target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         compatible = "tplink,archer-c5x", "qca,qca9560";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16                 label-mac-device = &eth1;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200n8";
  21         };
  22
  23         led_spi {
  24                 compatible = "spi-gpio";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27
  28                 sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
  29                 mosi-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  30                 cs-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  31                 num-chipselects = <1>;
  32
  33                 led_gpio: led_gpio@0 {
  34                         compatible = "fairchild,74hc595";
  35                         reg = <0>;
  36                         gpio-controller;
  37                         #gpio-cells = <2>;
  38                         registers-number = <1>;
  39                         spi-max-frequency = <10000000>;
  40                 };
  41         };
  42
  43         leds: leds {
  44                 compatible = "gpio-leds";
  45
  46                 led_power: power {
  47                         label = "tp-link:green:power";
  48                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  49                         default-state = "on";
  50                 };
  51
  52                 wlan2g {
  53                         label = "tp-link:green:wlan2g";
  54                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy1tpt";
  56                 };
  57
  58                 wlan5g {
  59                         label = "tp-link:green:wlan5g";
  60                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
  61                         linux,default-trigger = "phy0tpt";
  62                 };
  63
  64                 wan_green {
  65                         label = "tp-link:green:wan";
  66                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 wan_amber {
  70                         label = "tp-link:amber:wan";
  71                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 lan {
  75                         label = "tp-link:green:lan";
  76                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
  77                 };
  78
  79                 wps {
  80                         label = "tp-link:green:wps";
  81                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  82                 };
  83         };
  84
  85         keys {
  86                 compatible = "gpio-keys";
  87
  88                 wps {
  89                         label = "WPS button";
  90                         linux,code = <KEY_WPS_BUTTON>;
  91                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  92                 };
  93
  94                 wifi {
  95                         label = "WiFi button";
  96                         linux,code = <KEY_RFKILL>;
  97                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  98                 };
  99
 100                 reset {
 101                         label = "Reset button";
 102                         linux,code = <KEY_RESTART>;
 103                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
 104                 };
 105         };
 106
 107         gpio-export {
 108                 compatible = "gpio-export";
 109
 110                 gpio_shift_register_oe {
 111                         gpio-export,name = "tp-link:oe:sr";
 112                         gpio-export,output = <0>;
 113                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
 114                 };
 115
 116                 gpio_shift_register_reset {
 117                         gpio-export,name = "tp-link:reset:sr";
 118                         gpio-export,output = <1>;
 119                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 120                 };
 121         };
 122 };
 123
 124 &uart {
 125         status = "okay";
 126 };
 127
 128 &gpio {
 129         status = "okay";
 130 };
 131
 132 &pcie {
 133         status = "okay";
 134 };
 135
 136 &eth0 {
 137         status = "okay";
 138
 139         phy-handle = <&swphy0>;
 140
 141         mtd-mac-address = <&mac 0x8>;
 142         mtd-mac-address-increment = <1>;
 143
 144         gmac-config {
 145                 device = <&gmac>;
 146
 147                 switch-phy-addr-swap = <1>;
 148                 switch-phy-swap = <1>;
 149         };
 150 };
 151
 152 &eth1 {
 153         status = "okay";
 154
 155         mtd-mac-address = <&mac 0x8>;
 156 };
 157
 158 &wmac {
 159         status = "okay";
 160
 161         mtd-cal-data = <&art 0x1000>;
 162         mtd-mac-address = <&mac 0x8>;
 163 };