phy_set_max_speed);
struct device_node *node = phydev->mdio.dev.of_node;
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -1049,6 +1049,7 @@ int phy_mii_ioctl(struct phy_device *phy
+@@ -1051,6 +1051,7 @@ int phy_mii_ioctl(struct phy_device *phy
int phy_start_interrupts(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -1790,6 +1790,36 @@ void phy_support_asym_pause(struct phy_d
+@@ -1794,6 +1794,36 @@ void phy_support_asym_pause(struct phy_d
}
EXPORT_SYMBOL(phy_support_asym_pause);
struct device_node *node = phydev->mdio.dev.of_node;
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -1050,6 +1050,7 @@ int phy_start_interrupts(struct phy_devi
+@@ -1052,6 +1052,7 @@ int phy_start_interrupts(struct phy_devi
void phy_print_status(struct phy_device *phydev);
int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
void phy_support_asym_pause(struct phy_device *phydev);
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -886,8 +886,6 @@ int phy_init_hw(struct phy_device *phyde
+@@ -890,8 +890,6 @@ int phy_init_hw(struct phy_device *phyde
if (phydev->drv->soft_reset)
ret = phydev->drv->soft_reset(phydev);
return phydev->drv->read_page(phydev);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -695,17 +695,6 @@ size_t phy_speeds(unsigned int *speeds,
+@@ -697,17 +697,6 @@ size_t phy_speeds(unsigned int *speeds,
void phy_resolve_aneg_linkmode(struct phy_device *phydev);
/**
* phy_read - Convenience function for reading a given PHY register
* @phydev: the phy_device struct
* @regnum: register number to read
-@@ -760,9 +749,60 @@ static inline int __phy_write(struct phy
+@@ -762,9 +751,60 @@ static inline int __phy_write(struct phy
val);
}
/**
* __phy_set_bits - Convenience function for setting bits in a PHY register
* @phydev: the phy_device struct
-@@ -813,6 +853,66 @@ static inline int phy_clear_bits(struct
+@@ -815,6 +855,66 @@ static inline int phy_clear_bits(struct
}
/**
* phy_interrupt_is_valid - Convenience function for testing a given PHY irq
* @phydev: the phy_device struct
*
-@@ -888,18 +988,6 @@ static inline bool phy_is_pseudo_fixed_l
+@@ -890,18 +990,6 @@ static inline bool phy_is_pseudo_fixed_l
return phydev->is_pseudo_fixed_link;
}
}
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -795,13 +795,21 @@ int phy_write_mmd(struct phy_device *phy
+@@ -797,13 +797,21 @@ int phy_write_mmd(struct phy_device *phy
*/
int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
*
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -1098,6 +1098,7 @@ int genphy_write_mmd_unsupported(struct
+@@ -1100,6 +1100,7 @@ int genphy_write_mmd_unsupported(struct
/* Clause 45 PHY */
int genphy_c45_restart_aneg(struct phy_device *phydev);
#include <linux/mdio.h>
#include <linux/io.h>
#include <linux/uaccess.h>
-@@ -944,6 +945,65 @@ void phy_attached_print(struct phy_devic
+@@ -948,6 +949,65 @@ void phy_attached_print(struct phy_devic
EXPORT_SYMBOL(phy_attached_print);
/**
* phy_attach_direct - attach a network device to a given PHY device pointer
* @dev: network device to attach
* @phydev: Pointer to phy_device to attach
-@@ -1016,6 +1076,9 @@ int phy_attach_direct(struct net_device
+@@ -1020,6 +1080,9 @@ int phy_attach_direct(struct net_device
phydev->attached_dev = dev;
dev->phydev = phydev;
/* Some Ethernet drivers try to connect to a PHY device before
* calling register_netdevice() -> netdev_register_kobject() and
* does the dev->dev.kobj initialization. Here we only check for
-@@ -1950,6 +2013,9 @@ static int phy_remove(struct device *dev
+@@ -1954,6 +2017,9 @@ static int phy_remove(struct device *dev
phydev->state = PHY_DOWN;
mutex_unlock(&phydev->lock);
struct sk_buff;
/*
-@@ -382,6 +384,8 @@ struct phy_c45_device_ids {
+@@ -383,6 +385,8 @@ struct phy_c45_device_ids {
* irq: IRQ number of the PHY's interrupt (-1 if none)
* phy_timer: The timer for handling the state machine
* phy_queue: A work_queue for the phy_mac_interrupt
* attached_dev: The attached enet driver's device instance ptr
* adjust_link: Callback for the enet controller to respond to
* changes in the link state.
