Linux-libre 5.4.48-gnu
[librecmc/linux-libre.git] / drivers / usb / phy / phy-generic.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * NOP USB transceiver for all USB transceiver which are either built-in
4  * into USB IP or which are mostly autonomous.
5  *
6  * Copyright (C) 2009 Texas Instruments Inc
7  * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
8  *
9  * Current status:
10  *      This provides a "nop" transceiver for PHYs which are
11  *      autonomous such as isp1504, isp1707, etc.
12  */
13
14 #include <linux/module.h>
15 #include <linux/platform_device.h>
16 #include <linux/dma-mapping.h>
17 #include <linux/usb/gadget.h>
18 #include <linux/usb/otg.h>
19 #include <linux/usb/usb_phy_generic.h>
20 #include <linux/slab.h>
21 #include <linux/clk.h>
22 #include <linux/regulator/consumer.h>
23 #include <linux/of.h>
24 #include <linux/of_gpio.h>
25 #include <linux/gpio.h>
26 #include <linux/delay.h>
27
28 #include "phy-generic.h"
29
30 #define VBUS_IRQ_FLAGS \
31         (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \
32                 IRQF_ONESHOT)
33
34 struct platform_device *usb_phy_generic_register(void)
35 {
36         return platform_device_register_simple("usb_phy_generic",
37                         PLATFORM_DEVID_AUTO, NULL, 0);
38 }
39 EXPORT_SYMBOL_GPL(usb_phy_generic_register);
40
41 void usb_phy_generic_unregister(struct platform_device *pdev)
42 {
43         platform_device_unregister(pdev);
44 }
45 EXPORT_SYMBOL_GPL(usb_phy_generic_unregister);
46
47 static int nop_set_suspend(struct usb_phy *x, int suspend)
48 {
49         struct usb_phy_generic *nop = dev_get_drvdata(x->dev);
50
51         if (!IS_ERR(nop->clk)) {
52                 if (suspend)
53                         clk_disable_unprepare(nop->clk);
54                 else
55                         clk_prepare_enable(nop->clk);
56         }
57
58         return 0;
59 }
60
61 static void nop_reset(struct usb_phy_generic *nop)
62 {
63         if (!nop->gpiod_reset)
64                 return;
65
66         gpiod_set_value_cansleep(nop->gpiod_reset, 1);
67         usleep_range(10000, 20000);
68         gpiod_set_value_cansleep(nop->gpiod_reset, 0);
69 }
70
71 /* interface to regulator framework */
72 static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA)
73 {
74         struct regulator *vbus_draw = nop->vbus_draw;
75         int enabled;
76         int ret;
77
78         if (!vbus_draw)
79                 return;
80
81         enabled = nop->vbus_draw_enabled;
82         if (mA) {
83                 regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
84                 if (!enabled) {
85                         ret = regulator_enable(vbus_draw);
86                         if (ret < 0)
87                                 return;
88                         nop->vbus_draw_enabled = 1;
89                 }
90         } else {
91                 if (enabled) {
92                         ret = regulator_disable(vbus_draw);
93                         if (ret < 0)
94                                 return;
95                         nop->vbus_draw_enabled = 0;
96                 }
97         }
98         nop->mA = mA;
99 }
100
101
102 static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
103 {
104         struct usb_phy_generic *nop = data;
105         struct usb_otg *otg = nop->phy.otg;
106         int vbus, status;
107
108         vbus = gpiod_get_value(nop->gpiod_vbus);
109         if ((vbus ^ nop->vbus) == 0)
110                 return IRQ_HANDLED;
111         nop->vbus = vbus;
112
113         if (vbus) {
114                 status = USB_EVENT_VBUS;
115                 otg->state = OTG_STATE_B_PERIPHERAL;
116                 nop->phy.last_event = status;
117
118                 /* drawing a "unit load" is *always* OK, except for OTG */
119                 nop_set_vbus_draw(nop, 100);
120
121                 atomic_notifier_call_chain(&nop->phy.notifier, status,
122                                            otg->gadget);
123         } else {
124                 nop_set_vbus_draw(nop, 0);
125
126                 status = USB_EVENT_NONE;
127                 otg->state = OTG_STATE_B_IDLE;
128                 nop->phy.last_event = status;
129
130                 atomic_notifier_call_chain(&nop->phy.notifier, status,
131                                            otg->gadget);
132         }
133         return IRQ_HANDLED;
134 }
135
136 int usb_gen_phy_init(struct usb_phy *phy)
137 {
