drivers/staging/wlan-ng/prism2fw.c

   1 /* from src/prism2/download/prism2dl.c
   2 *
   3 * utility for downloading prism2 images moved into kernelspace
   4 *
   5 * Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
   6 * --------------------------------------------------------------------
   7 *
   8 * linux-wlan
   9 *
  10 *   The contents of this file are subject to the Mozilla Public
  11 *   License Version 1.1 (the "License"); you may not use this file
  12 *   except in compliance with the License. You may obtain a copy of
  13 *   the License at http://www.mozilla.org/MPL/
  14 *
  15 *   Software distributed under the License is distributed on an "AS
  16 *   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  17 *   implied. See the License for the specific language governing
  18 *   rights and limitations under the License.
  19 *
  20 *   Alternatively, the contents of this file may be used under the
  21 *   terms of the GNU Public License version 2 (the "GPL"), in which
  22 *   case the provisions of the GPL are applicable instead of the
  23 *   above.  If you wish to allow the use of your version of this file
  24 *   only under the terms of the GPL and not to allow others to use
  25 *   your version of this file under the MPL, indicate your decision
  26 *   by deleting the provisions above and replace them with the notice
  27 *   and other provisions required by the GPL.  If you do not delete
  28 *   the provisions above, a recipient may use your version of this
  29 *   file under either the MPL or the GPL.
  30 *
  31 * --------------------------------------------------------------------
  32 *
  33 * Inquiries regarding the linux-wlan Open Source project can be
  34 * made directly to:
  35 *
  36 * AbsoluteValue Systems Inc.
  37 * info@linux-wlan.com
  38 * http://www.linux-wlan.com
  39 *
  40 * --------------------------------------------------------------------
  41 *
  42 * Portions of the development of this software were funded by
  43 * Intersil Corporation as part of PRISM(R) chipset product development.
  44 *
  45 * --------------------------------------------------------------------
  46 */
  47
  48 /*================================================================*/
  49 /* System Includes */
  50 #include <linux/ihex.h>
  51 #include <linux/slab.h>
  52
  53 /*================================================================*/
  54 /* Local Constants */
  55
  56 #define PRISM2_USB_FWFILE       "/*(DEBLOBBED)*/"
  57 /*(DEBLOBBED)*/
  58
  59 #define S3DATA_MAX              5000
  60 #define S3PLUG_MAX              200
  61 #define S3CRC_MAX               200
  62 #define S3INFO_MAX              50
  63
  64 #define S3ADDR_PLUG             (0xff000000UL)
  65 #define S3ADDR_CRC              (0xff100000UL)
  66 #define S3ADDR_INFO             (0xff200000UL)
  67 #define S3ADDR_START            (0xff400000UL)
  68
  69 #define CHUNKS_MAX              100
  70
  71 #define WRITESIZE_MAX           4096
  72
  73 /*================================================================*/
  74 /* Local Types */
  75
  76 struct s3datarec {
  77         u32 len;
  78         u32 addr;
  79         u8 checksum;
  80         u8 *data;
  81 };
  82
  83 struct s3plugrec {
  84         u32 itemcode;
  85         u32 addr;
  86         u32 len;
  87 };
  88
  89 struct s3crcrec {
  90         u32 addr;
  91         u32 len;
  92         unsigned int dowrite;
  93 };
  94
  95 struct s3inforec {
  96         u16 len;
  97         u16 type;
  98         union {
  99                 hfa384x_compident_t version;
 100                 hfa384x_caplevel_t compat;
 101                 u16 buildseq;
 102                 hfa384x_compident_t platform;
 103         } info;
 104 };
 105
 106 struct pda {
 107         u8 buf[HFA384x_PDA_LEN_MAX];
 108         hfa384x_pdrec_t *rec[HFA384x_PDA_RECS_MAX];
 109         unsigned int nrec;
 110 };
 111
 112 struct imgchunk {
 113         u32 addr;       /* start address */
 114         u32 len;        /* in bytes */
 115         u16 crc;        /* CRC value (if it falls at a chunk boundary) */
 116         u8 *data;
 117 };
 118
 119 /*================================================================*/
 120 /* Local Static Definitions */
 121
 122 /*----------------------------------------------------------------*/
 123 /* s-record image processing */
 124
 125 /* Data records */
 126 unsigned int ns3data;
 127 struct s3datarec s3data[S3DATA_MAX];
 128
 129 /* Plug records */
 130 unsigned int ns3plug;
 131 struct s3plugrec s3plug[S3PLUG_MAX];
 132
 133 /* CRC records */
 134 unsigned int ns3crc;
 135 struct s3crcrec s3crc[S3CRC_MAX];
 136
 137 /* Info records */
 138 unsigned int ns3info;
 139 struct s3inforec s3info[S3INFO_MAX];
 140
 141 /* S7 record (there _better_ be only one) */
 142 u32 startaddr;
 143
 144 /* Load image chunks */
 145 unsigned int nfchunks;
 146 struct imgchunk fchunk[CHUNKS_MAX];
 147
 148 /* Note that for the following pdrec_t arrays, the len and code */
 149 /*   fields are stored in HOST byte order. The mkpdrlist() function */
 150 /*   does the conversion.  */
 151 /*----------------------------------------------------------------*/
 152 /* PDA, built from [card|newfile]+[addfile1+addfile2...] */
 153
 154 struct pda pda;
 155 hfa384x_compident_t nicid;
 156 hfa384x_caplevel_t rfid;
 157 hfa384x_caplevel_t macid;
 158 hfa384x_caplevel_t priid;
 159
 160 /*================================================================*/
 161 /* Local Function Declarations */
 162
 163 static int prism2_fwapply(const struct ihex_binrec *rfptr,
 164 wlandevice_t *wlandev);
 165
 166 static int read_fwfile(const struct ihex_binrec *rfptr);
 167
 168 static int mkimage(struct imgchunk *clist, unsigned int *ccnt);
 169
 170 static int read_cardpda(struct pda *pda, wlandevice_t *wlandev);
 171
 172 static int mkpdrlist(struct pda *pda);
 173
 174 static int plugimage(struct imgchunk *fchunk, unsigned int nfchunks,
 175               struct s3plugrec *s3plug, unsigned int ns3plug, struct pda *pda);
 176
 177 static int crcimage(struct imgchunk *fchunk, unsigned int nfchunks,
 178              struct s3crcrec *s3crc, unsigned int ns3crc);
 179
 180 static int writeimage(wlandevice_t *wlandev, struct imgchunk *fchunk,
 181                unsigned int nfchunks);
 182 static void free_chunks(struct imgchunk *fchunk, unsigned int *nfchunks);
 183
 184 static void free_srecs(void);
 185
 186 static int validate_identity(void);
 187
 188 /*================================================================*/
 189 /* Function Definitions */
