target/linux/ath79/dts/qca9563_yuncore_xd4200.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         aliases {
  10                 label-mac-device = &eth0;
  11         };
  12
  13         keys {
  14                 compatible = "gpio-keys";
  15
  16                 reset {
  17                         linux,code = <KEY_RESTART>;
  18                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  19                         debounce-interval = <60>;
  20                 };
  21         };
  22 };
  23
  24 &eth0 {
  25         status = "okay";
  26
  27         pll-data = <0x03000101 0x00000101 0x00001919>;
  28
  29         mtd-mac-address = <&art 0x0>;
  30         phy-mode = "sgmii";
  31         phy-handle = <&phy0>;
  32 };
  33
  34 &gpio {
  35         status = "okay";
  36 };
  37
  38 &mdio0 {
  39         status = "okay";
  40
  41         phy-mask = <0>;
  42
  43         phy0: ethernet-phy@0 {
  44                 reg = <0>;
  45                 phy-mode = "sgmii";
  46
  47                 qca,ar8327-initvals = <
  48                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
  49                         0x10 0x81000080 /* POWER_ON_STRIP */
  50                         0x50 0xcf37cf37 /* LED_CTRL0 */
  51                         0x54 0xcf37cf37 /* LED_CTRL1 */
  52                         0x58 0xcf37cf37 /* LED_CTRL2 */
  53                         0x5c 0x0000c300 /* LED_CTRL3 */
  54                         0x7c 0x0000007e /* PORT0_STATUS */
  55                 >;
  56         };
  57 };
  58
  59 &pcie {
  60         status = "okay";
  61
  62         wifi@0,0 {
  63                 compatible = "pci168c,0056";
  64                 reg = <0x0000 0 0 0 0>;
  65         };
  66 };
  67
  68 &spi {
  69         status = "okay";
  70
  71         num-cs = <1>;
  72
  73         flash@0 {
  74                 compatible = "jedec,spi-nor";
  75                 reg = <0>;
  76                 spi-max-frequency = <25000000>;
  77
  78                 partitions {
  79                         compatible = "fixed-partitions";
  80                         #address-cells = <1>;
  81                         #size-cells = <1>;
  82
  83                         partition@0 {
  84                                 label = "u-boot";
  85                                 reg = <0x000000 0x040000>;
  86                                 read-only;
  87                         };
  88
  89                         partition@40000 {
  90                                 label = "u-boot-env";
  91                                 reg = <0x040000 0x010000>;
  92                         };
  93
  94                         partition@50000 {
  95                                 compatible = "denx,uimage";
  96                                 label = "firmware";
  97                                 reg = <0x050000 0xfa0000>;
  98                         };
  99
 100                         art: partition@ff0000 {
 101                                 label = "art";
 102                                 reg = <0xff0000 0x010000>;
 103                                 read-only;
 104                         };
 105                 };
 106         };
 107 };
 108
 109 &uart {
 110         status = "okay";
 111 };
 112
 113 &wmac {
 114         status = "okay";
 115
 116         mtd-cal-data = <&art 0x1000>;
 117 };