target/linux/ath79/dts/qca9531_yuncore_a770.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         model = "YunCore A770";
  11         compatible = "yuncore,a770", "qca,qca9531";
  12
  13         aliases {
  14                 led-boot = &led_status;
  15                 led-failsafe = &led_status;
  16                 led-running = &led_status;
  17                 led-upgrade = &led_status;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         linux,code = <KEY_RESTART>;
  26                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  27                         debounce-interval = <60>;
  28                 };
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33
  34                 lan {
  35                         label = "a770:green:lan";
  36                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 led_status: status {
  40                         label = "a770:green:status";
  41                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  42                         default-state = "keep";
  43                 };
  44
  45                 wan {
  46                         label = "a770:green:wan";
  47                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 wlan2g {
  51                         label = "a770:red:wlan2g";
  52                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  53                         linux,default-trigger = "phy1tpt";
  54                 };
  55         };
  56 };
  57
  58 &eth0 {
  59         status = "okay";
  60
  61         phy-handle = <&swphy4>;
  62         mtd-mac-address = <&art 0x0>;
  63 };
  64
  65 &eth1 {
  66         mtd-mac-address = <&art 0x6>;
  67 };
  68
  69 &pcie0 {
  70         status = "okay";
  71 };
  72
  73 &spi {
  74         status = "okay";
  75
  76         num-cs = <1>;
  77
  78         flash@0 {
  79                 compatible = "jedec,spi-nor";
  80                 reg = <0>;
  81                 spi-max-frequency = <25000000>;
  82
  83                 partitions {
  84                         compatible = "fixed-partitions";
  85                         #address-cells = <1>;
  86                         #size-cells = <1>;
  87
  88                         partition@0 {
  89                                 label = "u-boot";
  90                                 reg = <0x000000 0x040000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@40000 {
  95                                 label = "u-boot-env";
  96                                 reg = <0x040000 0x010000>;
  97                         };
  98
  99                         partition@50000 {
 100                                 compatible = "denx,uimage";
 101                                 label = "firmware";
 102                                 reg = <0x050000 0xfa0000>;
 103                         };
 104
 105                         art: partition@ff0000 {
 106                                 label = "art";
 107                                 reg = <0xff0000 0x010000>;
 108                                 read-only;
 109                         };
 110                 };
 111         };
 112 };
 113
 114 &uart {
 115         status = "okay";
 116 };
 117
 118 &wmac {
 119         status = "okay";
 120
 121         mtd-cal-data = <&art 0x1000>;
 122 };