 190
 191 /*----------------------------------------------------------------
 192 * prism2_fwtry
 193 *
 194 * Try and get firmware into memory
 195 *
 196 * Arguments:
 197 *       udev    usb device structure
 198 *       wlandev wlan device structure
 199 *
 200 * Returns:
 201 *       0       - success
 202 *       ~0      - failure
 203 ----------------------------------------------------------------*/
 204 int prism2_fwtry(struct usb_device *udev, wlandevice_t *wlandev)
 205 {
 206         const struct firmware *fw_entry = NULL;
 207
 208         printk(KERN_INFO "prism2_usb: Checking for firmware %s\n",
 209                PRISM2_USB_FWFILE);
 210         if (reject_firmware(&fw_entry,
 211                                   PRISM2_USB_FWFILE, &udev->dev) != 0) {
 212                 printk(KERN_INFO
 213                        "prism2_usb: Firmware not available, but not essential\n");
 214                 printk(KERN_INFO
 215                        "prism2_usb: can continue to use card anyway.\n");
 216                 return 1;
 217         }
 218
 219         printk(KERN_INFO "prism2_usb: %s will be processed, size %zu\n",
 220                PRISM2_USB_FWFILE, fw_entry->size);
 221         prism2_fwapply((const struct ihex_binrec *)fw_entry->data, wlandev);
 222
 223         release_firmware(fw_entry);
 224         return 0;
 225 }
 226
 227 /*----------------------------------------------------------------
 228 * prism2_fwapply
 229 *
 230 * Apply the firmware loaded into memory
 231 *
 232 * Arguments:
 233 *       rfptr   firmware image in kernel memory
 234 *       wlandev device
 235 *
 236 * Returns:
 237 *       0       - success
 238 *       ~0      - failure
 239 ----------------------------------------------------------------*/
 240 int prism2_fwapply(const struct ihex_binrec *rfptr, wlandevice_t *wlandev)
 241 {
 242         signed int result = 0;
 243         struct p80211msg_dot11req_mibget getmsg;
 244         p80211itemd_t *item;
 245         u32 *data;
 246
 247         /* Initialize the data structures */
 248         ns3data = 0;
 249         memset(s3data, 0, sizeof(s3data));
 250         ns3plug = 0;
 251         memset(s3plug, 0, sizeof(s3plug));
 252         ns3crc = 0;
 253         memset(s3crc, 0, sizeof(s3crc));
 254         ns3info = 0;
 255         memset(s3info, 0, sizeof(s3info));
 256         startaddr = 0;
 257
 258         nfchunks = 0;
 259         memset(fchunk, 0, sizeof(fchunk));
 260         memset(&nicid, 0, sizeof(nicid));
 261         memset(&rfid, 0, sizeof(rfid));
 262         memset(&macid, 0, sizeof(macid));
 263         memset(&priid, 0, sizeof(priid));
 264
 265         /* clear the pda and add an initial END record */
 266         memset(&pda, 0, sizeof(pda));
 267         pda.rec[0] = (hfa384x_pdrec_t *) pda.buf;
 268         pda.rec[0]->len = cpu_to_le16(2);       /* len in words */
 269         pda.rec[0]->code = cpu_to_le16(HFA384x_PDR_END_OF_PDA);
 270         pda.nrec = 1;
 271
 272         /*-----------------------------------------------------*/
 273         /* Put card into fwload state */
 274         prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
 275
 276         /* Build the PDA we're going to use. */
 277         if (read_cardpda(&pda, wlandev)) {
 278                 printk(KERN_ERR "load_cardpda failed, exiting.\n");
 279                 return 1;
 280         }
 281
 282         /* read the card's PRI-SUP */
 283         memset(&getmsg, 0, sizeof(getmsg));
 284         getmsg.msgcode = DIDmsg_dot11req_mibget;
 285         getmsg.msglen = sizeof(getmsg);
 286         strcpy(getmsg.devname, wlandev->name);
 287
 288         getmsg.mibattribute.did = DIDmsg_dot11req_mibget_mibattribute;
 289         getmsg.mibattribute.status = P80211ENUM_msgitem_status_data_ok;
 290         getmsg.resultcode.did = DIDmsg_dot11req_mibget_resultcode;
 291         getmsg.resultcode.status = P80211ENUM_msgitem_status_no_value;
 292
 293         item = (p80211itemd_t *) getmsg.mibattribute.data;
 294         item->did = DIDmib_p2_p2NIC_p2PRISupRange;
 295         item->status = P80211ENUM_msgitem_status_no_value;
 296
 297         data = (u32 *) item->data;
 298
 299         /* DIDmsg_dot11req_mibget */
 300         prism2mgmt_mibset_mibget(wlandev, &getmsg);
 301         if (getmsg.resultcode.data != P80211ENUM_resultcode_success)
 302                 printk(KERN_ERR "Couldn't fetch PRI-SUP info\n");
 303
 304         /* Already in host order */
 305         priid.role = *data++;
 306         priid.id = *data++;
 307         priid.variant = *data++;
 308         priid.bottom = *data++;
 309         priid.top = *data++;
 310
 311         /* Read the S3 file */
 312         result = read_fwfile(rfptr);
 313         if (result) {
 314                 printk(KERN_ERR "Failed to read the data exiting.\n");
 315                 return 1;
 316         }
 317
 318         result = validate_identity();
 319
 320         if (result) {
 321                 printk(KERN_ERR "Incompatible firmware image.\n");
 322                 return 1;
 323         }
 324
 325         if (startaddr == 0x00000000) {
 326                 printk(KERN_ERR "Can't RAM download a Flash image!\n");
 327                 return 1;
 328         }
 329
 330         /* Make the image chunks */
 331         result = mkimage(fchunk, &nfchunks);
 332
 333         /* Do any plugging */
 334         result = plugimage(fchunk, nfchunks, s3plug, ns3plug, &pda);
 335         if (result) {
 336                 printk(KERN_ERR "Failed to plug data.\n");
 337                 return 1;
 338         }
 339
 340         /* Insert any CRCs */
 341         if (crcimage(fchunk, nfchunks, s3crc, ns3crc)) {
 342                 printk(KERN_ERR "Failed to insert all CRCs\n");
 343                 return 1;
 344         }
 345
 346         /* Write the image */
 347         result = writeimage(wlandev, fchunk, nfchunks);
 348         if (result) {
 349                 printk(KERN_ERR "Failed to ramwrite image data.\n");
 350                 return 1;
 351         }
 352
 353         /* clear any allocated memory */
 354         free_chunks(fchunk, &nfchunks);
 355         free_srecs();
 356
 357         printk(KERN_INFO "prism2_usb: firmware loading finished.\n");
 358
 359         return result;
 360 }
 361
 362 /*----------------------------------------------------------------
 363 * crcimage
 364 *
 365 * Adds a CRC16 in the two bytes prior to each block identified by
 366 * an S3 CRC record.  Currently, we don't actually do a CRC we just
 367 * insert the value 0xC0DE in hfa384x order.