-@@ -471,6 +475,9 @@ struct phy_device {
+@@ -473,6 +477,9 @@ struct phy_device {
struct mutex lock;
struct phylink *phylink;
struct net_device *attached_dev;
-@@ -1031,6 +1038,10 @@ int phy_suspend(struct phy_device *phyde
+@@ -1033,6 +1040,10 @@ int phy_suspend(struct phy_device *phyde
int phy_resume(struct phy_device *phydev);
int __phy_resume(struct phy_device *phydev);
int phy_loopback(struct phy_device *phydev, bool enable);
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -335,7 +335,7 @@ static int phy_bus_match(struct device *
+@@ -339,7 +339,7 @@ static int phy_bus_match(struct device *
if (phydev->is_c45) {
for (i = 1; i < num_ids; i++) {
continue;
if ((phydrv->phy_id & phydrv->phy_id_mask) ==
-@@ -623,10 +623,13 @@ static int get_phy_id(struct mii_bus *bu
+@@ -627,10 +627,13 @@ static int get_phy_id(struct mii_bus *bu
*/
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
{
/* For layer 4 checksum field offset. */
#include <linux/tcp.h>
#include <linux/udp.h>
-@@ -267,6 +268,7 @@ nf_flow_offload_ip_hook(void *priv, stru
+@@ -268,6 +269,7 @@ nf_flow_offload_ip_hook(void *priv, stru
skb->dev = outdev;
nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr);
skb_dst_set_noref(skb, &rt->dst);
neigh_xmit(NEIGH_ARP_TABLE, outdev, &nexthop, skb);
return NF_STOLEN;
-@@ -487,6 +489,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
+@@ -489,6 +491,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
skb->dev = outdev;
nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6);
skb_dst_set_noref(skb, &rt->dst);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -555,6 +555,12 @@ struct phy_driver {
+@@ -557,6 +557,12 @@ struct phy_driver {
/* Determines the negotiated speed and duplex */
int (*read_status)(struct phy_device *phydev);
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -1577,6 +1577,9 @@ int genphy_update_link(struct phy_device
+@@ -1581,6 +1581,9 @@ int genphy_update_link(struct phy_device
{
int status;
help
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -3253,10 +3253,20 @@ static int xmit_one(struct sk_buff *skb,
+@@ -3255,10 +3255,20 @@ static int xmit_one(struct sk_buff *skb,
if (!list_empty(&ptype_all) || !list_empty(&dev->ptype_all))
dev_queue_xmit_nit(skb, dev);
u64 res;
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
-@@ -425,6 +425,7 @@ config INET_XFRM_MODE_BEET
+@@ -426,6 +426,7 @@ config INET_XFRM_MODE_BEET
config INET_DIAG
tristate "INET: socket monitoring interface"
if (!pe)
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
-@@ -2749,6 +2749,8 @@ static const struct seq_operations vmall
+@@ -2752,6 +2752,8 @@ static const struct seq_operations vmall
static int __init proc_vmalloc_init(void)
{
--- a/net/core/sock.c
+++ b/net/core/sock.c
-@@ -3486,6 +3486,8 @@ static __net_initdata struct pernet_oper
+@@ -3489,6 +3489,8 @@ static __net_initdata struct pernet_oper
static int __init proto_init(void)
{
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
-@@ -2717,11 +2717,13 @@ static const struct seq_operations fib_r
+@@ -2720,11 +2720,13 @@ static const struct seq_operations fib_r
int __net_init fib_proc_init(struct net *net)
{
fib_triestat_seq_show, NULL))
goto out2;
-@@ -2732,17 +2734,21 @@ int __net_init fib_proc_init(struct net
+@@ -2735,17 +2737,21 @@ int __net_init fib_proc_init(struct net
return 0;
out3:
+++ /dev/null
-From 9d2e23253eb5fabff02a7ce4be9c4a7fc23562e8 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 20 Mar 2020 22:56:28 +0100
-Subject: [PATCH v2 3/3] USB: serial: option: add Wistron Neweb D19Q1
-
-This modem is embedded on dlink dwr-960 router.
