drivers/staging/rts5208/rtsx.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Driver for Realtek PCI-Express card reader
   4  *
   5  * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
   6  *
   7  * Author:
   8  *   Wei WANG (wei_wang@realsil.com.cn)
   9  *   Micky Ching (micky_ching@realsil.com.cn)
  10  */
  11
  12 #include <linux/blkdev.h>
  13 #include <linux/kthread.h>
  14 #include <linux/sched.h>
  15 #include <linux/workqueue.h>
  16
  17 #include "rtsx.h"
  18 #include "ms.h"
  19 #include "sd.h"
  20 #include "xd.h"
  21
  22 MODULE_DESCRIPTION("Realtek PCI-Express card reader rts5208/rts5288 driver");
  23 MODULE_LICENSE("GPL");
  24
  25 static unsigned int delay_use = 1;
  26 module_param(delay_use, uint, 0644);
  27 MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
  28
  29 static int ss_en;
  30 module_param(ss_en, int, 0644);
  31 MODULE_PARM_DESC(ss_en, "enable selective suspend");
  32
  33 static int ss_interval = 50;
  34 module_param(ss_interval, int, 0644);
  35 MODULE_PARM_DESC(ss_interval, "Interval to enter ss state in seconds");
  36
  37 static int auto_delink_en;
  38 module_param(auto_delink_en, int, 0644);
  39 MODULE_PARM_DESC(auto_delink_en, "enable auto delink");
  40
  41 static unsigned char aspm_l0s_l1_en;
  42 module_param(aspm_l0s_l1_en, byte, 0644);
  43 MODULE_PARM_DESC(aspm_l0s_l1_en, "enable device aspm");
  44
  45 static int msi_en;
  46 module_param(msi_en, int, 0644);
  47 MODULE_PARM_DESC(msi_en, "enable msi");
  48
  49 static irqreturn_t rtsx_interrupt(int irq, void *dev_id);
  50
  51 /***********************************************************************
  52  * Host functions
  53  ***********************************************************************/
  54
  55 static const char *host_info(struct Scsi_Host *host)
  56 {
  57         return "SCSI emulation for PCI-Express Mass Storage devices";
  58 }
  59
  60 static int slave_alloc(struct scsi_device *sdev)
  61 {
  62         /*
  63          * Set the INQUIRY transfer length to 36.  We don't use any of
  64          * the extra data and many devices choke if asked for more or
  65          * less than 36 bytes.
  66          */
  67         sdev->inquiry_len = 36;
  68         return 0;
  69 }
  70
  71 static int slave_configure(struct scsi_device *sdev)
  72 {
  73         /*
  74          * Scatter-gather buffers (all but the last) must have a length
  75          * divisible by the bulk maxpacket size.  Otherwise a data packet
  76          * would end up being short, causing a premature end to the data
  77          * transfer.  Since high-speed bulk pipes have a maxpacket size
  78          * of 512, we'll use that as the scsi device queue's DMA alignment
  79          * mask.  Guaranteeing proper alignment of the first buffer will
  80          * have the desired effect because, except at the beginning and
  81          * the end, scatter-gather buffers follow page boundaries.
  82          */
  83         blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
  84
  85         /* Set the SCSI level to at least 2.  We'll leave it at 3 if that's
  86          * what is originally reported.  We need this to avoid confusing
  87          * the SCSI layer with devices that report 0 or 1, but need 10-byte
  88          * commands (ala ATAPI devices behind certain bridges, or devices
  89          * which simply have broken INQUIRY data).
  90          *
  91          * NOTE: This means /dev/sg programs (ala cdrecord) will get the
  92          * actual information.  This seems to be the preference for
  93          * programs like that.
  94          *
  95          * NOTE: This also means that /proc/scsi/scsi and sysfs may report
  96          * the actual value or the modified one, depending on where the
  97          * data comes from.
