target/linux/ath79/dts/qca9563_nec_wg1200cr.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         model = "NEC Aterm WG1200CR";
  11         compatible = "nec,wg1200cr", "qca,qca9563";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_power_green;
  19                 led-failsafe = &led_power_red;
  20                 led-running = &led_power_green;
  21                 led-upgrade = &led_power_green;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26                 /* other LEDs are connected to ath10k (QCA9888) gpiochip */
  27
  28                 led_power_green: power_green {
  29                         label = "wg1200cr:green:power";
  30                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  31                         default-state = "on";
  32                 };
  33
  34                 led_power_red: power_red {
  35                         label = "wg1200cr:red:power";
  36                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 reset {
  44                         label = "reset";
  45                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_RESTART>;
  47                         debounce-interval = <60>;
  48                 };
  49
  50                 wps {
  51                         label = "wps";
  52                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  53                         linux,code = <KEY_WPS_BUTTON>;
  54                         debounce-interval = <60>;
  55                 };
  56
  57                 bridge {
  58                         label = "br";
  59                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  60                         linux,code = <BTN_0>;
  61                         linux,input-type = <EV_SW>;
  62                         debounce-interval = <60>;
  63                 };
  64
  65                 converter {
  66                         label = "cnv";
  67                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  68                         linux,code = <BTN_0>;
  69                         linux,input-type = <EV_SW>;
  70                         debounce-interval = <60>;
  71                 };
  72         };
  73 };
  74
  75 &spi {
  76         status = "okay";
  77
  78         num-cs = <1>;
  79
  80         flash@0 {
  81                 compatible = "jedec,spi-nor";
  82                 reg = <0>;
  83                 spi-max-frequency = <25000000>;
  84
  85                 partitions {
  86                         compatible = "fixed-partitions";
  87                         #address-cells = <1>;
  88                         #size-cells = <1>;
  89
  90                         partition@0 {
  91                                 label = "u-boot";
  92                                 reg = <0x000000 0x040000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@40000 {
  97                                 label = "devdata";
  98                                 reg = <0x040000 0x010000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@50000 {
 103                                 label = "devconf";
 104                                 reg = <0x050000 0x010000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@60000 {
 109                                 label = "misc";
 110                                 reg = <0x060000 0x010000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@70000 {
 115                                 label = "wifimngdata";
 116                                 reg = <0x070000 0x010000>;
 117                                 read-only;
 118                         };
 119
 120                         partition@80000 {
 121                                 compatible = "seama";
 122                                 label = "firmware";
 123                                 reg = <0x080000 0x770000>;
 124                         };
 125
 126                         partition@7f0000 {
 127                                 label = "art";
 128                                 reg = <0x7f0000 0x010000>;
 129                                 read-only;
 130                         };
 131                 };
 132         };
 133 };
 134
 135 &mdio0 {
 136         status = "okay";
 137
 138         phy0: ethernet-phy@0 {
 139                 reg = <0>;
 140
 141                 qca,ar8327-initvals = <
 142                         0x04 0x00000080 /* PORT0 PAD MODE CTRL */
 143                         0x50 0xcc35cc35 /* LED_CTRL0 */
 144                         0x54 0xca35ca35 /* LED_CTRL1 */
 145                         0x58 0xc935c935 /* LED_CTRL2 */
 146                         0x5c 0x03ffff00 /* LED_CTRL3 */
 147                         0x7c 0x0000007e /* PORT0_STATUS */
 148                 >;
 149         };
 150 };
 151
 152 &eth0 {
 153         status = "okay";
 154
 155         pll-data = <0x03000101 0x00000101 0x00001919>;
 156
 157         phy-mode = "sgmii";
 158         phy-handle = <&phy0>;
 159 };
 160
 161 &pcie {
 162         status = "okay";
 163
 164         wifi@0,0 {
 165                 compatible = "pci168c,0056";
 166                 reg = <0x0000 0 0 0 0>;
 167         };
 168 };
 169
 170 &uart {
 171         status = "okay";
 172 };
 173
 174 &wmac {
 175         status = "okay";
 176
 177         qca,no-eeprom;
 178 };