drivers/staging/rtl8192u/r819xU_firmware.c

   1 /**************************************************************************************************
   2  * Procedure:    Init boot code/firmware code/data session
   3  *
   4  * Description: This routine will initialize firmware. If any error occurs during the initialization
   5  *              process, the routine shall terminate immediately and return fail.
   6  *              NIC driver should call NdisOpenFile only from MiniportInitialize.
   7  *
   8  * Arguments:   The pointer of the adapter
   9
  10  * Returns:
  11  *        NDIS_STATUS_FAILURE - the following initialization process should be terminated
  12  *        NDIS_STATUS_SUCCESS - if firmware initialization process success
  13 **************************************************************************************************/
  14
  15 #include "r8192U.h"
  16 #include "r8192U_hw.h"
  17 #include "r819xU_firmware_img.h"
  18 #include "r819xU_firmware.h"
  19 #include <linux/firmware.h>
  20
  21 static void firmware_init_param(struct net_device *dev)
  22 {
  23         struct r8192_priv       *priv = ieee80211_priv(dev);
  24         rt_firmware             *pfirmware = priv->pFirmware;
  25
  26         pfirmware->cmdpacket_frag_thresold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE);
  27 }
  28
  29 /*
  30  * segment the img and use the ptr and length to remember info on each segment
  31  *
  32  */
  33 static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
  34                              u32 buffer_len)
  35 {
  36         struct r8192_priv   *priv = ieee80211_priv(dev);
  37         bool                rt_status = true;
  38         u16                 frag_threshold;
  39         u16                 frag_length, frag_offset = 0;
  40         int                 i;
  41
  42         rt_firmware         *pfirmware = priv->pFirmware;
  43         struct sk_buff      *skb;
  44         unsigned char       *seg_ptr;
  45         cb_desc             *tcb_desc;
  46         u8                  bLastIniPkt;
  47         u8                  index;
  48
  49         firmware_init_param(dev);
  50         /* Fragmentation might be required */
  51         frag_threshold = pfirmware->cmdpacket_frag_thresold;
  52         do {
  53                 if ((buffer_len - frag_offset) > frag_threshold) {
  54                         frag_length = frag_threshold;
  55                         bLastIniPkt = 0;
  56
  57                 } else {
  58                         frag_length = buffer_len - frag_offset;
  59                         bLastIniPkt = 1;
  60
  61                 }
  62
  63                 /* Allocate skb buffer to contain firmware info and tx descriptor info
  64                  * add 4 to avoid packet appending overflow.
  65                  * */
  66                 skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
  67                 if (!skb)
  68                         return false;
  69                 memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
  70                 tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
  71                 tcb_desc->queue_index = TXCMD_QUEUE;
  72                 tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
  73                 tcb_desc->bLastIniPkt = bLastIniPkt;
  74
  75                 skb_reserve(skb, USB_HWDESC_HEADER_LEN);
  76                 seg_ptr = skb->data;
  77                 /*
  78                  * Transform from little endian to big endian
  79                  * and pending  zero
  80                  */
  81                 for (i = 0; i < frag_length; i += 4) {
  82                         *seg_ptr++ = ((i+0) < frag_length)?code_virtual_address[i+3] : 0;
  83                         *seg_ptr++ = ((i+1) < frag_length)?code_virtual_address[i+2] : 0;
  84                         *seg_ptr++ = ((i+2) < frag_length)?code_virtual_address[i+1] : 0;
  85                         *seg_ptr++ = ((i+3) < frag_length)?code_virtual_address[i+0] : 0;
  86                 }
  87                 tcb_desc->txbuf_size = (u16)i;
  88                 skb_put(skb, i);
  89
  90                 index = tcb_desc->queue_index;
  91                 if (!priv->ieee80211->check_nic_enough_desc(dev, index) ||
  92                        (!skb_queue_empty(&priv->ieee80211->skb_waitQ[index])) ||
  93                        (priv->ieee80211->queue_stop)) {
  94                         RT_TRACE(COMP_FIRMWARE, "=====================================================> tx full!\n");
  95                         skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
  96                 } else {
  97                         priv->ieee80211->softmac_hard_start_xmit(skb, dev);
  98                 }
  99
 100                 code_virtual_address += frag_length;
 101                 frag_offset += frag_length;
 102
 103         } while (frag_offset < buffer_len);
 104
 105         return rt_status;
 106
 107 }
 108
 109 /*
 110  * Procedure:   Check whether main code is download OK. If OK, turn on CPU
 111  *
 112  * Description: CPU register locates in different page against general register.