  98          */
  99         if (sdev->scsi_level < SCSI_2) {
 100                 sdev->scsi_level = SCSI_2;
 101                 sdev->sdev_target->scsi_level = SCSI_2;
 102         }
 103
 104         return 0;
 105 }
 106
 107 /***********************************************************************
 108  * /proc/scsi/ functions
 109  ***********************************************************************/
 110
 111 /* we use this macro to help us write into the buffer */
 112 #undef SPRINTF
 113 #define SPRINTF(args...) \
 114         do { \
 115                 if (pos < buffer + length) \
 116                         pos += sprintf(pos, ## args); \
 117         } while (0)
 118
 119 /* queue a command */
 120 /* This is always called with scsi_lock(host) held */
 121 static int queuecommand_lck(struct scsi_cmnd *srb,
 122                             void (*done)(struct scsi_cmnd *))
 123 {
 124         struct rtsx_dev *dev = host_to_rtsx(srb->device->host);
 125         struct rtsx_chip *chip = dev->chip;
 126
 127         /* check for state-transition errors */
 128         if (chip->srb) {
 129                 dev_err(&dev->pci->dev, "Error: chip->srb = %p\n",
 130                         chip->srb);
 131                 return SCSI_MLQUEUE_HOST_BUSY;
 132         }
 133
 134         /* fail the command if we are disconnecting */
 135         if (rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
 136                 dev_info(&dev->pci->dev, "Fail command during disconnect\n");
 137                 srb->result = DID_NO_CONNECT << 16;
 138                 done(srb);
 139                 return 0;
 140         }
 141
 142         /* enqueue the command and wake up the control thread */
 143         srb->scsi_done = done;
 144         chip->srb = srb;
 145         complete(&dev->cmnd_ready);
 146
 147         return 0;
 148 }
 149
 150 static DEF_SCSI_QCMD(queuecommand)
 151
 152 /***********************************************************************
 153  * Error handling functions
 154  ***********************************************************************/
 155
 156 /* Command timeout and abort */
 157 static int command_abort(struct scsi_cmnd *srb)
 158 {
 159         struct Scsi_Host *host = srb->device->host;
 160         struct rtsx_dev *dev = host_to_rtsx(host);
 161         struct rtsx_chip *chip = dev->chip;
 162
 163         dev_info(&dev->pci->dev, "%s called\n", __func__);
 164
 165         scsi_lock(host);
 166
 167         /* Is this command still active? */
 168         if (chip->srb != srb) {
 169                 scsi_unlock(host);
 170                 dev_info(&dev->pci->dev, "-- nothing to abort\n");
 171                 return FAILED;
 172         }
 173
 174         rtsx_set_stat(chip, RTSX_STAT_ABORT);
 175
 176         scsi_unlock(host);
 177
 178         /* Wait for the aborted command to finish */
 179         wait_for_completion(&dev->notify);
 180
 181         return SUCCESS;
 182 }
 183
 184 /*
 185  * This invokes the transport reset mechanism to reset the state of the
 186  * device
 187  */
 188 static int device_reset(struct scsi_cmnd *srb)
 189 {
 190         struct rtsx_dev *dev = host_to_rtsx(srb->device->host);
 191
 192         dev_info(&dev->pci->dev, "%s called\n", __func__);
 193
 194         return SUCCESS;
 195 }
 196
 197 /*
 198  * this defines our host template, with which we'll allocate hosts
 199  */
 200
 201 static struct scsi_host_template rtsx_host_template = {
 202         /* basic userland interface stuff */
 203         .name =                         CR_DRIVER_NAME,
 204         .proc_name =                    CR_DRIVER_NAME,
 205         .info =                         host_info,
 206
 207         /* command interface -- queued only */
 208         .queuecommand =                 queuecommand,
 209
 210         /* error and abort handlers */
 211         .eh_abort_handler =             command_abort,
 212         .eh_device_reset_handler =      device_reset,
 213
 214         /* queue commands only, only one command per LUN */
 215         .can_queue =                    1,
 216
 217         /* unknown initiator id */
 218         .this_id =                      -1,
 219
 220         .slave_alloc =                  slave_alloc,
 221         .slave_configure =              slave_configure,
 222
 223         /* lots of sg segments can be handled */
 224         .sg_tablesize =                 SG_ALL,
 225
 226         /* limit the total size of a transfer to 120 KB */
 227         .max_sectors =                  240,
 228
 229         /* emulated HBA */
 230         .emulated =                     1,
 231
 232         /* we do our own delay after a device or bus reset */
 233         .skip_settle_delay =            1,
 234
 235         /* module management */
 236         .module =                       THIS_MODULE
 237 };
 238
 239 static int rtsx_acquire_irq(struct rtsx_dev *dev)
 240 {
 241         struct rtsx_chip *chip = dev->chip;
 242
 243         dev_info(&dev->pci->dev, "%s: chip->msi_en = %d, pci->irq = %d\n",
 244                  __func__, chip->msi_en, dev->pci->irq);
 245
