Linux-libre 3.4.28-gnu1
[librecmc/linux-libre.git] / fs / xfs / xfs_trans_buf.c
1 /*
2  * Copyright (c) 2000-2002,2005 Silicon Graphics, Inc.
3  * All Rights Reserved.
4  *
5  * This program is free software; you can redistribute it and/or
6  * modify it under the terms of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it would be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write the Free Software Foundation,
16  * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
17  */
18 #include "xfs.h"
19 #include "xfs_fs.h"
20 #include "xfs_types.h"
21 #include "xfs_bit.h"
22 #include "xfs_log.h"
23 #include "xfs_inum.h"
24 #include "xfs_trans.h"
25 #include "xfs_sb.h"
26 #include "xfs_ag.h"
27 #include "xfs_mount.h"
28 #include "xfs_bmap_btree.h"
29 #include "xfs_alloc_btree.h"
30 #include "xfs_ialloc_btree.h"
31 #include "xfs_dinode.h"
32 #include "xfs_inode.h"
33 #include "xfs_buf_item.h"
34 #include "xfs_trans_priv.h"
35 #include "xfs_error.h"
36 #include "xfs_rw.h"
37 #include "xfs_trace.h"
38
39 /*
40  * Check to see if a buffer matching the given parameters is already
41  * a part of the given transaction.
42  */
43 STATIC struct xfs_buf *
44 xfs_trans_buf_item_match(
45         struct xfs_trans        *tp,
46         struct xfs_buftarg      *target,
47         xfs_daddr_t             blkno,
48         int                     len)
49 {
50         struct xfs_log_item_desc *lidp;
51         struct xfs_buf_log_item *blip;
52
53         len = BBTOB(len);
54         list_for_each_entry(lidp, &tp->t_items, lid_trans) {
55                 blip = (struct xfs_buf_log_item *)lidp->lid_item;
56                 if (blip->bli_item.li_type == XFS_LI_BUF &&
57                     blip->bli_buf->b_target == target &&
58                     XFS_BUF_ADDR(blip->bli_buf) == blkno &&
59                     XFS_BUF_COUNT(blip->bli_buf) == len)
60                         return blip->bli_buf;
61         }
62
63         return NULL;
64 }
65
66 /*
67  * Add the locked buffer to the transaction.
68  *
69  * The buffer must be locked, and it cannot be associated with any
70  * transaction.
71  *
72  * If the buffer does not yet have a buf log item associated with it,
73  * then allocate one for it.  Then add the buf item to the transaction.
74  */
75 STATIC void
76 _xfs_trans_bjoin(
77         struct xfs_trans        *tp,
78         struct xfs_buf          *bp,
79         int                     reset_recur)
80 {
81         struct xfs_buf_log_item *bip;
82
83         ASSERT(bp->b_transp == NULL);
84
85         /*
86          * The xfs_buf_log_item pointer is stored in b_fsprivate.  If
87          * it doesn't have one yet, then allocate one and initialize it.
88          * The checks to see if one is there are in xfs_buf_item_init().
89          */
90         xfs_buf_item_init(bp, tp->t_mountp);
91         bip = bp->b_fspriv;
92         ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
93         ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL));
94         ASSERT(!(bip->bli_flags & XFS_BLI_LOGGED));
95         if (reset_recur)
96                 bip->bli_recur = 0;
97
98         /*
99          * Take a reference for this transaction on the buf item.
100          */
101         atomic_inc(&bip->bli_refcount);
102
103         /*
104          * Get a log_item_desc to point at the new item.
105          */
106         xfs_trans_add_item(tp, &bip->bli_item);
107
108         /*
109          * Initialize b_fsprivate2 so we can find it with incore_match()
110          * in xfs_trans_get_buf() and friends above.