-The oem configuration states:
-
-T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
-D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
-P: Vendor=1435 ProdID=d191 Rev=ff.ff
-S: Manufacturer=Android
-S: Product=Android
-S: SerialNumber=0123456789ABCDEF
-C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
-I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
-E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
-E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
-E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
-E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
-E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
-E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
-E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
-E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
-E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
-
-Tested on openwrt distribution
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- drivers/usb/serial/option.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/usb/serial/option.c
-+++ b/drivers/usb/serial/option.c
-@@ -1990,6 +1990,8 @@ static const struct usb_device_id option
- { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
-+ { USB_DEVICE_INTERFACE_CLASS(0x1435, 0xd191, 0xff), /* Wistron Neweb D19Q1 */
-+ .driver_info = RSVD(1) | RSVD(4) },
- { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */
- .driver_info = RSVD(4) },
- { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff), /* BroadMobi BM818 */
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
-@@ -2174,12 +2176,12 @@ static int tpacket_rcv(struct sk_buff *s
+@@ -2175,12 +2177,12 @@ static int tpacket_rcv(struct sk_buff *s
BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
-@@ -3265,6 +3267,7 @@ static int packet_create(struct net *net
+@@ -3277,6 +3279,7 @@ static int packet_create(struct net *net
mutex_init(&po->pg_vec_lock);
po->rollover = NULL;
po->prot_hook.func = packet_rcv;
if (sock->type == SOCK_PACKET)
po->prot_hook.func = packet_rcv_spkt;
-@@ -3885,6 +3888,16 @@ packet_setsockopt(struct socket *sock, i
+@@ -3897,6 +3900,16 @@ packet_setsockopt(struct socket *sock, i
po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
return 0;
}
default:
return -ENOPROTOOPT;
}
-@@ -3937,6 +3950,13 @@ static int packet_getsockopt(struct sock
+@@ -3949,6 +3962,13 @@ static int packet_getsockopt(struct sock
case PACKET_VNET_HDR:
val = po->has_vnet_hdr;
break;
break;
--- a/net/packet/internal.h
+++ b/net/packet/internal.h
-@@ -132,6 +132,7 @@ struct packet_sock {
+@@ -135,6 +135,7 @@ struct packet_sock {
struct net_device __rcu *cached_dev;
int (*xmit)(struct sk_buff *skb);
struct packet_type prot_hook ____cacheline_aligned_in_smp;
static void rt_fibinfo_free(struct rtable __rcu **rtp)
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
-@@ -2474,6 +2474,7 @@ static const char *const rtn_type_names[
+@@ -2477,6 +2477,7 @@ static const char *const rtn_type_names[
[RTN_THROW] = "THROW",
[RTN_NAT] = "NAT",
[RTN_XRESOLVE] = "XRESOLVE",
__u16 tc_index; /* traffic control index */
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -5454,6 +5454,9 @@ static enum gro_result dev_gro_receive(s
+@@ -5456,6 +5456,9 @@ static enum gro_result dev_gro_receive(s
int same_flow;
int grow;
if (netif_elide_gro(skb->dev))
goto normal;
-@@ -7112,6 +7115,48 @@ static void __netdev_adjacent_dev_unlink
+@@ -7114,6 +7117,48 @@ static void __netdev_adjacent_dev_unlink
&upper_dev->adj_list.lower);
}
static int __netdev_upper_dev_link(struct net_device *dev,
struct net_device *upper_dev, bool master,
void *upper_priv, void *upper_info,
-@@ -7162,6 +7207,7 @@ static int __netdev_upper_dev_link(struc