 113  *          Switch to CPU register in the begin and switch back before return
 114  *
 115  *
 116  * Arguments:   The pointer of the adapter
 117  *
 118  * Returns:
 119  *        NDIS_STATUS_FAILURE - the following initialization process should
 120  *                              be terminated
 121  *        NDIS_STATUS_SUCCESS - if firmware initialization process success
 122  */
 123 static bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
 124 {
 125         bool            rt_status = true;
 126         int             check_putcodeOK_time = 200000, check_bootOk_time = 200000;
 127         u32             CPU_status = 0;
 128
 129         /* Check whether put code OK */
 130         do {
 131                 read_nic_dword(dev, CPU_GEN, &CPU_status);
 132
 133                 if (CPU_status&CPU_GEN_PUT_CODE_OK)
 134                         break;
 135
 136         } while (check_putcodeOK_time--);
 137
 138         if (!(CPU_status&CPU_GEN_PUT_CODE_OK)) {
 139                 RT_TRACE(COMP_ERR, "Download Firmware: Put code fail!\n");
 140                 goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
 141         } else {
 142                 RT_TRACE(COMP_FIRMWARE, "Download Firmware: Put code ok!\n");
 143         }
 144
 145         /* Turn On CPU */
 146         read_nic_dword(dev, CPU_GEN, &CPU_status);
 147         write_nic_byte(dev, CPU_GEN,
 148                        (u8)((CPU_status | CPU_GEN_PWR_STB_CPU) & 0xff));
 149         mdelay(1000);
 150
 151         /* Check whether CPU boot OK */
 152         do {
 153                 read_nic_dword(dev, CPU_GEN, &CPU_status);
 154
 155                 if (CPU_status&CPU_GEN_BOOT_RDY)
 156                         break;
 157         } while (check_bootOk_time--);
 158
 159         if (!(CPU_status&CPU_GEN_BOOT_RDY))
 160                 goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
 161         else
 162                 RT_TRACE(COMP_FIRMWARE, "Download Firmware: Boot ready!\n");
 163
 164         return rt_status;
 165
 166 CPUCheckMainCodeOKAndTurnOnCPU_Fail:
 167         RT_TRACE(COMP_ERR, "ERR in %s()\n", __func__);
 168         rt_status = false;
 169         return rt_status;
 170 }
 171
 172 static bool CPUcheck_firmware_ready(struct net_device *dev)
 173 {
 174
 175         bool            rt_status = true;
 176         int             check_time = 200000;
 177         u32             CPU_status = 0;
 178
 179         /* Check Firmware Ready */
 180         do {
 181                 read_nic_dword(dev, CPU_GEN, &CPU_status);
 182
 183                 if (CPU_status&CPU_GEN_FIRM_RDY)
 184                         break;
 185
 186         } while (check_time--);
 187
 188         if (!(CPU_status&CPU_GEN_FIRM_RDY))
 189                 goto CPUCheckFirmwareReady_Fail;
 190         else
 191                 RT_TRACE(COMP_FIRMWARE, "Download Firmware: Firmware ready!\n");
 192
 193         return rt_status;
 194
 195 CPUCheckFirmwareReady_Fail:
 196         RT_TRACE(COMP_ERR, "ERR in %s()\n", __func__);
 197         rt_status = false;
 198         return rt_status;
 199
 200 }
 201
 202 bool init_firmware(struct net_device *dev)
 203 {
 204         struct r8192_priv       *priv = ieee80211_priv(dev);
 205         bool                    rt_status = true;
 206
 207         u32                     file_length = 0;
 208         u8                      *mapped_file = NULL;
 209         u32                     init_step = 0;
 210         opt_rst_type_e  rst_opt = OPT_SYSTEM_RESET;
 211         firmware_init_step_e    starting_state = FW_INIT_STEP0_BOOT;
 212
 213         rt_firmware             *pfirmware = priv->pFirmware;
 214         const struct firmware   *fw_entry;
 215         const char *fw_name[3] = { "/*(DEBLOBBED)*/",
 216                            "/*(DEBLOBBED)*/",
 217                            "/*(DEBLOBBED)*/"};
 218         int rc;
 219
 220         RT_TRACE(COMP_FIRMWARE, " PlatformInitFirmware()==>\n");
 221
 222         if (pfirmware->firmware_status == FW_STATUS_0_INIT) {
 223                 /* it is called by reset */
 224                 rst_opt = OPT_SYSTEM_RESET;
 225                 starting_state = FW_INIT_STEP0_BOOT;
 226                 /* TODO: system reset */
 227
 228         } else if (pfirmware->firmware_status == FW_STATUS_5_READY) {
 229                 /* it is called by Initialize */
 230                 rst_opt = OPT_FIRMWARE_RESET;
 231                 starting_state = FW_INIT_STEP2_DATA;
 232         } else {
 233                  RT_TRACE(COMP_FIRMWARE, "PlatformInitFirmware: undefined firmware state\n");
 234         }
 235
 236         /*
 237          * Download boot, main, and data image for System reset.