138         struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
139         int ret;
140
141         if (!IS_ERR(nop->vcc)) {
142                 if (regulator_enable(nop->vcc))
143                         dev_err(phy->dev, "Failed to enable power\n");
144         }
145
146         if (!IS_ERR(nop->clk)) {
147                 ret = clk_prepare_enable(nop->clk);
148                 if (ret)
149                         return ret;
150         }
151
152         nop_reset(nop);
153
154         return 0;
155 }
156 EXPORT_SYMBOL_GPL(usb_gen_phy_init);
157
158 void usb_gen_phy_shutdown(struct usb_phy *phy)
159 {
160         struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
161
162         gpiod_set_value_cansleep(nop->gpiod_reset, 1);
163
164         if (!IS_ERR(nop->clk))
165                 clk_disable_unprepare(nop->clk);
166
167         if (!IS_ERR(nop->vcc)) {
168                 if (regulator_disable(nop->vcc))
169                         dev_err(phy->dev, "Failed to disable power\n");
170         }
171 }
172 EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown);
173
174 static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
175 {
176         if (!otg)
177                 return -ENODEV;
178
179         if (!gadget) {
180                 otg->gadget = NULL;
181                 return -ENODEV;
182         }
183
184         otg->gadget = gadget;
185         if (otg->state == OTG_STATE_B_PERIPHERAL)
186                 atomic_notifier_call_chain(&otg->usb_phy->notifier,
187                                            USB_EVENT_VBUS, otg->gadget);
188         else
189                 otg->state = OTG_STATE_B_IDLE;
190         return 0;
191 }
192
193 static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
194 {
195         if (!otg)
196                 return -ENODEV;
197
198         if (!host) {
199                 otg->host = NULL;
200                 return -ENODEV;
201         }
202
203         otg->host = host;
204         return 0;
205 }
206
207 int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
208                 struct usb_phy_generic_platform_data *pdata)
209 {
210         enum usb_phy_type type = USB_PHY_TYPE_USB2;
211         int err = 0;
212
213         u32 clk_rate = 0;
214         bool needs_vcc = false, needs_clk = false;
215
216         if (dev->of_node) {
217                 struct device_node *node = dev->of_node;
218
219                 if (of_property_read_u32(node, "clock-frequency", &clk_rate))
220                         clk_rate = 0;
221
222                 needs_vcc = of_property_read_bool(node, "vcc-supply");
223                 needs_clk = of_property_read_bool(node, "clocks");
224                 nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
225                                                            GPIOD_ASIS);
226                 err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
227                 if (!err) {
228                         nop->gpiod_vbus = devm_gpiod_get_optional(dev,
229                                                          "vbus-detect",
230                                                          GPIOD_ASIS);
231                         err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
232                 }
233         } else if (pdata) {
234                 type = pdata->type;
235                 clk_rate = pdata->clk_rate;
236                 needs_vcc = pdata->needs_vcc;
237                 if (gpio_is_valid(pdata->gpio_reset)) {
238                         err = devm_gpio_request_one(dev, pdata->gpio_reset,
239                                                     GPIOF_ACTIVE_LOW,
240                                                     dev_name(dev));
241                         if (!err)
242                                 nop->gpiod_reset =
243                                         gpio_to_desc(pdata->gpio_reset);
244                 }
245                 nop->gpiod_vbus = pdata->gpiod_vbus;
246         }
247
248         if (err == -EPROBE_DEFER)
249                 return -EPROBE_DEFER;
250         if (err) {
251                 dev_err(dev, "Error requesting RESET or VBUS GPIO\n");
252                 return err;
253         }
254         if (nop->gpiod_reset)
255                 gpiod_direction_output(nop->gpiod_reset, 1);
256
257         nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
258                         GFP_KERNEL);
259         if (!nop->phy.otg)
260                 return -ENOMEM;
261
