[here](https://github.com/jclehner/nmrpflash/releases)
([WinPcap](https://www.winpcap.org/install/default.htm) is required on Windows).
-````
+```
Usage: nmrpflash [OPTIONS...]
-Options (-a, -i and -f are mandatory):
+Options (-a, -i and -f and/or -c are mandatory):
-a <ipaddr> IP address to assign to target device
+ -c <command> Command to run before (or instead of) TFTP upload
-f <firmware> Firmware file
+ -F <filename> Remote filename to use during TFTP upload
-i <interface> Network interface directly connected to device
-m <mac> MAC address of target device (xx:xx:xx:xx:xx:xx)
-M <netmask> Subnet mask to assign to target device
-t <timeout> Timeout (in milliseconds) for regular messages
- -T <timeout> Time to wait after successfull TFTP upload
+ -T <timeout> Time (seconds) to wait after successfull TFTP upload
-p <port> Port to use for TFTP upload
- -U Test TFTP upload
-v Be verbose
-V Print version and exit
-L List network interfaces
-h Show this screen
-````
+```
### Using nmrpflash
In this example, we'll use `192.168.1.2`. All available network interfaces
can be listed using
-````
+```
$ nmrpflash -L
eth0 192.168.1.2 f2:11:a1:02:03:b1
-````
+```
Now we can `nmrpflash`. The argument for the `-a` option needs
to be a *free* IP address from the same subnet as the one used by your
[here](#obtaining-firmware-images). Power on your device immediately
after starting `nmrpflash`.
-````
+```
$ nmrpflash -i eth0 -a 192.168.1.254 -f EX2700-V1.0.1.8.img
Advertising NMRP server on eth0 ... /
Received configuration request from a4:2b:8c:00:00:01.
Uploading EX2700-V1.0.1.8.img ... OK
Waiting for remote to respond.
Remote finished. Closing connection.
-````
+```
### Common issues
###### "No suitable network interfaces found."
### Building and installing
###### Linux, Mac OS X, BSDs
-````
+```
$ make && sudo make install
-````
+```
###### Windows