target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "tplink,archer-c7-v4", "qca,qca9563";
  11         model = "TP-Link Archer C7 v4";
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         led_spi {
  22                 compatible = "spi-gpio";
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25
  26                 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;        // 74HC595 SRCLK (Serial Clock)
  27                 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;       // 74HC595 SER (Serial)
  28                 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;         // 74HC595 RCLK (Register Clock)
  29                 num-chipselects = <1>;
  30
  31                 led_gpio: led_gpio@0 {
  32                         compatible = "fairchild,74hc595";
  33                         reg = <0>;
  34                         gpio-controller;
  35                         #gpio-cells = <2>;
  36                         registers-number = <1>;
  37                         spi-max-frequency = <10000000>;
  38                 };
  39         };
  40
  41         gpio-export {
  42                 compatible = "gpio-export";
  43
  44                 gpio_shift_register_oe {
  45                         gpio-export,name = "tp-link:oe:sr";
  46                         gpio-export,output = <0>;
  47                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;      // 74HC595 /OE (Output Enable)
  48                 };
  49
  50                 gpio_shift_register_reset {
  51                         gpio-export,name = "tp-link:reset:sr";
  52                         gpio-export,output = <1>;
  53                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;     // 74HC595 /SRCLR (Serial Clear)
  54                 };
  55         };
  56
  57         leds {
  58                 compatible = "gpio-leds";
  59
  60                 led_system: system {
  61                         label = "tp-link:green:system";
  62                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  63                         default-state = "on";
  64                 };
  65
  66                 usb1 {
  67                         label = "tp-link:green:usb1";
  68                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  69                         trigger-sources = <&hub_port1>;
  70                         linux,default-trigger = "usbport";
  71                 };
  72
  73                 usb2 {
  74                         label = "tp-link:green:usb2";
  75                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  76                         trigger-sources = <&hub_port0>;
  77                         linux,default-trigger = "usbport";
  78                 };
  79
  80                 wlan5g {
  81                         label = "tp-link:green:wlan5g";
  82                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  83                         linux,default-trigger = "phy0tpt";
  84                 };
  85
  86                 wlan2g {
  87                         label = "tp-link:green:wlan2g";
  88                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  89                         linux,default-trigger = "phy1tpt";
  90                 };
  91
  92                 wan {
  93                         label = "tp-link:green:wan";
  94                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  95                 };
  96
  97                 wan_fail {
  98                         label = "tp-link:orange:wan";
  99                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
 100                 };
 101
 102                 lan1 {
 103                         label = "tp-link:green:lan1";
 104                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
 105                 };
 106
 107                 lan2 {
 108                         label = "tp-link:green:lan2";
 109                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
 110                 };
 111
 112                 lan3 {
 113                         label = "tp-link:green:lan3";
 114                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
 115                 };
 116
 117                 lan4 {
 118                         label = "tp-link:green:lan4";
 119                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
 120                 };
 121
 122                 wps {
 123                         label = "tp-link:green:wps";
 124                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
 125                 };
 126         };
 127
 128         keys {
 129                 compatible = "gpio-keys";
 130
 131                 reset {
 132                         label = "Reset button";
 133                         linux,code = <KEY_RESTART>;
 134                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 135                         debounce-interval = <60>;
 136                 };
 137
 138                 wps {
 139                         label = "WPS button";
 140                         linux,code = <KEY_WPS_BUTTON>;
 141                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 142                         debounce-interval = <60>;
 143                 };
 144         };
 145 };
 146
 147 &pcie {
 148         status = "okay";
 149 };
 150
 151 &uart {
 152         status = "okay";
 153 };
 154
 155 &gpio {
 156         status = "okay";
 157 };
 158
 159 &usb_phy0 {
 160         status = "okay";
 161 };
 162
 163 &usb0 {
 164         #address-cells = <1>;
 165         #size-cells = <0>;
 166         status = "okay";
 167
 168         hub_port0: port@1 {
 169                 reg = <1>;
 170                 #trigger-source-cells = <0>;
 171         };
 172 };
 173
 174 &usb_phy1 {
 175         status = "okay";
 176 };
 177
 178 &usb1 {
 179         #address-cells = <1>;
 180         #size-cells = <0>;
 181         status = "okay";
 182
 183         hub_port1: port@1 {
 184                 reg = <1>;
 185                 #trigger-source-cells = <0>;
 186         };
 187 };
 188
 189 &spi {
 190         status = "okay";
 191
 192         num-cs = <1>;
 193
 194         flash@0 {
 195                 compatible = "jedec,spi-nor";
 196                 reg = <0>;
 197                 spi-max-frequency = <25000000>;
 198
 199                 partitions {
 200                         compatible = "fixed-partitions";
 201                         #address-cells = <1>;
 202                         #size-cells = <1>;
 203
 204                         partition@0 {
 205                                 label = "factory-uboot";
 206                                 reg = <0x000000 0x020000>;
 207                                 read-only;
 208                         };
 209
 210                         partition@20000 {
 211                                 label = "u-boot";
 212                                 reg = <0x020000 0x020000>;
 213                                 read-only;
 214                         };
 215
 216                         partition@40000 {
 217                                 label = "firmware";
 218                                 reg = <0x040000 0xec0000>;
 219                                 compatible = "denx,uimage";
 220                         };
 221
 222                         info: partition@f00000 {
 223                                 label = "info";
 224                                 reg = <0xf00000 0x0f0000>;
 225                                 read-only;
 226                         };
 227
 228                         art: partition@ff0000 {
 229                                 label = "art";
 230                                 reg = <0xff0000 0x010000>;
 231                                 read-only;
 232                         };
 233                 };
 234         };
 235 };
 236
 237 &mdio0 {
 238         status = "okay";
 239
 240         phy-mask = <0>;
 241
 242         phy0: ethernet-phy@0 {
 243                 reg = <0>;
 244                 phy-mode = "sgmii";
 245                 qca,mib-poll-interval = <500>;
 246
 247                 qca,ar8327-initvals = <
 248                         0x04 0x80080080 /* PORT0 PAD MODE CTRL */
 249                         0x7c 0x0000007e /* PORT0_STATUS */
 250                         0x94 0x00000200 /* PORT6_STATUS */
 251                         >;
 252         };
 253 };
 254
 255 &eth0 {
 256         status = "okay";
 257
 258         pll-data = <0x03000101 0x00000101 0x00001919>;
 259
 260         phy-mode = "sgmii";
 261         mtd-mac-address = <&info 0x8>;
 262         phy-handle = <&phy0>;
 263 };
 264
 265 &wmac {
 266         status = "okay";
 267
 268         mtd-cal-data = <&art 0x1000>;
 269         mtd-mac-address = <&info 0x8>;
 270 };