Linux-libre 4.9.30-gnu
[librecmc/linux-libre.git] / include / uapi / linux / batman_adv.h
1 /* Copyright (C) 2016 B.A.T.M.A.N. contributors:
2  *
3  * Matthias Schiffer
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17
18 #ifndef _UAPI_LINUX_BATMAN_ADV_H_
19 #define _UAPI_LINUX_BATMAN_ADV_H_
20
21 #define BATADV_NL_NAME "batadv"
22
23 #define BATADV_NL_MCAST_GROUP_TPMETER   "tpmeter"
24
25 /**
26  * enum batadv_tt_client_flags - TT client specific flags
27  * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
28  * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and the new
29  *  update telling its new real location has not been received/sent yet
30  * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi interface.
31  *  This information is used by the "AP Isolation" feature
32  * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
33  *  information is used by the Extended Isolation feature
34  * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from the table
35  * @BATADV_TT_CLIENT_NEW: this client has been added to the local table but has
36  *  not been announced yet
37  * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it is kept
38  *  in the table for one more originator interval for consistency purposes
39  * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be part of
40  *  the network but no nnode has already announced it
41  *
42  * Bits from 0 to 7 are called _remote flags_ because they are sent on the wire.
43  * Bits from 8 to 15 are called _local flags_ because they are used for local
44  * computations only.
45  *
46  * Bits from 4 to 7 - a subset of remote flags - are ensured to be in sync with
47  * the other nodes in the network. To achieve this goal these flags are included
48  * in the TT CRC computation.
49  */
50 enum batadv_tt_client_flags {
51         BATADV_TT_CLIENT_DEL     = (1 << 0),
52         BATADV_TT_CLIENT_ROAM    = (1 << 1),
53         BATADV_TT_CLIENT_WIFI    = (1 << 4),
54         BATADV_TT_CLIENT_ISOLA   = (1 << 5),
55         BATADV_TT_CLIENT_NOPURGE = (1 << 8),
56         BATADV_TT_CLIENT_NEW     = (1 << 9),
57         BATADV_TT_CLIENT_PENDING = (1 << 10),
58         BATADV_TT_CLIENT_TEMP    = (1 << 11),
59 };
60
61 /**
62  * enum batadv_nl_attrs - batman-adv netlink attributes
63  *
64  * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
65  * @BATADV_ATTR_VERSION: batman-adv version string
66  * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
67  * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
68  * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
69  * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
70  * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
71  * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
72  * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv interface
73  * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
74  * @BATADV_ATTR_TPMETER_RESULT: result of run (see batadv_tp_meter_status)
75  * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
76  * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
77  * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
78  * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
79  * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
80  * @BATADV_ATTR_TT_ADDRESS: Client MAC address
81  * @BATADV_ATTR_TT_TTVN: Translation table version
82  * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
83  * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
84  * @BATADV_ATTR_TT_VID: VLAN ID
85  * @BATADV_ATTR_TT_FLAGS: Translation table client flags
86  * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
87  * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
88  * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
89  * @BATADV_ATTR_TQ: TQ to neighbour
90  * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
91  * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
92  * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
93  * @BATADV_ATTR_ROUTER: Gateway router MAC address
94  * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
95  * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
96  * @BATADV_ATTR_BLA_VID: BLA VLAN ID
97  * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
98  * @BATADV_ATTR_BLA_CRC: BLA CRC
99  * @__BATADV_ATTR_AFTER_LAST: internal use
100  * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
101  * @BATADV_ATTR_MAX: highest attribute number currently defined
102  */