 368 *
 369 * Arguments:
 370 *       fchunk          Array of image chunks
 371 *       nfchunks        Number of image chunks
 372 *       s3crc           Array of crc records
 373 *       ns3crc          Number of crc records
 374 *
 375 * Returns:
 376 *       0       success
 377 *       ~0      failure
 378 ----------------------------------------------------------------*/
 379 int crcimage(struct imgchunk *fchunk, unsigned int nfchunks,
 380              struct s3crcrec *s3crc, unsigned int ns3crc)
 381 {
 382         int result = 0;
 383         int i;
 384         int c;
 385         u32 crcstart;
 386         u32 crcend;
 387         u32 cstart = 0;
 388         u32 cend;
 389         u8 *dest;
 390         u32 chunkoff;
 391
 392         for (i = 0; i < ns3crc; i++) {
 393                 if (!s3crc[i].dowrite)
 394                         continue;
 395                 crcstart = s3crc[i].addr;
 396                 crcend = s3crc[i].addr + s3crc[i].len;
 397                 /* Find chunk */
 398                 for (c = 0; c < nfchunks; c++) {
 399                         cstart = fchunk[c].addr;
 400                         cend = fchunk[c].addr + fchunk[c].len;
 401                         /* the line below does an address & len match search */
 402                         /* unfortunately, I've found that the len fields of */
 403                         /* some crc records don't match with the length of */
 404                         /* the actual data, so we're not checking right now */
 405                         /* if (crcstart-2 >= cstart && crcend <= cend) break; */
 406
 407                         /* note the -2 below, it's to make sure the chunk has */
 408                         /* space for the CRC value */
 409                         if (crcstart - 2 >= cstart && crcstart < cend)
 410                                 break;
 411                 }
 412                 if (c >= nfchunks) {
 413                         printk(KERN_ERR
 414                                "Failed to find chunk for "
 415                                "crcrec[%d], addr=0x%06x len=%d , "
 416                                "aborting crc.\n",
 417                                i, s3crc[i].addr, s3crc[i].len);
 418                         return 1;
 419                 }
 420
 421                 /* Insert crc */
 422                 pr_debug("Adding crc @ 0x%06x\n", s3crc[i].addr - 2);
 423                 chunkoff = crcstart - cstart - 2;
 424                 dest = fchunk[c].data + chunkoff;
 425                 *dest = 0xde;
 426                 *(dest + 1) = 0xc0;
 427
 428         }
 429         return result;
 430 }
 431
 432 /*----------------------------------------------------------------
 433 * free_chunks
 434 *
 435 * Clears the chunklist data structures in preparation for a new file.
 436 *
 437 * Arguments:
 438 *       none
 439 *
 440 * Returns:
 441 *       nothing
 442 ----------------------------------------------------------------*/
 443 void free_chunks(struct imgchunk *fchunk, unsigned int *nfchunks)
 444 {
 445         int i;
 446         for (i = 0; i < *nfchunks; i++)
 447                 kfree(fchunk[i].data);
 448
 449         *nfchunks = 0;
 450         memset(fchunk, 0, sizeof(*fchunk));
 451
 452 }
 453
 454 /*----------------------------------------------------------------
 455 * free_srecs
 456 *
 457 * Clears the srec data structures in preparation for a new file.
 458 *
 459 * Arguments:
 460 *       none
 461 *
 462 * Returns:
 463 *       nothing
 464 ----------------------------------------------------------------*/
 465 void free_srecs(void)
 466 {
 467         ns3data = 0;
 468         memset(s3data, 0, sizeof(s3data));
 469         ns3plug = 0;
 470         memset(s3plug, 0, sizeof(s3plug));
 471         ns3crc = 0;
 472         memset(s3crc, 0, sizeof(s3crc));
 473         ns3info = 0;
 474         memset(s3info, 0, sizeof(s3info));
 475         startaddr = 0;
 476 }
 477
 478 /*----------------------------------------------------------------
 479 * mkimage
 480 *
 481 * Scans the currently loaded set of S records for data residing
 482 * in contiguous memory regions.  Each contiguous region is then
 483 * made into a 'chunk'.  This function assumes that we're building
 484 * a new chunk list.  Assumes the s3data items are in sorted order.
