target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         compatible = "mikrotik,routerboard-wap-g-5hact2hnd", "qca,qca9556";
  11         model = "MikroTik RouterBOARD wAP G-5HacT2HnD";
  12
  13         aliases {
  14                 mdio-gpio1 = &mdio2;
  15                 serial0 = &uart;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200n8";
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys";
  24
  25                 reset {
  26                         label = "reset";
  27                         linux,code = <KEY_RESTART>;
  28                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  29                         debounce-interval = <60>;
  30                 };
  31         };
  32
  33         mdio2: mdio {
  34                 compatible = "virtual,mdio-gpio";
  35
  36                 gpios = <&gpio 12 GPIO_ACTIVE_HIGH>, /* MDC */
  37                         <&gpio 11 GPIO_ACTIVE_HIGH>; /* MDIO */
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40
  41                 phy0: ethernet-phy@0 {
  42                         reg = <0>;
  43                         device_type = "ethernet-phy";
  44
  45                         phy-mode = "sgmii";
  46
  47                         at803x-override-sgmii-link-check;
  48                 };
  49         };
  50 };
  51
  52 &eth1 {
  53         status = "okay";
  54
  55         pll-data = <0x03000101 0x80000101 0x80001313>;
  56         phy-handle = <&phy0>;
  57
  58         qca955x-sgmii-fixup;
  59
  60         gmac-config {
  61                 device = <&gmac>;
  62         };
  63 };
  64
  65 &spi {
  66         status = "okay";
  67
  68         num-cs = <1>;
  69
  70         flash@0 {
  71                 compatible = "jedec,spi-nor";
  72                 reg = <0>;
  73                 spi-max-frequency = <40000000>;
  74
  75                 partitions {
  76                         compatible = "fixed-partitions";
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79
  80                         partition@0 {
  81                                 label = "RouterBoot";
  82                                 reg = <0x0 0x20000>;
  83                                 read-only;
  84                                 compatible = "mikrotik,routerboot-partitions";
  85                                 #address-cells = <1>;
  86                                 #size-cells = <1>;
  87
  88                                 partition@0 {
  89                                         label = "bootloader1";
  90                                         reg = <0x0 0x0>;
  91                                         read-only;
  92                                 };
  93
  94                                 hard_config: hard_config {
  95                                         read-only;
  96                                 };
  97
  98                                 bios {
  99                                         size = <0x1000>;
 100                                         read-only;
 101                                 };
 102
 103                                 partition@10000 {
 104                                         label = "bootloader2";
 105                                         reg = <0x10000 0x0>;
 106                                         read-only;
 107                                 };
 108
 109                                 soft_config {
 110                                         label = "soft_config";
 111                                 };
 112                         };
 113
 114                         partition@20000 {
 115                                 compatible = "mikrotik,minor";
 116                                 label = "firmware";
 117                                 reg = <0x020000 0xfe0000>;
 118                         };
 119                 };
 120         };
 121 };
 122
 123 &uart {
 124         status = "okay";
 125 };
 126
 127 &wmac {
 128         status = "okay";
 129
 130         qca,no-eeprom;
 131 };
 132
 133 &pcie0 {
 134         status = "okay";
 135
 136         wifi@0,0 {
 137                 compatible = "qcom,ath10k";
 138                 reg = <0 0 0 0 0>;
 139         };
 140 };