target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "tplink,archer-c25-v1", "qca,qca9561";
  11         model = "TP-Link Archer C25 v1";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         led_spi {
  18                 compatible = "spi-gpio";
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21
  22                 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  23                 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
  24                 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  25                 num-chipselects = <1>;
  26
  27                 led_gpio: led_gpio@0 {
  28                         compatible = "fairchild,74hc595";
  29                         reg = <0>;
  30                         gpio-controller;
  31                         #gpio-cells = <2>;
  32                         registers-number = <1>;
  33                         spi-max-frequency = <10000000>;
  34                 };
  35         };
  36
  37         keys {
  38                 compatible = "gpio-keys";
  39
  40                 wifi_button {
  41                         label = "WiFi button";
  42                         linux,code = <KEY_RFKILL>;
  43                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 reset_button {
  47                         label = "Reset button";
  48                         linux,code = <KEY_RESTART>;
  49                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  50                 };
  51         };
  52
  53         aliases {
  54                 led-boot = &power;
  55                 led-failsafe = &power;
  56                 led-running = &power;
  57                 led-upgrade = &power;
  58                 label-mac-device = &eth0;
  59         };
  60
  61         leds {
  62                 compatible = "gpio-leds";
  63
  64                 power: power {
  65                         label = "tp-link:green:power";
  66                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  67                         default-state = "on";
  68                 };
  69
  70                 wps {
  71                         label = "tp-link:green:wps";
  72                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 wlan2g {
  76                         label = "tp-link:green:wlan2g";
  77                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  78                         linux,default-trigger = "phy1tpt";
  79                 };
  80
  81                 wlan5g {
  82                         label = "tp-link:green:wlan5g";
  83                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  84                         linux,default-trigger = "phy0tpt";
  85                 };
  86
  87                 wan_green {
  88                         label = "tp-link:green:wan";
  89                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  90                 };
  91
  92                 wan_amber {
  93                         label = "tp-link:amber:wan";
  94                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
  95                 };
  96
  97                 lan1 {
  98                         label = "tp-link:green:lan1";
  99                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
 100                 };
 101
 102                 lan2 {
 103                         label = "tp-link:green:lan2";
 104                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
 105                 };
 106
 107                 lan3 {
 108                         label = "tp-link:green:lan3";
 109                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
 110                 };
 111
 112                 lan4 {
 113                         label = "tp-link:green:lan4";
 114                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
 115                 };
 116         };
 117 };
 118
 119 &spi {
 120         status = "okay";
 121         num-cs = <1>;
 122
 123         flash@0 {
 124                 compatible = "jedec,spi-nor";
 125                 reg = <0>;
 126                 spi-max-frequency = <25000000>;
 127
 128                 partitions {
 129                         compatible = "fixed-partitions";
 130                         #address-cells = <1>;
 131                         #size-cells = <1>;
 132
 133                         partition@0 {
 134                                 label = "factory-boot";
 135                                 reg = <0x000000 0x020000>;
 136                                 read-only;
 137                         };
 138
 139                         partition@20000 {
 140                                 label = "u-boot";
 141                                 reg = <0x020000 0x010000>;
 142                                 read-only;
 143                         };
 144
 145                         partition@30000 {
 146                                 compatible = "denx,uimage";
 147                                 label = "firmware";
 148                                 reg = <0x030000 0x7a0000>;
 149                         };
 150
 151                         config: partition@7d0000 {
 152                                 label = "config";
 153                                 reg = <0x7d0000 0x010000>;
 154                                 read-only;
 155                         };
 156
 157                         info: partition@7e0000 {
 158                                 label = "info";
 159                                 reg = <0x7e0000 0x010000>;
 160                                 read-only;
 161                         };
 162
 163                         art: partition@7f0000 {
 164                                 label = "art";
 165                                 reg = <0x7f0000 0x010000>;
 166                                 read-only;
 167                         };
 168                 };
 169         };
 170 };
 171
 172 &uart {
 173         status = "okay";
 174 };
 175
 176 &pcie {
 177         status = "okay";
 178 };
 179
 180 &eth0 {
 181         phy-mode = "mii";
 182         phy-handle = <&swphy4>;
 183
 184         status = "okay";
 185         mtd-mac-address = <&info 0x8>;
 186 };
 187
 188 &eth1 {
 189         status = "okay";
 190         mtd-mac-address = <&info 0x8>;
 191         mtd-mac-address-increment = <1>;
 192 };
 193
 194 &wmac {
 195         status = "okay";
 196         mtd-cal-data = <&art 0x1000>;
 197         mtd-mac-address = <&info 0x8>;
 198 };