target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "tplink,archer-c7-v4", "qca,qca9563";
  11         model = "TP-Link Archer C7 v4";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_system;
  19                 led-failsafe = &led_system;
  20                 led-running = &led_system;
  21                 led-upgrade = &led_system;
  22                 label-mac-device = &eth0;
  23         };
  24
  25         led_spi {
  26                 compatible = "spi-gpio";
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29
  30                 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;        // 74HC595 SRCLK (Serial Clock)
  31                 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;       // 74HC595 SER (Serial)
  32                 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;         // 74HC595 RCLK (Register Clock)
  33                 num-chipselects = <1>;
  34
  35                 led_gpio: led_gpio@0 {
  36                         compatible = "fairchild,74hc595";
  37                         reg = <0>;
  38                         gpio-controller;
  39                         #gpio-cells = <2>;
  40                         registers-number = <1>;
  41                         spi-max-frequency = <10000000>;
  42                 };
  43         };
  44
  45         gpio-export {
  46                 compatible = "gpio-export";
  47
  48                 gpio_shift_register_oe {
  49                         gpio-export,name = "tp-link:oe:sr";
  50                         gpio-export,output = <0>;
  51                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;      // 74HC595 /OE (Output Enable)
  52                 };
  53
  54                 gpio_shift_register_reset {
  55                         gpio-export,name = "tp-link:reset:sr";
  56                         gpio-export,output = <1>;
  57                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;     // 74HC595 /SRCLR (Serial Clear)
  58                 };
  59         };
  60
  61         leds {
  62                 compatible = "gpio-leds";
  63
  64                 led_system: system {
  65                         label = "tp-link:green:system";
  66                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  67                         default-state = "on";
  68                 };
  69
  70                 usb1 {
  71                         label = "tp-link:green:usb1";
  72                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  73                         trigger-sources = <&hub_port1>;
  74                         linux,default-trigger = "usbport";
  75                 };
  76
  77                 usb2 {
  78                         label = "tp-link:green:usb2";
  79                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  80                         trigger-sources = <&hub_port0>;
  81                         linux,default-trigger = "usbport";
  82                 };
  83
  84                 wlan5g {
  85                         label = "tp-link:green:wlan5g";
  86                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  87                         linux,default-trigger = "phy0tpt";
  88                 };
  89
  90                 wlan2g {
  91                         label = "tp-link:green:wlan2g";
  92                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  93                         linux,default-trigger = "phy1tpt";
  94                 };
  95
  96                 wan {
  97                         label = "tp-link:green:wan";
  98                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  99                 };
 100
 101                 wan_fail {
 102                         label = "tp-link:orange:wan";
 103                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
 104                 };
 105
 106                 lan1 {
 107                         label = "tp-link:green:lan1";
 108                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
 109                 };
 110
 111                 lan2 {
 112                         label = "tp-link:green:lan2";
 113                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
 114                 };
 115
 116                 lan3 {
 117                         label = "tp-link:green:lan3";
 118                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
 119                 };
 120
 121                 lan4 {
 122                         label = "tp-link:green:lan4";
 123                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
 124                 };
 125
 126                 wps {
 127                         label = "tp-link:green:wps";
 128                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
 129                 };
 130         };
 131
 132         keys {
 133                 compatible = "gpio-keys";
 134
 135                 reset {
 136                         label = "Reset button";
 137                         linux,code = <KEY_RESTART>;
 138                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 139                         debounce-interval = <60>;
 140                 };
 141
 142                 wps {
 143                         label = "WPS button";
 144                         linux,code = <KEY_WPS_BUTTON>;
 145                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 146                         debounce-interval = <60>;
 147                 };
 148         };
 149 };
 150
 151 &pcie {
 152         status = "okay";
 153 };
 154
 155 &uart {
 156         status = "okay";
 157 };
 158
 159 &gpio {
 160         status = "okay";
 161 };
 162
 163 &usb_phy0 {
 164         status = "okay";
 165 };
 166
 167 &usb0 {
 168         #address-cells = <1>;
 169         #size-cells = <0>;
 170         status = "okay";
 171
 172         hub_port0: port@1 {
 173                 reg = <1>;
 174                 #trigger-source-cells = <0>;
 175         };
 176 };
 177
 178 &usb_phy1 {
 179         status = "okay";
 180 };
 181
 182 &usb1 {
 183         #address-cells = <1>;
 184         #size-cells = <0>;
 185         status = "okay";
 186
 187         hub_port1: port@1 {
 188                 reg = <1>;
 189                 #trigger-source-cells = <0>;
 190         };
 191 };
 192
 193 &spi {
 194         status = "okay";
 195
 196         num-cs = <1>;
 197
 198         flash@0 {
 199                 compatible = "jedec,spi-nor";
 200                 reg = <0>;
 201                 spi-max-frequency = <25000000>;
 202
 203                 partitions {
 204                         compatible = "fixed-partitions";
 205                         #address-cells = <1>;
 206                         #size-cells = <1>;
 207
 208                         partition@0 {
 209                                 label = "factory-uboot";
 210                                 reg = <0x000000 0x020000>;
 211                                 read-only;
 212                         };
 213
 214                         partition@20000 {
 215                                 label = "u-boot";
 216                                 reg = <0x020000 0x020000>;
 217                                 read-only;
 218                         };
 219
 220                         partition@40000 {
 221                                 label = "firmware";
 222                                 reg = <0x040000 0xec0000>;
 223                                 compatible = "denx,uimage";
 224                         };
 225
 226                         info: partition@f00000 {
 227                                 label = "info";
 228                                 reg = <0xf00000 0x0f0000>;
 229                                 read-only;
 230                         };
 231
 232                         art: partition@ff0000 {
 233                                 label = "art";
 234                                 reg = <0xff0000 0x010000>;
 235                                 read-only;
 236                         };
 237                 };
 238         };
 239 };
 240
 241 &mdio0 {
 242         status = "okay";
 243
 244         phy-mask = <0>;
 245
 246         phy0: ethernet-phy@0 {
 247                 reg = <0>;
 248                 phy-mode = "sgmii";
 249                 qca,mib-poll-interval = <500>;
 250
 251                 qca,ar8327-initvals = <
 252                         0x04 0x80080080 /* PORT0 PAD MODE CTRL */
 253                         0x7c 0x0000007e /* PORT0_STATUS */
 254                         0x94 0x00000200 /* PORT6_STATUS */
 255                         >;
 256         };
 257 };
 258
 259 &eth0 {
 260         status = "okay";
 261
 262         pll-data = <0x03000101 0x00000101 0x00001919>;
 263
 264         phy-mode = "sgmii";
 265         mtd-mac-address = <&info 0x8>;
 266         phy-handle = <&phy0>;
 267 };
 268
 269 &wmac {
 270         status = "okay";
 271
 272         mtd-cal-data = <&art 0x1000>;
 273         mtd-mac-address = <&info 0x8>;
 274 };