111          */
112         bp->b_transp = tp;
113
114 }
115
116 void
117 xfs_trans_bjoin(
118         struct xfs_trans        *tp,
119         struct xfs_buf          *bp)
120 {
121         _xfs_trans_bjoin(tp, bp, 0);
122         trace_xfs_trans_bjoin(bp->b_fspriv);
123 }
124
125 /*
126  * Get and lock the buffer for the caller if it is not already
127  * locked within the given transaction.  If it is already locked
128  * within the transaction, just increment its lock recursion count
129  * and return a pointer to it.
130  *
131  * If the transaction pointer is NULL, make this just a normal
132  * get_buf() call.
133  */
134 xfs_buf_t *
135 xfs_trans_get_buf(xfs_trans_t   *tp,
136                   xfs_buftarg_t *target_dev,
137                   xfs_daddr_t   blkno,
138                   int           len,
139                   uint          flags)
140 {
141         xfs_buf_t               *bp;
142         xfs_buf_log_item_t      *bip;
143
144         if (flags == 0)
145                 flags = XBF_LOCK | XBF_MAPPED;
146
147         /*
148          * Default to a normal get_buf() call if the tp is NULL.
149          */
150         if (tp == NULL)
151                 return xfs_buf_get(target_dev, blkno, len,
152                                    flags | XBF_DONT_BLOCK);
153
154         /*
155          * If we find the buffer in the cache with this transaction
156          * pointer in its b_fsprivate2 field, then we know we already
157          * have it locked.  In this case we just increment the lock
158          * recursion count and return the buffer to the caller.
159          */
160         bp = xfs_trans_buf_item_match(tp, target_dev, blkno, len);
161         if (bp != NULL) {
162                 ASSERT(xfs_buf_islocked(bp));
163                 if (XFS_FORCED_SHUTDOWN(tp->t_mountp)) {
164                         xfs_buf_stale(bp);
165                         XFS_BUF_DONE(bp);
166                 }
167
168                 /*
169                  * If the buffer is stale then it was binval'ed
170                  * since last read.  This doesn't matter since the
171                  * caller isn't allowed to use the data anyway.
172                  */
173                 else if (XFS_BUF_ISSTALE(bp))
174                         ASSERT(!XFS_BUF_ISDELAYWRITE(bp));
175
176                 ASSERT(bp->b_transp == tp);
177                 bip = bp->b_fspriv;
178                 ASSERT(bip != NULL);
179                 ASSERT(atomic_read(&bip->bli_refcount) > 0);
180                 bip->bli_recur++;
181                 trace_xfs_trans_get_buf_recur(bip);
182                 return (bp);
183         }
184
185         /*
186          * We always specify the XBF_DONT_BLOCK flag within a transaction
187          * so that get_buf does not try to push out a delayed write buffer
188          * which might cause another transaction to take place (if the
189          * buffer was delayed alloc).  Such recursive transactions can
190          * easily deadlock with our current transaction as well as cause
191          * us to run out of stack space.
192          */
193         bp = xfs_buf_get(target_dev, blkno, len, flags | XBF_DONT_BLOCK);
194         if (bp == NULL) {
195                 return NULL;
196         }
197
198         ASSERT(!bp->b_error);
199
200         _xfs_trans_bjoin(tp, bp, 1);
201         trace_xfs_trans_get_buf(bp->b_fspriv);
202         return (bp);
203 }
204
205 /*
206  * Get and lock the superblock buffer of this file system for the
207  * given transaction.
208  *
209  * We don't need to use incore_match() here, because the superblock
210  * buffer is a private buffer which we keep a pointer to in the
211  * mount structure.
212  */
213 xfs_buf_t *
214 xfs_trans_getsb(xfs_trans_t     *tp,
215                 struct xfs_mount *mp,
216                 int             flags)
217 {
218         xfs_buf_t               *bp;
219         xfs_buf_log_item_t      *bip;
220
221         /*
222          * Default to just trying to lock the superblock buffer
223          * if tp is NULL.
224          */
225         if (tp == NULL) {
226                 return (xfs_getsb(mp, flags));
227         }
228
229         /*
230          * If the superblock buffer already has this transaction
231          * pointer in its b_fsprivate2 field, then we know we already
232          * have it locked.  In this case we just increment the lock
233          * recursion count and return the buffer to the caller.