 485 *
 486 * Arguments:    none
 487 *
 488 * Returns:
 489 *       0       - success
 490 *       ~0      - failure (probably an errno)
 491 ----------------------------------------------------------------*/
 492 int mkimage(struct imgchunk *clist, unsigned int *ccnt)
 493 {
 494         int result = 0;
 495         int i;
 496         int j;
 497         int currchunk = 0;
 498         u32 nextaddr = 0;
 499         u32 s3start;
 500         u32 s3end;
 501         u32 cstart = 0;
 502         u32 cend;
 503         u32 coffset;
 504
 505         /* There may already be data in the chunklist */
 506         *ccnt = 0;
 507
 508         /* Establish the location and size of each chunk */
 509         for (i = 0; i < ns3data; i++) {
 510                 if (s3data[i].addr == nextaddr) {
 511                         /* existing chunk, grow it */
 512                         clist[currchunk].len += s3data[i].len;
 513                         nextaddr += s3data[i].len;
 514                 } else {
 515                         /* New chunk */
 516                         (*ccnt)++;
 517                         currchunk = *ccnt - 1;
 518                         clist[currchunk].addr = s3data[i].addr;
 519                         clist[currchunk].len = s3data[i].len;
 520                         nextaddr = s3data[i].addr + s3data[i].len;
 521                         /* Expand the chunk if there is a CRC record at */
 522                         /* their beginning bound */
 523                         for (j = 0; j < ns3crc; j++) {
 524                                 if (s3crc[j].dowrite &&
 525                                     s3crc[j].addr == clist[currchunk].addr) {
 526                                         clist[currchunk].addr -= 2;
 527                                         clist[currchunk].len += 2;
 528                                 }
 529                         }
 530                 }
 531         }
 532
 533         /* We're currently assuming there aren't any overlapping chunks */
 534         /*  if this proves false, we'll need to add code to coalesce. */
 535
 536         /* Allocate buffer space for chunks */
 537         for (i = 0; i < *ccnt; i++) {
 538                 clist[i].data = kzalloc(clist[i].len, GFP_KERNEL);
 539                 if (clist[i].data == NULL) {
 540                         printk(KERN_ERR
 541                                "failed to allocate image space, exitting.\n");
 542                         return 1;
 543                 }
 544                 pr_debug("chunk[%d]: addr=0x%06x len=%d\n",
 545                          i, clist[i].addr, clist[i].len);
 546         }
 547
 548         /* Copy srec data to chunks */
 549         for (i = 0; i < ns3data; i++) {
 550                 s3start = s3data[i].addr;
 551                 s3end = s3start + s3data[i].len - 1;
 552                 for (j = 0; j < *ccnt; j++) {
 553                         cstart = clist[j].addr;
 554                         cend = cstart + clist[j].len - 1;
 555                         if (s3start >= cstart && s3end <= cend)
 556                                 break;
 557                 }
 558                 if (((unsigned int)j) >= (*ccnt)) {
 559                         printk(KERN_ERR
 560                                "s3rec(a=0x%06x,l=%d), no chunk match, exiting.\n",
 561                                s3start, s3data[i].len);
 562                         return 1;
 563                 }
 564                 coffset = s3start - cstart;
 565                 memcpy(clist[j].data + coffset, s3data[i].data, s3data[i].len);
 566         }
 567
 568         return result;
 569 }
 570
 571 /*----------------------------------------------------------------
 572 * mkpdrlist
 573 *
 574 * Reads a raw PDA and builds an array of pdrec_t structures.
 575 *
 576 * Arguments:
 577 *       pda     buffer containing raw PDA bytes
 578 *       pdrec   ptr to an array of pdrec_t's.  Will be filled on exit.
 579 *       nrec    ptr to a variable that will contain the count of PDRs
 580 *
 581 * Returns:
 582 *       0       - success
 583 *       ~0      - failure (probably an errno)
 584 ----------------------------------------------------------------*/
 585 int mkpdrlist(struct pda *pda)
 586 {
 587         int result = 0;
 588         u16 *pda16 = (u16 *) pda->buf;
 589         int curroff;            /* in 'words' */
 590
 591         pda->nrec = 0;
 592         curroff = 0;
 593         while (curroff < (HFA384x_PDA_LEN_MAX / 2) &&
 594                le16_to_cpu(pda16[curroff + 1]) != HFA384x_PDR_END_OF_PDA) {
 595                 pda->rec[pda->nrec] = (hfa384x_pdrec_t *) &(pda16[curroff]);
 596
 597                 if (le16_to_cpu(pda->rec[pda->nrec]->code) ==
 598                     HFA384x_PDR_NICID) {
 599                         memcpy(&nicid, &pda->rec[pda->nrec]->data.nicid,
 600                                sizeof(nicid));
 601                         nicid.id = le16_to_cpu(nicid.id);
 602                         nicid.variant = le16_to_cpu(nicid.variant);
 603                         nicid.major = le16_to_cpu(nicid.major);
 604                         nicid.minor = le16_to_cpu(nicid.minor);
 605                 }
 606                 if (le16_to_cpu(pda->rec[pda->nrec]->code) ==
 607                     HFA384x_PDR_MFISUPRANGE) {
 608                         memcpy(&rfid, &pda->rec[pda->nrec]->data.mfisuprange,
 609                                sizeof(rfid));
 610                         rfid.id = le16_to_cpu(rfid.id);
 611                         rfid.variant = le16_to_cpu(rfid.variant);
 612                         rfid.bottom = le16_to_cpu(rfid.bottom);
 613                         rfid.top = le16_to_cpu(rfid.top);
 614                 }
 615                 if (le16_to_cpu(pda->rec[pda->nrec]->code) ==
 616                     HFA384x_PDR_CFISUPRANGE) {
 617                         memcpy(&macid, &pda->rec[pda->nrec]->data.cfisuprange,
 618                                sizeof(macid));
 619                         macid.id = le16_to_cpu(macid.id);
 620                         macid.variant = le16_to_cpu(macid.variant);
 621                         macid.bottom = le16_to_cpu(macid.bottom);
 622                         macid.top = le16_to_cpu(macid.top);
 623                 }
 624
 625                 (pda->nrec)++;
 626                 curroff += le16_to_cpu(pda16[curroff]) + 1;
 627
 628         }
 629         if (curroff >= (HFA384x_PDA_LEN_MAX / 2)) {
 630                 printk(KERN_ERR
 631                        "no end record found or invalid lengths in "
 632                        "PDR data, exiting. %x %d\n", curroff, pda->nrec);
 633                 return 1;
 634         }
 635         if (le16_to_cpu(pda16[curroff + 1]) == HFA384x_PDR_END_OF_PDA) {
 636                 pda->rec[pda->nrec] = (hfa384x_pdrec_t *) &(pda16[curroff]);
 637                 (pda->nrec)++;
 638         }
 639         return result;
 640 }
 641
 642 /*----------------------------------------------------------------
 643 * plugimage
 644 *
 645 * Plugs the given image using the given plug records from the given
 646 * PDA and filename.
