procps/powertop.c

   1 /* vi: set sw=4 ts=4: */
   2 /*
   3  * A mini 'powertop' utility:
   4  *   Analyze power consumption on Intel-based laptops.
   5  * Based on powertop 1.11.
   6  *
   7  * Copyright (C) 2010 Marek Polacek <mmpolacek@gmail.com>
   8  *
   9  * Licensed under GPLv2, see file LICENSE in this source tree.
  10  */
  11 //config:config POWERTOP
  12 //config:       bool "powertop (9.6 kb)"
  13 //config:       default y
  14 //config:       help
  15 //config:       Analyze power consumption on Intel-based laptops
  16 //config:
  17 //config:config FEATURE_POWERTOP_INTERACTIVE
  18 //config:       bool "Accept keyboard commands"
  19 //config:       default y
  20 //config:       depends on POWERTOP
  21 //config:       help
  22 //config:       Without this, powertop will only refresh display every 10 seconds.
  23 //config:       No keyboard commands will work, only ^C to terminate.
  24
  25 //applet:IF_POWERTOP(APPLET(powertop, BB_DIR_USR_SBIN, BB_SUID_DROP))
  26
  27 //kbuild:lib-$(CONFIG_POWERTOP) += powertop.o
  28
  29 // XXX This should be configurable
  30 #define ENABLE_FEATURE_POWERTOP_PROCIRQ 1
  31
  32 #include "libbb.h"
  33
  34
  35 //#define debug(fmt, ...) fprintf(stderr, fmt, ## __VA_ARGS__)
  36 #define debug(fmt, ...) ((void)0)
  37
  38
  39 #define BLOATY_HPET_IRQ_NUM_DETECTION 0
  40 #define MAX_CSTATE_COUNT   8
  41 #define IRQCOUNT           40
  42
  43
  44 #define DEFAULT_SLEEP      10
  45 #define DEFAULT_SLEEP_STR "10"
  46
  47 /* Frequency of the ACPI timer */
  48 #define FREQ_ACPI          3579.545
  49 #define FREQ_ACPI_1000     3579545
  50
  51 /* Max filename length of entry in /sys/devices subsystem */
  52 #define BIG_SYSNAME_LEN    16
  53
  54 #define ESC "\033"
  55
  56 typedef unsigned long long ullong;
  57
  58 struct line {
  59         char *string;
  60         int count;
  61         /*int disk_count;*/
  62 };
  63
  64 #if ENABLE_FEATURE_POWERTOP_PROCIRQ
  65 struct irqdata {
  66         smallint active;
  67         int number;
  68         ullong count;
  69         char irq_desc[32];
  70 };
  71 #endif
  72
  73 struct globals {
  74         struct line *lines; /* the most often used member */
  75         int lines_cnt;
  76         int lines_cumulative_count;
  77         int maxcstate;
  78         unsigned total_cpus;
  79         smallint cant_enable_timer_stats;
  80 #if ENABLE_FEATURE_POWERTOP_PROCIRQ
  81 # if BLOATY_HPET_IRQ_NUM_DETECTION
  82         smallint scanned_timer_list;
  83         int percpu_hpet_start;
  84         int percpu_hpet_end;
  85 # endif
  86         int interrupt_0;
  87         int total_interrupt;
  88         struct irqdata interrupts[IRQCOUNT];
  89 #endif
  90         ullong start_usage[MAX_CSTATE_COUNT];
  91         ullong last_usage[MAX_CSTATE_COUNT];
  92         ullong start_duration[MAX_CSTATE_COUNT];
  93         ullong last_duration[MAX_CSTATE_COUNT];
  94 #if ENABLE_FEATURE_POWERTOP_INTERACTIVE
  95         struct termios init_settings;
  96 #endif
  97 };
  98 #define G (*ptr_to_globals)
  99 #define INIT_G() do { \
 100         SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \
 101 } while (0)
 102
 103 #if ENABLE_FEATURE_POWERTOP_INTERACTIVE
 104 static void reset_term(void)
 105 {
 106         tcsetattr_stdin_TCSANOW(&G.init_settings);
 107 }
 108
 109 static void sig_handler(int signo UNUSED_PARAM)
 110 {
 111         reset_term();
 112         _exit(EXIT_FAILURE);
 113 }
 114 #endif
 115
 116 static int write_str_to_file(const char *fname, const char *str)
 117 {
 118         FILE *fp = fopen_for_write(fname);
 119         if (!fp)
 120                 return 1;
 121         fputs(str, fp);
 122         fclose(fp);
 123         return 0;
 124 }
 125
 126 /* Make it more readable */
 127 #define start_timer() write_str_to_file("/proc/timer_stats", "1\n")
 128 #define stop_timer()  write_str_to_file("/proc/timer_stats", "0\n")
 129
 130 static NOINLINE void clear_lines(void)
 131 {
 132         int i;
 133         if (G.lines) {
 134                 for (i = 0; i < G.lines_cnt; i++)
 135                         free(G.lines[i].string);
 136                 free(G.lines);
 137                 G.lines_cnt = 0;
