drivers/scsi/qla2xxx/qla_os.c

   1 /*
   2  * QLogic Fibre Channel HBA Driver
   3  * Copyright (c)  2003-2008 QLogic Corporation
   4  *
   5  * See LICENSE.qla2xxx for copyright and licensing details.
   6  */
   7 #include "qla_def.h"
   8
   9 #include <linux/moduleparam.h>
  10 #include <linux/vmalloc.h>
  11 #include <linux/delay.h>
  12 #include <linux/kthread.h>
  13 #include <linux/mutex.h>
  14
  15 #include <scsi/scsi_tcq.h>
  16 #include <scsi/scsicam.h>
  17 #include <scsi/scsi_transport.h>
  18 #include <scsi/scsi_transport_fc.h>
  19
  20 /*
  21  * Driver version
  22  */
  23 char qla2x00_version_str[40];
  24
  25 /*
  26  * SRB allocation cache
  27  */
  28 static struct kmem_cache *srb_cachep;
  29
  30 int ql2xlogintimeout = 20;
  31 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
  32 MODULE_PARM_DESC(ql2xlogintimeout,
  33                 "Login timeout value in seconds.");
  34
  35 int qlport_down_retry;
  36 module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
  37 MODULE_PARM_DESC(qlport_down_retry,
  38                 "Maximum number of command retries to a port that returns "
  39                 "a PORT-DOWN status.");
  40
  41 int ql2xplogiabsentdevice;
  42 module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
  43 MODULE_PARM_DESC(ql2xplogiabsentdevice,
  44                 "Option to enable PLOGI to devices that are not present after "
  45                 "a Fabric scan.  This is needed for several broken switches. "
  46                 "Default is 0 - no PLOGI. 1 - perfom PLOGI.");
  47
  48 int ql2xloginretrycount = 0;
  49 module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
  50 MODULE_PARM_DESC(ql2xloginretrycount,
  51                 "Specify an alternate value for the NVRAM login retry count.");
  52
  53 int ql2xallocfwdump = 1;
  54 module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
  55 MODULE_PARM_DESC(ql2xallocfwdump,
  56                 "Option to enable allocation of memory for a firmware dump "
  57                 "during HBA initialization.  Memory allocation requirements "
  58                 "vary by ISP type.  Default is 1 - allocate memory.");
  59
  60 int ql2xextended_error_logging;
  61 module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
  62 MODULE_PARM_DESC(ql2xextended_error_logging,
  63                 "Option to enable extended error logging, "
  64                 "Default is 0 - no logging. 1 - log errors.");
  65
  66 static void qla2x00_free_device(scsi_qla_host_t *);
  67
  68 int ql2xfdmienable=1;
  69 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
  70 MODULE_PARM_DESC(ql2xfdmienable,
  71                 "Enables FDMI registratons "
  72                 "Default is 0 - no FDMI. 1 - perfom FDMI.");
  73
  74 #define MAX_Q_DEPTH    32
  75 static int ql2xmaxqdepth = MAX_Q_DEPTH;
  76 module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
  77 MODULE_PARM_DESC(ql2xmaxqdepth,
  78                 "Maximum queue depth to report for target devices.");
  79
  80 int ql2xqfulltracking = 1;
  81 module_param(ql2xqfulltracking, int, S_IRUGO|S_IWUSR);
  82 MODULE_PARM_DESC(ql2xqfulltracking,
  83                 "Controls whether the driver tracks queue full status "
  84                 "returns and dynamically adjusts a scsi device's queue "
  85                 "depth.  Default is 1, perform tracking.  Set to 0 to "
  86                 "disable dynamic tracking and adjustment of queue depth.");
  87
  88 int ql2xqfullrampup = 120;
  89 module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
  90 MODULE_PARM_DESC(ql2xqfullrampup,
  91                 "Number of seconds to wait to begin to ramp-up the queue "
  92                 "depth for a device after a queue-full condition has been "
  93                 "detected.  Default is 120 seconds.");
  94
  95 int ql2xiidmaenable=1;
  96 module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR);
  97 MODULE_PARM_DESC(ql2xiidmaenable,
  98                 "Enables iIDMA settings "
  99                 "Default is 1 - perform iIDMA. 0 - no iIDMA.");
 100
 101 int ql2xmaxqueues = 1;
 102 module_param(ql2xmaxqueues, int, S_IRUGO|S_IRUSR);
 103 MODULE_PARM_DESC(ql2xmaxqueues,
 104                 "Enables MQ settings "
 105                 "Default is 1 for single queue. Set it to number \
 106                         of queues in MQ mode.");
 107
 108 int ql2xmultique_tag;
 109 module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR);
 110 MODULE_PARM_DESC(ql2xmultique_tag,
 111                 "Enables CPU affinity settings for the driver "
 112                 "Default is 0 for no affinity of request and response IO. "
 113                 "Set it to 1 to turn on the cpu affinity.");
 114
 115 int ql2xfwloadbin;
 116 module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR);
