drivers/usb/dwc3/ep0.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
   4  *
   5  * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
   6  *
   7  * Authors: Felipe Balbi <balbi@ti.com>,
   8  *          Sebastian Andrzej Siewior <bigeasy@linutronix.de>
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/slab.h>
  13 #include <linux/spinlock.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/pm_runtime.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/io.h>
  18 #include <linux/list.h>
  19 #include <linux/dma-mapping.h>
  20
  21 #include <linux/usb/ch9.h>
  22 #include <linux/usb/gadget.h>
  23 #include <linux/usb/composite.h>
  24
  25 #include "core.h"
  26 #include "debug.h"
  27 #include "gadget.h"
  28 #include "io.h"
  29
  30 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
  31 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
  32                 struct dwc3_ep *dep, struct dwc3_request *req);
  33
  34 static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep,
  35                 dma_addr_t buf_dma, u32 len, u32 type, bool chain)
  36 {
  37         struct dwc3_trb                 *trb;
  38         struct dwc3                     *dwc;
  39
  40         dwc = dep->dwc;
  41         trb = &dwc->ep0_trb[dep->trb_enqueue];
  42
  43         if (chain)
  44                 dep->trb_enqueue++;
  45
  46         trb->bpl = lower_32_bits(buf_dma);
  47         trb->bph = upper_32_bits(buf_dma);
  48         trb->size = len;
  49         trb->ctrl = type;
  50
  51         trb->ctrl |= (DWC3_TRB_CTRL_HWO
  52                         | DWC3_TRB_CTRL_ISP_IMI);
  53
  54         if (chain)
  55                 trb->ctrl |= DWC3_TRB_CTRL_CHN;
  56         else
  57                 trb->ctrl |= (DWC3_TRB_CTRL_IOC
  58                                 | DWC3_TRB_CTRL_LST);
  59
  60         trace_dwc3_prepare_trb(dep, trb);
  61 }
  62
  63 static int dwc3_ep0_start_trans(struct dwc3_ep *dep)
  64 {
  65         struct dwc3_gadget_ep_cmd_params params;
  66         struct dwc3                     *dwc;
  67         int                             ret;
  68
  69         if (dep->flags & DWC3_EP_TRANSFER_STARTED)
  70                 return 0;
  71
  72         dwc = dep->dwc;
  73
  74         memset(&params, 0, sizeof(params));
  75         params.param0 = upper_32_bits(dwc->ep0_trb_addr);
  76         params.param1 = lower_32_bits(dwc->ep0_trb_addr);
  77
  78         ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, &params);
  79         if (ret < 0)
  80                 return ret;
  81
  82         dwc->ep0_next_event = DWC3_EP0_COMPLETE;
  83
  84         return 0;
  85 }
  86
  87 static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
  88                 struct dwc3_request *req)
  89 {
  90         struct dwc3             *dwc = dep->dwc;
  91
  92         req->request.actual     = 0;
  93         req->request.status     = -EINPROGRESS;
  94         req->epnum              = dep->number;
  95
  96         list_add_tail(&req->list, &dep->pending_list);
  97
  98         /*
  99          * Gadget driver might not be quick enough to queue a request
 100          * before we get a Transfer Not Ready event on this endpoint.
 101          *
 102          * In that case, we will set DWC3_EP_PENDING_REQUEST. When that
 103          * flag is set, it's telling us that as soon as Gadget queues the
 104          * required request, we should kick the transfer here because the
 105          * IRQ we were waiting for is long gone.
 106          */
 107         if (dep->flags & DWC3_EP_PENDING_REQUEST) {
 108                 unsigned        direction;
 109
 110                 direction = !!(dep->flags & DWC3_EP0_DIR_IN);
 111
 112                 if (dwc->ep0state != EP0_DATA_PHASE) {
 113                         dev_WARN(dwc->dev, "Unexpected pending request\n");
 114                         return 0;
 115                 }
 116
 117                 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
 118
 119                 dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
 120                                 DWC3_EP0_DIR_IN);
 121
 122                 return 0;
 123         }
 124
 125         /*
 126          * In case gadget driver asked us to delay the STATUS phase,
 127          * handle it here.
 128          */
 129         if (dwc->delayed_status) {
 130                 unsigned        direction;
 131
 132                 direction = !dwc->ep0_expect_in;
 133                 dwc->delayed_status = false;
 134                 usb_gadget_set_state(&dwc->gadget, USB_STATE_CONFIGURED);
 135
 136                 if (dwc->ep0state == EP0_STATUS_PHASE)
 137                         __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
 138
 139                 return 0;
 140         }
 141
 142         /*
 143          * Unfortunately we have uncovered a limitation wrt the Data Phase.