 246         if (request_irq(dev->pci->irq, rtsx_interrupt,
 247                         chip->msi_en ? 0 : IRQF_SHARED,
 248                         CR_DRIVER_NAME, dev)) {
 249                 dev_err(&dev->pci->dev,
 250                         "rtsx: unable to grab IRQ %d, disabling device\n",
 251                         dev->pci->irq);
 252                 return -1;
 253         }
 254
 255         dev->irq = dev->pci->irq;
 256         pci_intx(dev->pci, !chip->msi_en);
 257
 258         return 0;
 259 }
 260
 261 #ifdef CONFIG_PM
 262 /*
 263  * power management
 264  */
 265 static int rtsx_suspend(struct pci_dev *pci, pm_message_t state)
 266 {
 267         struct rtsx_dev *dev = pci_get_drvdata(pci);
 268         struct rtsx_chip *chip;
 269
 270         if (!dev)
 271                 return 0;
 272
 273         /* lock the device pointers */
 274         mutex_lock(&dev->dev_mutex);
 275
 276         chip = dev->chip;
 277
 278         rtsx_do_before_power_down(chip, PM_S3);
 279
 280         if (dev->irq >= 0) {
 281                 free_irq(dev->irq, (void *)dev);
 282                 dev->irq = -1;
 283         }
 284
 285         if (chip->msi_en)
 286                 pci_disable_msi(pci);
 287
 288         pci_save_state(pci);
 289         pci_enable_wake(pci, pci_choose_state(pci, state), 1);
 290         pci_disable_device(pci);
 291         pci_set_power_state(pci, pci_choose_state(pci, state));
 292
 293         /* unlock the device pointers */
 294         mutex_unlock(&dev->dev_mutex);
 295
 296         return 0;
 297 }
 298
 299 static int rtsx_resume(struct pci_dev *pci)
 300 {
 301         struct rtsx_dev *dev = pci_get_drvdata(pci);
 302         struct rtsx_chip *chip;
 303
 304         if (!dev)
 305                 return 0;
 306
 307         chip = dev->chip;
 308
 309         /* lock the device pointers */
 310         mutex_lock(&dev->dev_mutex);
 311
 312         pci_set_power_state(pci, PCI_D0);
 313         pci_restore_state(pci);
 314         if (pci_enable_device(pci) < 0) {
 315                 dev_err(&dev->pci->dev,
 316                         "%s: pci_enable_device failed, disabling device\n",
 317                         CR_DRIVER_NAME);
 318                 /* unlock the device pointers */
 319                 mutex_unlock(&dev->dev_mutex);
 320                 return -EIO;
 321         }
 322         pci_set_master(pci);
 323
 324         if (chip->msi_en) {
 325                 if (pci_enable_msi(pci) < 0)
 326                         chip->msi_en = 0;
 327         }
 328
 329         if (rtsx_acquire_irq(dev) < 0) {
 330                 /* unlock the device pointers */
 331                 mutex_unlock(&dev->dev_mutex);
 332                 return -EIO;
 333         }
 334
 335         rtsx_write_register(chip, HOST_SLEEP_STATE, 0x03, 0x00);
 336         rtsx_init_chip(chip);
 337
 338         /* unlock the device pointers */
 339         mutex_unlock(&dev->dev_mutex);
 340
 341         return 0;
 342 }
 343 #endif /* CONFIG_PM */
 344
 345 static void rtsx_shutdown(struct pci_dev *pci)
 346 {
 347         struct rtsx_dev *dev = pci_get_drvdata(pci);
 348         struct rtsx_chip *chip;
 349
 350         if (!dev)
 351                 return;
 352
 353         chip = dev->chip;
 354
 355         rtsx_do_before_power_down(chip, PM_S1);
 356
 357         if (dev->irq >= 0) {
 358                 free_irq(dev->irq, (void *)dev);
 359                 dev->irq = -1;
 360         }
 361
 362         if (chip->msi_en)
 363                 pci_disable_msi(pci);
 364
 365         pci_disable_device(pci);
 366 }
 367
 368 static int rtsx_control_thread(void *__dev)
 369 {
 370         struct rtsx_dev *dev = __dev;
 371         struct rtsx_chip *chip = dev->chip;
 372         struct Scsi_Host *host = rtsx_to_host(dev);
 373
 374         for (;;) {
 375                 if (wait_for_completion_interruptible(&dev->cmnd_ready))
 376                         break;
 377
 378                 /* lock the device pointers */
 379                 mutex_lock(&dev->dev_mutex);
 380
 381                 /* if the device has disconnected, we are free to exit */
 382                 if (rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
 383                         dev_info(&dev->pci->dev, "-- rtsx-control exiting\n");
 384                         mutex_unlock(&dev->dev_mutex);
 385                         break;
 386                 }
 387
 388                 /* lock access to the state */
 389                 scsi_lock(host);
 390
 391                 /* has the command aborted ? */
 392                 if (rtsx_chk_stat(chip, RTSX_STAT_ABORT)) {
 393                         chip->srb->result = DID_ABORT << 16;
 394                         goto skip_for_abort;
 395                 }
 396
 397                 scsi_unlock(host);
 398
 399                 /* reject the command if the direction indicator
 400                  * is UNKNOWN
 401                  */
 402                 if (chip->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
 403                         dev_err(&dev->pci->dev, "UNKNOWN data direction\n");
 404                         chip->srb->result = DID_ERROR << 16;