234          */
235         bp = mp->m_sb_bp;
236         if (bp->b_transp == tp) {
237                 bip = bp->b_fspriv;
238                 ASSERT(bip != NULL);
239                 ASSERT(atomic_read(&bip->bli_refcount) > 0);
240                 bip->bli_recur++;
241                 trace_xfs_trans_getsb_recur(bip);
242                 return (bp);
243         }
244
245         bp = xfs_getsb(mp, flags);
246         if (bp == NULL)
247                 return NULL;
248
249         _xfs_trans_bjoin(tp, bp, 1);
250         trace_xfs_trans_getsb(bp->b_fspriv);
251         return (bp);
252 }
253
254 #ifdef DEBUG
255 xfs_buftarg_t *xfs_error_target;
256 int     xfs_do_error;
257 int     xfs_req_num;
258 int     xfs_error_mod = 33;
259 #endif
260
261 /*
262  * Get and lock the buffer for the caller if it is not already
263  * locked within the given transaction.  If it has not yet been
264  * read in, read it from disk. If it is already locked
265  * within the transaction and already read in, just increment its
266  * lock recursion count and return a pointer to it.
267  *
268  * If the transaction pointer is NULL, make this just a normal
269  * read_buf() call.
270  */
271 int
272 xfs_trans_read_buf(
273         xfs_mount_t     *mp,
274         xfs_trans_t     *tp,
275         xfs_buftarg_t   *target,
276         xfs_daddr_t     blkno,
277         int             len,
278         uint            flags,
279         xfs_buf_t       **bpp)
280 {
281         xfs_buf_t               *bp;
282         xfs_buf_log_item_t      *bip;
283         int                     error;
284
285         if (flags == 0)
286                 flags = XBF_LOCK | XBF_MAPPED;
287
288         /*
289          * Default to a normal get_buf() call if the tp is NULL.
290          */
291         if (tp == NULL) {
292                 bp = xfs_buf_read(target, blkno, len, flags | XBF_DONT_BLOCK);
293                 if (!bp)
294                         return (flags & XBF_TRYLOCK) ?
295                                         EAGAIN : XFS_ERROR(ENOMEM);
296
297                 if (bp->b_error) {
298                         error = bp->b_error;
299                         xfs_buf_ioerror_alert(bp, __func__);
300                         xfs_buf_relse(bp);
301                         return error;
302                 }
303 #ifdef DEBUG
304                 if (xfs_do_error) {
305                         if (xfs_error_target == target) {
306                                 if (((xfs_req_num++) % xfs_error_mod) == 0) {
307                                         xfs_buf_relse(bp);
308                                         xfs_debug(mp, "Returning error!");
309                                         return XFS_ERROR(EIO);
310                                 }
311                         }
312                 }
313 #endif
314                 if (XFS_FORCED_SHUTDOWN(mp))
315                         goto shutdown_abort;
316                 *bpp = bp;
317                 return 0;
318         }
319
320         /*
321          * If we find the buffer in the cache with this transaction
322          * pointer in its b_fsprivate2 field, then we know we already
323          * have it locked.  If it is already read in we just increment
324          * the lock recursion count and return the buffer to the caller.
325          * If the buffer is not yet read in, then we read it in, increment
326          * the lock recursion count, and return it to the caller.
327          */
328         bp = xfs_trans_buf_item_match(tp, target, blkno, len);
329         if (bp != NULL) {
330                 ASSERT(xfs_buf_islocked(bp));
331                 ASSERT(bp->b_transp == tp);
332                 ASSERT(bp->b_fspriv != NULL);
333                 ASSERT(!bp->b_error);
334                 if (!(XFS_BUF_ISDONE(bp))) {
335                         trace_xfs_trans_read_buf_io(bp, _RET_IP_);
336                         ASSERT(!XFS_BUF_ISASYNC(bp));
337                         XFS_BUF_READ(bp);
338                         xfsbdstrat(tp->t_mountp, bp);
339                         error = xfs_buf_iowait(bp);
340                         if (error) {
341                                 xfs_buf_ioerror_alert(bp, __func__);
342                                 xfs_buf_relse(bp);
343                                 /*
344                                  * We can gracefully recover from most read
345                                  * errors. Ones we can't are those that happen
346                                  * after the transaction's already dirty.