 144          *
 145          * Section 9.4 says we can wait for the XferNotReady(DATA) event to
 146          * come before issueing Start Transfer command, but if we do, we will
 147          * miss situations where the host starts another SETUP phase instead of
 148          * the DATA phase.  Such cases happen at least on TD.7.6 of the Link
 149          * Layer Compliance Suite.
 150          *
 151          * The problem surfaces due to the fact that in case of back-to-back
 152          * SETUP packets there will be no XferNotReady(DATA) generated and we
 153          * will be stuck waiting for XferNotReady(DATA) forever.
 154          *
 155          * By looking at tables 9-13 and 9-14 of the Databook, we can see that
 156          * it tells us to start Data Phase right away. It also mentions that if
 157          * we receive a SETUP phase instead of the DATA phase, core will issue
 158          * XferComplete for the DATA phase, before actually initiating it in
 159          * the wire, with the TRB's status set to "SETUP_PENDING". Such status
 160          * can only be used to print some debugging logs, as the core expects
 161          * us to go through to the STATUS phase and start a CONTROL_STATUS TRB,
 162          * just so it completes right away, without transferring anything and,
 163          * only then, we can go back to the SETUP phase.
 164          *
 165          * Because of this scenario, SNPS decided to change the programming
 166          * model of control transfers and support on-demand transfers only for
 167          * the STATUS phase. To fix the issue we have now, we will always wait
 168          * for gadget driver to queue the DATA phase's struct usb_request, then
 169          * start it right away.
 170          *
 171          * If we're actually in a 2-stage transfer, we will wait for
 172          * XferNotReady(STATUS).
 173          */
 174         if (dwc->three_stage_setup) {
 175                 unsigned        direction;
 176
 177                 direction = dwc->ep0_expect_in;
 178                 dwc->ep0state = EP0_DATA_PHASE;
 179
 180                 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
 181
 182                 dep->flags &= ~DWC3_EP0_DIR_IN;
 183         }
 184
 185         return 0;
 186 }
 187
 188 int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 189                 gfp_t gfp_flags)
 190 {
 191         struct dwc3_request             *req = to_dwc3_request(request);
 192         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
 193         struct dwc3                     *dwc = dep->dwc;
 194
 195         unsigned long                   flags;
 196
 197         int                             ret;
 198
 199         spin_lock_irqsave(&dwc->lock, flags);
 200         if (!dep->endpoint.desc) {
 201                 dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
 202                                 dep->name);
 203                 ret = -ESHUTDOWN;
 204                 goto out;
 205         }
 206
 207         /* we share one TRB for ep0/1 */
 208         if (!list_empty(&dep->pending_list)) {
 209                 ret = -EBUSY;
 210                 goto out;
 211         }
 212
 213         ret = __dwc3_gadget_ep0_queue(dep, req);
 214
 215 out:
 216         spin_unlock_irqrestore(&dwc->lock, flags);
 217
 218         return ret;
 219 }
 220
 221 static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
 222 {
 223         struct dwc3_ep          *dep;
 224
 225         /* reinitialize physical ep1 */
 226         dep = dwc->eps[1];
 227         dep->flags = DWC3_EP_ENABLED;
 228
 229         /* stall is always issued on EP0 */
 230         dep = dwc->eps[0];
 231         __dwc3_gadget_ep_set_halt(dep, 1, false);
 232         dep->flags = DWC3_EP_ENABLED;
 233         dwc->delayed_status = false;
 234
 235         if (!list_empty(&dep->pending_list)) {
 236                 struct dwc3_request     *req;
 237
 238                 req = next_request(&dep->pending_list);
 239                 dwc3_gadget_giveback(dep, req, -ECONNRESET);
 240         }
 241
 242         dwc->ep0state = EP0_SETUP_PHASE;
 243         dwc3_ep0_out_start(dwc);
 244 }
 245
 246 int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
 247 {
 248         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
 249         struct dwc3                     *dwc = dep->dwc;
 250
 251         dwc3_ep0_stall_and_restart(dwc);
 252
 253         return 0;
 254 }
 255
 256 int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
 257 {
 258         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
 259         struct dwc3                     *dwc = dep->dwc;
 260         unsigned long                   flags;
 261         int                             ret;
 262
 263         spin_lock_irqsave(&dwc->lock, flags);
 264         ret = __dwc3_gadget_ep0_set_halt(ep, value);
 265         spin_unlock_irqrestore(&dwc->lock, flags);
 266
 267         return ret;
 268 }
 269
 270 void dwc3_ep0_out_start(struct dwc3 *dwc)
 271 {
 272         struct dwc3_ep                  *dep;
 273         int                             ret;
 274
 275         complete(&dwc->ep0_in_setup);