 138                 G.lines = NULL;
 139         }
 140 }
 141
 142 static void update_lines_cumulative_count(void)
 143 {
 144         int i;
 145         for (i = 0; i < G.lines_cnt; i++)
 146                 G.lines_cumulative_count += G.lines[i].count;
 147 }
 148
 149 static int line_compare(const void *p1, const void *p2)
 150 {
 151         const struct line *a = p1;
 152         const struct line *b = p2;
 153         return (b->count /*+ 50 * b->disk_count*/) - (a->count /*+ 50 * a->disk_count*/);
 154 }
 155
 156 static void sort_lines(void)
 157 {
 158         qsort(G.lines, G.lines_cnt, sizeof(G.lines[0]), line_compare);
 159 }
 160
 161 /* Save C-state usage and duration. Also update maxcstate. */
 162 static void read_cstate_counts(ullong *usage, ullong *duration)
 163 {
 164         DIR *dir;
 165         struct dirent *d;
 166
 167         dir = opendir("/proc/acpi/processor");
 168         if (!dir)
 169                 return;
 170
 171         while ((d = readdir(dir)) != NULL) {
 172                 FILE *fp;
 173                 char buf[192];
 174                 int level;
 175                 int len;
 176
 177                 len = strlen(d->d_name); /* "CPUnn" */
 178                 if (len < 3 || len > BIG_SYSNAME_LEN)
 179                         continue;
 180
 181                 sprintf(buf, "%s/%s/power", "/proc/acpi/processor", d->d_name);
 182                 fp = fopen_for_read(buf);
 183                 if (!fp)
 184                         continue;
 185
 186 // Example file contents:
 187 // active state:            C0
 188 // max_cstate:              C8
 189 // maximum allowed latency: 2000000000 usec
 190 // states:
 191 //     C1:                  type[C1] promotion[--] demotion[--] latency[001] usage[00006173] duration[00000000000000000000]
 192 //     C2:                  type[C2] promotion[--] demotion[--] latency[001] usage[00085191] duration[00000000000083024907]
 193 //     C3:                  type[C3] promotion[--] demotion[--] latency[017] usage[01017622] duration[00000000017921327182]
 194                 level = 0;
 195                 while (fgets(buf, sizeof(buf), fp)) {
 196                         char *p = strstr(buf, "age[");
 197                         if (!p)
 198                                 continue;
 199                         p += 4;
 200                         usage[level] += bb_strtoull(p, NULL, 10) + 1;
 201                         p = strstr(buf, "ation[");
 202                         if (!p)
 203                                 continue;
 204                         p += 6;
 205                         duration[level] += bb_strtoull(p, NULL, 10);
 206
 207                         if (level >= MAX_CSTATE_COUNT-1)
 208                                 break;
 209                         level++;
 210                         if (level > G.maxcstate)  /* update maxcstate */
 211                                 G.maxcstate = level;
 212                 }
 213                 fclose(fp);
 214         }
 215         closedir(dir);
 216 }
 217
 218 /* Add line and/or update count */
 219 static void save_line(const char *string, int count)
 220 {
 221         int i;
 222         for (i = 0; i < G.lines_cnt; i++) {
 223                 if (strcmp(string, G.lines[i].string) == 0) {
 224                         /* It's already there, only update count */
 225                         G.lines[i].count += count;
 226                         return;
 227                 }
 228         }
 229
 230         /* Add new line */
 231         G.lines = xrealloc_vector(G.lines, 4, G.lines_cnt);
 232         G.lines[G.lines_cnt].string = xstrdup(string);
 233         G.lines[G.lines_cnt].count = count;
 234         /*G.lines[G.lines_cnt].disk_count = 0;*/
 235         G.lines_cnt++;
 236 }
 237
 238 #if ENABLE_FEATURE_POWERTOP_PROCIRQ
 239 static int is_hpet_irq(const char *name)
 240 {
 241         char *p;
 242 # if BLOATY_HPET_IRQ_NUM_DETECTION
 243         long hpet_chan;
 244
 245         /* Learn the range of existing hpet timers. This is done once */
 246         if (!G.scanned_timer_list) {
 247                 FILE *fp;
 248                 char buf[80];
 249