 405                 }
 406
 407                 /* reject if target != 0 or if LUN is higher than
 408                  * the maximum known LUN
 409                  */
 410                 else if (chip->srb->device->id) {
 411                         dev_err(&dev->pci->dev, "Bad target number (%d:%d)\n",
 412                                 chip->srb->device->id,
 413                                 (u8)chip->srb->device->lun);
 414                         chip->srb->result = DID_BAD_TARGET << 16;
 415                 }
 416
 417                 else if (chip->srb->device->lun > chip->max_lun) {
 418                         dev_err(&dev->pci->dev, "Bad LUN (%d:%d)\n",
 419                                 chip->srb->device->id,
 420                                 (u8)chip->srb->device->lun);
 421                         chip->srb->result = DID_BAD_TARGET << 16;
 422                 }
 423
 424                 /* we've got a command, let's do it! */
 425                 else {
 426                         scsi_show_command(chip);
 427                         rtsx_invoke_transport(chip->srb, chip);
 428                 }
 429
 430                 /* lock access to the state */
 431                 scsi_lock(host);
 432
 433                 /* did the command already complete because of a disconnect? */
 434                 if (!chip->srb)
 435                         ;               /* nothing to do */
 436
 437                 /* indicate that the command is done */
 438                 else if (chip->srb->result != DID_ABORT << 16) {
 439                         chip->srb->scsi_done(chip->srb);
 440                 } else {
 441 skip_for_abort:
 442                         dev_err(&dev->pci->dev, "scsi command aborted\n");
 443                 }
 444
 445                 if (rtsx_chk_stat(chip, RTSX_STAT_ABORT)) {
 446                         complete(&dev->notify);
 447
 448                         rtsx_set_stat(chip, RTSX_STAT_IDLE);
 449                 }
 450
 451                 /* finished working on this command */
 452                 chip->srb = NULL;
 453                 scsi_unlock(host);
 454
 455                 /* unlock the device pointers */
 456                 mutex_unlock(&dev->dev_mutex);
 457         } /* for (;;) */
 458
 459         /* notify the exit routine that we're actually exiting now
 460          *
 461          * complete()/wait_for_completion() is similar to up()/down(),
 462          * except that complete() is safe in the case where the structure
 463          * is getting deleted in a parallel mode of execution (i.e. just
 464          * after the down() -- that's necessary for the thread-shutdown
 465          * case.
 466          *
 467          * complete_and_exit() goes even further than this -- it is safe in
 468          * the case that the thread of the caller is going away (not just
 469          * the structure) -- this is necessary for the module-remove case.
 470          * This is important in preemption kernels, which transfer the flow
 471          * of execution immediately upon a complete().
 472          */
 473         complete_and_exit(&dev->control_exit, 0);
 474 }
 475
 476 static int rtsx_polling_thread(void *__dev)
 477 {
 478         struct rtsx_dev *dev = __dev;
 479         struct rtsx_chip *chip = dev->chip;
 480         struct sd_info *sd_card = &chip->sd_card;
 481         struct xd_info *xd_card = &chip->xd_card;
 482         struct ms_info *ms_card = &chip->ms_card;
 483
 484         sd_card->cleanup_counter = 0;
 485         xd_card->cleanup_counter = 0;
 486         ms_card->cleanup_counter = 0;
 487
 488         /* Wait until SCSI scan finished */
 489         wait_timeout((delay_use + 5) * 1000);
 490
 491         for (;;) {
 492                 set_current_state(TASK_INTERRUPTIBLE);
 493                 schedule_timeout(msecs_to_jiffies(POLLING_INTERVAL));
 494
 495                 /* lock the device pointers */
 496                 mutex_lock(&dev->dev_mutex);
 497
 498                 /* if the device has disconnected, we are free to exit */
 499                 if (rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
 500                         dev_info(&dev->pci->dev, "-- rtsx-polling exiting\n");
 501                         mutex_unlock(&dev->dev_mutex);
 502                         break;
 503                 }
 504
 505                 mutex_unlock(&dev->dev_mutex);
 506
 507                 mspro_polling_format_status(chip);
 508
 509                 /* lock the device pointers */
 510                 mutex_lock(&dev->dev_mutex);
 511
 512                 rtsx_polling_func(chip);
 513
 514                 /* unlock the device pointers */
 515                 mutex_unlock(&dev->dev_mutex);
 516         }
 517
 518         complete_and_exit(&dev->polling_exit, 0);
 519 }
 520
 521 /*
 522  * interrupt handler
 523  */
 524 static irqreturn_t rtsx_interrupt(int irq, void *dev_id)
 525 {
 526         struct rtsx_dev *dev = dev_id;
 527         struct rtsx_chip *chip;
 528         int retval;
 529         u32 status;
 530
 531         if (dev)
 532                 chip = dev->chip;