 276
 277         dep = dwc->eps[0];
 278         dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 8,
 279                         DWC3_TRBCTL_CONTROL_SETUP, false);
 280         ret = dwc3_ep0_start_trans(dep);
 281         WARN_ON(ret < 0);
 282 }
 283
 284 static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
 285 {
 286         struct dwc3_ep          *dep;
 287         u32                     windex = le16_to_cpu(wIndex_le);
 288         u32                     epnum;
 289
 290         epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
 291         if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
 292                 epnum |= 1;
 293
 294         dep = dwc->eps[epnum];
 295         if (dep->flags & DWC3_EP_ENABLED)
 296                 return dep;
 297
 298         return NULL;
 299 }
 300
 301 static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req)
 302 {
 303 }
 304 /*
 305  * ch 9.4.5
 306  */
 307 static int dwc3_ep0_handle_status(struct dwc3 *dwc,
 308                 struct usb_ctrlrequest *ctrl)
 309 {
 310         struct dwc3_ep          *dep;
 311         u32                     recip;
 312         u32                     value;
 313         u32                     reg;
 314         u16                     usb_status = 0;
 315         __le16                  *response_pkt;
 316
 317         /* We don't support PTM_STATUS */
 318         value = le16_to_cpu(ctrl->wValue);
 319         if (value != 0)
 320                 return -EINVAL;
 321
 322         recip = ctrl->bRequestType & USB_RECIP_MASK;
 323         switch (recip) {
 324         case USB_RECIP_DEVICE:
 325                 /*
 326                  * LTM will be set once we know how to set this in HW.
 327                  */
 328                 usb_status |= dwc->gadget.is_selfpowered;
 329
 330                 if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
 331                     (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
 332                         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 333                         if (reg & DWC3_DCTL_INITU1ENA)
 334                                 usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
 335                         if (reg & DWC3_DCTL_INITU2ENA)
 336                                 usb_status |= 1 << USB_DEV_STAT_U2_ENABLED;
 337                 }
 338
 339                 break;
 340
 341         case USB_RECIP_INTERFACE:
 342                 /*
 343                  * Function Remote Wake Capable D0
 344                  * Function Remote Wakeup       D1
 345                  */
 346                 break;
 347
 348         case USB_RECIP_ENDPOINT:
 349                 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
 350                 if (!dep)
 351                         return -EINVAL;
 352
 353                 if (dep->flags & DWC3_EP_STALL)
 354                         usb_status = 1 << USB_ENDPOINT_HALT;
 355                 break;
 356         default:
 357                 return -EINVAL;
 358         }
 359
 360         response_pkt = (__le16 *) dwc->setup_buf;
 361         *response_pkt = cpu_to_le16(usb_status);
 362
 363         dep = dwc->eps[0];
 364         dwc->ep0_usb_req.dep = dep;
 365         dwc->ep0_usb_req.request.length = sizeof(*response_pkt);
 366         dwc->ep0_usb_req.request.buf = dwc->setup_buf;
 367         dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl;
 368
 369         return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
 370 }
 371
 372 static int dwc3_ep0_handle_u1(struct dwc3 *dwc, enum usb_device_state state,
 373                 int set)
 374 {
 375         u32 reg;
 376
 377         if (state != USB_STATE_CONFIGURED)
 378                 return -EINVAL;
 379         if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
 380                         (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
 381                 return -EINVAL;
 382         if (set && dwc->dis_u1_entry_quirk)
 383                 return -EINVAL;
 384
 385         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 386         if (set)
 387                 reg |= DWC3_DCTL_INITU1ENA;
 388         else
 389                 reg &= ~DWC3_DCTL_INITU1ENA;
 390         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 391
 392         return 0;
 393 }
 394
 395 static int dwc3_ep0_handle_u2(struct dwc3 *dwc, enum usb_device_state state,
 396                 int set)
 397 {
 398         u32 reg;
 399
 400
 401         if (state != USB_STATE_CONFIGURED)
 402                 return -EINVAL;
 403         if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
 404                         (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
 405                 return -EINVAL;
 406         if (set && dwc->dis_u2_entry_quirk)
 407                 return -EINVAL;
 408
 409         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 410         if (set)
 411                 reg |= DWC3_DCTL_INITU2ENA;
 412         else
 413                 reg &= ~DWC3_DCTL_INITU2ENA;
 414         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 415
 416         return 0;
 417 }
 418