+@@ -7164,6 +7209,7 @@ static int __netdev_upper_dev_link(struc
if (ret)
return ret;
ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
&changeupper_info.info);
ret = notifier_to_errno(ret);
-@@ -7254,6 +7300,7 @@ void netdev_upper_dev_unlink(struct net_
+@@ -7256,6 +7302,7 @@ void netdev_upper_dev_unlink(struct net_
__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
&changeupper_info.info);
-@@ -7893,6 +7940,7 @@ int dev_set_mac_address(struct net_devic
+@@ -7895,6 +7942,7 @@ int dev_set_mac_address(struct net_devic
if (err)
return err;
dev->addr_assign_type = NET_ADDR_SET;
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -1201,6 +1201,9 @@ void phy_detach(struct phy_device *phyde
+@@ -1205,6 +1205,9 @@ void phy_detach(struct phy_device *phyde
struct module *ndev_owner = dev->dev.parent->driver->owner;
struct mii_bus *bus;
sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev");
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -567,6 +567,12 @@ struct phy_driver {
+@@ -569,6 +569,12 @@ struct phy_driver {
*/
int (*did_interrupt)(struct phy_device *phydev);
create mode 100644 arch/arm/boot/dts/imx6q-gw5907.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-gw5907.dtsi
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 1e9e1af..9ee80e2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -422,6 +422,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+@@ -404,6 +404,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-gw560x.dtb \
imx6dl-gw5903.dtb \
imx6dl-gw5904.dtb \
imx6dl-hummingboard.dtb \
imx6dl-hummingboard-emmc-som-v15.dtb \
imx6dl-hummingboard-som-v15.dtb \
-@@ -493,6 +494,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+@@ -471,6 +472,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-gw560x.dtb \
imx6q-gw5903.dtb \
imx6q-gw5904.dtb \
imx6q-h100.dtb \
imx6q-hummingboard.dtb \
imx6q-hummingboard-emmc-som-v15.dtb \
-diff --git a/arch/arm/boot/dts/imx6dl-gw5907.dts b/arch/arm/boot/dts/imx6dl-gw5907.dts
-new file mode 100644
-index 00000000..3fa2822
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5907.dts
@@ -0,0 +1,14 @@
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
+ compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
+};
-diff --git a/arch/arm/boot/dts/imx6q-gw5907.dts b/arch/arm/boot/dts/imx6q-gw5907.dts
-new file mode 100644
-index 00000000..b25526e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5907.dts
@@ -0,0 +1,14 @@
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
+ compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
+};
-diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
-new file mode 100644
-index 00000000..0bdebdd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -0,0 +1,399 @@
+ >;
+ };
+};
---
-2.7.4
-
create mode 100644 arch/arm/boot/dts/imx6q-gw5910.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 9ee80e2..85e53cc 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -423,6 +423,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+@@ -405,6 +405,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-gw5903.dtb \
imx6dl-gw5904.dtb \
imx6dl-gw5907.dtb \
imx6dl-hummingboard.dtb \
imx6dl-hummingboard-emmc-som-v15.dtb \
imx6dl-hummingboard-som-v15.dtb \
-@@ -495,6 +496,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+@@ -473,6 +474,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-gw5903.dtb \
imx6q-gw5904.dtb \
imx6q-gw5907.dtb \
imx6q-h100.dtb \
imx6q-hummingboard.dtb \
imx6q-hummingboard-emmc-som-v15.dtb \
-diff --git a/arch/arm/boot/dts/imx6dl-gw5910.dts b/arch/arm/boot/dts/imx6dl-gw5910.dts
-new file mode 100644
-index 00000000..0d5e7e5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5910.dts
@@ -0,0 +1,14 @@
