target/linux/ath79/dts/ar7161_siemens_ws-ap3610.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         compatible = "siemens,ws-ap3610", "qca,ar7161";
  11         model = "Siemens WS-AP3610";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_power_green;
  19                 led-failsafe = &led_power_red;
  20                 led-running = &led_power_green;
  21                 led-upgrade = &led_power_red;
  22                 label-mac-device = &eth0;
  23         };
  24
  25         extosc: ref {
  26                 compatible = "fixed-clock";
  27                 #clock-cells = <0>;
  28                 clock-output-names = "ref";
  29                 clock-frequency = <40000000>;
  30         };
  31
  32         leds {
  33                 compatible = "gpio-leds";
  34
  35                 led_power_green: led_power_green {
  36                         label = "ws-ap3610:green:power";
  37                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 led_power_red: led_power_red {
  41                         label = "ws-ap3610:red:power";
  42                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 led_wlan5_blue {
  46                         label = "ws-ap3610:blue:wlan5";
  47                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  48                         linux,default-trigger = "phy0tpt";
  49                 };
  50
  51                 led_wlan5_green {
  52                         label = "ws-ap3610:green:wlan5";
  53                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 led_wlan2_blue {
  57                         label = "ws-ap3610:blue:wlan2";
  58                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  59                         linux,default-trigger = "phy1tpt";
  60                 };
  61
  62                 led_wlan2_green {
  63                         label = "ws-ap3610:green:wlan2";
  64                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  65                 };
  66         };
  67
  68         keys {
  69                 compatible = "gpio-keys";
  70
  71                 reset {
  72                         label = "reset";
  73                         linux,code = <KEY_RESTART>;
  74                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  75                 };
  76         };
  77 };
  78
  79 &pcie0 {
  80         status = "okay";
  81 };
  82
  83 &uart {
  84         status = "okay";
  85 };
  86
  87 &mdio0 {
  88         status = "okay";
  89
  90         phy0: ethernet-phy@0 {
  91                 /*
  92                  * When the compatible-is missing, PHY autodetection
  93                  * is performed, but the PHY-ID reads all 0xff.
  94                  *
  95                  * Linux does not create the device in this case,
  96                  * and the reset is never even de-asserted.
  97                  */
  98                 compatible = "ethernet-phy-id0143.bca2",
  99                                 "ethernet-phy-ieee802.3-c22";
 100                 reg = <0>;
 101
 102                 resets = <&rst 8>;
 103                 reset-names = "phy";
 104                 reset-assert-us = <10000>;
 105                 reset-deassert-us = <10000>;
 106         };
 107 };
 108
 109 &eth0 {
 110         status = "okay";
 111
 112         phy-mode = "rgmii-id";
 113         phy-handle = <&phy0>;
 114 };
 115
 116 &spi {
 117         status = "okay";
 118
 119         num-cs = <1>;
 120
 121         flash@0 {
 122                 compatible = "jedec,spi-nor";
 123                 reg = <0>;
 124                 spi-max-frequency = <25000000>;
 125
 126                 partitions {
 127                         compatible = "fixed-partitions";
 128                         #address-cells = <1>;
 129                         #size-cells = <1>;
 130
 131                         partition@0 {
 132                                 label = "u-boot";
 133                                 reg = <0x0 0x40000>;
 134                                 read-only;
 135                         };
 136
 137                         partition@40000 {
 138                                 label = "u-boot-bak";
 139                                 reg = <0x40000 0x40000>;
 140                                 read-only;
 141                         };
 142
 143                         partition@80000 {
 144                                 compatible = "denx,uimage";
 145                                 label = "firmware";
 146                                 reg = <0x80000 0xe00000>;
 147                         };
 148
 149                         partition@e80000 {
 150                                 label = "cfg1";
 151                                 reg = <0xe80000 0x40000>;
 152                                 read-only;
 153                         };
 154
 155                         partition@ec0000 {
 156                                 label = "cfg2";
 157                                 reg = <0xec0000 0x40000>;
 158                                 read-only;
 159                         };
 160
 161                         partition@f00000 {
 162                                 label = "nvram1";
 163                                 reg = <0xf00000 0x40000>;
 164                                 read-only;
 165                         };
 166
 167                         partition@f40000 {
 168                                 label = "nvram2";
 169                                 reg = <0xf40000 0x40000>;
 170                                 read-only;
 171                         };
 172
 173                         partition@f80000 {
 174                                 label = "rsvd1";
 175                                 reg = <0xf80000 0x40000>;
 176                                 read-only;
 177                         };
 178
 179                         partition@fc0000 {
 180                                 label = "rsvd2";
 181                                 reg = <0xfc0000 0x40000>;
 182                                 read-only;
 183                         };
 184                 };
 185         };
 186 };