 117 MODULE_PARM_DESC(ql2xfwloadbin,
 118                 "Option to specify location from which to load ISP firmware:\n"
 119                 " 2 -- load firmware via the reject_firmware() (hotplug)\n"
 120                 "      interface.\n"
 121                 " 1 -- load firmware from flash.\n"
 122                 " 0 -- use default semantics.\n");
 123
 124 /*
 125  * SCSI host template entry points
 126  */
 127 static int qla2xxx_slave_configure(struct scsi_device * device);
 128 static int qla2xxx_slave_alloc(struct scsi_device *);
 129 static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
 130 static void qla2xxx_scan_start(struct Scsi_Host *);
 131 static void qla2xxx_slave_destroy(struct scsi_device *);
 132 static int qla2xxx_queuecommand(struct scsi_cmnd *cmd,
 133                 void (*fn)(struct scsi_cmnd *));
 134 static int qla2xxx_eh_abort(struct scsi_cmnd *);
 135 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
 136 static int qla2xxx_eh_target_reset(struct scsi_cmnd *);
 137 static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
 138 static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
 139
 140 static int qla2x00_change_queue_depth(struct scsi_device *, int);
 141 static int qla2x00_change_queue_type(struct scsi_device *, int);
 142
 143 struct scsi_host_template qla2xxx_driver_template = {
 144         .module                 = THIS_MODULE,
 145         .name                   = QLA2XXX_DRIVER_NAME,
 146         .queuecommand           = qla2xxx_queuecommand,
 147
 148         .eh_abort_handler       = qla2xxx_eh_abort,
 149         .eh_device_reset_handler = qla2xxx_eh_device_reset,
 150         .eh_target_reset_handler = qla2xxx_eh_target_reset,
 151         .eh_bus_reset_handler   = qla2xxx_eh_bus_reset,
 152         .eh_host_reset_handler  = qla2xxx_eh_host_reset,
 153
 154         .slave_configure        = qla2xxx_slave_configure,
 155
 156         .slave_alloc            = qla2xxx_slave_alloc,
 157         .slave_destroy          = qla2xxx_slave_destroy,
 158         .scan_finished          = qla2xxx_scan_finished,
 159         .scan_start             = qla2xxx_scan_start,
 160         .change_queue_depth     = qla2x00_change_queue_depth,
 161         .change_queue_type      = qla2x00_change_queue_type,
 162         .this_id                = -1,
 163         .cmd_per_lun            = 3,
 164         .use_clustering         = ENABLE_CLUSTERING,
 165         .sg_tablesize           = SG_ALL,
 166
 167         .max_sectors            = 0xFFFF,
 168         .shost_attrs            = qla2x00_host_attrs,
 169 };
 170
 171 static struct scsi_transport_template *qla2xxx_transport_template = NULL;
 172 struct scsi_transport_template *qla2xxx_transport_vport_template = NULL;
 173
 174 /* TODO Convert to inlines
 175  *
 176  * Timer routines
 177  */
 178
 179 __inline__ void
 180 qla2x00_start_timer(scsi_qla_host_t *vha, void *func, unsigned long interval)
 181 {
 182         init_timer(&vha->timer);
 183         vha->timer.expires = jiffies + interval * HZ;
 184         vha->timer.data = (unsigned long)vha;
 185         vha->timer.function = (void (*)(unsigned long))func;
 186         add_timer(&vha->timer);
 187         vha->timer_active = 1;
 188 }
 189
 190 static inline void
 191 qla2x00_restart_timer(scsi_qla_host_t *vha, unsigned long interval)
 192 {
 193         mod_timer(&vha->timer, jiffies + interval * HZ);
 194 }
 195
 196 static __inline__ void
 197 qla2x00_stop_timer(scsi_qla_host_t *vha)
 198 {
 199         del_timer_sync(&vha->timer);
 200         vha->timer_active = 0;
 201 }
 202
 203 static int qla2x00_do_dpc(void *data);
 204
 205 static void qla2x00_rst_aen(scsi_qla_host_t *);
 206
 207 static int qla2x00_mem_alloc(struct qla_hw_data *, uint16_t, uint16_t,
 208         struct req_que **, struct rsp_que **);
 209 static void qla2x00_mem_free(struct qla_hw_data *);
 210 static void qla2x00_sp_free_dma(srb_t *);
 211
 212 /* -------------------------------------------------------------------------- */
 213 static int qla2x00_alloc_queues(struct qla_hw_data *ha)
 214 {
 215         ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_req_queues,
 216                                 GFP_KERNEL);
 217         if (!ha->req_q_map) {
 218                 qla_printk(KERN_WARNING, ha,
 219                         "Unable to allocate memory for request queue ptrs\n");
 220                 goto fail_req_map;
 221         }
 222
 223         ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_rsp_queues,
 224                                 GFP_KERNEL);
 225         if (!ha->rsp_q_map) {
 226                 qla_printk(KERN_WARNING, ha,
 227                         "Unable to allocate memory for response queue ptrs\n");
 228                 goto fail_rsp_map;