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";
+ compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";
+};
-diff --git a/arch/arm/boot/dts/imx6q-gw5910.dts b/arch/arm/boot/dts/imx6q-gw5910.dts
-new file mode 100644
-index 00000000..6aafa2f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5910.dts
@@ -0,0 +1,14 @@
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";
+ compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";
+};
-diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-new file mode 100644
-index 00000000..be1af74
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -0,0 +1,491 @@
+ >;
+ };
+};
---
-2.7.4
-
create mode 100644 arch/arm/boot/dts/imx6q-gw5913.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-gw5913.dtsi
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 85e53cc..5b059fc 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -424,6 +424,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+@@ -406,6 +406,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-gw5904.dtb \
imx6dl-gw5907.dtb \
imx6dl-gw5910.dtb \
imx6dl-hummingboard.dtb \
imx6dl-hummingboard-emmc-som-v15.dtb \
imx6dl-hummingboard-som-v15.dtb \
-@@ -497,6 +498,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+@@ -475,6 +476,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-gw5904.dtb \
imx6q-gw5907.dtb \
imx6q-gw5910.dtb \
imx6q-h100.dtb \
imx6q-hummingboard.dtb \
imx6q-hummingboard-emmc-som-v15.dtb \
-diff --git a/arch/arm/boot/dts/imx6dl-gw5913.dts b/arch/arm/boot/dts/imx6dl-gw5913.dts
-new file mode 100644
-index 00000000..b74e533
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5913.dts
@@ -0,0 +1,14 @@
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
+ compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
+};
-diff --git a/arch/arm/boot/dts/imx6q-gw5913.dts b/arch/arm/boot/dts/imx6q-gw5913.dts
-new file mode 100644
-index 00000000..6f511f1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5913.dts
@@ -0,0 +1,14 @@
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
+ compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
+};
-diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
-new file mode 100644
-index 00000000..635c203
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -0,0 +1,348 @@
+ >;
+ };
+};
---
-2.7.4
-
create mode 100644 arch/arm/boot/dts/imx6q-gw5912.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-gw5912.dtsi
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 5b059fc..1a32a7d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -424,6 +424,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+@@ -406,6 +406,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-gw5904.dtb \
imx6dl-gw5907.dtb \
imx6dl-gw5910.dtb \
imx6dl-gw5913.dtb \
imx6dl-hummingboard.dtb \
imx6dl-hummingboard-emmc-som-v15.dtb \
-@@ -498,6 +499,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
+@@ -476,6 +477,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-gw5904.dtb \
imx6q-gw5907.dtb \
imx6q-gw5910.dtb \
imx6q-gw5913.dtb \
imx6q-h100.dtb \
imx6q-hummingboard.dtb \
-diff --git a/arch/arm/boot/dts/imx6dl-gw5912.dts b/arch/arm/boot/dts/imx6dl-gw5912.dts
-new file mode 100644
-index 00000000..5260e01
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5912.dts
@@ -0,0 +1,13 @@
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912";
+ compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl";
+};
-diff --git a/arch/arm/boot/dts/imx6q-gw5912.dts b/arch/arm/boot/dts/imx6q-gw5912.dts
-new file mode 100644
-index 00000000..4dcbd94
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5912.dts
@@ -0,0 +1,13 @@
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5912";
+ compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q";
+};
-diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
-new file mode 100644
-index 00000000..8c57fd2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -0,0 +1,461 @@
+ >;
+ };
+};
---
-2.7.4
-
---
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4272,6 +4272,15 @@ static int mvneta_ethtool_set_eee(struct
+@@ -4271,6 +4271,15 @@ static int mvneta_ethtool_set_eee(struct
return phylink_ethtool_set_eee(pp->phylink, eee);
}
static const struct net_device_ops mvneta_netdev_ops = {
.ndo_open = mvneta_open,
.ndo_stop = mvneta_stop,
-@@ -4282,6 +4291,7 @@ static const struct net_device_ops mvnet
+@@ -4281,6 +4290,7 @@ static const struct net_device_ops mvnet
.ndo_fix_features = mvneta_fix_features,
.ndo_get_stats64 = mvneta_get_stats64,
.ndo_do_ioctl = mvneta_ioctl,
#define MVNETA_MIB_COUNTERS_BASE 0x3000
#define MVNETA_MIB_LATE_COLLISION 0x7c
#define MVNETA_DA_FILT_SPEC_MCAST 0x3400
-@@ -3359,6 +3361,7 @@ static void mvneta_validate(struct net_d
+@@ -3358,6 +3360,7 @@ static void mvneta_validate(struct net_d
if (state->interface != PHY_INTERFACE_MODE_NA &&
state->interface != PHY_INTERFACE_MODE_QSGMII &&
state->interface != PHY_INTERFACE_MODE_SGMII &&
!phy_interface_mode_is_8023z(state->interface) &&
!phy_interface_mode_is_rgmii(state->interface)) {
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-@@ -3371,9 +3374,15 @@ static void mvneta_validate(struct net_d
+@@ -3370,9 +3373,15 @@ static void mvneta_validate(struct net_d
/* Asymmetric pause is unsupported */
phylink_set(mask, Pause);
if (!phy_interface_mode_is_8023z(state->interface)) {
/* 10M and 100M are only supported in non-802.3z mode */
-@@ -3434,12 +3443,14 @@ static void mvneta_mac_config(struct net
+@@ -3433,12 +3442,14 @@ static void mvneta_mac_config(struct net
struct mvneta_port *pp = netdev_priv(ndev);
u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_INBAND_RESTART_AN |
-@@ -3472,7 +3483,7 @@ static void mvneta_mac_config(struct net
+@@ -3471,7 +3482,7 @@ static void mvneta_mac_config(struct net
if (state->duplex)
new_an |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED;
else if (state->speed == SPEED_100)
new_an |= MVNETA_GMAC_CONFIG_MII_SPEED;
-@@ -3511,10 +3522,18 @@ static void mvneta_mac_config(struct net
+@@ -3510,10 +3521,18 @@ static void mvneta_mac_config(struct net
MVNETA_GMAC_FORCE_LINK_DOWN);
}
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -3361,7 +3361,6 @@ static void mvneta_validate(struct net_d
+@@ -3360,7 +3360,6 @@ static void mvneta_validate(struct net_d
if (state->interface != PHY_INTERFACE_MODE_NA &&
state->interface != PHY_INTERFACE_MODE_QSGMII &&
state->interface != PHY_INTERFACE_MODE_SGMII &&
!phy_interface_mode_is_8023z(state->interface) &&
!phy_interface_mode_is_rgmii(state->interface)) {
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-@@ -3375,14 +3374,9 @@ static void mvneta_validate(struct net_d
+@@ -3374,14 +3373,9 @@ static void mvneta_validate(struct net_d
/* Asymmetric pause is unsupported */
phylink_set(mask, Pause);
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4268,8 +4268,7 @@ static int mvneta_ethtool_set_eee(struct
+@@ -4267,8 +4267,7 @@ static int mvneta_ethtool_set_eee(struct
/* The Armada 37x documents do not give limits for this other than
* it being an 8-bit register. */
struct mvneta_bm *bm_priv;
struct mvneta_bm_pool *pool_long;
-@@ -3168,6 +3170,8 @@ static void mvneta_start_dev(struct mvne
+@@ -3167,6 +3169,8 @@ static void mvneta_start_dev(struct mvne
{
int cpu;
mvneta_max_rx_size_set(pp, pp->pkt_size);
mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
-@@ -3230,6 +3234,8 @@ static void mvneta_stop_dev(struct mvnet
