target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  *
   3  * Permission to use, copy, modify, and/or distribute this software for any
   4  * purpose with or without fee is hereby granted, provided that the above
   5  * copyright notice and this permission notice appear in all copies.
   6  *
   7  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   8  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
   9  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  10  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  11  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  12  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  13  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  14  *
  15  */
  16
  17 #include "qcom-ipq4019.dtsi"
  18 #include <dt-bindings/gpio/gpio.h>
  19 #include <dt-bindings/input/input.h>
  20 #include <dt-bindings/soc/qcom,tcsr.h>
  21
  22 / {
  23         model = "GL.iNet GL-B1300";
  24         compatible = "glinet,gl-b1300";
  25
  26         aliases {
  27                 led-boot = &power;
  28                 led-failsafe = &power;
  29                 led-running = &power;
  30                 led-upgrade = &power;
  31         };
  32
  33         memory {
  34                 device_type = "memory";
  35                 reg = <0x80000000 0x10000000>;
  36         };
  37
  38         soc {
  39                 rng@22000 {
  40                         status = "okay";
  41                 };
  42
  43                 mdio@90000 {
  44                         status = "okay";
  45                 };
  46
  47                 ess-psgmii@98000 {
  48                         status = "okay";
  49                 };
  50
  51                 tcsr@1949000 {
  52                         compatible = "qcom,tcsr";
  53                         reg = <0x1949000 0x100>;
  54                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  55                 };
  56
  57                 tcsr@194b000 {
  58                         /* select hostmode */
  59                         compatible = "qcom,tcsr";
  60                         reg = <0x194b000 0x100>;
  61                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  62                         status = "okay";
  63                 };
  64
  65                 ess_tcsr@1953000 {
  66                         compatible = "qcom,tcsr";
  67                         reg = <0x1953000 0x1000>;
  68                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  69                 };
  70
  71                 tcsr@1957000 {
  72                         compatible = "qcom,tcsr";
  73                         reg = <0x1957000 0x100>;
  74                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  75                 };
  76
  77                 usb2@60f8800 {
  78                         status = "okay";
  79                 };
  80
  81                 usb3@8af8800 {
  82                         status = "okay";
  83                 };
  84
  85                 crypto@8e3a000 {
  86                         status = "okay";
  87                 };
  88
  89                 watchdog@b017000 {
  90                         status = "okay";
  91                 };
  92
  93                 ess-switch@c000000 {
  94                         status = "okay";
  95                         switch_lan_bmp = <0x18>;
  96                         switch_wan_bmp = <0x20>;
  97                 };
  98
  99                 edma@c080000 {
 100                         status = "okay";
 101                 };
 102         };
 103
 104         keys {
 105                 compatible = "gpio-keys";
 106
 107                 wps {
 108                         label = "wps";
 109                         gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 110                         linux,code = <KEY_WPS_BUTTON>;
 111                 };
 112
 113                 reset {
 114                         label = "reset";
 115                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 116                         linux,code = <KEY_RESTART>;
 117                 };
 118         };
 119
 120         leds {
 121                 compatible = "gpio-leds";
 122
 123                 power: power {
 124                         label = "gl-b1300:green:power";
 125                         gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
 126                         default-state = "on";
 127                 };
 128
 129                 mesh {
 130                         label = "gl-b1300:green:mesh";
 131                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 132                 };
 133
 134                 wlan {
 135                         label = "gl-b1300:green:wlan";
 136                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 137                 };
 138         };
 139 };
 140
 141 &blsp_dma {
 142         status = "okay";
 143 };
 144
 145 &cryptobam {
 146         status = "okay";
 147 };
 148
 149 &blsp1_spi1 {
 150         pinctrl-0 = <&spi_0_pins>;
 151         pinctrl-names = "default";
 152         status = "okay";
 153         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 154
 155         mx25l25635f@0 {
 156                 compatible = "jedec,spi-nor";
 157                 reg = <0>;
 158                 spi-max-frequency = <24000000>;
 159
 160                 partitions {
 161                         compatible = "fixed-partitions";
 162                         #address-cells = <1>;
 163                         #size-cells = <1>;
 164
 165                         SBL1@0 {
 166                                 label = "SBL1";
 167                                 reg = <0x0 0x40000>;
 168                                 read-only;
 169                         };
 170
 171                         MIBIB@40000 {
 172                                 label = "MIBIB";
 173                                 reg = <0x40000 0x20000>;
 174                                 read-only;
 175                         };
 176
 177                         QSEE@60000 {
 178                                 label = "QSEE";
 179                                 reg = <0x60000 0x60000>;
 180                                 read-only;
 181                         };
 182
 183                         CDT@c0000 {
 184                                 label = "CDT";
 185                                 reg = <0xc0000 0x10000>;
 186                                 read-only;
 187                         };
 188
 189                         DDRPARAMS@d0000 {
 190                                 label = "DDRPARAMS";
 191                                 reg = <0xd0000 0x10000>;
 192                                 read-only;
 193                         };
 194
 195                         APPSBLENV@e0000 {
 196                                 label = "APPSBLENV";
 197                                 reg = <0xe0000 0x10000>;
 198                                 read-only;
 199                         };
 200
 201                         APPSBL@f0000 {
 202                                 label = "APPSBL";
 203                                 reg = <0xf0000 0x80000>;
 204                                 read-only;
 205                         };
 206
 207                         ART@170000 {
 208                                 label = "ART";
 209                                 reg = <0x170000 0x10000>;
 210                                 read-only;
 211                         };
 212
 213                         firmware@180000 {
 214                                 compatible = "denx,fit";
 215                                 label = "firmware";
 216                                 reg = <0x180000 0x1e80000>;
 217                         };
 218                 };
 219         };
 220 };
 221
 222 &blsp1_uart1 {
 223         pinctrl-0 = <&serial_pins>;
 224         pinctrl-names = "default";
 225         status = "okay";
 226 };
 227
 228 &tlmm {
 229         serial_pins: serial_pinmux {
 230                 mux {
 231                         pins = "gpio60", "gpio61";
 232                         function = "blsp_uart0";
 233                         bias-disable;
 234                 };
 235         };
 236
 237         spi_0_pins: spi_0_pinmux {
 238                 pinmux {
 239                         function = "blsp_spi0";
 240                         pins = "gpio55", "gpio56", "gpio57";
 241                 };
 242                 pinmux_cs {
 243                         function = "gpio";
 244                         pins = "gpio54";
 245                 };
 246                 pinconf {
 247                         pins = "gpio55", "gpio56", "gpio57";
 248                         drive-strength = <12>;
 249                         bias-disable;
 250                 };
 251                 pinconf_cs {
 252                         pins = "gpio54";
 253                         drive-strength = <2>;
 254                         bias-disable;
 255                         output-high;
 256                 };
 257         };
 258 };
 259
 260 &usb2_hs_phy {
 261         status = "okay";
 262 };
 263
 264 &usb3_hs_phy {
 265         status = "okay";
 266 };
 267
 268 &usb3_ss_phy {
 269         status = "okay";
 270 };
 271
 272 &wifi0 {
 273         status = "okay";
 274         qcom,ath10k-calibration-variant = "GL-B1300";
 275 };
 276
 277 &wifi1 {
 278         status = "okay";
 279         qcom,ath10k-calibration-variant = "GL-B1300";
 280 };