347                                  */
348                                 if (tp->t_flags & XFS_TRANS_DIRTY)
349                                         xfs_force_shutdown(tp->t_mountp,
350                                                         SHUTDOWN_META_IO_ERROR);
351                                 return error;
352                         }
353                 }
354                 /*
355                  * We never locked this buf ourselves, so we shouldn't
356                  * brelse it either. Just get out.
357                  */
358                 if (XFS_FORCED_SHUTDOWN(mp)) {
359                         trace_xfs_trans_read_buf_shut(bp, _RET_IP_);
360                         *bpp = NULL;
361                         return XFS_ERROR(EIO);
362                 }
363
364
365                 bip = bp->b_fspriv;
366                 bip->bli_recur++;
367
368                 ASSERT(atomic_read(&bip->bli_refcount) > 0);
369                 trace_xfs_trans_read_buf_recur(bip);
370                 *bpp = bp;
371                 return 0;
372         }
373
374         /*
375          * We always specify the XBF_DONT_BLOCK flag within a transaction
376          * so that get_buf does not try to push out a delayed write buffer
377          * which might cause another transaction to take place (if the
378          * buffer was delayed alloc).  Such recursive transactions can
379          * easily deadlock with our current transaction as well as cause
380          * us to run out of stack space.
381          */
382         bp = xfs_buf_read(target, blkno, len, flags | XBF_DONT_BLOCK);
383         if (bp == NULL) {
384                 *bpp = NULL;
385                 return (flags & XBF_TRYLOCK) ?
386                                         0 : XFS_ERROR(ENOMEM);
387         }
388         if (bp->b_error) {
389                 error = bp->b_error;
390                 xfs_buf_stale(bp);
391                 XFS_BUF_DONE(bp);
392                 xfs_buf_ioerror_alert(bp, __func__);
393                 if (tp->t_flags & XFS_TRANS_DIRTY)
394                         xfs_force_shutdown(tp->t_mountp, SHUTDOWN_META_IO_ERROR);
395                 xfs_buf_relse(bp);
396                 return error;
397         }
398 #ifdef DEBUG
399         if (xfs_do_error && !(tp->t_flags & XFS_TRANS_DIRTY)) {
400                 if (xfs_error_target == target) {
401                         if (((xfs_req_num++) % xfs_error_mod) == 0) {
402                                 xfs_force_shutdown(tp->t_mountp,
403                                                    SHUTDOWN_META_IO_ERROR);
404                                 xfs_buf_relse(bp);
405                                 xfs_debug(mp, "Returning trans error!");
406                                 return XFS_ERROR(EIO);
407                         }
408                 }
409         }
410 #endif
411         if (XFS_FORCED_SHUTDOWN(mp))
412                 goto shutdown_abort;
413
414         _xfs_trans_bjoin(tp, bp, 1);
415         trace_xfs_trans_read_buf(bp->b_fspriv);
416
417         *bpp = bp;
418         return 0;
419
420 shutdown_abort:
421         /*
422          * the theory here is that buffer is good but we're
423          * bailing out because the filesystem is being forcibly
424          * shut down.  So we should leave the b_flags alone since
425          * the buffer's not staled and just get out.
