ath79: drop and consolidate redundant chosen/bootargs
[oweals/openwrt.git] / target / linux / ath79 / dts / qca9561_tplink_archer-c25-v1.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6
7 #include "qca956x.dtsi"
8
9 / {
10         compatible = "tplink,archer-c25-v1", "qca,qca9561";
11         model = "TP-Link Archer C25 v1";
12
13         aliases {
14                 led-boot = &led_power;
15                 led-failsafe = &led_power;
16                 led-running = &led_power;
17                 led-upgrade = &led_power;
18                 label-mac-device = &eth0;
19         };
20
21         led_spi {
22                 compatible = "spi-gpio";
23                 #address-cells = <1>;
24                 #size-cells = <0>;
25
26                 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
27                 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
28                 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
29                 num-chipselects = <1>;
30
31                 led_gpio: led_gpio@0 {
32                         compatible = "fairchild,74hc595";
33                         reg = <0>;
34                         gpio-controller;
35                         #gpio-cells = <2>;
36                         registers-number = <1>;
37                         spi-max-frequency = <10000000>;
38                 };
39         };
40
41         keys {
42                 compatible = "gpio-keys";
43
44                 wifi {
45                         label = "WiFi button";
46                         linux,code = <KEY_RFKILL>;
47                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
48                 };
49
50                 reset {
51                         label = "Reset button";
52                         linux,code = <KEY_RESTART>;
53                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
54                 };
55         };
56
57         leds {
58                 compatible = "gpio-leds";
59
60                 led_power: power {
61                         label = "tp-link:green:power";
62                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
63                         default-state = "on";
64                 };
65
66                 wps {
67                         label = "tp-link:green:wps";
68                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
69                 };
70
71                 wlan2g {
72                         label = "tp-link:green:wlan2g";
73                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
74                         linux,default-trigger = "phy1tpt";
75                 };
76
77                 wlan5g {
78                         label = "tp-link:green:wlan5g";
79                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
80                         linux,default-trigger = "phy0tpt";
81                 };
82
83                 wan_green {
84                         label = "tp-link:green:wan";
85                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
86                 };
87
88                 wan_amber {
89                         label = "tp-link:amber:wan";
90                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
91                 };
92
93                 lan1 {
94                         label = "tp-link:green:lan1";
95                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
96                 };
97
98                 lan2 {
99                         label = "tp-link:green:lan2";
100                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
101                 };
102
103                 lan3 {
104                         label = "tp-link:green:lan3";
105                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
106                 };
107
108                 lan4 {
109                         label = "tp-link:green:lan4";
110                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
111                 };
112         };
113 };
114
115 &spi {
116         status = "okay";
117
118         num-cs = <1>;
119
120         flash@0 {
121                 compatible = "jedec,spi-nor";
122                 reg = <0>;
123                 spi-max-frequency = <25000000>;
124
125                 partitions {
126                         compatible = "fixed-partitions";
127                         #address-cells = <1>;
128                         #size-cells = <1>;
129
130                         partition@0 {
131                                 label = "factory-boot";
132                                 reg = <0x000000 0x020000>;
133                                 read-only;
134                         };
135
136                         partition@20000 {
137                                 label = "u-boot";
138                                 reg = <0x020000 0x010000>;
139                                 read-only;
140                         };
141
142                         partition@30000 {
143                                 compatible = "denx,uimage";
144                                 label = "firmware";
145                                 reg = <0x030000 0x7a0000>;
146                         };
147
148                         config: partition@7d0000 {
149                                 label = "config";
150                                 reg = <0x7d0000 0x010000>;
151                                 read-only;
152                         };
153
154                         info: partition@7e0000 {
155                                 label = "info";
156                                 reg = <0x7e0000 0x010000>;
157                                 read-only;
158                         };
159
160                         art: partition@7f0000 {
161                                 label = "art";
162                                 reg = <0x7f0000 0x010000>;
163                                 read-only;
164                         };
165                 };
166         };
167 };
168
169 &uart {
170         status = "okay";
171 };
172
173 &pcie {
174         status = "okay";
175 };
176
177 &eth0 {
178         status = "okay";
179
180         phy-handle = <&swphy4>;
181
182         mtd-mac-address = <&info 0x8>;
183 };
184
185 &eth1 {
186         status = "okay";
187
188         mtd-mac-address = <&info 0x8>;
189         mtd-mac-address-increment = <1>;
190 };
191
192 &wmac {
193         status = "okay";
194
195         mtd-cal-data = <&art 0x1000>;
196         mtd-mac-address = <&info 0x8>;
197 };