drivers/usb/misc/ehset.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
   4  */
   5
   6 #include <linux/kernel.h>
   7 #include <linux/errno.h>
   8 #include <linux/module.h>
   9 #include <linux/slab.h>
  10 #include <linux/usb.h>
  11 #include <linux/usb/ch11.h>
  12
  13 #define TEST_SE0_NAK_PID                        0x0101
  14 #define TEST_J_PID                              0x0102
  15 #define TEST_K_PID                              0x0103
  16 #define TEST_PACKET_PID                         0x0104
  17 #define TEST_HS_HOST_PORT_SUSPEND_RESUME        0x0106
  18 #define TEST_SINGLE_STEP_GET_DEV_DESC           0x0107
  19 #define TEST_SINGLE_STEP_SET_FEATURE            0x0108
  20
  21 static int ehset_probe(struct usb_interface *intf,
  22                        const struct usb_device_id *id)
  23 {
  24         int ret = -EINVAL;
  25         struct usb_device *dev = interface_to_usbdev(intf);
  26         struct usb_device *hub_udev = dev->parent;
  27         struct usb_device_descriptor *buf;
  28         u8 portnum = dev->portnum;
  29         u16 test_pid = le16_to_cpu(dev->descriptor.idProduct);
  30
  31         switch (test_pid) {
  32         case TEST_SE0_NAK_PID:
  33                 ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
  34                                         USB_REQ_SET_FEATURE, USB_RT_PORT,
  35                                         USB_PORT_FEAT_TEST,
  36                                         (TEST_SE0_NAK << 8) | portnum,
  37                                         NULL, 0, 1000);
  38                 break;
  39         case TEST_J_PID:
  40                 ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
  41                                         USB_REQ_SET_FEATURE, USB_RT_PORT,
  42                                         USB_PORT_FEAT_TEST,
  43                                         (TEST_J << 8) | portnum,
  44                                         NULL, 0, 1000);
  45                 break;
  46         case TEST_K_PID:
  47                 ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
  48                                         USB_REQ_SET_FEATURE, USB_RT_PORT,
  49                                         USB_PORT_FEAT_TEST,
  50                                         (TEST_K << 8) | portnum,
  51                                         NULL, 0, 1000);
  52                 break;
  53         case TEST_PACKET_PID:
  54                 ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
  55                                         USB_REQ_SET_FEATURE, USB_RT_PORT,
  56                                         USB_PORT_FEAT_TEST,
  57                                         (TEST_PACKET << 8) | portnum,
  58                                         NULL, 0, 1000);
  59                 break;
  60         case TEST_HS_HOST_PORT_SUSPEND_RESUME:
  61                 /* Test: wait for 15secs -> suspend -> 15secs delay -> resume */
  62                 msleep(15 * 1000);
  63                 ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
  64                                         USB_REQ_SET_FEATURE, USB_RT_PORT,
  65                                         USB_PORT_FEAT_SUSPEND, portnum,
  66                                         NULL, 0, 1000);
  67                 if (ret < 0)
  68                         break;
  69
  70                 msleep(15 * 1000);
  71                 ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
  72                                         USB_REQ_CLEAR_FEATURE, USB_RT_PORT,
  73                                         USB_PORT_FEAT_SUSPEND, portnum,
  74                                         NULL, 0, 1000);
  75                 break;
  76         case TEST_SINGLE_STEP_GET_DEV_DESC:
  77                 /* Test: wait for 15secs -> GetDescriptor request */
  78                 msleep(15 * 1000);
  79                 buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
  80                 if (!buf)
  81                         return -ENOMEM;
  82
  83                 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
  84                                         USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
  85                                         USB_DT_DEVICE << 8, 0,
  86                                         buf, USB_DT_DEVICE_SIZE,
  87                                         USB_CTRL_GET_TIMEOUT);
  88                 kfree(buf);
  89                 break;
  90         case TEST_SINGLE_STEP_SET_FEATURE:
  91                 /*
  92                  * GetDescriptor SETUP request -> 15secs delay -> IN & STATUS
  93                  *
  94                  * Note, this test is only supported on root hubs since the
  95                  * SetPortFeature handling can only be done inside the HCD's
  96                  * hub_control callback function.
  97                  */
  98                 if (hub_udev != dev->bus->root_hub) {
  99                         dev_err(&intf->dev, "SINGLE_STEP_SET_FEATURE test only supported on root hub\n");
 100                         break;
 101                 }
 102
 103                 ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
 104                                         USB_REQ_SET_FEATURE, USB_RT_PORT,
 105                                         USB_PORT_FEAT_TEST,
 106                                         (6 << 8) | portnum,
 107                                         NULL, 0, 60 * 1000);
 108
 109                 break;
 110         default:
 111                 dev_err(&intf->dev, "%s: unsupported PID: 0x%x\n",
 112                         __func__, test_pid);
 113         }
 114
 115         return (ret < 0) ? ret : 0;
 116 }
 117
 118 static void ehset_disconnect(struct usb_interface *intf)
 119 {
 120 }
 121
 122 static const struct usb_device_id ehset_id_table[] = {
 123         { USB_DEVICE(0x1a0a, TEST_SE0_NAK_PID) },
 124         { USB_DEVICE(0x1a0a, TEST_J_PID) },
 125         { USB_DEVICE(0x1a0a, TEST_K_PID) },
 126         { USB_DEVICE(0x1a0a, TEST_PACKET_PID) },
 127         { USB_DEVICE(0x1a0a, TEST_HS_HOST_PORT_SUSPEND_RESUME) },
 128         { USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_GET_DEV_DESC) },
 129         { USB_DEVICE(0x1a0a, TEST_SINGLE_STEP_SET_FEATURE) },
 130         { }                     /* Terminating entry */
 131 };
 132 MODULE_DEVICE_TABLE(usb, ehset_id_table);
 133
 134 static struct usb_driver ehset_driver = {
 135         .name =         "usb_ehset_test",
 136         .probe =        ehset_probe,
 137         .disconnect =   ehset_disconnect,
 138         .id_table =     ehset_id_table,
 139 };
 140
 141 module_usb_driver(ehset_driver);
 142
 143 MODULE_DESCRIPTION("USB Driver for EHSET Test Fixture");
 144 MODULE_LICENSE("GPL v2");