426          */
427 #if defined(DEBUG)
428         if (XFS_BUF_ISSTALE(bp) && XFS_BUF_ISDELAYWRITE(bp))
429                 xfs_notice(mp, "about to pop assert, bp == 0x%p", bp);
430 #endif
431         ASSERT((bp->b_flags & (XBF_STALE|XBF_DELWRI)) !=
432                                      (XBF_STALE|XBF_DELWRI));
433
434         trace_xfs_trans_read_buf_shut(bp, _RET_IP_);
435         xfs_buf_relse(bp);
436         *bpp = NULL;
437         return XFS_ERROR(EIO);
438 }
439
440
441 /*
442  * Release the buffer bp which was previously acquired with one of the
443  * xfs_trans_... buffer allocation routines if the buffer has not
444  * been modified within this transaction.  If the buffer is modified
445  * within this transaction, do decrement the recursion count but do
446  * not release the buffer even if the count goes to 0.  If the buffer is not
447  * modified within the transaction, decrement the recursion count and
448  * release the buffer if the recursion count goes to 0.
449  *
450  * If the buffer is to be released and it was not modified before
451  * this transaction began, then free the buf_log_item associated with it.
452  *
453  * If the transaction pointer is NULL, make this just a normal
454  * brelse() call.
455  */
456 void
457 xfs_trans_brelse(xfs_trans_t    *tp,
458                  xfs_buf_t      *bp)
459 {
460         xfs_buf_log_item_t      *bip;
461
462         /*
463          * Default to a normal brelse() call if the tp is NULL.
464          */
465         if (tp == NULL) {
466                 ASSERT(bp->b_transp == NULL);
467                 xfs_buf_relse(bp);
468                 return;
469         }
470
471         ASSERT(bp->b_transp == tp);
472         bip = bp->b_fspriv;
473         ASSERT(bip->bli_item.li_type == XFS_LI_BUF);
474         ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
475         ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL));
476         ASSERT(atomic_read(&bip->bli_refcount) > 0);
477
478         trace_xfs_trans_brelse(bip);
479
480         /*
481          * If the release is just for a recursive lock,
482          * then decrement the count and return.
483          */
484         if (bip->bli_recur > 0) {
485                 bip->bli_recur--;
486                 return;
487         }
488
489         /*
490          * If the buffer is dirty within this transaction, we can't
491          * release it until we commit.
492          */
493         if (bip->bli_item.li_desc->lid_flags & XFS_LID_DIRTY)
494                 return;
495
496         /*
497          * If the buffer has been invalidated, then we can't release
498          * it until the transaction commits to disk unless it is re-dirtied
499          * as part of this transaction.  This prevents us from pulling
500          * the item from the AIL before we should.
501          */
502         if (bip->bli_flags & XFS_BLI_STALE)
503                 return;
504
505         ASSERT(!(bip->bli_flags & XFS_BLI_LOGGED));
506
507         /*
508          * Free up the log item descriptor tracking the released item.
509          */
510         xfs_trans_del_item(&bip->bli_item);
511
512         /*
513          * Clear the hold flag in the buf log item if it is set.
514          * We wouldn't want the next user of the buffer to
515          * get confused.
516          */
517         if (bip->bli_flags & XFS_BLI_HOLD) {
518                 bip->bli_flags &= ~XFS_BLI_HOLD;
519         }
520
521         /*
522          * Drop our reference to the buf log item.
523          */
524         atomic_dec(&bip->bli_refcount);
525
526         /*
527          * If the buf item is not tracking data in the log, then
528          * we must free it before releasing the buffer back to the
529          * free pool.  Before releasing the buffer to the free pool,
530          * clear the transaction pointer in b_fsprivate2 to dissolve
531          * its relation to this transaction.
532          */
533         if (!xfs_buf_item_dirty(bip)) {
534 /***
535                 ASSERT(bp->b_pincount == 0);
536 ***/
537                 ASSERT(atomic_read(&bip->bli_refcount) == 0);
538                 ASSERT(!(bip->bli_item.li_flags & XFS_LI_IN_AIL));
539                 ASSERT(!(bip->bli_flags & XFS_BLI_INODE_ALLOC_BUF));
540                 xfs_buf_item_relse(bp);
541         }
542
543         bp->b_transp = NULL;
544         xfs_buf_relse(bp);
545 }
546
547 /*
548  * Mark the buffer as not needing to be unlocked when the buf item's
549  * IOP_UNLOCK() routine is called.  The buffer must already be locked
550  * and associated with the given transaction.