 533         else
 534                 return IRQ_NONE;
 535
 536         if (!chip)
 537                 return IRQ_NONE;
 538
 539         spin_lock(&dev->reg_lock);
 540
 541         retval = rtsx_pre_handle_interrupt(chip);
 542         if (retval == STATUS_FAIL) {
 543                 spin_unlock(&dev->reg_lock);
 544                 if (chip->int_reg == 0xFFFFFFFF)
 545                         return IRQ_HANDLED;
 546                 return IRQ_NONE;
 547         }
 548
 549         status = chip->int_reg;
 550
 551         if (dev->check_card_cd) {
 552                 if (!(dev->check_card_cd & status)) {
 553                         /* card not exist, return TRANS_RESULT_FAIL */
 554                         dev->trans_result = TRANS_RESULT_FAIL;
 555                         if (dev->done)
 556                                 complete(dev->done);
 557                         goto exit;
 558                 }
 559         }
 560
 561         if (status & (NEED_COMPLETE_INT | DELINK_INT)) {
 562                 if (status & (TRANS_FAIL_INT | DELINK_INT)) {
 563                         if (status & DELINK_INT)
 564                                 RTSX_SET_DELINK(chip);
 565                         dev->trans_result = TRANS_RESULT_FAIL;
 566                         if (dev->done)
 567                                 complete(dev->done);
 568                 } else if (status & TRANS_OK_INT) {
 569                         dev->trans_result = TRANS_RESULT_OK;
 570                         if (dev->done)
 571                                 complete(dev->done);
 572                 } else if (status & DATA_DONE_INT) {
 573                         dev->trans_result = TRANS_NOT_READY;
 574                         if (dev->done && (dev->trans_state == STATE_TRANS_SG))
 575                                 complete(dev->done);
 576                 }
 577         }
 578
 579 exit:
 580         spin_unlock(&dev->reg_lock);
 581         return IRQ_HANDLED;
 582 }
 583
 584 /* Release all our dynamic resources */
 585 static void rtsx_release_resources(struct rtsx_dev *dev)
 586 {
 587         dev_info(&dev->pci->dev, "-- %s\n", __func__);
 588
 589         /* Tell the control thread to exit.  The SCSI host must
 590          * already have been removed so it won't try to queue
 591          * any more commands.
 592          */
 593         dev_info(&dev->pci->dev, "-- sending exit command to thread\n");
 594         complete(&dev->cmnd_ready);
 595         if (dev->ctl_thread)
 596                 wait_for_completion(&dev->control_exit);
 597         if (dev->polling_thread)
 598                 wait_for_completion(&dev->polling_exit);
 599
 600         wait_timeout(200);
 601
 602         if (dev->rtsx_resv_buf) {
 603                 dev->chip->host_cmds_ptr = NULL;
 604                 dev->chip->host_sg_tbl_ptr = NULL;
 605         }
 606
 607         if (dev->irq > 0)
 608                 free_irq(dev->irq, (void *)dev);
 609         if (dev->chip->msi_en)
 610                 pci_disable_msi(dev->pci);
 611         if (dev->remap_addr)
 612                 iounmap(dev->remap_addr);
 613
 614         rtsx_release_chip(dev->chip);
 615         kfree(dev->chip);
 616 }
 617
 618 /*
 619  * First stage of disconnect processing: stop all commands and remove
 620  * the host
 621  */
 622 static void quiesce_and_remove_host(struct rtsx_dev *dev)
 623 {
 624         struct Scsi_Host *host = rtsx_to_host(dev);
 625         struct rtsx_chip *chip = dev->chip;
 626
 627         /*
 628          * Prevent new transfers, stop the current command, and
 629          * interrupt a SCSI-scan or device-reset delay
 630          */
 631         mutex_lock(&dev->dev_mutex);
 632         scsi_lock(host);
 633         rtsx_set_stat(chip, RTSX_STAT_DISCONNECT);
 634         scsi_unlock(host);
 635         mutex_unlock(&dev->dev_mutex);
 636         wake_up(&dev->delay_wait);
 637         wait_for_completion(&dev->scanning_done);
 638
 639         /* Wait some time to let other threads exist */
 640         wait_timeout(100);
 641
 642         /*
 643          * queuecommand won't accept any new commands and the control
 644          * thread won't execute a previously-queued command.  If there
 645          * is such a command pending, complete it with an error.
 646          */
 647         mutex_lock(&dev->dev_mutex);
 648         if (chip->srb) {
 649                 chip->srb->result = DID_NO_CONNECT << 16;
 650                 scsi_lock(host);
 651                 chip->srb->scsi_done(dev->chip->srb);
 652                 chip->srb = NULL;
 653                 scsi_unlock(host);
 654         }
 655         mutex_unlock(&dev->dev_mutex);
 656
 657         /* Now we own no commands so it's safe to remove the SCSI host */
 658         scsi_remove_host(host);
 659 }
 660
 661 /* Second stage of disconnect processing: deallocate all resources */
 662 static void release_everything(struct rtsx_dev *dev)
 663 {
 664         rtsx_release_resources(dev);
 665
 666         /*
 667          * Drop our reference to the host; the SCSI core will free it
 668          * when the refcount becomes 0.