 647 *
 648 * Arguments:
 649 *       fchunk          Array of image chunks
 650 *       nfchunks        Number of image chunks
 651 *       s3plug          Array of plug records
 652 *       ns3plug         Number of plug records
 653 *       pda             Current pda data
 654 *
 655 * Returns:
 656 *       0       success
 657 *       ~0      failure
 658 ----------------------------------------------------------------*/
 659 int plugimage(struct imgchunk *fchunk, unsigned int nfchunks,
 660               struct s3plugrec *s3plug, unsigned int ns3plug, struct pda *pda)
 661 {
 662         int result = 0;
 663         int i;                  /* plug index */
 664         int j;                  /* index of PDR or -1 if fname plug */
 665         int c;                  /* chunk index */
 666         u32 pstart;
 667         u32 pend;
 668         u32 cstart = 0;
 669         u32 cend;
 670         u32 chunkoff;
 671         u8 *dest;
 672
 673         /* for each plug record */
 674         for (i = 0; i < ns3plug; i++) {
 675                 pstart = s3plug[i].addr;
 676                 pend = s3plug[i].addr + s3plug[i].len;
 677                 /* find the matching PDR (or filename) */
 678                 if (s3plug[i].itemcode != 0xffffffffUL) { /* not filename */
 679                         for (j = 0; j < pda->nrec; j++) {
 680                                 if (s3plug[i].itemcode ==
 681                                     le16_to_cpu(pda->rec[j]->code))
 682                                         break;
 683                         }
 684                 } else {
 685                         j = -1;
 686                 }
 687                 if (j >= pda->nrec && j != -1) { /*  if no matching PDR, fail */
 688                         printk(KERN_WARNING
 689                                "warning: Failed to find PDR for "
 690                                "plugrec 0x%04x.\n", s3plug[i].itemcode);
 691                         continue;       /* and move on to the next PDR */
 692 #if 0
 693                         /* MSM: They swear that unless it's the MAC address,
 694                          * the serial number, or the TX calibration records,
 695                          * then there's reasonable defaults in the f/w
 696                          * image.  Therefore, missing PDRs in the card
 697                          * should only be a warning, not fatal.
 698                          * TODO: add fatals for the PDRs mentioned above.
 699                          */
 700                         result = 1;
 701                         continue;
 702 #endif
 703                 }
 704
 705                 /* Validate plug len against PDR len */
 706                 if (j != -1 && s3plug[i].len < le16_to_cpu(pda->rec[j]->len)) {
 707                         printk(KERN_ERR
 708                                "error: Plug vs. PDR len mismatch for "
 709                                "plugrec 0x%04x, abort plugging.\n",
 710                                s3plug[i].itemcode);
 711                         result = 1;
 712                         continue;
 713                 }
 714
 715                 /* Validate plug address against chunk data and identify chunk */
 716                 for (c = 0; c < nfchunks; c++) {
 717                         cstart = fchunk[c].addr;
 718                         cend = fchunk[c].addr + fchunk[c].len;
 719                         if (pstart >= cstart && pend <= cend)
 720                                 break;
 721                 }
 722                 if (c >= nfchunks) {
 723                         printk(KERN_ERR
 724                                "error: Failed to find image chunk for "
 725                                "plugrec 0x%04x.\n", s3plug[i].itemcode);
 726                         result = 1;
 727                         continue;
 728                 }
 729
 730                 /* Plug data */
 731                 chunkoff = pstart - cstart;
 732                 dest = fchunk[c].data + chunkoff;
 733                 pr_debug("Plugging item 0x%04x @ 0x%06x, len=%d, "
 734                          "cnum=%d coff=0x%06x\n",
 735                          s3plug[i].itemcode, pstart, s3plug[i].len,
 736                          c, chunkoff);
 737
 738                 if (j == -1) {  /* plug the filename */
 739                         memset(dest, 0, s3plug[i].len);
 740                         strncpy(dest, PRISM2_USB_FWFILE, s3plug[i].len - 1);
 741                 } else {        /* plug a PDR */
 742                         memcpy(dest, &(pda->rec[j]->data), s3plug[i].len);
 743                 }
 744         }
 745         return result;
 746
 747 }
 748
 749 /*----------------------------------------------------------------
 750 * read_cardpda
 751 *
 752 * Sends the command for the driver to read the pda from the card
 753 * named in the device variable.  Upon success, the card pda is
 754 * stored in the "cardpda" variables.  Note that the pda structure
 755 * is considered 'well formed' after this function.  That means
 756 * that the nrecs is valid, the rec array has been set up, and there's
 757 * a valid PDAEND record in the raw PDA data.
 758 *
 759 * Arguments:
 760 *       pda             pda structure
 761 *       wlandev         device
 762 *
 763 * Returns:
 764 *       0       - success
 765 *       ~0      - failure (probably an errno)
 766 ----------------------------------------------------------------*/
 767 int read_cardpda(struct pda *pda, wlandevice_t *wlandev)
 768 {
 769         int result = 0;
 770         struct p80211msg_p2req_readpda msg;
 771
 772         /* set up the msg */
 773         msg.msgcode = DIDmsg_p2req_readpda;
 774         msg.msglen = sizeof(msg);
 775         strcpy(msg.devname, wlandev->name);
 776         msg.pda.did = DIDmsg_p2req_readpda_pda;
 777         msg.pda.len = HFA384x_PDA_LEN_MAX;
 778         msg.pda.status = P80211ENUM_msgitem_status_no_value;
 779         msg.resultcode.did = DIDmsg_p2req_readpda_resultcode;
 780         msg.resultcode.len = sizeof(u32);
 781         msg.resultcode.status = P80211ENUM_msgitem_status_no_value;
 782
 783         if (prism2mgmt_readpda(wlandev, &msg) != 0) {
 784                 /* prism2mgmt_readpda prints an errno if appropriate */
 785                 result = -1;
 786         } else if (msg.resultcode.data == P80211ENUM_resultcode_success) {
 787                 memcpy(pda->buf, msg.pda.data, HFA384x_PDA_LEN_MAX);
 788                 result = mkpdrlist(pda);
 789         } else {
 790                 /* resultcode must've been something other than success */
 791                 result = -1;
 792         }
 793
 794         return result;
 795 }
 796
 797 /*----------------------------------------------------------------
 798 * read_fwfile
 799 *
 800 * Reads the given fw file which should have been compiled from an srec
 801 * file. Each record in the fw file will either be a plain data record,
 802 * a start address record, or other records used for plugging.