 250                 G.scanned_timer_list = true;
 251                 fp = fopen_for_read("/proc/timer_list");
 252                 if (!fp)
 253                         return 0;
 254
 255                 while (fgets(buf, sizeof(buf), fp)) {
 256                         p = strstr(buf, "Clock Event Device: hpet");
 257                         if (!p)
 258                                 continue;
 259                         p += sizeof("Clock Event Device: hpet")-1;
 260                         if (!isdigit(*p))
 261                                 continue;
 262                         hpet_chan = xatoi_positive(p);
 263                         if (hpet_chan < G.percpu_hpet_start)
 264                                 G.percpu_hpet_start = hpet_chan;
 265                         if (hpet_chan > G.percpu_hpet_end)
 266                                 G.percpu_hpet_end = hpet_chan;
 267                 }
 268                 fclose(fp);
 269         }
 270 # endif
 271 //TODO: optimize
 272         p = strstr(name, "hpet");
 273         if (!p)
 274                 return 0;
 275         p += 4;
 276         if (!isdigit(*p))
 277                 return 0;
 278 # if BLOATY_HPET_IRQ_NUM_DETECTION
 279         hpet_chan = xatoi_positive(p);
 280         if (hpet_chan < G.percpu_hpet_start || hpet_chan > G.percpu_hpet_end)
 281                 return 0;
 282 # endif
 283         return 1;
 284 }
 285
 286 /* Save new IRQ count, return delta from old one */
 287 static int save_irq_count(int irq, ullong count)
 288 {
 289         int unused = IRQCOUNT;
 290         int i;
 291         for (i = 0; i < IRQCOUNT; i++) {
 292                 if (G.interrupts[i].active && G.interrupts[i].number == irq) {
 293                         ullong old = G.interrupts[i].count;
 294                         G.interrupts[i].count = count;
 295                         return count - old;
 296                 }
 297                 if (!G.interrupts[i].active && unused > i)
 298                         unused = i;
 299         }
 300         if (unused < IRQCOUNT) {
 301                 G.interrupts[unused].active = 1;
 302                 G.interrupts[unused].count = count;
 303                 G.interrupts[unused].number = irq;
 304         }
 305         return count;
 306 }
 307
 308 /* Read /proc/interrupts, save IRQ counts and IRQ description */
 309 static void process_irq_counts(void)
 310 {
 311         FILE *fp;
 312         char buf[128];
 313
 314         /* Reset values */
 315         G.interrupt_0 = 0;
 316         G.total_interrupt = 0;
 317
 318         fp = xfopen_for_read("/proc/interrupts");
 319         while (fgets(buf, sizeof(buf), fp)) {
 320                 char irq_desc[sizeof("   <kernel IPI> : ") + sizeof(buf)];
 321                 char *p;
 322                 const char *name;
 323                 int nr;
 324                 ullong count;
 325                 ullong delta;
 326
 327                 p = strchr(buf, ':');
 328                 if (!p)
 329                         continue;
 330                 /*  0:  143646045  153901007   IO-APIC-edge      timer
 331                  *   ^
 332                  */
 333                 *p = '\0';
 334                 /* Deal with non-maskable interrupts -- make up fake numbers */
 335                 nr = index_in_strings("NMI\0RES\0CAL\0TLB\0TRM\0THR\0SPU\0", buf);
 336                 if (nr >= 0) {
 337                         nr += 20000;
 338                 } else {
 339                         /* bb_strtou doesn't eat leading spaces, using strtoul */
 340                         errno = 0;
 341                         nr = strtoul(buf, NULL, 10);
 342                         if (errno)
 343                                 continue;
 344                 }
 345                 p++;
 346                 /*  0:  143646045  153901007   IO-APIC-edge      timer
 347                  *    ^
 348                  */
 349                 /* Sum counts for this IRQ */
 350                 count = 0;
 351                 while (1) {
 352                         char *tmp;
 353                         p = skip_whitespace(p);
 354                         if (!isdigit(*p))
 355                                 break;
