target/linux/brcm63xx/dts/dsl-274xb-f.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "D-Link DSL-2740B/DSL-2741B rev F1";
   9         compatible = "d-link,dsl-274xb-f", "brcm,bcm6328";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13         };
  14
  15         gpio-keys-polled {
  16                 compatible = "gpio-keys-polled";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 poll-interval = <20>;
  20                 debounce-interval = <60>;
  21
  22                 wifi {
  23                         label = "wifi";
  24                         gpios = <&gpio0 10 1>;
  25                         linux,code = <KEY_WLAN>;
  26                 };
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&gpio0 23 1>;
  30                         linux,code = <KEY_RESTART>;
  31                 };
  32                 wps {
  33                         label = "wps";
  34                         gpios = <&gpio0 24 1>;
  35                         linux,code = <KEY_WPS_BUTTON>;
  36                 };
  37         };
  38
  39         gpio-leds {
  40                 compatible = "gpio-leds";
  41
  42                 inet_red {
  43                         label = "dsl-274xb:red:internet";
  44                         gpios = <&gpio0 2 1>;
  45                 };
  46                 dsl_green {
  47                         label = "dsl-274xb:green:dsl";
  48                         gpios = <&gpio0 3 1>;
  49                 };
  50                 power_green {
  51                         label = "dsl-274xb:green:power";
  52                         gpios = <&gpio0 4 1>;
  53                         default-state = "on";
  54                 };
  55                 power_red {
  56                         label = "dsl-274xb:red:power";
  57                         gpios = <&gpio0 8 1>;
  58                 };
  59                 wps_blue {
  60                         label = "dsl-274xb:blue:wps";
  61                         gpios = <&gpio0 9 1>;
  62                 };
  63                 inet_green {
  64                         label = "dsl-274xb:green:internet";
  65                         gpios = <&gpio0 11 1>;
  66                 };
  67         };
  68 };
  69
  70 &hsspi {
  71         status = "ok";
  72
  73         flash@0 {
  74                 compatible = "jedec,spi-nor";
  75                 spi-max-frequency = <16666667>;
  76                 spi-tx-bus-width = <2>;
  77                 spi-rx-bus-width = <2>;
  78                 reg = <0>;
  79
  80                 #address-cells = <1>;
  81                 #size-cells = <1>;
  82
  83                 linux,part-probe = "bcm63xxpart";
  84
  85                 cfe@0 {
  86                         reg = <0x000000 0x010000>;
  87                         label = "cfe";
  88                         read-only;
  89                 };
  90
  91                 linux@10000 {
  92                         reg = <0x010000 0x7c0000>;
  93                         label = "linux";
  94                 };
  95
  96                 cal_data@7d0000 {
  97                         reg = <0x7d0000 0x010000>;
  98                         label = "cal_data";
  99                         read-only;
 100                 };
 101
 102                 nvram@7e0000 {
 103                         reg = <0x7e0000 0x020000>;
 104                         label = "nvram";
 105                 };
 106         };
 107 };