target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 led_system: system {
  25                         label = "tp-link:green:system";
  26                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  27                         default-state = "on";
  28                 };
  29
  30                 usb {
  31                         label = "tp-link:green:usb";
  32                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  33                         trigger-sources = <&hub_port0>;
  34                         linux,default-trigger = "usbport";
  35                 };
  36
  37                 wlan5g {
  38                         label = "tp-link:green:wlan5g";
  39                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "phy0tpt";
  41                 };
  42
  43                 wlan2g {
  44                         label = "tp-link:green:wlan2g";
  45                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  46                         linux,default-trigger = "phy1tpt";
  47                 };
  48
  49                 wan {
  50                         label = "tp-link:green:wan";
  51                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 wan_fail {
  55                         label = "tp-link:orange:wan";
  56                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 lan1 {
  60                         label = "tp-link:green:lan1";
  61                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 lan2 {
  65                         label = "tp-link:green:lan2";
  66                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 lan3 {
  70                         label = "tp-link:green:lan3";
  71                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 lan4 {
  75                         label = "tp-link:green:lan4";
  76                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  77                 };
  78
  79                 wps {
  80                         label = "tp-link:green:wps";
  81                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  82                 };
  83         };
  84
  85         keys: keys {
  86                 compatible = "gpio-keys";
  87
  88                 wps {
  89                         label = "WPS button";
  90                         linux,code = <KEY_WPS_BUTTON>;
  91                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  92                         debounce-interval = <60>;
  93                 };
  94         };
  95
  96         gpio-export {
  97                 compatible = "gpio-export";
  98
  99                 gpio_usb_power {
 100                         gpio-export,name = "tp-link:power:usb";
 101                         gpio-export,output = <1>;
 102                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 103                 };
 104         };
 105 };
 106
 107 &pcie {
 108         status = "okay";
 109 };
 110
 111 &uart {
 112         status = "okay";
 113 };
 114
 115 &gpio {
 116         status = "okay";
 117 };
 118
 119 &usb_phy0 {
 120         status = "okay";
 121 };
 122
 123 &usb0 {
 124         #address-cells = <1>;
 125         #size-cells = <0>;
 126         status = "okay";
 127
 128         hub_port0: port@1 {
 129                 reg = <1>;
 130                 #trigger-source-cells = <0>;
 131         };
 132 };
 133
 134 &spi {
 135         status = "okay";
 136
 137         num-cs = <1>;
 138
 139         flash@0 {
 140                 compatible = "jedec,spi-nor";
 141                 reg = <0>;
 142                 spi-max-frequency = <25000000>;
 143
 144                 mtdparts: partitions {
 145                         compatible = "fixed-partitions";
 146                         #address-cells = <1>;
 147                         #size-cells = <1>;
 148                 };
 149         };
 150 };
 151
 152 &mdio0 {
 153         status = "okay";
 154
 155         phy-mask = <0>;
 156
 157         phy0: ethernet-phy@0 {
 158                 reg = <0>;
 159                 phy-mode = "sgmii";
 160                 qca,mib-poll-interval = <500>;
 161
 162                 qca,ar8327-initvals = <
 163                         0x04 0x80080080 /* PORT0 PAD MODE CTRL */
 164                         0x08 0x00000000 /* PORT5 PAD MODE CTRL */
 165                         0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
 166                         0x10 0x00000080 /* POWER_ON_STRIP */
 167                         0x7c 0x0000007e /* PORT0_STATUS */
 168                         0x94 0x00000200 /* PORT6_STATUS */
 169                         >;
 170         };
 171 };
 172
 173 &eth0 {
 174         status = "okay";
 175
 176         pll-data = <0x03000101 0x00000101 0x00001919>;
 177
 178         phy-mode = "sgmii";
 179         mtd-mac-address = <&info 0x8>;
 180         phy-handle = <&phy0>;
 181 };
 182
 183 &wmac {
 184         status = "okay";
 185
 186         mtd-cal-data = <&art 0x1000>;
 187         mtd-mac-address = <&info 0x8>;
 188 };