551  */
552 /* ARGSUSED */
553 void
554 xfs_trans_bhold(xfs_trans_t     *tp,
555                 xfs_buf_t       *bp)
556 {
557         xfs_buf_log_item_t      *bip = bp->b_fspriv;
558
559         ASSERT(bp->b_transp == tp);
560         ASSERT(bip != NULL);
561         ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
562         ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL));
563         ASSERT(atomic_read(&bip->bli_refcount) > 0);
564
565         bip->bli_flags |= XFS_BLI_HOLD;
566         trace_xfs_trans_bhold(bip);
567 }
568
569 /*
570  * Cancel the previous buffer hold request made on this buffer
571  * for this transaction.
572  */
573 void
574 xfs_trans_bhold_release(xfs_trans_t     *tp,
575                         xfs_buf_t       *bp)
576 {
577         xfs_buf_log_item_t      *bip = bp->b_fspriv;
578
579         ASSERT(bp->b_transp == tp);
580         ASSERT(bip != NULL);
581         ASSERT(!(bip->bli_flags & XFS_BLI_STALE));
582         ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_CANCEL));
583         ASSERT(atomic_read(&bip->bli_refcount) > 0);
584         ASSERT(bip->bli_flags & XFS_BLI_HOLD);
585
586         bip->bli_flags &= ~XFS_BLI_HOLD;
587         trace_xfs_trans_bhold_release(bip);
588 }
589
590 /*
591  * This is called to mark bytes first through last inclusive of the given
592  * buffer as needing to be logged when the transaction is committed.
593  * The buffer must already be associated with the given transaction.
594  *
595  * First and last are numbers relative to the beginning of this buffer,
596  * so the first byte in the buffer is numbered 0 regardless of the
597  * value of b_blkno.
598  */
599 void
600 xfs_trans_log_buf(xfs_trans_t   *tp,
601                   xfs_buf_t     *bp,
602                   uint          first,
603                   uint          last)
604 {
605         xfs_buf_log_item_t      *bip = bp->b_fspriv;
606
607         ASSERT(bp->b_transp == tp);
608         ASSERT(bip != NULL);
609         ASSERT((first <= last) && (last < XFS_BUF_COUNT(bp)));
610         ASSERT(bp->b_iodone == NULL ||
611                bp->b_iodone == xfs_buf_iodone_callbacks);
612
613         /*
614          * Mark the buffer as needing to be written out eventually,
615          * and set its iodone function to remove the buffer's buf log
616          * item from the AIL and free it when the buffer is flushed
617          * to disk.  See xfs_buf_attach_iodone() for more details
618          * on li_cb and xfs_buf_iodone_callbacks().
619          * If we end up aborting this transaction, we trap this buffer
620          * inside the b_bdstrat callback so that this won't get written to
621          * disk.
622          */
623         XFS_BUF_DONE(bp);
624
625         ASSERT(atomic_read(&bip->bli_refcount) > 0);
626         bp->b_iodone = xfs_buf_iodone_callbacks;
627         bip->bli_item.li_cb = xfs_buf_iodone;
628
629         xfs_buf_delwri_queue(bp);
630
631         trace_xfs_trans_log_buf(bip);
632
633         /*
634          * If we invalidated the buffer within this transaction, then
635          * cancel the invalidation now that we're dirtying the buffer
636          * again.  There are no races with the code in xfs_buf_item_unpin(),
637          * because we have a reference to the buffer this entire time.
638          */
639         if (bip->bli_flags & XFS_BLI_STALE) {
640                 bip->bli_flags &= ~XFS_BLI_STALE;
641                 ASSERT(XFS_BUF_ISSTALE(bp));
642                 XFS_BUF_UNSTALE(bp);
643                 bip->bli_format.blf_flags &= ~XFS_BLF_CANCEL;
644         }
645
646         tp->t_flags |= XFS_TRANS_DIRTY;
647         bip->bli_item.li_desc->lid_flags |= XFS_LID_DIRTY;
648         bip->bli_flags |= XFS_BLI_LOGGED;
649         xfs_buf_item_log(bip, first, last);
650 }
651
652
653 /*
654  * This called to invalidate a buffer that is being used within
655  * a transaction.  Typically this is because the blocks in the
656  * buffer are being freed, so we need to prevent it from being
657  * written out when we're done.  Allowing it to be written again
658  * might overwrite data in the free blocks if they are reallocated
659  * to a file.