 419 static int dwc3_ep0_handle_test(struct dwc3 *dwc, enum usb_device_state state,
 420                 u32 wIndex, int set)
 421 {
 422         if ((wIndex & 0xff) != 0)
 423                 return -EINVAL;
 424         if (!set)
 425                 return -EINVAL;
 426
 427         switch (wIndex >> 8) {
 428         case TEST_J:
 429         case TEST_K:
 430         case TEST_SE0_NAK:
 431         case TEST_PACKET:
 432         case TEST_FORCE_EN:
 433                 dwc->test_mode_nr = wIndex >> 8;
 434                 dwc->test_mode = true;
 435                 break;
 436         default:
 437                 return -EINVAL;
 438         }
 439
 440         return 0;
 441 }
 442
 443 static int dwc3_ep0_handle_device(struct dwc3 *dwc,
 444                 struct usb_ctrlrequest *ctrl, int set)
 445 {
 446         enum usb_device_state   state;
 447         u32                     wValue;
 448         u32                     wIndex;
 449         int                     ret = 0;
 450
 451         wValue = le16_to_cpu(ctrl->wValue);
 452         wIndex = le16_to_cpu(ctrl->wIndex);
 453         state = dwc->gadget.state;
 454
 455         switch (wValue) {
 456         case USB_DEVICE_REMOTE_WAKEUP:
 457                 break;
 458         /*
 459          * 9.4.1 says only only for SS, in AddressState only for
 460          * default control pipe
 461          */
 462         case USB_DEVICE_U1_ENABLE:
 463                 ret = dwc3_ep0_handle_u1(dwc, state, set);
 464                 break;
 465         case USB_DEVICE_U2_ENABLE:
 466                 ret = dwc3_ep0_handle_u2(dwc, state, set);
 467                 break;
 468         case USB_DEVICE_LTM_ENABLE:
 469                 ret = -EINVAL;
 470                 break;
 471         case USB_DEVICE_TEST_MODE:
 472                 ret = dwc3_ep0_handle_test(dwc, state, wIndex, set);
 473                 break;
 474         default:
 475                 ret = -EINVAL;
 476         }
 477
 478         return ret;
 479 }
 480
 481 static int dwc3_ep0_handle_intf(struct dwc3 *dwc,
 482                 struct usb_ctrlrequest *ctrl, int set)
 483 {
 484         u32                     wValue;
 485         int                     ret = 0;
 486
 487         wValue = le16_to_cpu(ctrl->wValue);
 488
 489         switch (wValue) {
 490         case USB_INTRF_FUNC_SUSPEND:
 491                 /*
 492                  * REVISIT: Ideally we would enable some low power mode here,
 493                  * however it's unclear what we should be doing here.
 494                  *
 495                  * For now, we're not doing anything, just making sure we return
 496                  * 0 so USB Command Verifier tests pass without any errors.
 497                  */
 498                 break;
 499         default:
 500                 ret = -EINVAL;
 501         }
 502
 503         return ret;
 504 }
 505
 506 static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc,
 507                 struct usb_ctrlrequest *ctrl, int set)
 508 {
 509         struct dwc3_ep          *dep;
 510         u32                     wValue;
 511         int                     ret;
 512
 513         wValue = le16_to_cpu(ctrl->wValue);
 514
 515         switch (wValue) {
 516         case USB_ENDPOINT_HALT:
 517                 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
 518                 if (!dep)
 519                         return -EINVAL;
 520
 521                 if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
 522                         break;
 523
 524                 ret = __dwc3_gadget_ep_set_halt(dep, set, true);
 525                 if (ret)
 526                         return -EINVAL;
 527                 break;
 528         default:
 529                 return -EINVAL;
 530         }
 531
 532         return 0;
 533 }
 534
 535 static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 536                 struct usb_ctrlrequest *ctrl, int set)
 537 {
 538         u32                     recip;
 539         int                     ret;
 540
 541         recip = ctrl->bRequestType & USB_RECIP_MASK;
 542
 543         switch (recip) {
 544         case USB_RECIP_DEVICE:
 545                 ret = dwc3_ep0_handle_device(dwc, ctrl, set);
 546                 break;
 547         case USB_RECIP_INTERFACE:
 548                 ret = dwc3_ep0_handle_intf(dwc, ctrl, set);
 549                 break;
 550         case USB_RECIP_ENDPOINT:
 551                 ret = dwc3_ep0_handle_endpoint(dwc, ctrl, set);
 552                 break;
 553         default:
 554                 ret = -EINVAL;
 555         }
 556
 557         return ret;
 558 }
 559
 560 static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 561 {
 562         enum usb_device_state state = dwc->gadget.state;
 563         u32 addr;
 564         u32 reg;
 565
 566         addr = le16_to_cpu(ctrl->wValue);
 567         if (addr > 127) {
 568                 dev_err(dwc->dev, "invalid device address %d\n", addr);
 569                 return -EINVAL;
 570         }
 571
 572         if (state == USB_STATE_CONFIGURED) {
 573                 dev_err(dwc->dev, "can't SetAddress() from Configured State\n");
 574                 return -EINVAL;