 356                         count += bb_strtoull(p, &tmp, 10);
 357                         p = tmp;
 358                 }
 359                 /*   0:  143646045  153901007   IO-APIC-edge      timer
 360                  * NMI:          1          2   Non-maskable interrupts
 361                  *                              ^
 362                  */
 363                 if (nr < 20000) {
 364                         /* Skip to the interrupt name, e.g. 'timer' */
 365                         p = strchr(p, ' ');
 366                         if (!p)
 367                                 continue;
 368                         p = skip_whitespace(p);
 369                 }
 370
 371                 name = p;
 372                 chomp(p);
 373                 /* Save description of the interrupt */
 374                 if (nr >= 20000)
 375                         sprintf(irq_desc, "   <kernel IPI> : %s", name);
 376                 else
 377                         sprintf(irq_desc, "    <interrupt> : %s", name);
 378
 379                 delta = save_irq_count(nr, count);
 380
 381                 /* Skip per CPU timer interrupts */
 382                 if (is_hpet_irq(name))
 383                         continue;
 384
 385                 if (nr != 0 && delta != 0)
 386                         save_line(irq_desc, delta);
 387
 388                 if (nr == 0)
 389                         G.interrupt_0 = delta;
 390                 else
 391                         G.total_interrupt += delta;
 392         }
 393
 394         fclose(fp);
 395 }
 396 #else /* !ENABLE_FEATURE_POWERTOP_PROCIRQ */
 397 # define process_irq_counts()  ((void)0)
 398 #endif
 399
 400 static NOINLINE int process_timer_stats(void)
 401 {
 402         char buf[128];
 403         char line[15 + 3 + 128];
 404         int n;
 405         FILE *fp;
 406
 407         buf[0] = '\0';
 408
 409         n = 0;
 410         fp = NULL;
 411         if (!G.cant_enable_timer_stats)
 412                 fp = fopen_for_read("/proc/timer_stats");
 413         if (fp) {
 414 // Example file contents:
 415 // Timer Stats Version: v0.2
 416 // Sample period: 1.329 s
 417 //    76,     0 swapper          hrtimer_start_range_ns (tick_sched_timer)
 418 //    88,     0 swapper          hrtimer_start_range_ns (tick_sched_timer)
 419 //    24,  3787 firefox          hrtimer_start_range_ns (hrtimer_wakeup)
 420 //   46D,  1136 kondemand/1      do_dbs_timer (delayed_work_timer_fn)
 421 // ...
 422 //     1,  1656 Xorg             hrtimer_start_range_ns (hrtimer_wakeup)
 423 //     1,  2159 udisks-daemon    hrtimer_start_range_ns (hrtimer_wakeup)
 424 // 331 total events, 249.059 events/sec
 425                 while (fgets(buf, sizeof(buf), fp)) {
 426                         const char *count, *process, *func;
 427                         char *p;
 428                         int idx;
 429                         unsigned cnt;
 430
 431                         count = skip_whitespace(buf);
 432                         p = strchr(count, ',');
 433                         if (!p)
 434                                 continue;
 435                         *p++ = '\0';
 436                         cnt = bb_strtou(count, NULL, 10);
 437                         if (strcmp(skip_non_whitespace(count), " total events") == 0) {
 438 #if ENABLE_FEATURE_POWERTOP_PROCIRQ
 439                                 n = cnt / G.total_cpus;
 440                                 if (n > 0 && n < G.interrupt_0) {
 441                                         sprintf(line, "    <interrupt> : %s", "extra timer interrupt");
 442                                         save_line(line, G.interrupt_0 - n);
 443                                 }
 444 #endif
 445                                 break;
 446                         }
 447                         if (strchr(count, 'D'))
 448                                 continue; /* deferred */
 449                         p = skip_whitespace(p); /* points to pid now */
 450                         process = NULL;
 451  get_func_name:
 452                         p = strchr(p, ' ');
 453                         if (!p)
 454                                 continue;