103 enum batadv_nl_attrs {
104         BATADV_ATTR_UNSPEC,
105         BATADV_ATTR_VERSION,
106         BATADV_ATTR_ALGO_NAME,
107         BATADV_ATTR_MESH_IFINDEX,
108         BATADV_ATTR_MESH_IFNAME,
109         BATADV_ATTR_MESH_ADDRESS,
110         BATADV_ATTR_HARD_IFINDEX,
111         BATADV_ATTR_HARD_IFNAME,
112         BATADV_ATTR_HARD_ADDRESS,
113         BATADV_ATTR_ORIG_ADDRESS,
114         BATADV_ATTR_TPMETER_RESULT,
115         BATADV_ATTR_TPMETER_TEST_TIME,
116         BATADV_ATTR_TPMETER_BYTES,
117         BATADV_ATTR_TPMETER_COOKIE,
118         BATADV_ATTR_PAD,
119         BATADV_ATTR_ACTIVE,
120         BATADV_ATTR_TT_ADDRESS,
121         BATADV_ATTR_TT_TTVN,
122         BATADV_ATTR_TT_LAST_TTVN,
123         BATADV_ATTR_TT_CRC32,
124         BATADV_ATTR_TT_VID,
125         BATADV_ATTR_TT_FLAGS,
126         BATADV_ATTR_FLAG_BEST,
127         BATADV_ATTR_LAST_SEEN_MSECS,
128         BATADV_ATTR_NEIGH_ADDRESS,
129         BATADV_ATTR_TQ,
130         BATADV_ATTR_THROUGHPUT,
131         BATADV_ATTR_BANDWIDTH_UP,
132         BATADV_ATTR_BANDWIDTH_DOWN,
133         BATADV_ATTR_ROUTER,
134         BATADV_ATTR_BLA_OWN,
135         BATADV_ATTR_BLA_ADDRESS,
136         BATADV_ATTR_BLA_VID,
137         BATADV_ATTR_BLA_BACKBONE,
138         BATADV_ATTR_BLA_CRC,
139         /* add attributes above here, update the policy in netlink.c */
140         __BATADV_ATTR_AFTER_LAST,
141         NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST,
142         BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1
143 };
144
145 /**
146  * enum batadv_nl_commands - supported batman-adv netlink commands
147  *
148  * @BATADV_CMD_UNSPEC: unspecified command to catch errors
149  * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv device
150  * @BATADV_CMD_TP_METER: Start a tp meter session
151  * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
152  * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
153  * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
154  * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
155  * @BATADV_CMD_GET_TRANSTABLE_GLOBAL Query list of global translations
156  * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
157  * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
158  * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
159  * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
160  * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance backbones
161  * @__BATADV_CMD_AFTER_LAST: internal use
162  * @BATADV_CMD_MAX: highest used command number
163  */
164 enum batadv_nl_commands {
165         BATADV_CMD_UNSPEC,
166         BATADV_CMD_GET_MESH_INFO,
167         BATADV_CMD_TP_METER,
168         BATADV_CMD_TP_METER_CANCEL,
169         BATADV_CMD_GET_ROUTING_ALGOS,
170         BATADV_CMD_GET_HARDIFS,
171         BATADV_CMD_GET_TRANSTABLE_LOCAL,
172         BATADV_CMD_GET_TRANSTABLE_GLOBAL,
173         BATADV_CMD_GET_ORIGINATORS,
174         BATADV_CMD_GET_NEIGHBORS,
175         BATADV_CMD_GET_GATEWAYS,
176         BATADV_CMD_GET_BLA_CLAIM,
177         BATADV_CMD_GET_BLA_BACKBONE,
178         /* add new commands above here */
179         __BATADV_CMD_AFTER_LAST,
180         BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1
181 };
182
183 /**
184  * enum batadv_tp_meter_reason - reason of a tp meter test run stop
185  * @BATADV_TP_REASON_COMPLETE: sender finished tp run
186  * @BATADV_TP_REASON_CANCEL: sender was stopped during run
187  * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or didn't
188  *  answer
189  * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
190  * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node already
191  *  ongoing
192  * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
193  * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
194  * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
195  */
196 enum batadv_tp_meter_reason {
197         BATADV_TP_REASON_COMPLETE               = 3,
198         BATADV_TP_REASON_CANCEL                 = 4,
199         /* error status >= 128 */
200         BATADV_TP_REASON_DST_UNREACHABLE        = 128,
201         BATADV_TP_REASON_RESEND_LIMIT           = 129,
202         BATADV_TP_REASON_ALREADY_ONGOING        = 130,
203         BATADV_TP_REASON_MEMORY_ERROR           = 131,
204         BATADV_TP_REASON_CANT_SEND              = 132,
205         BATADV_TP_REASON_TOO_MANY               = 133,
206 };
207
208 #endif /* _UAPI_LINUX_BATMAN_ADV_H_ */