660  *
661  * We prevent the buffer from being written out by clearing the
662  * B_DELWRI flag.  We can't always
663  * get rid of the buf log item at this point, though, because
664  * the buffer may still be pinned by another transaction.  If that
665  * is the case, then we'll wait until the buffer is committed to
666  * disk for the last time (we can tell by the ref count) and
667  * free it in xfs_buf_item_unpin().  Until it is cleaned up we
668  * will keep the buffer locked so that the buffer and buf log item
669  * are not reused.
670  */
671 void
672 xfs_trans_binval(
673         xfs_trans_t     *tp,
674         xfs_buf_t       *bp)
675 {
676         xfs_buf_log_item_t      *bip = bp->b_fspriv;
677
678         ASSERT(bp->b_transp == tp);
679         ASSERT(bip != NULL);
680         ASSERT(atomic_read(&bip->bli_refcount) > 0);
681
682         trace_xfs_trans_binval(bip);
683
684         if (bip->bli_flags & XFS_BLI_STALE) {
685                 /*
686                  * If the buffer is already invalidated, then
687                  * just return.
688                  */
689                 ASSERT(!(XFS_BUF_ISDELAYWRITE(bp)));
690                 ASSERT(XFS_BUF_ISSTALE(bp));
691                 ASSERT(!(bip->bli_flags & (XFS_BLI_LOGGED | XFS_BLI_DIRTY)));
692                 ASSERT(!(bip->bli_format.blf_flags & XFS_BLF_INODE_BUF));
693                 ASSERT(bip->bli_format.blf_flags & XFS_BLF_CANCEL);
694                 ASSERT(bip->bli_item.li_desc->lid_flags & XFS_LID_DIRTY);
695                 ASSERT(tp->t_flags & XFS_TRANS_DIRTY);
696                 return;
697         }
698
699         /*
700          * Clear the dirty bit in the buffer and set the STALE flag
701          * in the buf log item.  The STALE flag will be used in
702          * xfs_buf_item_unpin() to determine if it should clean up
703          * when the last reference to the buf item is given up.
704          * We set the XFS_BLF_CANCEL flag in the buf log format structure
705          * and log the buf item.  This will be used at recovery time
706          * to determine that copies of the buffer in the log before
707          * this should not be replayed.
708          * We mark the item descriptor and the transaction dirty so
709          * that we'll hold the buffer until after the commit.
710          *
711          * Since we're invalidating the buffer, we also clear the state
712          * about which parts of the buffer have been logged.  We also
713          * clear the flag indicating that this is an inode buffer since
714          * the data in the buffer will no longer be valid.
715          *
716          * We set the stale bit in the buffer as well since we're getting
717          * rid of it.
718          */
719         xfs_buf_stale(bp);
720         bip->bli_flags |= XFS_BLI_STALE;
721         bip->bli_flags &= ~(XFS_BLI_INODE_BUF | XFS_BLI_LOGGED | XFS_BLI_DIRTY);
722         bip->bli_format.blf_flags &= ~XFS_BLF_INODE_BUF;
723         bip->bli_format.blf_flags |= XFS_BLF_CANCEL;
724         memset((char *)(bip->bli_format.blf_data_map), 0,
725               (bip->bli_format.blf_map_size * sizeof(uint)));
726         bip->bli_item.li_desc->lid_flags |= XFS_LID_DIRTY;
727         tp->t_flags |= XFS_TRANS_DIRTY;
728 }
729
730 /*
731  * This call is used to indicate that the buffer contains on-disk inodes which
732  * must be handled specially during recovery.  They require special handling
733  * because only the di_next_unlinked from the inodes in the buffer should be
734  * recovered.  The rest of the data in the buffer is logged via the inodes
735  * themselves.