 455                         *p++ = '\0';
 456                         p = skip_whitespace(p);
 457                         if (process == NULL) {
 458                                 process = p;
 459                                 goto get_func_name;
 460                         }
 461                         func = p;
 462
 463                         //if (strcmp(process, "swapper") == 0
 464                         // && strcmp(func, "hrtimer_start_range_ns (tick_sched_timer)\n") == 0
 465                         //) {
 466                         //      process = "[kernel scheduler]";
 467                         //      func = "Load balancing tick";
 468                         //}
 469
 470                         if (is_prefixed_with(func, "tick_nohz_"))
 471                                 continue;
 472                         if (is_prefixed_with(func, "tick_setup_sched_timer"))
 473                                 continue;
 474                         //if (strcmp(process, "powertop") == 0)
 475                         //      continue;
 476
 477                         idx = index_in_strings("insmod\0modprobe\0swapper\0", process);
 478                         if (idx != -1) {
 479                                 process = idx < 2 ? "[kernel module]" : "<kernel core>";
 480                         }
 481
 482                         chomp(p);
 483
 484                         // 46D\01136\0kondemand/1\0do_dbs_timer (delayed_work_timer_fn)
 485                         // ^          ^            ^
 486                         // count      process      func
 487
 488                         //if (strchr(process, '['))
 489                                 sprintf(line, "%15.15s : %s", process, func);
 490                         //else
 491                         //      sprintf(line, "%s", process);
 492                         save_line(line, cnt);
 493                 }
 494                 fclose(fp);
 495         }
 496
 497         return n;
 498 }
 499
 500 #ifdef __i386__
 501 /*
 502  * Get information about CPU using CPUID opcode.
 503  */
 504 static void cpuid(unsigned int *eax, unsigned int *ebx, unsigned int *ecx,
 505                                 unsigned int *edx)
 506 {
 507         /* EAX value specifies what information to return */
 508         __asm__(
 509                 "       pushl %%ebx\n"     /* Save EBX */
 510                 "       cpuid\n"
 511                 "       movl %%ebx, %1\n"  /* Save content of EBX */
 512                 "       popl %%ebx\n"      /* Restore EBX */
 513                 : "=a"(*eax), /* Output */
 514                   "=r"(*ebx),
 515                   "=c"(*ecx),
 516                   "=d"(*edx)
 517                 : "0"(*eax),  /* Input */
 518                   "1"(*ebx),
 519                   "2"(*ecx),
 520                   "3"(*edx)
 521                 /* No clobbered registers */
 522         );
 523 }
 524 #endif
 525
 526 #ifdef __i386__
 527 static NOINLINE void print_intel_cstates(void)
 528 {
 529         int bios_table[8] = { 0 };
 530         int nbios = 0;
 531         DIR *cpudir;
 532         struct dirent *d;
 533         int i;
 534         unsigned eax, ebx, ecx, edx;
 535
 536         cpudir = opendir("/sys/devices/system/cpu");
 537         if (!cpudir)
 538                 return;
 539
 540         /* Loop over cpuN entries */
 541         while ((d = readdir(cpudir)) != NULL) {
 542                 DIR *dir;
 543                 int len;
 544                 char fname[sizeof("/sys/devices/system/cpu//cpuidle//desc") + 2*BIG_SYSNAME_LEN];
 545
 546                 len = strlen(d->d_name);
 547                 if (len < 3 || len > BIG_SYSNAME_LEN)
 548                         continue;
 549
 550                 if (!isdigit(d->d_name[3]))
 551                         continue;
 552
 553                 len = sprintf(fname, "%s/%s/cpuidle", "/sys/devices/system/cpu", d->d_name);
 554                 dir = opendir(fname);
 555                 if (!dir)
 556                         continue;
 557
 558                 /*
 559                  * Every C-state has its own stateN directory, that
 560                  * contains a 'time' and a 'usage' file.
