target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         compatible = "buffalo,wzr-hp-ag300h", "qca,ar7161";
  11         model = "Buffalo WZR-HP-AG300H/WZR-600DHP";
  12
  13         aliases {
  14                 led-boot = &led_diag;
  15                 led-failsafe = &led_diag;
  16                 led-upgrade = &led_diag;
  17         };
  18
  19         extosc: ref {
  20                 compatible = "fixed-clock";
  21                 #clock-cells = <0>;
  22                 clock-output-names = "ref";
  23                 clock-frequency = <40000000>;
  24         };
  25
  26         leds {
  27                 compatible = "gpio-leds";
  28
  29                 led_diag: diag {
  30                         label = "buffalo:red:diag";
  31                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  32                 };
  33         };
  34
  35         ath9k-leds {
  36                 compatible = "gpio-leds";
  37
  38                 band2g_a {
  39                         label = "buffalo:amber:band2g";
  40                         gpios = <&ath9k0 1 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 usb {
  44                         label = "buffalo:green:usb";
  45                         gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
  46                         trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
  47                         linux,default-trigger = "usbport";
  48                 };
  49
  50                 band2g_g {
  51                         label = "buffalo:green:band2g";
  52                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
  53                         linux,default-trigger = "phy0tpt";
  54                 };
  55
  56                 band5g_g {
  57                         label = "buffalo:green:band5g";
  58                         gpios = <&ath9k1 1 GPIO_ACTIVE_LOW>;
  59                         linux,default-trigger = "phy1tpt";
  60                 };
  61
  62                 router {
  63                         label = "buffalo:green:router";
  64                         gpios = <&ath9k1 3 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 movie_engine {
  68                         label = "buffalo:blue:movie_engine";
  69                         gpios = <&ath9k1 4 GPIO_ACTIVE_LOW>;
  70                 };
  71
  72                 band5g_a {
  73                         label = "buffalo:amber:band5g";
  74                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
  75                 };
  76         };
  77
  78         keys {
  79                 compatible = "gpio-keys";
  80
  81                 reset {
  82                         linux,code = <KEY_RESTART>;
  83                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  84                         debounce-interval = <60>;
  85                 };
  86
  87                 usb {
  88                         linux,code = <BTN_2>;
  89                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  90                         debounce-interval = <60>;
  91                 };
  92
  93                 aoss {
  94                         linux,code = <KEY_WPS_BUTTON>;
  95                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  96                         debounce-interval = <60>;
  97                 };
  98
  99                 router_auto {
 100                         linux,code = <BTN_6>;
 101                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 102                         debounce-interval = <60>;
 103                 };
 104
 105                 router_off {
 106                         linux,code = <BTN_5>;
 107                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 108                         debounce-interval = <60>;
 109                 };
 110
 111                 movie_engine {
 112                         linux,code = <BTN_7>;
 113                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 114                         debounce-interval = <60>;
 115                 };
 116         };
 117
 118         gpio-export {
 119                 compatible = "gpio-export";
 120
 121                 gpio_usb_power {
 122                         gpio-export,name = "buffalo:power:usb";
 123                         gpio-export,output = <1>;
 124                         gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
 125                 };
 126         };
 127
 128         flash {
 129                 compatible = "mtd-concat";
 130
 131                 devices = <&flash0 &flash1>;
 132
 133                 partitions {
 134                         compatible = "fixed-partitions";
 135                         #address-cells = <1>;
 136                         #size-cells = <1>;
 137                         partition@0 {
 138                                 label = "u-boot";
 139                                 reg = <0x0000000 0x0040000>;
 140                                 read-only;
 141                         };
 142
 143                         partition@40000 {
 144                                 label = "u-boot-env";
 145                                 reg = <0x0040000 0x0010000>;
 146                                 read-only;
 147                         };
 148
 149                         art: partition@50000 {
 150                                 label = "art";
 151                                 reg = <0x0050000 0x0010000>;
 152                                 read-only;
 153                         };
 154
 155                         partition@60000 {
 156                                 compatible = "denx,uimage";
 157                                 label = "firmware";
 158                                 reg = <0x0060000 0x1f90000>;
 159                         };
 160
 161                         partition@1ff0000 {
 162                                 label = "user_property";
 163                                 reg = <0x1ff0000 0x0010000>;
 164                                 read-only;
 165                         };
 166                 };
 167         };
 168 };
 169
 170 &usb_phy {
 171         status = "okay";
 172 };
 173
 174 &usb1 {
 175         #address-cells = <1>;
 176         #size-cells = <0>;
 177         status = "okay";
 178
 179         usb_ohci_port: port@1 {
 180                 reg = <1>;
 181                 #trigger-source-cells = <0>;
 182         };
 183 };
 184
 185 &usb2 {
 186         #address-cells = <1>;
 187         #size-cells = <0>;
 188         status = "okay";
 189
 190         usb_ehci_port: port@1 {
 191                 reg = <1>;
 192                 #trigger-source-cells = <0>;
 193         };
 194 };
 195
 196 &pcie0 {
 197         status = "okay";
 198
 199         ath9k0: wifi@0,11 {
 200                 compatible = "pci168c,0029";
 201                 reg = <0x8800 0 0 0 0>;
 202                 qca,no-eeprom;
 203                 #gpio-cells = <2>;
 204                 gpio-controller;
 205         };
 206
 207         ath9k1: wifi@0,12 {
 208                 compatible = "pci168c,0029";
 209                 reg = <0x9000 0 0 0 0>;
 210                 qca,no-eeprom;
 211                 #gpio-cells = <2>;
 212                 gpio-controller;
 213         };
 214 };
 215
 216 &uart {
 217         status = "okay";
 218 };
 219
 220 &pll {
 221         clocks = <&extosc>;
 222 };
 223
 224 &spi {
 225         status = "okay";
 226
 227         num-cs = <2>;
 228         cs-gpios = <0>, <0>;
 229
 230         flash0: flash@0 {
 231                 compatible = "jedec,spi-nor";
 232                 reg = <0>;
 233                 spi-max-frequency = <50000000>;
 234                 m25p,fast-read;
 235         };
 236
 237         flash1: flash@1 {
 238                 compatible = "jedec,spi-nor";
 239                 reg = <1>;
 240                 spi-max-frequency = <50000000>;
 241                 m25p,fast-read;
 242         };
 243 };
 244
 245 &mdio0 {
 246         status = "okay";
 247
 248         phy4: ethernet-phy@4 {
 249                 reg = <4>;
 250                 phy-mode = "rgmii";
 251         };
 252 };
 253
 254 &eth0 {
 255         status = "okay";
 256
 257         mtd-mac-address = <&art 0x120c>;
 258
 259         fixed-link {
 260                 speed = <1000>;
 261                 full-duplex;
 262         };
 263 };
 264
 265 &eth1 {
 266         status = "okay";
 267
 268         mtd-mac-address = <&art 0x520c>;
 269         mtd-mac-address-increment = <1>;
 270
 271         phy-handle = <&phy4>;
 272 };