target/linux/ath79/dts/qca9563_netgear_wndr.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 led-boot = &led_power_amber;
  15                 led-failsafe = &led_power_amber;
  16                 led-running = &led_power_green;
  17                 led-upgrade = &led_power_amber;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys";
  23
  24                 wps {
  25                         label = "wps";
  26                         linux,code = <KEY_WPS_BUTTON>;
  27                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 reset {
  31                         label = "reset";
  32                         linux,code = <KEY_RESTART>;
  33                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  34                 };
  35         };
  36
  37         ath9k-keys {
  38                 compatible = "gpio-keys-polled";
  39                 poll-interval = <20>;
  40
  41                 rfkill {
  42                         label = "rfkill";
  43                         linux,code = <KEY_RFKILL>;
  44                         gpios = <&ath9k 9 GPIO_ACTIVE_LOW>;
  45                         debounce-interval = <60>;
  46                 };
  47         };
  48
  49         leds: leds {
  50                 compatible = "gpio-leds";
  51
  52                 pinctrl-names = "default";
  53                 pinctrl-0 = <&jtag_disable_pins>;
  54
  55                 led_power_green: power_green {
  56                         label = "netgear:green:power";
  57                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 led_power_amber: power_amber {
  61                         label = "netgear:amber:power";
  62                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  63                         default-state = "keep";
  64                 };
  65
  66                 wan_green {
  67                         label = "netgear:green:wan";
  68                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 wan_amber {
  72                         label = "netgear:amber:wan";
  73                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 wlan2g_green {
  77                         label = "netgear:green:wlan2g";
  78                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  79                         linux,default-trigger = "phy0tpt";
  80                 };
  81
  82                 wps_green {
  83                         label = "netgear:green:wps";
  84                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  85                 };
  86         };
  87
  88         ath9k-leds {
  89                 compatible = "gpio-leds";
  90
  91                 wlan5g_blue {
  92                         label = "netgear:blue:wlan5g";
  93                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
  94                         linux,default-trigger = "phy1tpt";
  95                 };
  96         };
  97 };
  98
  99 &spi {
 100         status = "okay";
 101
 102         num-cs = <2>;
 103         cs-gpios = <0>, <0>;
 104
 105         flash@0 {
 106                 compatible = "jedec,spi-nor";
 107                 reg = <0>;
 108                 spi-max-frequency = <25000000>;
 109
 110                 partitions {
 111                         compatible = "fixed-partitions";
 112                         #address-cells = <1>;
 113                         #size-cells = <1>;
 114
 115                         partition@0 {
 116                                 label = "u-boot";
 117                                 reg = <0x0 0x40000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@40000 {
 122                                 label = "u-boot-env";
 123                                 reg = <0x40000 0x10000>;
 124                         };
 125
 126                         partition@50000 {
 127                                 label = "caldata_backup";
 128                                 reg = <0x50000 0x10000>;
 129                                 read-only;
 130                         };
 131
 132                         partition@60000 {
 133                                 label = "config";
 134                                 reg = <0x60000 0x10000>;
 135                         };
 136
 137                         partition@70000 {
 138                                 label = "traffic_meter";
 139                                 reg = <0x70000 0x10000>;
 140                         };
 141
 142                         partition@80000 {
 143                                 label = "pot";
 144                                 reg = <0x80000 0x10000>;
 145                         };
 146
 147                         partition@90000 {
 148                                 label = "reserved";
 149                                 reg = <0x90000 0x160000>;
 150                         };
 151
 152                         caldata: partition@1f0000 {
 153                                 label = "caldata";
 154                                 reg = <0x1f0000 0x10000>;
 155                                 read-only;
 156                         };
 157                 };
 158         };
 159
 160         flash@1 {
 161                 compatible = "spi-nand";
 162                 reg = <1>;
 163                 spi-max-frequency = <25000000>;
 164
 165                 partitions {
 166                         compatible = "fixed-partitions";
 167                         #address-cells = <1>;
 168                         #size-cells = <1>;
 169
 170                         partition@0 {
 171                                 label = "kernel";
 172                                 reg = <0x0 0x400000>;
 173                         };
 174
 175                         partition@400000 {
 176                                 label = "ubi";
 177                                 reg = <0x400000 0x7c00000>;
 178                         };
 179                 };
 180         };
 181 };
 182
 183 &mdio0 {
 184         status = "okay";
 185
 186         phy-mask = <0>;
 187
 188         phy0: ethernet-phy@0 {
 189                 reg = <0>;
 190                 phy-mode = "sgmii";
 191                 qca,mib-poll-interval = <500>;
 192
 193                 qca,ar8327-initvals = <
 194                         0x04 0x00000080 /* PORT0 PAD MODE CTRL */
 195                         0x10 0x81000080 /* POWER_ON_STRIP */
 196                         0x50 0xcc35cc35 /* LED_CTRL0 */
 197                         0x54 0xcb37cb37 /* LED_CTRL1 */
 198                         0x58 0x00000000 /* LED_CTRL2 */
 199                         0x5c 0x00f3cf00 /* LED_CTRL3 */
 200                         0x7c 0x0000007e /* PORT0_STATUS */
 201                         0x94 0x00000200 /* PORT6_STATUS */
 202                         >;
 203         };
 204 };
 205
 206 &eth0 {
 207         status = "okay";
 208
 209         pll-data = <0x03000101 0x00000101 0x00001919>;
 210
 211         mtd-mac-address = <&caldata 0x0>;
 212
 213         phy-mode = "sgmii";
 214         phy-handle = <&phy0>;
 215 };
 216
 217 &wmac {
 218         status = "okay";
 219
 220         mtd-mac-address = <&caldata 0x0>;
 221         qca,no-eeprom;
 222 };
 223
 224 &pcie {
 225         status = "okay";
 226
 227         ath9k: wifi@0,0 {
 228                 /* chip is AR9580, override bogus PCI ID 168c:abcd */
 229                 compatible = "pci168c,0033";
 230                 reg = <0x0000 0 0 0 0>;
 231                 mtd-mac-address = <&caldata 0xc>;
 232                 qca,no-eeprom;
 233                 qca,gpio-mask=<0xf6ff>; /* unmask pin 9 for RFKILL button */
 234                 #gpio-cells = <2>;
 235                 gpio-controller;
 236         };
 237 };
 238
 239 &usb_phy0 {
 240         status = "okay";
 241 };
 242
 243 &usb0 {
 244         #address-cells = <1>;
 245         #size-cells = <0>;
 246         status = "okay";
 247
 248         hub_port0: port@1 {
 249                 reg = <1>;
 250                 #trigger-source-cells = <0>;
 251         };
 252 };
 253
 254 &uart {
 255         status = "okay";
 256 };