target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2 #include <dt-bindings/input/input.h>
   3
   4 #include "mt7620a.dtsi"
   5
   6 / {
   7         chosen {
   8                 bootargs = "console=ttyS0,57600";
   9         };
  10
  11         keys {
  12                 compatible = "gpio-keys";
  13
  14                 reset {
  15                         label = "reset";
  16                         gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
  17                         linux,code = <KEY_RESTART>;
  18                 };
  19
  20                 wps {
  21                         label = "wps";
  22                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  23                         linux,code = <KEY_WPS_BUTTON>;
  24                 };
  25         };
  26 };
  27
  28 &gpio0 {
  29         status = "okay";
  30 };
  31
  32 &gpio2 {
  33         status = "okay";
  34 };
  35
  36 &spi0 {
  37         status = "okay";
  38
  39         flash@0 {
  40                 compatible = "jedec,spi-nor";
  41                 reg = <0>;
  42                 spi-max-frequency = <50000000>;
  43
  44                 partitions {
  45                         compatible = "fixed-partitions";
  46                         #address-cells = <1>;
  47                         #size-cells = <1>;
  48
  49                         partition@0 {
  50                                 label = "u-boot";
  51                                 reg = <0x0 0x30000>;
  52                                 read-only;
  53                         };
  54
  55                         partition@30000 {
  56                                 label = "config";
  57                                 reg = <0x30000 0x10000>;
  58                                 read-only;
  59                         };
  60
  61                         factory: partition@40000 {
  62                                 label = "factory";
  63                                 reg = <0x40000 0x10000>;
  64                                 read-only;
  65                         };
  66
  67                         partition@50000 {
  68                                 compatible = "denx,uimage";
  69                                 label = "firmware";
  70                                 reg = <0x50000 0x790000>;
  71                         };
  72
  73                         partition@7e0000 {
  74                                 label = "board_data";
  75                                 reg = <0x7e0000 0x10000>;
  76                                 read-only;
  77                         };
  78
  79                         partition@7f0000 {
  80                                 label = "nvram";
  81                                 reg = <0x7f0000 0x10000>;
  82                                 read-only;
  83                         };
  84                 };
  85         };
  86 };
  87
  88 &pcie {
  89         status = "okay";
  90 };
  91
  92 &pcie0 {
  93         mt76@0,0 {
  94                 reg = <0x0000 0 0 0 0>;
  95                 mediatek,mtd-eeprom = <&factory 0x8000>;
  96                 ieee80211-freq-limit = <5000000 6000000>;
  97         };
  98 };
  99
 100 &ethernet {
 101         mtd-mac-address = <&factory 0x28>;
 102 };
 103
 104 &wmac {
 105         ralink,mtd-eeprom = <&factory 0x0>;
 106 };
 107
 108 &state_default {
 109         default {
 110                 groups = "i2c", "rgmii2", "spi refclk";
 111                 function = "gpio";
 112         };
 113 };