262         nop->clk = devm_clk_get(dev, "main_clk");
263         if (IS_ERR(nop->clk)) {
264                 dev_dbg(dev, "Can't get phy clock: %ld\n",
265                                         PTR_ERR(nop->clk));
266                 if (needs_clk)
267                         return PTR_ERR(nop->clk);
268         }
269
270         if (!IS_ERR(nop->clk) && clk_rate) {
271                 err = clk_set_rate(nop->clk, clk_rate);
272                 if (err) {
273                         dev_err(dev, "Error setting clock rate\n");
274                         return err;
275                 }
276         }
277
278         nop->vcc = devm_regulator_get(dev, "vcc");
279         if (IS_ERR(nop->vcc)) {
280                 dev_dbg(dev, "Error getting vcc regulator: %ld\n",
281                                         PTR_ERR(nop->vcc));
282                 if (needs_vcc)
283                         return -EPROBE_DEFER;
284         }
285
286         nop->dev                = dev;
287         nop->phy.dev            = nop->dev;
288         nop->phy.label          = "nop-xceiv";
289         nop->phy.set_suspend    = nop_set_suspend;
290         nop->phy.type           = type;
291
292         nop->phy.otg->state             = OTG_STATE_UNDEFINED;
293         nop->phy.otg->usb_phy           = &nop->phy;
294         nop->phy.otg->set_host          = nop_set_host;
295         nop->phy.otg->set_peripheral    = nop_set_peripheral;
296
297         return 0;
298 }
299 EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
300
301 static int usb_phy_generic_probe(struct platform_device *pdev)
302 {
303         struct device *dev = &pdev->dev;
304         struct usb_phy_generic  *nop;
305         int err;
306
307         nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
308         if (!nop)
309                 return -ENOMEM;
310
311         err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
312         if (err)
313                 return err;
314         if (nop->gpiod_vbus) {
315                 err = devm_request_threaded_irq(&pdev->dev,
316                                                 gpiod_to_irq(nop->gpiod_vbus),
317                                                 NULL, nop_gpio_vbus_thread,
318                                                 VBUS_IRQ_FLAGS, "vbus_detect",
319                                                 nop);
320                 if (err) {
321                         dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
322                                 gpiod_to_irq(nop->gpiod_vbus), err);
323                         return err;
324                 }
325                 nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ?
326                         OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE;
327         }
328
329         nop->phy.init           = usb_gen_phy_init;
330         nop->phy.shutdown       = usb_gen_phy_shutdown;
331
332         err = usb_add_phy_dev(&nop->phy);
333         if (err) {
334                 dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
335                         err);
336                 return err;
337         }
338
339         platform_set_drvdata(pdev, nop);
340
341         return 0;
342 }
343
344 static int usb_phy_generic_remove(struct platform_device *pdev)
345 {
346         struct usb_phy_generic *nop = platform_get_drvdata(pdev);
347
348         usb_remove_phy(&nop->phy);
349
350         return 0;
351 }
352
353 static const struct of_device_id nop_xceiv_dt_ids[] = {
354         { .compatible = "usb-nop-xceiv" },
355         { }
356 };
357
358 MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
359
360 static struct platform_driver usb_phy_generic_driver = {
361         .probe          = usb_phy_generic_probe,
362         .remove         = usb_phy_generic_remove,
363         .driver         = {
364                 .name   = "usb_phy_generic",
365                 .of_match_table = nop_xceiv_dt_ids,
366         },
367 };
368
369 static int __init usb_phy_generic_init(void)
370 {
371         return platform_driver_register(&usb_phy_generic_driver);
372 }
373 subsys_initcall(usb_phy_generic_init);
374
375 static void __exit usb_phy_generic_exit(void)
376 {
377         platform_driver_unregister(&usb_phy_generic_driver);
378 }
379 module_exit(usb_phy_generic_exit);
380
381 MODULE_ALIAS("platform:usb_phy_generic");
382 MODULE_AUTHOR("Texas Instruments Inc");
383 MODULE_DESCRIPTION("NOP USB Transceiver driver");
384 MODULE_LICENSE("GPL");