target/linux/ath79/dts/qca953x_tplink_tl-wr810n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca953x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18                 label-mac-device = &eth1;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 led_system: system {
  25                         label = "tp-link:blue:system";
  26                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  27                 };
  28         };
  29
  30         keys {
  31                 compatible = "gpio-keys";
  32
  33                 reset {
  34                         label = "Reset button";
  35                         linux,code = <KEY_RESTART>;
  36                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  37                         debounce-interval = <60>;
  38                 };
  39
  40                 switch_b0 {
  41                         label = "switch_b0";
  42                         linux,input-type = <EV_SW>;
  43                         linux,code = <BTN_0>;
  44                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  45                         debounce-interval = <60>;
  46                 };
  47
  48                 switch_b1 {
  49                         label = "switch_b1";
  50                         linux,input-type = <EV_SW>;
  51                         linux,code = <BTN_1>;
  52                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  53                         debounce-interval = <60>;
  54                 };
  55         };
  56 };
  57
  58 &uart {
  59         status = "okay";
  60 };
  61
  62 &spi {
  63         status = "okay";
  64
  65         num-cs = <1>;
  66
  67         flash@0 {
  68                 compatible = "jedec,spi-nor";
  69                 reg = <0>;
  70                 spi-max-frequency = <25000000>;
  71
  72                 partitions {
  73                         compatible = "fixed-partitions";
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76
  77                         uboot: partition@0 {
  78                                 label = "u-boot";
  79                                 reg = <0x000000 0x020000>;
  80                                 read-only;
  81                         };
  82
  83                         partition@20000 {
  84                                 compatible = "tplink,firmware";
  85                                 label = "firmware";
  86                                 reg = <0x020000 0x7d0000>;
  87                         };
  88
  89                         art: partition@7f0000 {
  90                                 label = "art";
  91                                 reg = <0x7f0000 0x010000>;
  92                                 read-only;
  93                         };
  94                 };
  95         };
  96 };
  97
  98 &eth1 {
  99         mtd-mac-address = <&uboot 0x1fc00>;
 100 };
 101
 102 &eth0 {
 103         status = "okay";
 104
 105         phy-handle = <&swphy4>;
 106
 107         mtd-mac-address = <&uboot 0x1fc00>;
 108         mtd-mac-address-increment = <1>;
 109 };
 110
 111 &wmac {
 112         status = "okay";
 113
 114         mtd-cal-data = <&art 0x1000>;
 115         mtd-mac-address = <&uboot 0x1fc00>;
 116 };