 669          */
 670         scsi_host_put(rtsx_to_host(dev));
 671 }
 672
 673 /* Thread to carry out delayed SCSI-device scanning */
 674 static int rtsx_scan_thread(void *__dev)
 675 {
 676         struct rtsx_dev *dev = __dev;
 677         struct rtsx_chip *chip = dev->chip;
 678
 679         /* Wait for the timeout to expire or for a disconnect */
 680         if (delay_use > 0) {
 681                 dev_info(&dev->pci->dev,
 682                          "%s: waiting for device to settle before scanning\n",
 683                          CR_DRIVER_NAME);
 684                 wait_event_interruptible_timeout
 685                         (dev->delay_wait,
 686                          rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT),
 687                          delay_use * HZ);
 688         }
 689
 690         /* If the device is still connected, perform the scanning */
 691         if (!rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
 692                 scsi_scan_host(rtsx_to_host(dev));
 693                 dev_info(&dev->pci->dev, "%s: device scan complete\n",
 694                          CR_DRIVER_NAME);
 695
 696                 /* Should we unbind if no devices were detected? */
 697         }
 698
 699         complete_and_exit(&dev->scanning_done, 0);
 700 }
 701
 702 static void rtsx_init_options(struct rtsx_chip *chip)
 703 {
 704         chip->vendor_id = chip->rtsx->pci->vendor;
 705         chip->product_id = chip->rtsx->pci->device;
 706         chip->adma_mode = 1;
 707         chip->lun_mc = 0;
 708         chip->driver_first_load = 1;
 709 #ifdef HW_AUTO_SWITCH_SD_BUS
 710         chip->sdio_in_charge = 0;
 711 #endif
 712
 713         chip->mspro_formatter_enable = 1;
 714         chip->ignore_sd = 0;
 715         chip->use_hw_setting = 0;
 716         chip->lun_mode = DEFAULT_SINGLE;
 717         chip->auto_delink_en = auto_delink_en;
 718         chip->ss_en = ss_en;
 719         chip->ss_idle_period = ss_interval * 1000;
 720         chip->remote_wakeup_en = 0;
 721         chip->aspm_l0s_l1_en = aspm_l0s_l1_en;
 722         chip->dynamic_aspm = 1;
 723         chip->fpga_sd_sdr104_clk = CLK_200;
 724         chip->fpga_sd_ddr50_clk = CLK_100;
 725         chip->fpga_sd_sdr50_clk = CLK_100;
 726         chip->fpga_sd_hs_clk = CLK_100;
 727         chip->fpga_mmc_52m_clk = CLK_80;
 728         chip->fpga_ms_hg_clk = CLK_80;
 729         chip->fpga_ms_4bit_clk = CLK_80;
 730         chip->fpga_ms_1bit_clk = CLK_40;
 731         chip->asic_sd_sdr104_clk = 203;
 732         chip->asic_sd_sdr50_clk = 98;
 733         chip->asic_sd_ddr50_clk = 98;
 734         chip->asic_sd_hs_clk = 98;
 735         chip->asic_mmc_52m_clk = 98;
 736         chip->asic_ms_hg_clk = 117;
 737         chip->asic_ms_4bit_clk = 78;
 738         chip->asic_ms_1bit_clk = 39;
 739         chip->ssc_depth_sd_sdr104 = SSC_DEPTH_2M;
 740         chip->ssc_depth_sd_sdr50 = SSC_DEPTH_2M;
 741         chip->ssc_depth_sd_ddr50 = SSC_DEPTH_1M;
 742         chip->ssc_depth_sd_hs = SSC_DEPTH_1M;
 743         chip->ssc_depth_mmc_52m = SSC_DEPTH_1M;
 744         chip->ssc_depth_ms_hg = SSC_DEPTH_1M;
 745         chip->ssc_depth_ms_4bit = SSC_DEPTH_512K;
 746         chip->ssc_depth_low_speed = SSC_DEPTH_512K;
 747         chip->ssc_en = 1;
 748         chip->sd_speed_prior = 0x01040203;
 749         chip->sd_current_prior = 0x00010203;
 750         chip->sd_ctl = SD_PUSH_POINT_AUTO |
 751                        SD_SAMPLE_POINT_AUTO |
 752                        SUPPORT_MMC_DDR_MODE;
 753         chip->sd_ddr_tx_phase = 0;
 754         chip->mmc_ddr_tx_phase = 1;
 755         chip->sd_default_tx_phase = 15;
 756         chip->sd_default_rx_phase = 15;
 757         chip->pmos_pwr_on_interval = 200;
 758         chip->sd_voltage_switch_delay = 1000;
 759         chip->ms_power_class_en = 3;
 760
 761         chip->sd_400mA_ocp_thd = 1;
 762         chip->sd_800mA_ocp_thd = 5;
 763         chip->ms_ocp_thd = 2;
 764
 765         chip->card_drive_sel = 0x55;
 766         chip->sd30_drive_sel_1v8 = 0x03;
 767         chip->sd30_drive_sel_3v3 = 0x01;
 768
 769         chip->do_delink_before_power_down = 1;
 770         chip->auto_power_down = 1;
 771         chip->polling_config = 0;
 772