 803 *
 804 * Note that data records are expected to be sorted into
 805 * ascending address order in the fw file.
 806 *
 807 * Note also that the start address record, originally an S7 record in
 808 * the srec file, is expected in the fw file to be like a data record but
 809 * with a certain address to make it identiable.
 810 *
 811 * Here's the SREC format that the fw should have come from:
 812 * S[37]nnaaaaaaaaddd...dddcc
 813 *
 814 *       nn - number of bytes starting with the address field
 815 * aaaaaaaa - address in readable (or big endian) format
 816 * dd....dd - 0-245 data bytes (two chars per byte)
 817 *       cc - checksum
 818 *
 819 * The S7 record's (there should be only one) address value gets
 820 * converted to an S3 record with address of 0xff400000, with the
 821 * start address being stored as a 4 byte data word. That address is
 822 * the start execution address used for RAM downloads.
 823 *
 824 * The S3 records have a collection of subformats indicated by the
 825 * value of aaaaaaaa:
 826 *   0xff000000 - Plug record, data field format:
 827 *                xxxxxxxxaaaaaaaassssssss
 828 *                x - PDR code number (little endian)
 829 *                a - Address in load image to plug (little endian)
 830 *                s - Length of plug data area (little endian)
 831 *
 832 *   0xff100000 - CRC16 generation record, data field format:
 833 *                aaaaaaaassssssssbbbbbbbb
 834 *                a - Start address for CRC calculation (little endian)
 835 *                s - Length of data to  calculate over (little endian)
 836 *                b - Boolean, true=write crc, false=don't write
 837 *
 838 *   0xff200000 - Info record, data field format:
 839 *                ssssttttdd..dd
 840 *                s - Size in words (little endian)
 841 *                t - Info type (little endian), see #defines and
 842 *                    struct s3inforec for details about types.
 843 *                d - (s - 1) little endian words giving the contents of
 844 *                    the given info type.
 845 *
 846 *   0xff400000 - Start address record, data field format:
 847 *                aaaaaaaa
 848 *                a - Address in load image to plug (little endian)
 849 *
 850 * Arguments:
 851 *       record  firmware image (ihex record structure) in kernel memory
 852 *
 853 * Returns:
 854 *       0       - success
 855 *       ~0      - failure (probably an errno)
 856 ----------------------------------------------------------------*/
 857 int read_fwfile(const struct ihex_binrec *record)
 858 {
 859         int             i;
 860         int             rcnt = 0;
 861         u16             *tmpinfo;
 862         u16             *ptr16;
 863         u32             *ptr32, len, addr;
 864
 865         pr_debug("Reading fw file ...\n");
 866
 867         while (record) {
 868
 869                 rcnt++;
 870
 871                 len = be16_to_cpu(record->len);
 872                 addr = be32_to_cpu(record->addr);
 873
 874                 /* Point into data for different word lengths */
 875                 ptr32 = (u32 *) record->data;
 876                 ptr16 = (u16 *) record->data;
 877
 878                 /* parse what was an S3 srec and put it in the right array */
 879                 switch (addr) {
 880                 case S3ADDR_START:
 881                         startaddr = *ptr32;
 882                         pr_debug("  S7 start addr, record=%d "
 883                                       " addr=0x%08x\n",
 884                                       rcnt,
 885                                       startaddr);
 886                         break;
 887                 case S3ADDR_PLUG:
 888                         s3plug[ns3plug].itemcode = *ptr32;
 889                         s3plug[ns3plug].addr = *(ptr32 + 1);
 890                         s3plug[ns3plug].len = *(ptr32 + 2);
 891
 892                         pr_debug("  S3 plugrec, record=%d "
 893                                       "itemcode=0x%08x addr=0x%08x len=%d\n",
 894                                       rcnt,
 895                                       s3plug[ns3plug].itemcode,
 896                                       s3plug[ns3plug].addr,
 897                                       s3plug[ns3plug].len);
 898
 899                         ns3plug++;
 900                         if (ns3plug == S3PLUG_MAX) {
 901                                 printk(KERN_ERR "S3 plugrec limit reached - aborting\n");
 902                                 return 1;
 903                         }
 904                         break;
 905                 case S3ADDR_CRC:
 906                         s3crc[ns3crc].addr = *ptr32;
 907                         s3crc[ns3crc].len = *(ptr32 + 1);
 908                         s3crc[ns3crc].dowrite = *(ptr32 + 2);
 909
 910                         pr_debug("  S3 crcrec, record=%d "
 911                                       "addr=0x%08x len=%d write=0x%08x\n",
 912                                       rcnt,
 913                                       s3crc[ns3crc].addr,
 914                                       s3crc[ns3crc].len,
 915                                       s3crc[ns3crc].dowrite);
 916                         ns3crc++;
 917                         if (ns3crc == S3CRC_MAX) {
 918                                 printk(KERN_ERR "S3 crcrec limit reached - aborting\n");
 919                                 return 1;
 920                         }
 921                         break;
 922                 case S3ADDR_INFO:
 923                         s3info[ns3info].len = *ptr16;
 924                         s3info[ns3info].type = *(ptr16 + 1);
 925
 926                         pr_debug("  S3 inforec, record=%d "
 927                               "len=0x%04x type=0x%04x\n",
 928                                       rcnt,
 929                                       s3info[ns3info].len,
 930                                       s3info[ns3info].type);
 931                         if (((s3info[ns3info].len - 1) * sizeof(u16)) > sizeof(s3info[ns3info].info)) {
 932                                 printk(KERN_ERR " S3 inforec length too long - aborting\n");
 933                                 return 1;
 934                         }
 935
 936                         tmpinfo = (u16 *)&(s3info[ns3info].info.version);
 937                         pr_debug("            info=");
 938                         for (i = 0; i < s3info[ns3info].len - 1; i++) {
 939                                 tmpinfo[i] = *(ptr16 + 2 + i);
 940                                 pr_debug("%04x ", tmpinfo[i]);
 941                         }
 942                         pr_debug("\n");
 943
 944                         ns3info++;
 945                         if (ns3info == S3INFO_MAX) {
 946                                 printk(KERN_ERR "S3 inforec limit reached - aborting\n");
 947                                 return 1;
 948                         }
 949                         break;
 950                 default:        /* Data record */
 951                         s3data[ns3data].addr = addr;
 952                         s3data[ns3data].len = len;
 953                         s3data[ns3data].data = (uint8_t *) record->data;
 954                         ns3data++;
 955                         if (ns3data == S3DATA_MAX) {
 956                                 printk(KERN_ERR "S3 datarec limit reached - aborting\n");
 957                                 return 1;
 958                         }
 959                         break;
 960                 }
 961                 record = ihex_next_binrec(record);
 962         }
 963         return 0;
 964 }
 965
 966 /*----------------------------------------------------------------
 967 * writeimage
 968 *
 969 * Takes the chunks, builds p80211 messages and sends them down
 970 * to the driver for writing to the card.
