target/linux/ramips/dts/mt7628an_zbtlink_zbt-we1226.dts

   1 /dts-v1/;
   2 #include <dt-bindings/input/input.h>
   3 #include <dt-bindings/gpio/gpio.h>
   4
   5 #include "mt7628an.dtsi"
   6
   7 / {
   8         compatible = "zbtlink,zbt-we1226", "mediatek,mt7628an-soc";
   9         model = "Zbtlink ZBT-WE1226";
  10
  11         aliases {
  12                 led-boot = &led_wlan;
  13                 led-failsafe = &led_wlan;
  14                 led-running = &led_wlan;
  15                 led-upgrade = &led_wlan;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200";
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys";
  24
  25                 reset {
  26                         label = "reset";
  27                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  28                         linux,code = <KEY_RESTART>;
  29                 };
  30         };
  31
  32         leds {
  33                 compatible = "gpio-leds";
  34
  35                 wan {
  36                         label = "zbt-we1226:green:wan";
  37                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 lan1 {
  41                         label = "zbt-we1226:green:lan1";
  42                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 lan2 {
  46                         label = "zbt-we1226:green:lan2";
  47                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 led_wlan: wlan {
  51                         label = "zbt-we1226:green:wlan";
  52                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  53                 };
  54         };
  55 };
  56
  57 &state_default {
  58         gpio {
  59                 ralink,group = "p0led_an", "p1led_an", "p4led_an", "wdt", "wled_an";
  60                 ralink,function = "gpio";
  61         };
  62 };
  63
  64 &spi0 {
  65         status = "okay";
  66
  67         m25p80@0 {
  68                 compatible = "jedec,spi-nor";
  69                 reg = <0>;
  70                 spi-max-frequency = <10000000>;
  71
  72                 partitions {
  73                         compatible = "fixed-partitions";
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76
  77                         partition@0 {
  78                                 label = "u-boot";
  79                                 reg = <0x0 0x30000>;
  80                                 read-only;
  81                         };
  82
  83                         partition@30000 {
  84                                 label = "u-boot-env";
  85                                 reg = <0x30000 0x10000>;
  86                                 read-only;
  87                         };
  88
  89                         factory: partition@40000 {
  90                                 label = "factory";
  91                                 reg = <0x40000 0x10000>;
  92                                 read-only;
  93                         };
  94
  95                         partition@50000 {
  96                                 compatible = "denx,uimage";
  97                                 label = "firmware";
  98                                 reg = <0x50000 0x7b0000>;
  99                         };
 100                 };
 101         };
 102 };
 103
 104 &wmac {
 105         status = "okay";
 106 };
 107
 108 &ethernet {
 109         mtd-mac-address = <&factory 0x2e>;
 110 };
 111
 112 &esw {
 113         mediatek,portmap = <0x2f>;
 114 };