target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         compatible = "librerouter,librerouter-v1", "qca,qca9558";
  11         model = "LibreRouter v1";
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_system: system {
  24                         label = "librerouter-v1:green:system";
  25                         gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
  26                         default-state = "on";
  27                 };
  28
  29                 wifi_green {
  30                         label = "librerouter-v1:green:wlan2g";
  31                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  32                         linux,default-trigger = "phy0tpt";
  33                 };
  34
  35                 status_blue {
  36                         label = "librerouter-v1:blue:status";
  37                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  38                 };
  39         };
  40
  41         keys {
  42                 compatible = "gpio-keys";
  43
  44                 reset {
  45                         label = "Reset";
  46                         linux,code = <KEY_RESTART>;
  47                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  48                         debounce-interval = <60>;
  49                 };
  50         };
  51
  52         watchdog {
  53                 compatible = "linux,wdt-gpio";
  54                 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  55                 hw_algo = "toggle";
  56                 hw_margin_ms = <1000>;
  57                 always-running;
  58         };
  59 };
  60
  61 &pcie0 {
  62         status = "okay";
  63
  64         wifi@0,0 {
  65                 compatible = "pci168c,0033";
  66                 reg = <0x0000 0 0 0 0>;
  67         };
  68 };
  69
  70 &pcie1 {
  71         status = "okay";
  72
  73         wifi@0,0 {
  74                 compatible = "pci168c,0033";
  75                 reg = <0x0000 0 0 0 0>;
  76         };
  77 };
  78
  79 &uart {
  80         status = "okay";
  81 };
  82
  83 &gpio {
  84         status = "okay";
  85 };
  86
  87 &usb_phy0 {
  88         status = "okay";
  89 };
  90
  91 &usb0 {
  92         #address-cells = <1>;
  93         #size-cells = <0>;
  94         status = "okay";
  95 };
  96
  97 &usb_phy1 {
  98         status = "okay";
  99 };
 100
 101 &usb1 {
 102         #address-cells = <1>;
 103         #size-cells = <0>;
 104         status = "okay";
 105 };
 106
 107 &spi {
 108         status = "okay";
 109
 110         num-cs = <1>;
 111
 112         flash@0 {
 113                 compatible = "jedec,spi-nor";
 114                 reg = <0>;
 115                 spi-max-frequency = <25000000>;
 116
 117                 partitions {
 118                         compatible = "fixed-partitions";
 119                         #address-cells = <1>;
 120                         #size-cells = <1>;
 121
 122                         partition@0 {
 123                                 label = "u-boot";
 124                                 reg = <0x000000 0x040000>;
 125                                 read-only;
 126                         };
 127
 128                         partition@40000 {
 129                                 label = "u-boot-env";
 130                                 reg = <0x040000 0x010000>;
 131                         };
 132
 133                         partition@50000 {
 134                                 compatible = "denx,uimage";
 135                                 label = "firmware";
 136                                 reg = <0x050000 0x7c0000>;
 137                         };
 138
 139                         partition@810000 {
 140                                 label = "fw2";
 141                                 reg = <0x810000 0x7d0000>;
 142                         };
 143
 144                         partition@fd0000 {
 145                                 label = "res";
 146                                 reg = <0xfd0000 0x20000>;
 147                         };
 148
 149                         art: partition@ff0000 {
 150                                 label = "art";
 151                                 reg = <0xff0000 0x010000>;
 152                                 read-only;
 153                         };
 154                 };
 155         };
 156 };
 157
 158 &mdio0 {
 159         status = "okay";
 160
 161         phy0: ethernet-phy@0 {
 162                 reg = <0>;
 163                 qca,ar8327-initvals = <
 164                         0x04 0x87600000 /* PORT0: RGMII, MAC0/6 exchage, tx_delay 01, rx_delay 10 */
 165                         0x0c 0x00000080 /* PORT6: SGMII */
 166                         0x10 0x81000080 /* POWER_ON_STRAP: LED open drain, SerDes auto-neg disabled */
 167                         0x50 0xcf37cf37 /* LED_CTRL0 */
 168                         0x54 0xcf37cf37 /* LED_CTRL1 */
 169                         0x58 0xcf37cf37 /* LED_CTRL2 */
 170                         0x5c 0x0        /* LED_CTRL3 */
 171                         0x7c 0x0000007e /* PORT0_STATUS */
 172                         0x94 0x0000007e /* PORT6 STATUS */
 173                 >;
 174         };
 175 };
 176
 177 &eth0 {
 178         status = "okay";
 179
 180         pll-data = <0xa6000000 0x00000101 0x00001616>;
 181         mtd-mac-address = <&art 0x0>;
 182
 183         phy-handle = <&phy0>;
 184 };
 185
 186 &eth1 {
 187         status = "okay";
 188
 189         phy-mode = "sgmii";
 190         pll-data = <0x03000101 0x00000101 0x00001616>;
 191         mtd-mac-address = <&art 0x6>;
 192
 193         fixed-link {
 194                 speed = <1000>;
 195                 full-duplex;
 196         };
 197 };
 198
 199 &wmac {
 200         status = "okay";
 201
 202         mtd-cal-data = <&art 0x1000>;
 203         mtd-mac-address = <&art 0xc>;
 204 };