target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_white;
  11                 led-failsafe = &led_white;
  12                 led-running = &led_blue;
  13                 led-upgrade = &led_blue;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200n8";
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_white: led_white {
  24                         label = "ubnt:white:dome";
  25                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  26                 };
  27
  28                 led_blue: led_blue {
  29                         label = "ubnt:blue:dome";
  30                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  31                 };
  32         };
  33
  34         keys {
  35                 compatible = "gpio-keys";
  36
  37                 reset {
  38                         label = "Reset button";
  39                         linux,code = <KEY_RESTART>;
  40                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  41                         debounce-interval = <60>;
  42                 };
  43         };
  44 };
  45
  46 &uart {
  47         status = "okay";
  48 };
  49
  50 &gpio {
  51         status = "okay";
  52 };
  53
  54 &pcie {
  55         status = "okay";
  56 };
  57
  58 &spi {
  59         status = "okay";
  60         num-cs = <1>;
  61
  62         flash@0 {
  63                 compatible = "jedec,spi-nor";
  64                 reg = <0>;
  65                 spi-max-frequency = <25000000>;
  66
  67                 partitions {
  68                         compatible = "fixed-partitions";
  69                         #address-cells = <1>;
  70                         #size-cells = <1>;
  71
  72                         partition@0 {
  73                                 label = "u-boot";
  74                                 reg = <0x000000 0x060000>;
  75                                 read-only;
  76                         };
  77
  78                         partition@60000 {
  79                                 label = "u-boot-env";
  80                                 reg = <0x060000 0x010000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@70000 {
  85                                 label = "firmware";
  86                                 reg = <0x070000 0x790000>;
  87                                 compatible = "denx,uimage";
  88                         };
  89
  90                         partition@800000 {
  91                                 label = "ubnt-airos";
  92                                 reg = <0x800000 0x790000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@f90000 {
  97                                 label = "bs";
  98                                 reg = <0xf90000 0x020000>;
  99                         };
 100
 101                         partition@fb0000 {
 102                                 label = "cfg";
 103                                 reg = <0xfb0000 0x040000>;
 104                                 read-only;
 105                         };
 106
 107                         art: partition@ff0000 {
 108                                 label = "art";
 109                                 reg = <0xff0000 0x010000>;
 110                                 read-only;
 111                         };
 112                 };
 113         };
 114 };
 115
 116 &wmac {
 117         status = "okay";
 118
 119         mtd-cal-data = <&art 0x1000>;
 120 };