target/linux/brcm63xx/dts/bcm6328-adb-a4001n1.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "ADB P.DG A4001N1";
   9         compatible = "adb,a4001n1", "brcm,bcm6328";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21
  22                 reset {
  23                         label = "reset";
  24                         gpios = <&pinctrl 23 1>;
  25                         linux,code = <KEY_RESTART>;
  26                         debounce-interval = <60>;
  27                 };
  28
  29                 wps {
  30                         label = "wlan";
  31                         gpios = <&pinctrl 24 1>;
  32                         linux,code = <KEY_WLAN>;
  33                         debounce-interval = <60>;
  34                 };
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39
  40                 inet_red {
  41                         label = "A4001N1:red:inet";
  42                         gpios = <&pinctrl 2 1>;
  43                 };
  44                 ppp_green {
  45                         label = "A4001N1:green:ppp";
  46                         gpios = <&pinctrl 3 1>;
  47                 };
  48                 power_green {
  49                         label = "A4001N1:green:power";
  50                         gpios = <&pinctrl 4 1>;
  51                         default-state = "on";
  52                 };
  53                 ppp_red {
  54                         label = "A4001N1:red:ppp";
  55                         gpios = <&pinctrl 5 1>;
  56                 };
  57                 usb_green {
  58                         label = "A4001N1:green:3g";
  59                         gpios = <&pinctrl 6 1>;
  60                 };
  61                 usb_red {
  62                         label = "A4001N1:red:3g";
  63                         gpios = <&pinctrl 7 1>;
  64                 };
  65                 power_red {
  66                         label = "A4001N1:red:power";
  67                         gpios = <&pinctrl 8 1>;
  68                 };
  69                 wlan_green {
  70                         label = "A4001N1:green:wlan";
  71                         gpios = <&pinctrl 9 1>;
  72                 };
  73                 wlan_red {
  74                         label = "A4001N1:red:wlan";
  75                         gpios = <&pinctrl 10 1>;
  76                 };
  77                 inet_green {
  78                         label = "A4001N1:green:inet";
  79                         gpios = <&pinctrl 11 1>;
  80                 };
  81                 eth_red {
  82                         label = "A4001N1:red:eth";
  83                         gpios = <&pinctrl 20 1>;
  84                 };
  85                 eth_green {
  86                         label = "A4001N1:green:eth";
  87                         gpios = <&pinctrl 31 1>;
  88                 };
  89         };
  90 };
  91
  92 &hsspi {
  93         status = "ok";
  94
  95         flash@0 {
  96                 compatible = "jedec,spi-nor";
  97                 spi-max-frequency = <16666667>;
  98                 spi-tx-bus-width = <2>;
  99                 spi-rx-bus-width = <2>;
 100                 reg = <0>;
 101
 102                 #address-cells = <1>;
 103                 #size-cells = <1>;
 104
 105                 partitions {
 106                         compatible = "fixed-partitions";
 107                         #address-cells = <1>;
 108                         #size-cells = <1>;
 109
 110                         cfe@0 {
 111                                 reg = <0x000000 0x010000>;
 112                                 label = "cfe";
 113                                 read-only;
 114                         };
 115
 116                         linux@10000 {
 117                                 reg = <0x010000 0xfe0000>;
 118                                 label = "linux";
 119                                 compatible = "brcm,bcm963xx-imagetag";
 120                         };
 121
 122                         nvram@ff0000 {
 123                                 reg = <0xff0000 0x010000>;
 124                                 label = "nvram";
 125                         };
 126                 };
 127         };
 128 };
 129
 130 &uart0 {
 131         status = "ok";
 132 };