target/linux/ath79/dts/qca9558_tplink_archer-d7.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca955x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_system;
  11                 led-failsafe = &led_system;
  12                 led-running = &led_system;
  13                 led-upgrade = &led_system;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_system: system {
  20                         label = "tp-link:white:system";
  21                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  22                         default-state = "on";
  23                 };
  24
  25                 wlan {
  26                         label = "tp-link:white:wlan";
  27                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 lan {
  31                         label = "tp-link:white:lan";
  32                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 usb {
  36                         label = "tp-link:white:usb";
  37                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  38                         trigger-sources = <&hub_port1>, <&hub_port0>;
  39                         linux,default-trigger = "usbport";
  40                 };
  41
  42                 qss {
  43                         label = "tp-link:white:qss";
  44                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  45                 };
  46         };
  47
  48         keys {
  49                 compatible = "gpio-keys";
  50
  51                 wifi {
  52                         label = "WiFi button";
  53                         linux,code = <KEY_RFKILL>;
  54                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 wps {
  58                         label = "WPS button";
  59                         linux,code = <KEY_WPS_BUTTON>;
  60                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 reset {
  64                         label = "Reset button";
  65                         linux,code = <KEY_RESTART>;
  66                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  67                 };
  68         };
  69
  70         reg_usb0_vbus: regulator {
  71                 compatible = "regulator-fixed";
  72                 regulator-name = "usb_vbus";
  73                 regulator-min-microvolt = <5000000>;
  74                 regulator-max-microvolt = <5000000>;
  75                 gpio = <&gpio 21 GPIO_ACTIVE_HIGH>;
  76                 enable-active-high;
  77         };
  78
  79         reg_usb1_vbus: regulator {
  80                 compatible = "regulator-fixed";
  81                 regulator-name = "usb_vbus";
  82                 regulator-min-microvolt = <5000000>;
  83                 regulator-max-microvolt = <5000000>;
  84                 gpio = <&gpio 22 GPIO_ACTIVE_HIGH>;
  85                 enable-active-high;
  86         };
  87 };
  88
  89 &mdio0 {
  90         status = "okay";
  91
  92         phy0: ethernet-phy@0 {
  93                 reg = <0>;
  94
  95                 qca,ar8327-initvals = <
  96                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
  97                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
  98                         0x50 0xc737c737 /* LED_CTRL0 */
  99                         0x54 0x00000000 /* LED_CTRL1 */
 100                         0x58 0x00000000 /* LED_CTRL2 */
 101                         0x5c 0x0030c300 /* LED_CTRL3 */
 102                         0x7c 0x0000007e /* PORT0_STATUS */
 103                         0x94 0x0000007e /* PORT6 STATUS */
 104                         >;
 105         };
 106 };
 107
 108 &eth0 {
 109         status = "okay";
 110
 111         phy-handle = <&phy0>;
 112         pll-data = <0x56000000 0x00000101 0x00001616>;
 113
 114         gmac-config {
 115                 device = <&gmac>;
 116                 rgmii-enabled = <1>;
 117         };
 118 };
 119
 120 &eth1 {
 121         status = "okay";
 122
 123         pll-data = <0x03000101 0x00000101 0x00001616>;
 124
 125         fixed-link {
 126                 speed = <1000>;
 127                 full-duplex;
 128         };
 129 };
 130
 131 &wmac {
 132         status = "okay";
 133 };
 134
 135 &pcie1 {
 136         status = "okay";
 137 };
 138
 139 &uart {
 140         status = "okay";
 141 };
 142
 143 &usb_phy0 {
 144         status = "okay";
 145 };
 146
 147 &usb0 {
 148         #address-cells = <1>;
 149         #size-cells = <0>;
 150         dr_mode = "host";
 151         vbus-supply = <&reg_usb0_vbus>;
 152         status = "okay";
 153
 154         hub_port0: port@1 {
 155                 reg = <1>;
 156                 #trigger-source-cells = <0>;
 157         };
 158 };
 159
 160 &usb_phy1 {
 161         status = "okay";
 162 };
 163
 164 &usb1 {
 165         #address-cells = <1>;
 166         #size-cells = <0>;
 167         dr_mode = "host";
 168         vbus-supply = <&reg_usb1_vbus>;
 169         status = "okay";
 170
 171         hub_port1: port@1 {
 172                 reg = <1>;
 173                 #trigger-source-cells = <0>;
 174         };
 175 };