 229         }
 230         set_bit(0, ha->rsp_qid_map);
 231         set_bit(0, ha->req_qid_map);
 232         return 1;
 233
 234 fail_rsp_map:
 235         kfree(ha->req_q_map);
 236         ha->req_q_map = NULL;
 237 fail_req_map:
 238         return -ENOMEM;
 239 }
 240
 241 static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req)
 242 {
 243         if (req && req->ring)
 244                 dma_free_coherent(&ha->pdev->dev,
 245                 (req->length + 1) * sizeof(request_t),
 246                 req->ring, req->dma);
 247
 248         kfree(req);
 249         req = NULL;
 250 }
 251
 252 static void qla2x00_free_rsp_que(struct qla_hw_data *ha, struct rsp_que *rsp)
 253 {
 254         if (rsp && rsp->ring)
 255                 dma_free_coherent(&ha->pdev->dev,
 256                 (rsp->length + 1) * sizeof(response_t),
 257                 rsp->ring, rsp->dma);
 258
 259         kfree(rsp);
 260         rsp = NULL;
 261 }
 262
 263 static void qla2x00_free_queues(struct qla_hw_data *ha)
 264 {
 265         struct req_que *req;
 266         struct rsp_que *rsp;
 267         int cnt;
 268
 269         for (cnt = 0; cnt < ha->max_req_queues; cnt++) {
 270                 req = ha->req_q_map[cnt];
 271                 qla2x00_free_req_que(ha, req);
 272         }
 273         kfree(ha->req_q_map);
 274         ha->req_q_map = NULL;
 275
 276         for (cnt = 0; cnt < ha->max_rsp_queues; cnt++) {
 277                 rsp = ha->rsp_q_map[cnt];
 278                 qla2x00_free_rsp_que(ha, rsp);
 279         }
 280         kfree(ha->rsp_q_map);
 281         ha->rsp_q_map = NULL;
 282 }
 283
 284 static int qla25xx_setup_mode(struct scsi_qla_host *vha)
 285 {
 286         uint16_t options = 0;
 287         int ques, req, ret;
 288         struct qla_hw_data *ha = vha->hw;
 289
 290         if (!(ha->fw_attributes & BIT_6)) {
 291                 qla_printk(KERN_INFO, ha,
 292                         "Firmware is not multi-queue capable\n");
 293                 goto fail;
 294         }
 295         if (ql2xmultique_tag) {
 296                 /* create a request queue for IO */
 297                 options |= BIT_7;
 298                 req = qla25xx_create_req_que(ha, options, 0, 0, -1,
 299                         QLA_DEFAULT_QUE_QOS);
 300                 if (!req) {
 301                         qla_printk(KERN_WARNING, ha,
 302                                 "Can't create request queue\n");
 303                         goto fail;
 304                 }
 305                 ha->wq = create_workqueue("qla2xxx_wq");
 306                 vha->req = ha->req_q_map[req];
 307                 options |= BIT_1;
 308                 for (ques = 1; ques < ha->max_rsp_queues; ques++) {
 309                         ret = qla25xx_create_rsp_que(ha, options, 0, 0, req);
 310                         if (!ret) {
 311                                 qla_printk(KERN_WARNING, ha,
 312                                         "Response Queue create failed\n");
 313                                 goto fail2;
 314                         }
 315                 }
 316                 ha->flags.cpu_affinity_enabled = 1;
 317
 318                 DEBUG2(qla_printk(KERN_INFO, ha,
 319                         "CPU affinity mode enabled, no. of response"
 320                         " queues:%d, no. of request queues:%d\n",
 321                         ha->max_rsp_queues, ha->max_req_queues));
 322         }
 323         return 0;
 324 fail2:
 325         qla25xx_delete_queues(vha);
 326         destroy_workqueue(ha->wq);
 327         ha->wq = NULL;
 328 fail:
 329         ha->mqenable = 0;
 330         kfree(ha->req_q_map);
 331         kfree(ha->rsp_q_map);
 332         ha->max_req_queues = ha->max_rsp_queues = 1;
 333         return 1;
 334 }
 335
 336 static char *
 337 qla2x00_pci_info_str(struct scsi_qla_host *vha, char *str)
 338 {
 339         struct qla_hw_data *ha = vha->hw;
 340         static char *pci_bus_modes[] = {
 341                 "33", "66", "100", "133",
 342         };
 343         uint16_t pci_bus;
 344
 345         strcpy(str, "PCI");
 346         pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
 347         if (pci_bus) {
 348                 strcat(str, "-X (");
 349                 strcat(str, pci_bus_modes[pci_bus]);
 350         } else {
 351                 pci_bus = (ha->pci_attr & BIT_8) >> 8;
 352                 strcat(str, " (");
 353                 strcat(str, pci_bus_modes[pci_bus]);
 354         }
 355         strcat(str, " MHz)");
 356
 357         return (str);
 358 }
 359
 360 static char *
 361 qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str)
 362 {
 363         static char *pci_bus_modes[] = { "33", "66", "100", "133", };
 364         struct qla_hw_data *ha = vha->hw;
 365         uint32_t pci_bus;