 575         }
 576
 577         reg = dwc3_readl(dwc->regs, DWC3_DCFG);
 578         reg &= ~(DWC3_DCFG_DEVADDR_MASK);
 579         reg |= DWC3_DCFG_DEVADDR(addr);
 580         dwc3_writel(dwc->regs, DWC3_DCFG, reg);
 581
 582         if (addr)
 583                 usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS);
 584         else
 585                 usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT);
 586
 587         return 0;
 588 }
 589
 590 static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 591 {
 592         int ret;
 593
 594         spin_unlock(&dwc->lock);
 595         ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
 596         spin_lock(&dwc->lock);
 597         return ret;
 598 }
 599
 600 static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 601 {
 602         enum usb_device_state state = dwc->gadget.state;
 603         u32 cfg;
 604         int ret;
 605         u32 reg;
 606
 607         cfg = le16_to_cpu(ctrl->wValue);
 608
 609         switch (state) {
 610         case USB_STATE_DEFAULT:
 611                 return -EINVAL;
 612
 613         case USB_STATE_ADDRESS:
 614                 ret = dwc3_ep0_delegate_req(dwc, ctrl);
 615                 /* if the cfg matches and the cfg is non zero */
 616                 if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
 617
 618                         /*
 619                          * only change state if set_config has already
 620                          * been processed. If gadget driver returns
 621                          * USB_GADGET_DELAYED_STATUS, we will wait
 622                          * to change the state on the next usb_ep_queue()
 623                          */
 624                         if (ret == 0)
 625                                 usb_gadget_set_state(&dwc->gadget,
 626                                                 USB_STATE_CONFIGURED);
 627
 628                         /*
 629                          * Enable transition to U1/U2 state when
 630                          * nothing is pending from application.
 631                          */
 632                         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 633                         if (!dwc->dis_u1_entry_quirk)
 634                                 reg |= DWC3_DCTL_ACCEPTU1ENA;
 635                         if (!dwc->dis_u2_entry_quirk)
 636                                 reg |= DWC3_DCTL_ACCEPTU2ENA;
 637                         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 638                 }
 639                 break;
 640
 641         case USB_STATE_CONFIGURED:
 642                 ret = dwc3_ep0_delegate_req(dwc, ctrl);
 643                 if (!cfg && !ret)
 644                         usb_gadget_set_state(&dwc->gadget,
 645                                         USB_STATE_ADDRESS);
 646                 break;
 647         default:
 648                 ret = -EINVAL;
 649         }
 650         return ret;
 651 }
 652
 653 static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
 654 {
 655         struct dwc3_ep  *dep = to_dwc3_ep(ep);
 656         struct dwc3     *dwc = dep->dwc;
 657
 658         u32             param = 0;
 659         u32             reg;
 660
 661         struct timing {
 662                 u8      u1sel;
 663                 u8      u1pel;
 664                 __le16  u2sel;
 665                 __le16  u2pel;
 666         } __packed timing;
 667
 668         int             ret;
 669
 670         memcpy(&timing, req->buf, sizeof(timing));
 671
 672         dwc->u1sel = timing.u1sel;
 673         dwc->u1pel = timing.u1pel;
 674         dwc->u2sel = le16_to_cpu(timing.u2sel);
 675         dwc->u2pel = le16_to_cpu(timing.u2pel);
 676
 677         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 678         if (reg & DWC3_DCTL_INITU2ENA)
 679                 param = dwc->u2pel;
 680         if (reg & DWC3_DCTL_INITU1ENA)
 681                 param = dwc->u1pel;
 682
 683         /*
 684          * According to Synopsys Databook, if parameter is
 685          * greater than 125, a value of zero should be
 686          * programmed in the register.
 687          */
 688         if (param > 125)
 689                 param = 0;
 690
 691         /* now that we have the time, issue DGCMD Set Sel */
 692         ret = dwc3_send_gadget_generic_command(dwc,
 693                         DWC3_DGCMD_SET_PERIODIC_PAR, param);
 694         WARN_ON(ret < 0);
 695 }
 696
 697 static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 698 {
 699         struct dwc3_ep  *dep;
 700         enum usb_device_state state = dwc->gadget.state;
 701         u16             wLength;
 702
 703         if (state == USB_STATE_DEFAULT)
 704                 return -EINVAL;
 705
 706         wLength = le16_to_cpu(ctrl->wLength);
 707
 708         if (wLength != 6) {
 709                 dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n",
 710                                 wLength);
 711                 return -EINVAL;
 712         }
 713
 714         /*
 715          * To handle Set SEL we need to receive 6 bytes from Host. So let's
 716          * queue a usb_request for 6 bytes.