 971 *
 972 * Arguments:
 973 *       wlandev         device
 974 *       fchunk          Array of image chunks
 975 *       nfchunks        Number of image chunks
 976 *
 977 * Returns:
 978 *       0       success
 979 *       ~0      failure
 980 ----------------------------------------------------------------*/
 981 int writeimage(wlandevice_t *wlandev, struct imgchunk *fchunk,
 982                unsigned int nfchunks)
 983 {
 984         int result = 0;
 985         struct p80211msg_p2req_ramdl_state *rstmsg;
 986         struct p80211msg_p2req_ramdl_write *rwrmsg;
 987         u32 resultcode;
 988         int i;
 989         int j;
 990         unsigned int nwrites;
 991         u32 curroff;
 992         u32 currlen;
 993         u32 currdaddr;
 994
 995         rstmsg = kmalloc(sizeof(*rstmsg), GFP_KERNEL);
 996         rwrmsg = kmalloc(sizeof(*rwrmsg), GFP_KERNEL);
 997         if (!rstmsg || !rwrmsg) {
 998                 kfree(rstmsg);
 999                 kfree(rwrmsg);
1000                 printk(KERN_ERR
1001                        "writeimage: no memory for firmware download, "
1002                        "aborting download\n");
1003                 return -ENOMEM;
1004         }
1005
1006         /* Initialize the messages */
1007         memset(rstmsg, 0, sizeof(*rstmsg));
1008         strcpy(rstmsg->devname, wlandev->name);
1009         rstmsg->msgcode = DIDmsg_p2req_ramdl_state;
1010         rstmsg->msglen = sizeof(*rstmsg);
1011         rstmsg->enable.did = DIDmsg_p2req_ramdl_state_enable;
1012         rstmsg->exeaddr.did = DIDmsg_p2req_ramdl_state_exeaddr;
1013         rstmsg->resultcode.did = DIDmsg_p2req_ramdl_state_resultcode;
1014         rstmsg->enable.status = P80211ENUM_msgitem_status_data_ok;
1015         rstmsg->exeaddr.status = P80211ENUM_msgitem_status_data_ok;
1016         rstmsg->resultcode.status = P80211ENUM_msgitem_status_no_value;
1017         rstmsg->enable.len = sizeof(u32);
1018         rstmsg->exeaddr.len = sizeof(u32);
1019         rstmsg->resultcode.len = sizeof(u32);
1020
1021         memset(rwrmsg, 0, sizeof(*rwrmsg));
1022         strcpy(rwrmsg->devname, wlandev->name);
1023         rwrmsg->msgcode = DIDmsg_p2req_ramdl_write;
1024         rwrmsg->msglen = sizeof(*rwrmsg);
1025         rwrmsg->addr.did = DIDmsg_p2req_ramdl_write_addr;
1026         rwrmsg->len.did = DIDmsg_p2req_ramdl_write_len;
1027         rwrmsg->data.did = DIDmsg_p2req_ramdl_write_data;
1028         rwrmsg->resultcode.did = DIDmsg_p2req_ramdl_write_resultcode;
1029         rwrmsg->addr.status = P80211ENUM_msgitem_status_data_ok;
1030         rwrmsg->len.status = P80211ENUM_msgitem_status_data_ok;
1031         rwrmsg->data.status = P80211ENUM_msgitem_status_data_ok;
1032         rwrmsg->resultcode.status = P80211ENUM_msgitem_status_no_value;
1033         rwrmsg->addr.len = sizeof(u32);
1034         rwrmsg->len.len = sizeof(u32);
1035         rwrmsg->data.len = WRITESIZE_MAX;
1036         rwrmsg->resultcode.len = sizeof(u32);
1037
1038         /* Send xxx_state(enable) */
1039         pr_debug("Sending dl_state(enable) message.\n");
1040         rstmsg->enable.data = P80211ENUM_truth_true;
1041         rstmsg->exeaddr.data = startaddr;
1042
1043         result = prism2mgmt_ramdl_state(wlandev, rstmsg);
1044         if (result) {
1045                 printk(KERN_ERR
1046                        "writeimage state enable failed w/ result=%d, "
1047                        "aborting download\n", result);
1048                 goto free_result;
1049         }
1050         resultcode = rstmsg->resultcode.data;
1051         if (resultcode != P80211ENUM_resultcode_success) {
1052                 printk(KERN_ERR
1053                        "writeimage()->xxxdl_state msg indicates failure, "
1054                        "w/ resultcode=%d, aborting download.\n", resultcode);
1055                 result = 1;
1056                 goto free_result;
1057         }
1058
1059         /* Now, loop through the data chunks and send WRITESIZE_MAX data */
1060         for (i = 0; i < nfchunks; i++) {
1061                 nwrites = fchunk[i].len / WRITESIZE_MAX;
1062                 nwrites += (fchunk[i].len % WRITESIZE_MAX) ? 1 : 0;
1063                 curroff = 0;
1064                 for (j = 0; j < nwrites; j++) {
1065                         /* TODO Move this to a separate function */
1066                         int lenleft = fchunk[i].len - (WRITESIZE_MAX * j);
1067                         if (fchunk[i].len > WRITESIZE_MAX)
1068                                 currlen = WRITESIZE_MAX;
1069                         else
1070                                 currlen = lenleft;
1071                         curroff = j * WRITESIZE_MAX;
1072                         currdaddr = fchunk[i].addr + curroff;
1073                         /* Setup the message */
1074                         rwrmsg->addr.data = currdaddr;
1075                         rwrmsg->len.data = currlen;
1076                         memcpy(rwrmsg->data.data,
1077                                fchunk[i].data + curroff, currlen);
1078
1079                         /* Send flashdl_write(pda) */
1080                         pr_debug
1081                             ("Sending xxxdl_write message addr=%06x len=%d.\n",
1082                              currdaddr, currlen);
1083
1084                         result = prism2mgmt_ramdl_write(wlandev, rwrmsg);
1085
1086                         /* Check the results */
1087                         if (result) {
1088                                 printk(KERN_ERR
1089                                        "writeimage chunk write failed w/ result=%d, "
1090                                        "aborting download\n", result);
1091                                 goto free_result;
1092                         }
1093                         resultcode = rstmsg->resultcode.data;
1094                         if (resultcode != P80211ENUM_resultcode_success) {
1095                                 printk(KERN_ERR