 773         chip->force_clkreq_0 = 1;
 774         chip->ft2_fast_mode = 0;
 775
 776         chip->sdio_retry_cnt = 1;
 777
 778         chip->xd_timeout = 2000;
 779         chip->sd_timeout = 10000;
 780         chip->ms_timeout = 2000;
 781         chip->mspro_timeout = 15000;
 782
 783         chip->power_down_in_ss = 1;
 784
 785         chip->sdr104_en = 1;
 786         chip->sdr50_en = 1;
 787         chip->ddr50_en = 1;
 788
 789         chip->delink_stage1_step = 100;
 790         chip->delink_stage2_step = 40;
 791         chip->delink_stage3_step = 20;
 792
 793         chip->auto_delink_in_L1 = 1;
 794         chip->blink_led = 1;
 795         chip->msi_en = msi_en;
 796         chip->hp_watch_bios_hotplug = 0;
 797         chip->max_payload = 0;
 798         chip->phy_voltage = 0;
 799
 800         chip->support_ms_8bit = 1;
 801         chip->s3_pwr_off_delay = 1000;
 802 }
 803
 804 static int rtsx_probe(struct pci_dev *pci,
 805                       const struct pci_device_id *pci_id)
 806 {
 807         struct Scsi_Host *host;
 808         struct rtsx_dev *dev;
 809         int err = 0;
 810         struct task_struct *th;
 811
 812         dev_dbg(&pci->dev, "Realtek PCI-E card reader detected\n");
 813
 814         err = pcim_enable_device(pci);
 815         if (err < 0) {
 816                 dev_err(&pci->dev, "PCI enable device failed!\n");
 817                 return err;
 818         }
 819
 820         err = pci_request_regions(pci, CR_DRIVER_NAME);
 821         if (err < 0) {
 822                 dev_err(&pci->dev, "PCI request regions for %s failed!\n",
 823                         CR_DRIVER_NAME);
 824                 return err;
 825         }
 826
 827         /*
 828          * Ask the SCSI layer to allocate a host structure, with extra
 829          * space at the end for our private rtsx_dev structure.
 830          */
 831         host = scsi_host_alloc(&rtsx_host_template, sizeof(*dev));
 832         if (!host) {
 833                 dev_err(&pci->dev, "Unable to allocate the scsi host\n");
 834                 return -ENOMEM;
 835         }
 836
 837         dev = host_to_rtsx(host);
 838         memset(dev, 0, sizeof(struct rtsx_dev));
 839
 840         dev->chip = kzalloc(sizeof(*dev->chip), GFP_KERNEL);
 841         if (!dev->chip) {
 842                 err = -ENOMEM;
 843                 goto chip_alloc_fail;
 844         }
 845
 846         spin_lock_init(&dev->reg_lock);
 847         mutex_init(&dev->dev_mutex);
 848         init_completion(&dev->cmnd_ready);
 849         init_completion(&dev->control_exit);
 850         init_completion(&dev->polling_exit);
 851         init_completion(&dev->notify);
 852         init_completion(&dev->scanning_done);
 853         init_waitqueue_head(&dev->delay_wait);
 854
 855         dev->pci = pci;
 856         dev->irq = -1;
 857
 858         dev_info(&pci->dev, "Resource length: 0x%x\n",
 859                  (unsigned int)pci_resource_len(pci, 0));
 860         dev->addr = pci_resource_start(pci, 0);
 861         dev->remap_addr = ioremap_nocache(dev->addr, pci_resource_len(pci, 0));
 862         if (!dev->remap_addr) {
 863                 dev_err(&pci->dev, "ioremap error\n");
 864                 err = -ENXIO;
 865                 goto ioremap_fail;
 866         }
 867
 868         /*
 869          * Using "unsigned long" cast here to eliminate gcc warning in
 870          * 64-bit system
 871          */
 872         dev_info(&pci->dev, "Original address: 0x%lx, remapped address: 0x%lx\n",
 873                  (unsigned long)(dev->addr), (unsigned long)(dev->remap_addr));
 874
 875         dev->rtsx_resv_buf = dmam_alloc_coherent(&pci->dev, RTSX_RESV_BUF_LEN,
 876                         &dev->rtsx_resv_buf_addr, GFP_KERNEL);
 877         if (!dev->rtsx_resv_buf) {
 878                 dev_err(&pci->dev, "alloc dma buffer fail\n");
 879                 err = -ENXIO;
 880                 goto dma_alloc_fail;
 881         }
 882         dev->chip->host_cmds_ptr = dev->rtsx_resv_buf;
 883         dev->chip->host_cmds_addr = dev->rtsx_resv_buf_addr;
 884         dev->chip->host_sg_tbl_ptr = dev->rtsx_resv_buf + HOST_CMDS_BUF_LEN;
 885         dev->chip->host_sg_tbl_addr = dev->rtsx_resv_buf_addr +
