target/linux/ath79/dts/qca9558_tplink_archer-c.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca955x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_system;
  11                 led-failsafe = &led_system;
  12                 led-running = &led_system;
  13                 led-upgrade = &led_system;
  14                 label-mac-device = &eth1;
  15         };
  16
  17         leds: leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_system: system {
  21                         label = "tp-link:green:system";
  22                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  23                         default-state = "on";
  24                 };
  25
  26                 usb1 {
  27                         label = "tp-link:green:usb1";
  28                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  29                         trigger-sources = <&hub_port1>;
  30                         linux,default-trigger = "usbport";
  31                 };
  32
  33                 usb2 {
  34                         label = "tp-link:green:usb2";
  35                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  36                         trigger-sources = <&hub_port0>;
  37                         linux,default-trigger = "usbport";
  38                 };
  39
  40                 wlan2g {
  41                         label = "tp-link:green:wlan2g";
  42                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  43                         linux,default-trigger = "phy1tpt";
  44                 };
  45
  46                 qss {
  47                         label = "tp-link:green:qss";
  48                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  49                 };
  50         };
  51
  52         keys: keys {
  53                 compatible = "gpio-keys";
  54
  55                 reset {
  56                         label = "Reset button";
  57                         linux,code = <KEY_RESTART>;
  58                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  59                         debounce-interval = <60>;
  60                 };
  61         };
  62
  63         gpio-export {
  64                 compatible = "gpio-export";
  65
  66                 gpio_usb1_power {
  67                         gpio-export,name = "tp-link:power:usb1";
  68                         gpio-export,output = <1>;
  69                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  70                 };
  71
  72                 gpio_usb2_power {
  73                         gpio-export,name = "tp-link:power:usb2";
  74                         gpio-export,output = <1>;
  75                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  76                 };
  77         };
  78 };
  79
  80 &pcie1 {
  81         status = "okay";
  82 };
  83
  84 &uart {
  85         status = "okay";
  86 };
  87
  88 &gpio {
  89         status = "okay";
  90 };
  91
  92 &usb_phy0 {
  93         status = "okay";
  94 };
  95
  96 &usb0 {
  97         #address-cells = <1>;
  98         #size-cells = <0>;
  99         status = "okay";
 100
 101         hub_port0: port@1 {
 102                 reg = <1>;
 103                 #trigger-source-cells = <0>;
 104         };
 105 };
 106
 107 &usb_phy1 {
 108         status = "okay";
 109 };
 110
 111 &usb1 {
 112         #address-cells = <1>;
 113         #size-cells = <0>;
 114         status = "okay";
 115
 116         hub_port1: port@1 {
 117                 reg = <1>;
 118                 #trigger-source-cells = <0>;
 119         };
 120 };
 121
 122 &spi {
 123         status = "okay";
 124
 125         num-cs = <1>;
 126
 127         flash@0 {
 128                 compatible = "jedec,spi-nor";
 129                 reg = <0>;
 130                 spi-max-frequency = <25000000>;
 131
 132                 mtdparts: partitions {
 133                         compatible = "fixed-partitions";
 134                         #address-cells = <1>;
 135                         #size-cells = <1>;
 136                 };
 137         };
 138 };
 139
 140 &mdio0 {
 141         status = "okay";
 142
 143         phy0: ethernet-phy@0 {
 144                 reg = <0>;
 145
 146                 qca,ar8327-initvals = <
 147                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 148                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 149                         0x50 0xc737c737 /* LED_CTRL0 */
 150                         0x54 0x00000000 /* LED_CTRL1 */
 151                         0x58 0x00000000 /* LED_CTRL2 */
 152                         0x5c 0x0030c300 /* LED_CTRL3 */
 153                         0x7c 0x0000007e /* PORT0_STATUS */
 154                         0x94 0x0000007e /* PORT6 STATUS */
 155                         >;
 156         };
 157 };
 158
 159 &eth0 {
 160         status = "okay";
 161
 162         mtd-mac-address = <&uboot 0x1fc00>;
 163         mtd-mac-address-increment = <1>;
 164         phy-handle = <&phy0>;
 165         pll-data = <0x56000000 0x00000101 0x00001616>;
 166
 167         gmac-config {
 168                 device = <&gmac>;
 169                 rgmii-enabled = <1>;
 170         };
 171 };
 172
 173 &eth1 {
 174         status = "okay";
 175
 176         mtd-mac-address = <&uboot 0x1fc00>;
 177         pll-data = <0x03000101 0x00000101 0x00001616>;
 178
 179         fixed-link {
 180                 speed = <1000>;
 181                 full-duplex;
 182         };
 183 };
 184
 185 &wmac {
 186         status = "okay";
 187
 188         mtd-cal-data = <&art 0x1000>;
 189         mtd-mac-address = <&uboot 0x1fc00>;
 190 };