 238          * Download data image for firmware reset
 239          */
 240         for (init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
 241                 /*
 242                  * Open image file, and map file to continuous memory if open file success.
 243                  * or read image file from array. Default load from IMG file
 244                  */
 245                 if (rst_opt == OPT_SYSTEM_RESET) {
 246                         rc = reject_firmware(&fw_entry, fw_name[init_step], &priv->udev->dev);
 247                         if (rc < 0) {
 248                                 RT_TRACE(COMP_ERR, "request firmware fail!\n");
 249                                 goto download_firmware_fail;
 250                         }
 251
 252                         if (fw_entry->size > sizeof(pfirmware->firmware_buf)) {
 253                                 RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n");
 254                                 goto download_firmware_fail;
 255                         }
 256
 257                         if (init_step != FW_INIT_STEP1_MAIN) {
 258                                 memcpy(pfirmware->firmware_buf, fw_entry->data, fw_entry->size);
 259                                 mapped_file = pfirmware->firmware_buf;
 260                                 file_length = fw_entry->size;
 261                         } else {
 262                                 memset(pfirmware->firmware_buf, 0, 128);
 263                                 memcpy(&pfirmware->firmware_buf[128], fw_entry->data, fw_entry->size);
 264                                 mapped_file = pfirmware->firmware_buf;
 265                                 file_length = fw_entry->size + 128;
 266                         }
 267                         pfirmware->firmware_buf_size = file_length;
 268                 } else if (rst_opt == OPT_FIRMWARE_RESET) {
 269                         /* we only need to download data.img here */
 270                         mapped_file = pfirmware->firmware_buf;
 271                         file_length = pfirmware->firmware_buf_size;
 272                 }
 273
 274                 /* Download image file */
 275                 /* The firmware download process is just as following,
 276                  * 1. that is each packet will be segmented and inserted to the wait queue.
 277                  * 2. each packet segment will be put in the skb_buff packet.
 278                  * 3. each skb_buff packet data content will already include the firmware info
 279                  *   and Tx descriptor info
 280                  * */
 281                 rt_status = fw_download_code(dev, mapped_file, file_length);
 282                 if (rst_opt == OPT_SYSTEM_RESET)
 283                         release_firmware(fw_entry);
 284
 285                 if (!rt_status)
 286                         goto download_firmware_fail;
 287
 288                 switch (init_step) {
 289                 case FW_INIT_STEP0_BOOT:
 290                         /* Download boot
 291                          * initialize command descriptor.
 292                          * will set polling bit when firmware code is also configured
 293                          */
 294                         pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
 295                         /* mdelay(1000); */
 296                         /*
 297                          * To initialize IMEM, CPU move code  from 0x80000080,
 298                          * hence, we send 0x80 byte packet
 299                          */
 300                         break;
 301
 302                 case FW_INIT_STEP1_MAIN:
 303                         /* Download firmware code. Wait until Boot Ready and Turn on CPU */
 304                         pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE;
 305
 306                         /* Check Put Code OK and Turn On CPU */
 307                         rt_status = CPUcheck_maincodeok_turnonCPU(dev);
 308                         if (!rt_status) {
 309                                 RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n");
 310                                 goto download_firmware_fail;
 311                         }
 312
 313                         pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU;
 314                         break;
 315
 316                 case FW_INIT_STEP2_DATA:
 317                         /* download initial data code */
 318                         pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE;
 319                         mdelay(1);
 320
 321                         rt_status = CPUcheck_firmware_ready(dev);
 322                         if (!rt_status) {
 323                                 RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n", rt_status);
 324                                 goto download_firmware_fail;
 325                         }
 326
 327                         /* wait until data code is initialized ready.*/
 328                         pfirmware->firmware_status = FW_STATUS_5_READY;
 329                         break;
 330                 }
 331         }
 332
 333         RT_TRACE(COMP_FIRMWARE, "Firmware Download Success\n");
 334         return rt_status;
 335
 336 download_firmware_fail:
 337         RT_TRACE(COMP_ERR, "ERR in %s()\n", __func__);
 338         rt_status = false;
 339         return rt_status;
 340
 341 }
 342
 343 /*(DEBLOBBED)*/