target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         compatible = "zyxel,nbg6716", "qca,qca9558";
  11         model = "ZyXEL NBG6716";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_power: power {
  24                         label = "nbg6716:white:power";
  25                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 internet {
  29                         label = "nbg6716:white:internet";
  30                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 usb1 {
  34                         label = "nbg6716:white:usb1";
  35                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "usbport";
  37                         trigger-sources = <&hub_port1>;
  38                 };
  39
  40                 usb2 {
  41                         label = "nbg6716:white:usb2";
  42                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  43                         linux,default-trigger = "usbport";
  44                         trigger-sources = <&hub_port0>;
  45                 };
  46
  47                 wifi2g {
  48                         label = "nbg6716:white:wifi2g";
  49                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  50                         linux,default-trigger = "phy1tpt";
  51                 };
  52
  53                 wifi5g {
  54                         label = "nbg6716:white:wifi5g";
  55                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  56                         linux,default-trigger = "phy0tpt";
  57                 };
  58
  59                 wps {
  60                         label = "nbg6716:white:wps";
  61                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  62                 };
  63         };
  64
  65         keys {
  66                 compatible = "gpio-keys";
  67
  68                 reset {
  69                         label = "reset";
  70                         linux,code = <KEY_RESTART>;
  71                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  72                         debounce-interval = <60>;
  73                 };
  74
  75                 wifi {
  76                         label = "WiFi button";
  77                         linux,code = <KEY_RFKILL>;
  78                         linux,input-type = <EV_SW>;
  79                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  80                         debounce-interval = <60>;
  81                 };
  82
  83                 usb1 {
  84                         label = "USB1 eject button";
  85                         linux,code = <BTN_1>;
  86                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  87                         debounce-interval = <60>;
  88                 };
  89
  90                 usb2 {
  91                         label = "USB2 eject button";
  92                         linux,code = <BTN_2>;
  93                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  94                         debounce-interval = <60>;
  95                 };
  96
  97                 wps {
  98                         label = "WPS button";
  99                         linux,code = <KEY_WPS_BUTTON>;
 100                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
 101                         debounce-interval = <60>;
 102                 };
 103         };
 104 };
 105
 106 &gpio {
 107         usb_power {
 108                 gpio-hog;
 109                 gpios = <16 0>;
 110                 output-high;
 111                 line-name = "nbg6716:power:usb";
 112         };
 113 };
 114
 115 &uart {
 116         status = "okay";
 117 };
 118
 119 &spi {
 120         status = "okay";
 121
 122         num-cs = <1>;
 123
 124         flash@0 {
 125                 compatible = "jedec,spi-nor";
 126                 reg = <0>;
 127                 spi-max-frequency = <25000000>;
 128
 129                 partitions {
 130                         compatible = "fixed-partitions";
 131                         #address-cells = <1>;
 132                         #size-cells = <1>;
 133
 134                         uboot: partition@0 {
 135                                 label = "u-boot";
 136                                 reg = <0x000000 0x040000>;
 137                                 read-only;
 138                         };
 139
 140                         uboot_env: partition@40000 {
 141                                 label = "u-boot-env";
 142                                 reg = <0x040000 0x010000>;
 143                         };
 144
 145                         art: partition@50000 {
 146                                 label = "art";
 147                                 reg = <0x050000 0x010000>;
 148                                 read-only;
 149                         };
 150
 151                         partition@60000 {
 152                                 label = "nbu";
 153                                 reg = <0x060000 0xfa0000>;
 154                         };
 155                 };
 156         };
 157 };
 158
 159 &nand {
 160         status = "okay";
 161
 162         partitions {
 163                 compatible = "fixed-partitions";
 164                 #address-cells = <1>;
 165                 #size-cells = <1>;
 166
 167                 partition@0 {
 168                         label = "zyxel_rfsd";
 169                         reg = <0x0 0x200000>;
 170                 };
 171
 172                 partition@200000 {
 173                         label = "romd";
 174                         reg = <0x200000 0x200000>;
 175                 };
 176
 177                 partition@400000 {
 178                         label = "header";
 179                         reg = <0x400000 0x100000>;
 180                 };
 181
 182                 firmware@500000 {
 183                         label = "firmware";
 184                         reg = <0x500000 0x7b00000>;
 185                 };
 186
 187                 partition@500000 {
 188                         label = "kernel";
 189                         reg = <0x500000 0x400000>;
 190                 };
 191
 192                 partition@900000 {
 193                         label = "ubi";
 194                         reg = <0x900000 0x7700000>;
 195                 };
 196         };
 197 };
 198
 199 &mdio0 {
 200         status = "okay";
 201
 202         phy17: ethernet-phy@11 {
 203                 reg = <0x11>;
 204                 phy-mode = "rgmii-id";
 205         };
 206
 207         switch0@1f {
 208                 compatible = "qca,ar8327";
 209                 reg = <0x1f>;
 210                 qca,ar8327-initvals = <
 211                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 212                         0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
 213                         0x10 0x81000080 /* POWER_ON_STRIP */
 214                         0x50 0xffb7ffb7 /* LED_CTRL0 */
 215                         0x54 0xffb7ffb7 /* LED_CTRL1 */
 216                         0x58 0xffb7ffb7 /* LED_CTRL2 */
 217                         0x5c 0x03ffff00 /* LED_CTRL3 */
 218                         0x7c 0x0000007e /* PORT0_STATUS */
 219                         0x94 0x0000007e /* PORT6 STATUS */
 220                         >;
 221         };
 222 };
 223
 224 &mdio1 {
 225         status = "okay";
 226
 227         phy1: ethernet-phy@1 {
 228                 reg = <1>;
 229                 phy-mode = "sgmii";
 230         };
 231 };
 232
 233
 234 &eth0 {
 235         status = "okay";
 236
 237         pll-data = <0xa6000000 0x00000101 0x00001616>;
 238         phy-handle = <&phy17>;
 239
 240         fixed-link {
 241                 speed = <1000>;
 242                 full-duplex;
 243         };
 244 };
 245
 246 &eth1 {
 247         status = "okay";
 248
 249         pll-data = <0x03000101 0x00000101 0x00001616>;
 250         phy-handle = <&phy1>;
 251
 252         fixed-link {
 253                 speed = <1000>;
 254                 full-duplex;
 255         };
 256 };
 257
 258 &gpio {
 259         status = "okay";
 260 };
 261
 262 &wmac {
 263         status = "okay";
 264
 265         mtd-cal-data = <&art 0x1000>;
 266 };
 267
 268 &pcie1 {
 269         status = "okay";
 270
 271         wifi@0,0 {
 272                 compatible = "qcom,ath10k";
 273                 reg = <0 0 0 0 0>;
 274                 qcom,ath10k-calibration-variant = "ZyXEL-NBG6716";
 275         };
 276 };
 277
 278 &usb_phy0 {
 279         status = "okay";
 280 };
 281
 282 &usb_phy1 {
 283         status = "okay";
 284 };
 285
 286 &usb0 {
 287         status = "okay";
 288
 289         hub_port0: port@1 {
 290                 reg = <1>;
 291                 #trigger-source-cells = <0>;
 292         };
 293
 294 };
 295
 296 &usb1 {
 297         status = "okay";
 298
 299         hub_port1: port@1 {
 300                 reg = <1>;
 301                 #trigger-source-cells = <0>;
 302         };
 303 };