 717          *
 718          * Remember, though, this controller can't handle non-wMaxPacketSize
 719          * aligned transfers on the OUT direction, so we queue a request for
 720          * wMaxPacketSize instead.
 721          */
 722         dep = dwc->eps[0];
 723         dwc->ep0_usb_req.dep = dep;
 724         dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket;
 725         dwc->ep0_usb_req.request.buf = dwc->setup_buf;
 726         dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl;
 727
 728         return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
 729 }
 730
 731 static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 732 {
 733         u16             wLength;
 734         u16             wValue;
 735         u16             wIndex;
 736
 737         wValue = le16_to_cpu(ctrl->wValue);
 738         wLength = le16_to_cpu(ctrl->wLength);
 739         wIndex = le16_to_cpu(ctrl->wIndex);
 740
 741         if (wIndex || wLength)
 742                 return -EINVAL;
 743
 744         dwc->gadget.isoch_delay = wValue;
 745
 746         return 0;
 747 }
 748
 749 static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 750 {
 751         int ret;
 752
 753         switch (ctrl->bRequest) {
 754         case USB_REQ_GET_STATUS:
 755                 ret = dwc3_ep0_handle_status(dwc, ctrl);
 756                 break;
 757         case USB_REQ_CLEAR_FEATURE:
 758                 ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
 759                 break;
 760         case USB_REQ_SET_FEATURE:
 761                 ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
 762                 break;
 763         case USB_REQ_SET_ADDRESS:
 764                 ret = dwc3_ep0_set_address(dwc, ctrl);
 765                 break;
 766         case USB_REQ_SET_CONFIGURATION:
 767                 ret = dwc3_ep0_set_config(dwc, ctrl);
 768                 break;
 769         case USB_REQ_SET_SEL:
 770                 ret = dwc3_ep0_set_sel(dwc, ctrl);
 771                 break;
 772         case USB_REQ_SET_ISOCH_DELAY:
 773                 ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
 774                 break;
 775         default:
 776                 ret = dwc3_ep0_delegate_req(dwc, ctrl);
 777                 break;
 778         }
 779
 780         return ret;
 781 }
 782
 783 static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
 784                 const struct dwc3_event_depevt *event)
 785 {
 786         struct usb_ctrlrequest *ctrl = (void *) dwc->ep0_trb;
 787         int ret = -EINVAL;
 788         u32 len;
 789
 790         if (!dwc->gadget_driver)
 791                 goto out;
 792
 793         trace_dwc3_ctrl_req(ctrl);
 794
 795         len = le16_to_cpu(ctrl->wLength);
 796         if (!len) {
 797                 dwc->three_stage_setup = false;
 798                 dwc->ep0_expect_in = false;
 799                 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
 800         } else {
 801                 dwc->three_stage_setup = true;
 802                 dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
 803                 dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
 804         }
 805
 806         if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
 807                 ret = dwc3_ep0_std_request(dwc, ctrl);
 808         else
 809                 ret = dwc3_ep0_delegate_req(dwc, ctrl);
 810
 811         if (ret == USB_GADGET_DELAYED_STATUS)
 812                 dwc->delayed_status = true;
 813
 814 out:
 815         if (ret < 0)
 816                 dwc3_ep0_stall_and_restart(dwc);
 817 }
 818
 819 static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 820                 const struct dwc3_event_depevt *event)
 821 {
 822         struct dwc3_request     *r;
 823         struct usb_request      *ur;
 824         struct dwc3_trb         *trb;
 825         struct dwc3_ep          *ep0;
 826         u32                     transferred = 0;
 827         u32                     status;
 828         u32                     length;
 829         u8                      epnum;
 830
 831         epnum = event->endpoint_number;
 832         ep0 = dwc->eps[0];
 833
 834         dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
 835         trb = dwc->ep0_trb;
 836         trace_dwc3_complete_trb(ep0, trb);
 837
 838         r = next_request(&ep0->pending_list);
 839         if (!r)
 840                 return;
 841
 842         status = DWC3_TRB_SIZE_TRBSTS(trb->size);
 843         if (status == DWC3_TRBSTS_SETUP_PENDING) {
 844                 dwc->setup_packet_pending = true;
 845                 if (r)
 846                         dwc3_gadget_giveback(ep0, r, -ECONNRESET);
 847
 848                 return;
 849         }
 850
 851         ur = &r->request;
 852
 853         length = trb->size & DWC3_TRB_SIZE_MASK;
 854         transferred = ur->length - length;
 855         ur->actual += transferred;
 856
 857         if ((IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
 858              ur->length && ur->zero) || dwc->ep0_bounced) {
 859                 trb++;
 860                 trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
 861                 trace_dwc3_complete_trb(ep0, trb);
 862
 863                 if (r->direction)
 864                         dwc->eps[1]->trb_enqueue = 0;
 865                 else
 866                         dwc->eps[0]->trb_enqueue = 0;
 867
 868                 dwc->ep0_bounced = false;
 869         }
 870
