target/linux/ath79/dts/qca953x_tplink_tl-wr810n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca953x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_system;
  11                 led-failsafe = &led_system;
  12                 led-running = &led_system;
  13                 led-upgrade = &led_system;
  14                 label-mac-device = &eth1;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_system: system {
  21                         label = "tp-link:blue:system";
  22                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys";
  28
  29                 reset {
  30                         label = "Reset button";
  31                         linux,code = <KEY_RESTART>;
  32                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 switch_b0 {
  37                         label = "switch_b0";
  38                         linux,input-type = <EV_SW>;
  39                         linux,code = <BTN_0>;
  40                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  41                         debounce-interval = <60>;
  42                 };
  43
  44                 switch_b1 {
  45                         label = "switch_b1";
  46                         linux,input-type = <EV_SW>;
  47                         linux,code = <BTN_1>;
  48                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  49                         debounce-interval = <60>;
  50                 };
  51         };
  52 };
  53
  54 &uart {
  55         status = "okay";
  56 };
  57
  58 &spi {
  59         status = "okay";
  60
  61         num-cs = <1>;
  62
  63         flash@0 {
  64                 compatible = "jedec,spi-nor";
  65                 reg = <0>;
  66                 spi-max-frequency = <25000000>;
  67
  68                 partitions {
  69                         compatible = "fixed-partitions";
  70                         #address-cells = <1>;
  71                         #size-cells = <1>;
  72
  73                         uboot: partition@0 {
  74                                 label = "u-boot";
  75                                 reg = <0x000000 0x020000>;
  76                                 read-only;
  77                         };
  78
  79                         partition@20000 {
  80                                 compatible = "tplink,firmware";
  81                                 label = "firmware";
  82                                 reg = <0x020000 0x7d0000>;
  83                         };
  84
  85                         art: partition@7f0000 {
  86                                 label = "art";
  87                                 reg = <0x7f0000 0x010000>;
  88                                 read-only;
  89                         };
  90                 };
  91         };
  92 };
  93
  94 &eth1 {
  95         mtd-mac-address = <&uboot 0x1fc00>;
  96 };
  97
  98 &eth0 {
  99         status = "okay";
 100
 101         phy-handle = <&swphy4>;
 102
 103         mtd-mac-address = <&uboot 0x1fc00>;
 104         mtd-mac-address-increment = <1>;
 105 };
 106
 107 &wmac {
 108         status = "okay";
 109
 110         mtd-cal-data = <&art 0x1000>;
 111         mtd-mac-address = <&uboot 0x1fc00>;
 112 };