target/linux/ramips/dts/mt7620n_ravpower_wd03.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "ravpower,wd03", "ralink,mt7620n-soc";
  10         model = "Ravpower WD03";
  11
  12         chosen {
  13                 bootargs = "console=ttyS0,115200";
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 green-wifi {
  20                         label = "wd03:green:wifi";
  21                         gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
  22                 };
  23
  24                 blue-wifi {
  25                         label = "wd03:blue:wifi";
  26                         gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
  27                 };
  28         };
  29
  30         keys {
  31                 compatible = "gpio-keys";
  32
  33                 reset {
  34                         label = "reset";
  35                         gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
  36                         linux,code = <KEY_RESTART>;
  37                 };
  38         };
  39 };
  40
  41 &gpio2 {
  42         status = "okay";
  43 };
  44
  45 &gpio3 {
  46         status = "okay";
  47 };
  48
  49 &i2c {
  50         status = "okay";
  51 };
  52
  53 &spi0 {
  54         status = "okay";
  55
  56         m25p80@0 {
  57                 compatible = "jedec,spi-nor";
  58                 reg = <0>;
  59                 spi-max-frequency = <10000000>;
  60
  61                 partitions {
  62                         compatible = "fixed-partitions";
  63                         #address-cells = <1>;
  64                         #size-cells = <1>;
  65
  66                         partition@0 {
  67                                 label = "u-boot";
  68                                 reg = <0x0 0x30000>;
  69                                 read-only;
  70                         };
  71
  72                         partition@30000 {
  73                                 label = "u-boot-env";
  74                                 reg = <0x30000 0x10000>;
  75                                 read-only;
  76                         };
  77
  78                         factory: partition@40000 {
  79                                 label = "factory";
  80                                 reg = <0x40000 0x10000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@50000 {
  85                                 compatible = "denx,uimage";
  86                                 label = "firmware";
  87                                 reg = <0x50000 0x7b0000>;
  88                         };
  89                 };
  90         };
  91 };
  92
  93 &ehci {
  94         status = "okay";
  95 };
  96
  97 &ohci {
  98         status = "okay";
  99 };
 100
 101 &ethernet {
 102         mtd-mac-address = <&factory 0x4000>;
 103         ralink,port-map = "wllll";
 104 };
 105
 106 &wmac {
 107         ralink,mtd-eeprom = <&factory 0>;
 108 };
 109
 110 &state_default {
 111         gpio {
 112                 ralink,group = "wled", "ephy";
 113                 ralink,function = "gpio";
 114         };
 115 };