 561                  */
 562                 while ((d = readdir(dir)) != NULL) {
 563                         FILE *fp;
 564                         char buf[64];
 565                         int n;
 566
 567                         n = strlen(d->d_name);
 568                         if (n < 3 || n > BIG_SYSNAME_LEN)
 569                                 continue;
 570
 571                         sprintf(fname + len, "/%s/desc", d->d_name);
 572                         fp = fopen_for_read(fname);
 573                         if (fp) {
 574                                 char *p = fgets(buf, sizeof(buf), fp);
 575                                 fclose(fp);
 576                                 if (!p)
 577                                         break;
 578                                 p = strstr(p, "MWAIT ");
 579                                 if (p) {
 580                                         int pos;
 581                                         p += sizeof("MWAIT ") - 1;
 582                                         pos = (bb_strtoull(p, NULL, 16) >> 4) + 1;
 583                                         if (pos >= ARRAY_SIZE(bios_table))
 584                                                 continue;
 585                                         bios_table[pos]++;
 586                                         nbios++;
 587                                 }
 588                         }
 589                 }
 590                 closedir(dir);
 591         }
 592         closedir(cpudir);
 593
 594         if (!nbios)
 595                 return;
 596
 597         eax = 5;
 598         ebx = ecx = edx = 0;
 599         cpuid(&eax, &ebx, &ecx, &edx);
 600         if (!edx || !(ecx & 1))
 601                 return;
 602
 603         printf("Your %s the following C-states: ", "CPU supports");
 604         i = 0;
 605         while (edx) {
 606                 if (edx & 7)
 607                         printf("C%u ", i);
 608                 edx >>= 4;
 609                 i++;
 610         }
 611         bb_putchar('\n');
 612
 613         /* Print BIOS C-States */
 614         printf("Your %s the following C-states: ", "BIOS reports");
 615         for (i = 0; i < ARRAY_SIZE(bios_table); i++)
 616                 if (bios_table[i])
 617                         printf("C%u ", i);
 618
 619         bb_putchar('\n');
 620 }
 621 #else
 622 # define print_intel_cstates() ((void)0)
 623 #endif
 624
 625 static void show_timerstats(void)
 626 {
 627         unsigned lines;
 628
 629         /* Get terminal height */
 630         get_terminal_width_height(STDOUT_FILENO, NULL, &lines);
 631
 632         /* We don't have whole terminal just for timerstats */
 633         lines -= 12;
 634
 635         if (!G.cant_enable_timer_stats) {
 636                 int i, n = 0;
 637                 char strbuf6[6];
 638
 639                 puts("\nTop causes for wakeups:");
 640                 for (i = 0; i < G.lines_cnt; i++) {
 641                         if ((G.lines[i].count > 0 /*|| G.lines[i].disk_count > 0*/)
 642                          && n++ < lines
 643                         ) {
 644                                 /* NB: upstream powertop prints "(wakeups/sec)",
 645                                  * we print just "(wakeup counts)".
 646                                  */
 647                                 /*char c = ' ';
 648                                 if (G.lines[i].disk_count)
 649                                         c = 'D';*/
 650                                 smart_ulltoa5(G.lines[i].count, strbuf6, " KMGTPEZY")[0] = '\0';
 651                                 printf(/*" %5.1f%% (%s)%c  %s\n"*/
 652                                         " %5.1f%% (%s)   %s\n",
 653                                         G.lines[i].count * 100.0 / G.lines_cumulative_count,
 654                                         strbuf6, /*c,*/
 655                                         G.lines[i].string);
 656                         }
 657                 }
 658         } else {
 659                 bb_putchar('\n');
 660                 bb_simple_error_msg("no stats available; run as root or"
 661                                 " enable the timer_stats module");
 662         }
 663 }
 664
 665 // Example display from powertop version 1.11
 666 // Cn                Avg residency       P-states (frequencies)
 667 // C0 (cpu running)        ( 0.5%)         2.00 Ghz     0.0%