736  *
737  * All we do is set the XFS_BLI_INODE_BUF flag in the items flags so it can be
738  * transferred to the buffer's log format structure so that we'll know what to
739  * do at recovery time.
740  */
741 void
742 xfs_trans_inode_buf(
743         xfs_trans_t     *tp,
744         xfs_buf_t       *bp)
745 {
746         xfs_buf_log_item_t      *bip = bp->b_fspriv;
747
748         ASSERT(bp->b_transp == tp);
749         ASSERT(bip != NULL);
750         ASSERT(atomic_read(&bip->bli_refcount) > 0);
751
752         bip->bli_flags |= XFS_BLI_INODE_BUF;
753 }
754
755 /*
756  * This call is used to indicate that the buffer is going to
757  * be staled and was an inode buffer. This means it gets
758  * special processing during unpin - where any inodes 
759  * associated with the buffer should be removed from ail.
760  * There is also special processing during recovery,
761  * any replay of the inodes in the buffer needs to be
762  * prevented as the buffer may have been reused.
763  */
764 void
765 xfs_trans_stale_inode_buf(
766         xfs_trans_t     *tp,
767         xfs_buf_t       *bp)
768 {
769         xfs_buf_log_item_t      *bip = bp->b_fspriv;
770
771         ASSERT(bp->b_transp == tp);
772         ASSERT(bip != NULL);
773         ASSERT(atomic_read(&bip->bli_refcount) > 0);
774
775         bip->bli_flags |= XFS_BLI_STALE_INODE;
776         bip->bli_item.li_cb = xfs_buf_iodone;
777 }
778
779 /*
780  * Mark the buffer as being one which contains newly allocated
781  * inodes.  We need to make sure that even if this buffer is
782  * relogged as an 'inode buf' we still recover all of the inode
783  * images in the face of a crash.  This works in coordination with
784  * xfs_buf_item_committed() to ensure that the buffer remains in the
785  * AIL at its original location even after it has been relogged.
786  */
787 /* ARGSUSED */
788 void
789 xfs_trans_inode_alloc_buf(
790         xfs_trans_t     *tp,
791         xfs_buf_t       *bp)
792 {
793         xfs_buf_log_item_t      *bip = bp->b_fspriv;
794
795         ASSERT(bp->b_transp == tp);
796         ASSERT(bip != NULL);
797         ASSERT(atomic_read(&bip->bli_refcount) > 0);
798
799         bip->bli_flags |= XFS_BLI_INODE_ALLOC_BUF;
800 }
801
802
803 /*
804  * Similar to xfs_trans_inode_buf(), this marks the buffer as a cluster of
805  * dquots. However, unlike in inode buffer recovery, dquot buffers get
806  * recovered in their entirety. (Hence, no XFS_BLI_DQUOT_ALLOC_BUF flag).
807  * The only thing that makes dquot buffers different from regular
808  * buffers is that we must not replay dquot bufs when recovering
809  * if a _corresponding_ quotaoff has happened. We also have to distinguish
810  * between usr dquot bufs and grp dquot bufs, because usr and grp quotas
811  * can be turned off independently.
812  */
813 /* ARGSUSED */
814 void
815 xfs_trans_dquot_buf(
816         xfs_trans_t     *tp,
817         xfs_buf_t       *bp,
818         uint            type)
819 {
820         xfs_buf_log_item_t      *bip = bp->b_fspriv;
821
822         ASSERT(bp->b_transp == tp);
823         ASSERT(bip != NULL);
824         ASSERT(type == XFS_BLF_UDQUOT_BUF ||
825                type == XFS_BLF_PDQUOT_BUF ||
826                type == XFS_BLF_GDQUOT_BUF);
827         ASSERT(atomic_read(&bip->bli_refcount) > 0);
828
829         bip->bli_format.blf_flags |= type;
830 }