 871         if ((epnum & 1) && ur->actual < ur->length)
 872                 dwc3_ep0_stall_and_restart(dwc);
 873         else
 874                 dwc3_gadget_giveback(ep0, r, 0);
 875 }
 876
 877 static void dwc3_ep0_complete_status(struct dwc3 *dwc,
 878                 const struct dwc3_event_depevt *event)
 879 {
 880         struct dwc3_request     *r;
 881         struct dwc3_ep          *dep;
 882         struct dwc3_trb         *trb;
 883         u32                     status;
 884
 885         dep = dwc->eps[0];
 886         trb = dwc->ep0_trb;
 887
 888         trace_dwc3_complete_trb(dep, trb);
 889
 890         if (!list_empty(&dep->pending_list)) {
 891                 r = next_request(&dep->pending_list);
 892
 893                 dwc3_gadget_giveback(dep, r, 0);
 894         }
 895
 896         if (dwc->test_mode) {
 897                 int ret;
 898
 899                 ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
 900                 if (ret < 0) {
 901                         dev_err(dwc->dev, "invalid test #%d\n",
 902                                         dwc->test_mode_nr);
 903                         dwc3_ep0_stall_and_restart(dwc);
 904                         return;
 905                 }
 906         }
 907
 908         status = DWC3_TRB_SIZE_TRBSTS(trb->size);
 909         if (status == DWC3_TRBSTS_SETUP_PENDING)
 910                 dwc->setup_packet_pending = true;
 911
 912         dwc->ep0state = EP0_SETUP_PHASE;
 913         dwc3_ep0_out_start(dwc);
 914 }
 915
 916 static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
 917                         const struct dwc3_event_depevt *event)
 918 {
 919         struct dwc3_ep          *dep = dwc->eps[event->endpoint_number];
 920
 921         dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
 922         dep->resource_index = 0;
 923         dwc->setup_packet_pending = false;
 924
 925         switch (dwc->ep0state) {
 926         case EP0_SETUP_PHASE:
 927                 dwc3_ep0_inspect_setup(dwc, event);
 928                 break;
 929
 930         case EP0_DATA_PHASE:
 931                 dwc3_ep0_complete_data(dwc, event);
 932                 break;
 933
 934         case EP0_STATUS_PHASE:
 935                 dwc3_ep0_complete_status(dwc, event);
 936                 break;
 937         default:
 938                 WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
 939         }
 940 }
 941
 942 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 943                 struct dwc3_ep *dep, struct dwc3_request *req)
 944 {
 945         int                     ret;
 946
 947         req->direction = !!dep->number;
 948
 949         if (req->request.length == 0) {
 950                 dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0,
 951                                 DWC3_TRBCTL_CONTROL_DATA, false);
 952                 ret = dwc3_ep0_start_trans(dep);
 953         } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
 954                         && (dep->number == 0)) {
 955                 u32     maxpacket;
 956                 u32     rem;
 957
 958                 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
 959                                 &req->request, dep->number);
 960                 if (ret)
 961                         return;
 962
 963                 maxpacket = dep->endpoint.maxpacket;
 964                 rem = req->request.length % maxpacket;
 965                 dwc->ep0_bounced = true;
 966
 967                 /* prepare normal TRB */
 968                 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
 969                                          req->request.length,
 970                                          DWC3_TRBCTL_CONTROL_DATA,
 971                                          true);
 972
 973                 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
 974
 975                 /* Now prepare one extra TRB to align transfer size */
 976                 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
 977                                          maxpacket - rem,
 978                                          DWC3_TRBCTL_CONTROL_DATA,
 979                                          false);
 980                 ret = dwc3_ep0_start_trans(dep);
 981         } else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) &&
 982                    req->request.length && req->request.zero) {
 983
 984                 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
 985                                 &req->request, dep->number);
 986                 if (ret)
 987                         return;
 988
 989                 /* prepare normal TRB */
 990                 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
 991                                          req->request.length,
 992                                          DWC3_TRBCTL_CONTROL_DATA,
 993                                          true);
 994
 995                 req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
 996
 997                 /* Now prepare one extra TRB to align transfer size */
 998                 dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
 999                                          0, DWC3_TRBCTL_CONTROL_DATA,
1000                                          false);
1001                 ret = dwc3_ep0_start_trans(dep);
1002         } else {
1003                 ret = usb_gadget_map_request_by_dev(dwc->sysdev,
1004                                 &req->request, dep->number);