 668 // polling           0.0ms ( 0.0%)         1.67 Ghz     0.0%
 669 // C1 mwait          0.0ms ( 0.0%)         1333 Mhz     0.1%
 670 // C2 mwait          0.1ms ( 0.1%)         1000 Mhz    99.9%
 671 // C3 mwait         12.1ms (99.4%)
 672 //
 673 // Wakeups-from-idle per second : 93.6     interval: 15.0s
 674 // no ACPI power usage estimate available
 675 //
 676 // Top causes for wakeups:
 677 //   32.4% ( 26.7)       <interrupt> : extra timer interrupt
 678 //   29.0% ( 23.9)     <kernel core> : hrtimer_start_range_ns (tick_sched_timer)
 679 //    9.0% (  7.5)     <kernel core> : hrtimer_start (tick_sched_timer)
 680 //    6.5% (  5.3)       <interrupt> : ata_piix
 681 //    5.0% (  4.1)             inetd : hrtimer_start_range_ns (hrtimer_wakeup)
 682
 683 //usage:#define powertop_trivial_usage
 684 //usage:       ""
 685 //usage:#define powertop_full_usage "\n\n"
 686 //usage:       "Analyze power consumption on Intel-based laptops"
 687
 688 int powertop_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
 689 int powertop_main(int argc UNUSED_PARAM, char UNUSED_PARAM **argv)
 690 {
 691         ullong cur_usage[MAX_CSTATE_COUNT];
 692         ullong cur_duration[MAX_CSTATE_COUNT];
 693         char cstate_lines[MAX_CSTATE_COUNT + 2][64];
 694 #if ENABLE_FEATURE_POWERTOP_INTERACTIVE
 695         struct pollfd pfd[1];
 696
 697         pfd[0].fd = 0;
 698         pfd[0].events = POLLIN;
 699 #endif
 700
 701         INIT_G();
 702
 703 #if ENABLE_FEATURE_POWERTOP_PROCIRQ && BLOATY_HPET_IRQ_NUM_DETECTION
 704         G.percpu_hpet_start = INT_MAX;
 705         G.percpu_hpet_end = INT_MIN;
 706 #endif
 707
 708         /* Print warning when we don't have superuser privileges */
 709         if (geteuid() != 0)
 710                 bb_simple_error_msg("run as root to collect enough information");
 711
 712         /* Get number of CPUs */
 713         G.total_cpus = get_cpu_count();
 714
 715         puts("Collecting data for "DEFAULT_SLEEP_STR" seconds");
 716
 717 #if ENABLE_FEATURE_POWERTOP_INTERACTIVE
 718         /* Turn on unbuffered input; turn off echoing, ^C ^Z etc */
 719         set_termios_to_raw(STDIN_FILENO, &G.init_settings, TERMIOS_CLEAR_ISIG);
 720         bb_signals(BB_FATAL_SIGS, sig_handler);
 721         /* So we don't forget to reset term settings */
 722         die_func = reset_term;
 723 #endif
 724
 725         /* Collect initial data */
 726         process_irq_counts();
 727
 728         /* Read initial usage and duration */
 729         read_cstate_counts(G.start_usage, G.start_duration);
 730
 731         /* Copy them to "last" */
 732         memcpy(G.last_usage, G.start_usage, sizeof(G.last_usage));
 733         memcpy(G.last_duration, G.start_duration, sizeof(G.last_duration));
 734
 735         /* Display C-states */
 736         print_intel_cstates();
 737
 738         G.cant_enable_timer_stats |= stop_timer(); /* 1 on error */
 739
 740         /* The main loop */
 741         for (;;) {
 742                 //double maxsleep = 0.0;
 743                 ullong totalticks, totalevents;
 744                 int i;
 745
 746                 G.cant_enable_timer_stats |= start_timer(); /* 1 on error */
 747 #if !ENABLE_FEATURE_POWERTOP_INTERACTIVE
 748                 sleep(DEFAULT_SLEEP);
 749 #else
 750                 if (safe_poll(pfd, 1, DEFAULT_SLEEP * 1000) > 0) {
 751                         unsigned char c;
 752                         if (safe_read(STDIN_FILENO, &c, 1) != 1)
 753                                 break; /* EOF/error */
 754                         if (c == G.init_settings.c_cc[VINTR])
 755                                 break; /* ^C */
 756                         if ((c | 0x20) == 'q')
 757                                 break;
 758                 }
 759 #endif
 760                 G.cant_enable_timer_stats |= stop_timer(); /* 1 on error */
 761
 762                 clear_lines();
 763                 process_irq_counts();
 764
 765                 /* Clear the stats */
 766                 memset(cur_duration, 0, sizeof(cur_duration));
 767                 memset(cur_usage, 0, sizeof(cur_usage));
 768
 769                 /* Read them */
 770                 read_cstate_counts(cur_usage, cur_duration);
 771
 772                 /* Count totalticks and totalevents */
 773                 totalticks = totalevents = 0;
 774                 for (i = 0; i < MAX_CSTATE_COUNT; i++) {