+@@ -3229,6 +3233,8 @@ static void mvneta_stop_dev(struct mvnet
mvneta_tx_reset(pp);
mvneta_rx_reset(pp);
}
static void mvneta_percpu_enable(void *arg)
-@@ -3355,6 +3361,7 @@ static int mvneta_set_mac_addr(struct ne
+@@ -3354,6 +3360,7 @@ static int mvneta_set_mac_addr(struct ne
static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
struct phylink_link_state *state)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
/* We only support QSGMII, SGMII, 802.3z and RGMII modes */
-@@ -3375,8 +3382,13 @@ static void mvneta_validate(struct net_d
+@@ -3374,8 +3381,13 @@ static void mvneta_validate(struct net_d
phylink_set(mask, Pause);
/* Half-duplex at speeds higher than 100Mbit is unsupported */
if (!phy_interface_mode_is_8023z(state->interface)) {
/* 10M and 100M are only supported in non-802.3z mode */
-@@ -3390,6 +3402,11 @@ static void mvneta_validate(struct net_d
+@@ -3389,6 +3401,11 @@ static void mvneta_validate(struct net_d
__ETHTOOL_LINK_MODE_MASK_NBITS);
bitmap_and(state->advertising, state->advertising, mask,
__ETHTOOL_LINK_MODE_MASK_NBITS);
}
static int mvneta_mac_link_state(struct net_device *ndev,
-@@ -3401,7 +3418,9 @@ static int mvneta_mac_link_state(struct
+@@ -3400,7 +3417,9 @@ static int mvneta_mac_link_state(struct
gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
if (gmac_stat & MVNETA_GMAC_SPEED_1000)
else if (gmac_stat & MVNETA_GMAC_SPEED_100)
state->speed = SPEED_100;
else
-@@ -3516,12 +3535,20 @@ static void mvneta_mac_config(struct net
+@@ -3515,12 +3534,20 @@ static void mvneta_mac_config(struct net
MVNETA_GMAC_FORCE_LINK_DOWN);
}
if (new_ctrl0 != gmac_ctrl0)
mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
if (new_ctrl2 != gmac_ctrl2)
-@@ -4434,7 +4461,7 @@ static int mvneta_port_power_up(struct m
+@@ -4433,7 +4460,7 @@ static int mvneta_port_power_up(struct m
if (phy_mode == PHY_INTERFACE_MODE_QSGMII)
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
else if (phy_mode == PHY_INTERFACE_MODE_SGMII ||
mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
else if (!phy_interface_mode_is_rgmii(phy_mode))
return -EINVAL;
-@@ -4451,6 +4478,7 @@ static int mvneta_probe(struct platform_
+@@ -4450,6 +4477,7 @@ static int mvneta_probe(struct platform_
struct mvneta_port *pp;
struct net_device *dev;
struct phylink *phylink;
const char *dt_mac_addr;
char hw_mac_addr[ETH_ALEN];
const char *mac_from;
-@@ -4476,6 +4504,14 @@ static int mvneta_probe(struct platform_
+@@ -4475,6 +4503,14 @@ static int mvneta_probe(struct platform_
goto err_free_irq;
}
phylink = phylink_create(dev, pdev->dev.fwnode, phy_mode,
&mvneta_phylink_ops);
if (IS_ERR(phylink)) {
-@@ -4492,6 +4528,7 @@ static int mvneta_probe(struct platform_
+@@ -4491,6 +4527,7 @@ static int mvneta_probe(struct platform_
pp = netdev_priv(dev);
spin_lock_init(&pp->lock);
pp->phylink = phylink;
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -3166,11 +3166,26 @@ static int mvneta_setup_txqs(struct mvne
+@@ -3165,11 +3165,26 @@ static int mvneta_setup_txqs(struct mvne
return 0;
}
mvneta_max_rx_size_set(pp, pp->pkt_size);
mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
-@@ -3542,12 +3557,15 @@ static void mvneta_mac_config(struct net
+@@ -3541,12 +3556,15 @@ static void mvneta_mac_config(struct net
if (state->speed == SPEED_2500)
new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE;
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -3402,6 +3402,7 @@ static void mvneta_validate(struct net_d
+@@ -3401,6 +3401,7 @@ static void mvneta_validate(struct net_d
phylink_set(mask, 1000baseX_Full);
}
if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX) {
projects / oweals / openwrt.git / commitdiff