1096                                        "writeimage()->xxxdl_write msg indicates failure, "
1097                                        "w/ resultcode=%d, aborting download.\n",
1098                                        resultcode);
1099                                 result = 1;
1100                                 goto free_result;
1101                         }
1102
1103                 }
1104         }
1105
1106         /* Send xxx_state(disable) */
1107         pr_debug("Sending dl_state(disable) message.\n");
1108         rstmsg->enable.data = P80211ENUM_truth_false;
1109         rstmsg->exeaddr.data = 0;
1110
1111         result = prism2mgmt_ramdl_state(wlandev, rstmsg);
1112         if (result) {
1113                 printk(KERN_ERR
1114                        "writeimage state disable failed w/ result=%d, "
1115                        "aborting download\n", result);
1116                 goto free_result;
1117         }
1118         resultcode = rstmsg->resultcode.data;
1119         if (resultcode != P80211ENUM_resultcode_success) {
1120                 printk(KERN_ERR
1121                        "writeimage()->xxxdl_state msg indicates failure, "
1122                        "w/ resultcode=%d, aborting download.\n", resultcode);
1123                 result = 1;
1124                 goto free_result;
1125         }
1126
1127 free_result:
1128         kfree(rstmsg);
1129         kfree(rwrmsg);
1130         return result;
1131 }
1132
1133 int validate_identity(void)
1134 {
1135         int i;
1136         int result = 1;
1137         int trump = 0;
1138
1139         pr_debug("NIC ID: %#x v%d.%d.%d\n",
1140                  nicid.id, nicid.major, nicid.minor, nicid.variant);
1141         pr_debug("MFI ID: %#x v%d %d->%d\n",
1142                  rfid.id, rfid.variant, rfid.bottom, rfid.top);
1143         pr_debug("CFI ID: %#x v%d %d->%d\n",
1144                  macid.id, macid.variant, macid.bottom, macid.top);
1145         pr_debug("PRI ID: %#x v%d %d->%d\n",
1146                  priid.id, priid.variant, priid.bottom, priid.top);
1147
1148         for (i = 0; i < ns3info; i++) {
1149                 switch (s3info[i].type) {
1150                 case 1:
1151                         pr_debug("Version:  ID %#x %d.%d.%d\n",
1152                                  s3info[i].info.version.id,
1153                                  s3info[i].info.version.major,
1154                                  s3info[i].info.version.minor,
1155                                  s3info[i].info.version.variant);
1156                         break;
1157                 case 2:
1158                         pr_debug("Compat: Role %#x Id %#x v%d %d->%d\n",
1159                                  s3info[i].info.compat.role,
1160                                  s3info[i].info.compat.id,
1161                                  s3info[i].info.compat.variant,
1162                                  s3info[i].info.compat.bottom,
1163                                  s3info[i].info.compat.top);
1164
1165                         /* MAC compat range */
1166                         if ((s3info[i].info.compat.role == 1) &&
1167                             (s3info[i].info.compat.id == 2)) {
1168                                 if (s3info[i].info.compat.variant !=
1169                                     macid.variant) {
1170                                         result = 2;
1171                                 }
1172                         }
1173
1174                         /* PRI compat range */
1175                         if ((s3info[i].info.compat.role == 1) &&
1176                             (s3info[i].info.compat.id == 3)) {
1177                                 if ((s3info[i].info.compat.bottom > priid.top)
1178                                     || (s3info[i].info.compat.top <
1179                                         priid.bottom)) {
1180                                         result = 3;
1181                                 }
1182                         }
1183                         /* SEC compat range */
1184                         if ((s3info[i].info.compat.role == 1) &&
1185                             (s3info[i].info.compat.id == 4)) {
1186                                 /* FIXME: isn't something missing here? */
1187                         }
1188
1189                         break;
1190                 case 3:
1191                         pr_debug("Seq: %#x\n", s3info[i].info.buildseq);
1192
1193                         break;
1194                 case 4:
1195                         pr_debug("Platform:  ID %#x %d.%d.%d\n",
1196                                  s3info[i].info.version.id,
1197                                  s3info[i].info.version.major,
1198                                  s3info[i].info.version.minor,
1199                                  s3info[i].info.version.variant);
1200
1201                         if (nicid.id != s3info[i].info.version.id)
1202                                 continue;
1203                         if (nicid.major != s3info[i].info.version.major)
1204                                 continue;
1205                         if (nicid.minor != s3info[i].info.version.minor)
1206                                 continue;
1207                         if ((nicid.variant != s3info[i].info.version.variant) &&
1208                             (nicid.id != 0x8008))
1209                                 continue;
1210
1211                         trump = 1;
1212                         break;
1213                 case 0x8001:
1214                         pr_debug("name inforec len %d\n", s3info[i].len);
1215
1216                         break;
1217                 default:
1218                         pr_debug("Unknown inforec type %d\n", s3info[i].type);
1219                 }
1220         }
1221         /* walk through */
1222
1223         if (trump && (result != 2))
1224                 result = 0;
1225         return result;
1226 }