 775                         if (cur_usage[i] != 0) {
 776                                 totalticks += cur_duration[i] - G.last_duration[i];
 777                                 totalevents += cur_usage[i] - G.last_usage[i];
 778                         }
 779                 }
 780
 781                 /* Home; clear screen */
 782                 printf(ESC"[H" ESC"[J");
 783
 784                 /* Clear C-state lines */
 785                 memset(&cstate_lines, 0, sizeof(cstate_lines));
 786
 787                 if (totalevents == 0 && G.maxcstate <= 1) {
 788                         /* This should not happen */
 789                         strcpy(cstate_lines[0], "C-state information is not available\n");
 790                 } else {
 791                         double percentage;
 792                         unsigned newticks;
 793
 794                         newticks = G.total_cpus * DEFAULT_SLEEP * FREQ_ACPI_1000 - totalticks;
 795                         /* Handle rounding errors: do not display negative values */
 796                         if ((int)newticks < 0)
 797                                 newticks = 0;
 798
 799                         sprintf(cstate_lines[0], "Cn\t\t  Avg residency\n");
 800                         percentage = newticks * 100.0 / (G.total_cpus * DEFAULT_SLEEP * FREQ_ACPI_1000);
 801                         sprintf(cstate_lines[1], "C0 (cpu running)        (%4.1f%%)\n", percentage);
 802
 803                         /* Compute values for individual C-states */
 804                         for (i = 0; i < MAX_CSTATE_COUNT; i++) {
 805                                 if (cur_usage[i] != 0) {
 806                                         double slept;
 807                                         slept = (cur_duration[i] - G.last_duration[i])
 808                                                 / (cur_usage[i] - G.last_usage[i] + 0.1) / FREQ_ACPI;
 809                                         percentage = (cur_duration[i] - G.last_duration[i]) * 100
 810                                                 / (G.total_cpus * DEFAULT_SLEEP * FREQ_ACPI_1000);
 811                                         sprintf(cstate_lines[i + 2], "C%u\t\t%5.1fms (%4.1f%%)\n",
 812                                                 i + 1, slept, percentage);
 813                                         //if (maxsleep < slept)
 814                                         //      maxsleep = slept;
 815                                 }
 816                         }
 817                 }
 818
 819                 for (i = 0; i < MAX_CSTATE_COUNT + 2; i++)
 820                         if (cstate_lines[i][0])
 821                                 fputs(cstate_lines[i], stdout);
 822
 823                 i = process_timer_stats();
 824 #if ENABLE_FEATURE_POWERTOP_PROCIRQ
 825                 if (totalevents == 0) {
 826                         /* No C-state info available, use timerstats */
 827                         totalevents = i * G.total_cpus + G.total_interrupt;
 828                         if (i < 0)
 829                                 totalevents += G.interrupt_0 - i;
 830                 }
 831 #endif
 832                 /* Upstream powertop prints wakeups per sec per CPU,
 833                  * we print just raw wakeup counts.
 834                  */
 835 //TODO: show real seconds (think about manual refresh)
 836                 printf("\nWakeups-from-idle in %u seconds: %llu\n",
 837                         DEFAULT_SLEEP,
 838                         totalevents
 839                 );
 840
 841                 update_lines_cumulative_count();
 842                 sort_lines();
 843                 show_timerstats();
 844                 fflush(stdout);
 845
 846                 /* Clear the stats */
 847                 memset(cur_duration, 0, sizeof(cur_duration));
 848                 memset(cur_usage, 0, sizeof(cur_usage));
 849
 850                 /* Get new values */
 851                 read_cstate_counts(cur_usage, cur_duration);
 852
 853                 /* Save them */
 854                 memcpy(G.last_usage, cur_usage, sizeof(G.last_usage));
 855                 memcpy(G.last_duration, cur_duration, sizeof(G.last_duration));
 856         } /* for (;;) */
 857
 858         bb_putchar('\n');
 859 #if ENABLE_FEATURE_POWERTOP_INTERACTIVE
 860         reset_term();
 861 #endif
 862
 863         return EXIT_SUCCESS;
 864 }