Linux-libre 5.4.47-gnu
[librecmc/linux-libre.git] / kernel / irq / autoprobe.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
4  *
5  * This file contains the interrupt probing code and driver APIs.
6  */
7
8 #include <linux/irq.h>
9 #include <linux/module.h>
10 #include <linux/interrupt.h>
11 #include <linux/delay.h>
12 #include <linux/async.h>
13
14 #include "internals.h"
15
16 /*
17  * Autodetection depends on the fact that any interrupt that
18  * comes in on to an unassigned handler will get stuck with
19  * "IRQS_WAITING" cleared and the interrupt disabled.
20  */
21 static DEFINE_MUTEX(probing_active);
22
23 /**
24  *      probe_irq_on    - begin an interrupt autodetect
25  *
26  *      Commence probing for an interrupt. The interrupts are scanned
27  *      and a mask of potential interrupt lines is returned.
28  *
29  */
30 unsigned long probe_irq_on(void)
31 {
32         struct irq_desc *desc;
33         unsigned long mask = 0;
34         int i;
35
36         /*
37          * quiesce the kernel, or at least the asynchronous portion
38          */
39         async_synchronize_full();
40         mutex_lock(&probing_active);
41         /*
42          * something may have generated an irq long ago and we want to
43          * flush such a longstanding irq before considering it as spurious.
44          */
45         for_each_irq_desc_reverse(i, desc) {
46                 raw_spin_lock_irq(&desc->lock);
47                 if (!desc->action && irq_settings_can_probe(desc)) {
48                         /*
49                          * Some chips need to know about probing in
50                          * progress:
51                          */
52                         if (desc->irq_data.chip->irq_set_type)
53                                 desc->irq_data.chip->irq_set_type(&desc->irq_data,
54                                                          IRQ_TYPE_PROBE);
55                         irq_activate_and_startup(desc, IRQ_NORESEND);
56                 }
57                 raw_spin_unlock_irq(&desc->lock);
58         }
59
60         /* Wait for longstanding interrupts to trigger. */
61         msleep(20);
62
63         /*
64          * enable any unassigned irqs
65          * (we must startup again here because if a longstanding irq
66          * happened in the previous stage, it may have masked itself)
67          */
68         for_each_irq_desc_reverse(i, desc) {
69                 raw_spin_lock_irq(&desc->lock);
70                 if (!desc->action && irq_settings_can_probe(desc)) {
71                         desc->istate |= IRQS_AUTODETECT | IRQS_WAITING;
72                         if (irq_activate_and_startup(desc, IRQ_NORESEND))
73                                 desc->istate |= IRQS_PENDING;
74                 }
75                 raw_spin_unlock_irq(&desc->lock);
76         }
77
78         /*
79          * Wait for spurious interrupts to trigger
80          */
81         msleep(100);
82
83         /*
84          * Now filter out any obviously spurious interrupts
85          */
86         for_each_irq_desc(i, desc) {
87                 raw_spin_lock_irq(&desc->lock);
88
89                 if (desc->istate & IRQS_AUTODETECT) {
90                         /* It triggered already - consider it spurious. */
91                         if (!(desc->istate & IRQS_WAITING)) {
92                                 desc->istate &= ~IRQS_AUTODETECT;
93                                 irq_shutdown_and_deactivate(desc);
94                         } else
95                                 if (i < 32)
96                                         mask |= 1 << i;
97                 }
98                 raw_spin_unlock_irq(&desc->lock);
99         }
100
101         return mask;
102 }
103 EXPORT_SYMBOL(probe_irq_on);
104
105 /**
106  *      probe_irq_mask - scan a bitmap of interrupt lines
107  *      @val:   mask of interrupts to consider
108  *
109  *      Scan the interrupt lines and return a bitmap of active
110  *      autodetect interrupts. The interrupt probe logic state
111  *      is then returned to its previous value.
112  *
113  *      Note: we need to scan all the irq's even though we will
114  *      only return autodetect irq numbers - just so that we reset
115  *      them all to a known state.
116  */
117 unsigned int probe_irq_mask(unsigned long val)
118 {
119         unsigned int mask = 0;
120         struct irq_desc *desc;
121         int i;
122
123         for_each_irq_desc(i, desc) {
124                 raw_spin_lock_irq(&desc->lock);
125                 if (desc->istate & IRQS_AUTODETECT) {
126                         if (i < 16 && !(desc->istate & IRQS_WAITING))
127                                 mask |= 1 << i;
128
129                         desc->istate &= ~IRQS_AUTODETECT;
130                         irq_shutdown_and_deactivate(desc);
131                 }
132                 raw_spin_unlock_irq(&desc->lock);
133         }
134         mutex_unlock(&probing_active);
135
136         return mask & val;
137 }
138 EXPORT_SYMBOL(probe_irq_mask);
139
140 /**
141  *      probe_irq_off   - end an interrupt autodetect
142  *      @val: mask of potential interrupts (unused)
143  *
144  *      Scans the unused interrupt lines and returns the line which
145  *      appears to have triggered the interrupt. If no interrupt was
146  *      found then zero is returned. If more than one interrupt is
147  *      found then minus the first candidate is returned to indicate
148  *      their is doubt.
149  *
150  *      The interrupt probe logic state is returned to its previous
151  *      value.
152  *
153  *      BUGS: When used in a module (which arguably shouldn't happen)
154  *      nothing prevents two IRQ probe callers from overlapping. The
155  *      results of this are non-optimal.
156  */
157 int probe_irq_off(unsigned long val)
158 {
159         int i, irq_found = 0, nr_of_irqs = 0;
160         struct irq_desc *desc;
161
162         for_each_irq_desc(i, desc) {
163                 raw_spin_lock_irq(&desc->lock);
164
165                 if (desc->istate & IRQS_AUTODETECT) {
166                         if (!(desc->istate & IRQS_WAITING)) {
167                                 if (!nr_of_irqs)
168                                         irq_found = i;
169                                 nr_of_irqs++;
170                         }
171                         desc->istate &= ~IRQS_AUTODETECT;
172                         irq_shutdown_and_deactivate(desc);
173                 }
174                 raw_spin_unlock_irq(&desc->lock);
175         }
176         mutex_unlock(&probing_active);
177
178         if (nr_of_irqs > 1)
179                 irq_found = -irq_found;
180
181         return irq_found;
182 }
183 EXPORT_SYMBOL(probe_irq_off);
184