target/linux/ath79/dts/qca9533_tplink_tl-wr802n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca953x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_system;
  11                 led-failsafe = &led_system;
  12                 led-running = &led_system;
  13                 led-upgrade = &led_system;
  14                 label-mac-device = &wmac;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_system: system {
  21                         label = "tp-link:green:system";
  22                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys";
  28
  29                 reset {
  30                         label = "Reset button";
  31                         linux,code = <KEY_RESTART>;
  32                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35 };
  36
  37 &uart {
  38         status = "okay";
  39 };
  40
  41 &spi {
  42         status = "okay";
  43
  44         num-cs = <1>;
  45
  46         flash@0 {
  47                 compatible = "jedec,spi-nor";
  48                 reg = <0>;
  49                 spi-max-frequency = <50000000>;
  50
  51                 partitions {
  52                         compatible = "fixed-partitions";
  53                         #address-cells = <1>;
  54                         #size-cells = <1>;
  55
  56                         uboot: partition@0 {
  57                                 label = "u-boot";
  58                                 reg = <0x000000 0x020000>;
  59                                 read-only;
  60                         };
  61
  62                         partition@20000 {
  63                                 label = "firmware";
  64                                 reg = <0x020000 0x3d0000>;
  65                                 compatible = "tplink,firmware";
  66                         };
  67
  68                         art: partition@3f0000 {
  69                                 label = "art";
  70                                 reg = <0x3f0000 0x010000>;
  71                                 read-only;
  72                         };
  73                 };
  74         };
  75 };
  76
  77 &wmac {
  78         status = "okay";
  79
  80         mtd-cal-data = <&art 0x1000>;
  81         mtd-mac-address = <&uboot 0x1fc00>;
  82 };
  83
  84 &eth0 {
  85         status = "okay";
  86
  87         phy-handle = <&swphy4>;
  88
  89         mtd-mac-address = <&uboot 0x1fc00>;
  90         mtd-mac-address-increment = <1>;
  91 };
  92
  93 &eth1 {
  94         compatible = "syscon", "simple-mfd";
  95 };