1005                 if (ret)
1006                         return;
1007
1008                 dwc3_ep0_prepare_one_trb(dep, req->request.dma,
1009                                 req->request.length, DWC3_TRBCTL_CONTROL_DATA,
1010                                 false);
1011
1012                 req->trb = &dwc->ep0_trb[dep->trb_enqueue];
1013
1014                 ret = dwc3_ep0_start_trans(dep);
1015         }
1016
1017         WARN_ON(ret < 0);
1018 }
1019
1020 static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
1021 {
1022         struct dwc3             *dwc = dep->dwc;
1023         u32                     type;
1024
1025         type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
1026                 : DWC3_TRBCTL_CONTROL_STATUS2;
1027
1028         dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, type, false);
1029         return dwc3_ep0_start_trans(dep);
1030 }
1031
1032 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
1033 {
1034         WARN_ON(dwc3_ep0_start_control_status(dep));
1035 }
1036
1037 static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
1038                 const struct dwc3_event_depevt *event)
1039 {
1040         struct dwc3_ep          *dep = dwc->eps[event->endpoint_number];
1041
1042         __dwc3_ep0_do_control_status(dwc, dep);
1043 }
1044
1045 static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
1046 {
1047         struct dwc3_gadget_ep_cmd_params params;
1048         u32                     cmd;
1049         int                     ret;
1050
1051         if (!dep->resource_index)
1052                 return;
1053
1054         cmd = DWC3_DEPCMD_ENDTRANSFER;
1055         cmd |= DWC3_DEPCMD_CMDIOC;
1056         cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
1057         memset(&params, 0, sizeof(params));
1058         ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
1059         WARN_ON_ONCE(ret);
1060         dep->resource_index = 0;
1061 }
1062
1063 static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
1064                 const struct dwc3_event_depevt *event)
1065 {
1066         switch (event->status) {
1067         case DEPEVT_STATUS_CONTROL_DATA:
1068                 /*
1069                  * We already have a DATA transfer in the controller's cache,
1070                  * if we receive a XferNotReady(DATA) we will ignore it, unless
1071                  * it's for the wrong direction.
1072                  *
1073                  * In that case, we must issue END_TRANSFER command to the Data
1074                  * Phase we already have started and issue SetStall on the
1075                  * control endpoint.
1076                  */
1077                 if (dwc->ep0_expect_in != event->endpoint_number) {
1078                         struct dwc3_ep  *dep = dwc->eps[dwc->ep0_expect_in];
1079
1080                         dev_err(dwc->dev, "unexpected direction for Data Phase\n");
1081                         dwc3_ep0_end_control_data(dwc, dep);
1082                         dwc3_ep0_stall_and_restart(dwc);
1083                         return;
1084                 }
1085
1086                 break;
1087
1088         case DEPEVT_STATUS_CONTROL_STATUS:
1089                 if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
1090                         return;
1091
1092                 dwc->ep0state = EP0_STATUS_PHASE;
1093
1094                 if (dwc->delayed_status) {
1095                         struct dwc3_ep *dep = dwc->eps[0];
1096
1097                         WARN_ON_ONCE(event->endpoint_number != 1);
1098                         /*
1099                          * We should handle the delay STATUS phase here if the
1100                          * request for handling delay STATUS has been queued
1101                          * into the list.
1102                          */
1103                         if (!list_empty(&dep->pending_list)) {
1104                                 dwc->delayed_status = false;
1105                                 usb_gadget_set_state(&dwc->gadget,
1106                                                      USB_STATE_CONFIGURED);
1107                                 dwc3_ep0_do_control_status(dwc, event);
1108                         }
1109
1110                         return;
1111                 }
1112
1113                 dwc3_ep0_do_control_status(dwc, event);
1114         }
1115 }
1116
1117 void dwc3_ep0_interrupt(struct dwc3 *dwc,
1118                 const struct dwc3_event_depevt *event)
1119 {
1120         struct dwc3_ep  *dep = dwc->eps[event->endpoint_number];
1121         u8              cmd;
1122
1123         switch (event->endpoint_event) {
1124         case DWC3_DEPEVT_XFERCOMPLETE:
1125                 dwc3_ep0_xfer_complete(dwc, event);
1126                 break;
1127
1128         case DWC3_DEPEVT_XFERNOTREADY:
1129                 dwc3_ep0_xfernotready(dwc, event);
1130                 break;
1131
1132         case DWC3_DEPEVT_XFERINPROGRESS:
1133         case DWC3_DEPEVT_RXTXFIFOEVT:
1134         case DWC3_DEPEVT_STREAMEVT:
1135                 break;
1136         case DWC3_DEPEVT_EPCMDCMPLT:
1137                 cmd = DEPEVT_PARAMETER_CMD(event->parameters);
1138
1139                 if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
1140                         dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
1141                         dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
1142                 }
1143                 break;
1144         }
1145 }