 886                                       HOST_CMDS_BUF_LEN;
 887
 888         dev->chip->rtsx = dev;
 889
 890         rtsx_init_options(dev->chip);
 891
 892         dev_info(&pci->dev, "pci->irq = %d\n", pci->irq);
 893
 894         if (dev->chip->msi_en) {
 895                 if (pci_enable_msi(pci) < 0)
 896                         dev->chip->msi_en = 0;
 897         }
 898
 899         if (rtsx_acquire_irq(dev) < 0) {
 900                 err = -EBUSY;
 901                 goto irq_acquire_fail;
 902         }
 903
 904         pci_set_master(pci);
 905         synchronize_irq(dev->irq);
 906
 907         rtsx_init_chip(dev->chip);
 908
 909         /*
 910          * set the supported max_lun and max_id for the scsi host
 911          * NOTE: the minimal value of max_id is 1
 912          */
 913         host->max_id = 1;
 914         host->max_lun = dev->chip->max_lun;
 915
 916         /* Start up our control thread */
 917         th = kthread_run(rtsx_control_thread, dev, CR_DRIVER_NAME);
 918         if (IS_ERR(th)) {
 919                 dev_err(&pci->dev, "Unable to start control thread\n");
 920                 err = PTR_ERR(th);
 921                 goto control_thread_fail;
 922         }
 923         dev->ctl_thread = th;
 924
 925         err = scsi_add_host(host, &pci->dev);
 926         if (err) {
 927                 dev_err(&pci->dev, "Unable to add the scsi host\n");
 928                 goto scsi_add_host_fail;
 929         }
 930
 931         /* Start up the thread for delayed SCSI-device scanning */
 932         th = kthread_run(rtsx_scan_thread, dev, "rtsx-scan");
 933         if (IS_ERR(th)) {
 934                 dev_err(&pci->dev, "Unable to start the device-scanning thread\n");
 935                 complete(&dev->scanning_done);
 936                 err = PTR_ERR(th);
 937                 goto scan_thread_fail;
 938         }
 939
 940         /* Start up the thread for polling thread */
 941         th = kthread_run(rtsx_polling_thread, dev, "rtsx-polling");
 942         if (IS_ERR(th)) {
 943                 dev_err(&pci->dev, "Unable to start the device-polling thread\n");
 944                 err = PTR_ERR(th);
 945                 goto scan_thread_fail;
 946         }
 947         dev->polling_thread = th;
 948
 949         pci_set_drvdata(pci, dev);
 950
 951         return 0;
 952
 953         /* We come here if there are any problems */
 954 scan_thread_fail:
 955         quiesce_and_remove_host(dev);
 956 scsi_add_host_fail:
 957         complete(&dev->cmnd_ready);
 958         wait_for_completion(&dev->control_exit);
 959 control_thread_fail:
 960         free_irq(dev->irq, (void *)dev);
 961         rtsx_release_chip(dev->chip);
 962 irq_acquire_fail:
 963         dev->chip->host_cmds_ptr = NULL;
 964         dev->chip->host_sg_tbl_ptr = NULL;
 965         if (dev->chip->msi_en)
 966                 pci_disable_msi(dev->pci);
 967 dma_alloc_fail:
 968         iounmap(dev->remap_addr);
 969 ioremap_fail:
 970         kfree(dev->chip);
 971 chip_alloc_fail:
 972         dev_err(&pci->dev, "%s failed\n", __func__);
 973
 974         return err;
 975 }
 976
 977 static void rtsx_remove(struct pci_dev *pci)
 978 {
 979         struct rtsx_dev *dev = pci_get_drvdata(pci);
 980
 981         dev_info(&pci->dev, "%s called\n", __func__);
 982
 983         quiesce_and_remove_host(dev);
 984         release_everything(dev);
 985 }
 986
 987 /* PCI IDs */
 988 static const struct pci_device_id rtsx_ids[] = {
 989         { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x5208),
 990                 PCI_CLASS_OTHERS << 16, 0xFF0000 },
 991         { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x5288),
 992                 PCI_CLASS_OTHERS << 16, 0xFF0000 },
 993         { 0, },
 994 };
 995
 996 MODULE_DEVICE_TABLE(pci, rtsx_ids);
 997
 998 /* pci_driver definition */
 999 static struct pci_driver rtsx_driver = {
1000         .name = CR_DRIVER_NAME,
1001         .id_table = rtsx_ids,
1002         .probe = rtsx_probe,
1003         .remove = rtsx_remove,
1004 #ifdef CONFIG_PM
1005         .suspend = rtsx_suspend,
1006         .resume = rtsx_resume,
1007 #endif
1008         .shutdown = rtsx_shutdown,
1009 };
1010
1011 module_pci_driver(rtsx_driver);