 366         int pcie_reg;
 367
 368         pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
 369         if (pcie_reg) {
 370                 char lwstr[6];
 371                 uint16_t pcie_lstat, lspeed, lwidth;
 372
 373                 pcie_reg += 0x12;
 374                 pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
 375                 lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
 376                 lwidth = (pcie_lstat &
 377                     (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
 378
 379                 strcpy(str, "PCIe (");
 380                 if (lspeed == 1)
 381                         strcat(str, "2.5GT/s ");
 382                 else if (lspeed == 2)
 383                         strcat(str, "5.0GT/s ");
 384                 else
 385                         strcat(str, "<unknown> ");
 386                 snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
 387                 strcat(str, lwstr);
 388
 389                 return str;
 390         }
 391
 392         strcpy(str, "PCI");
 393         pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
 394         if (pci_bus == 0 || pci_bus == 8) {
 395                 strcat(str, " (");
 396                 strcat(str, pci_bus_modes[pci_bus >> 3]);
 397         } else {
 398                 strcat(str, "-X ");
 399                 if (pci_bus & BIT_2)
 400                         strcat(str, "Mode 2");
 401                 else
 402                         strcat(str, "Mode 1");
 403                 strcat(str, " (");
 404                 strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
 405         }
 406         strcat(str, " MHz)");
 407
 408         return str;
 409 }
 410
 411 static char *
 412 qla2x00_fw_version_str(struct scsi_qla_host *vha, char *str)
 413 {
 414         char un_str[10];
 415         struct qla_hw_data *ha = vha->hw;
 416
 417         sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
 418             ha->fw_minor_version,
 419             ha->fw_subminor_version);
 420
 421         if (ha->fw_attributes & BIT_9) {
 422                 strcat(str, "FLX");
 423                 return (str);
 424         }
 425
 426         switch (ha->fw_attributes & 0xFF) {
 427         case 0x7:
 428                 strcat(str, "EF");
 429                 break;
 430         case 0x17:
 431                 strcat(str, "TP");
 432                 break;
 433         case 0x37:
 434                 strcat(str, "IP");
 435                 break;
 436         case 0x77:
 437                 strcat(str, "VI");
 438                 break;
 439         default:
 440                 sprintf(un_str, "(%x)", ha->fw_attributes);
 441                 strcat(str, un_str);
 442                 break;
 443         }
 444         if (ha->fw_attributes & 0x100)
 445                 strcat(str, "X");
 446
 447         return (str);
 448 }
 449
 450 static char *
 451 qla24xx_fw_version_str(struct scsi_qla_host *vha, char *str)
 452 {
 453         struct qla_hw_data *ha = vha->hw;
 454
 455         sprintf(str, "%d.%02d.%02d (%x)", ha->fw_major_version,
 456             ha->fw_minor_version, ha->fw_subminor_version, ha->fw_attributes);
 457         return str;
 458 }
 459
 460 static inline srb_t *
 461 qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport,
 462     struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 463 {
 464         srb_t *sp;
 465         struct qla_hw_data *ha = vha->hw;
 466
 467         sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
 468         if (!sp)
 469                 return sp;
 470
 471         sp->fcport = fcport;
 472         sp->cmd = cmd;
 473         sp->flags = 0;
 474         CMD_SP(cmd) = (void *)sp;
 475         cmd->scsi_done = done;
 476         sp->ctx = NULL;
 477
 478         return sp;
 479 }
 480
 481 static int
 482 qla2xxx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 483 {
 484         scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 485         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 486         struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
 487         struct qla_hw_data *ha = vha->hw;
 488         struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
 489         srb_t *sp;
 490         int rval;
 491
 492         if (unlikely(pci_channel_offline(ha->pdev))) {
 493                 if (ha->pdev->error_state == pci_channel_io_frozen)
 494                         cmd->result = DID_REQUEUE << 16;
 495                 else
 496                         cmd->result = DID_NO_CONNECT << 16;
 497                 goto qc24_fail_command;
 498         }
 499
 500         rval = fc_remote_port_chkready(rport);
 501         if (rval) {
 502                 cmd->result = rval;
 503                 goto qc24_fail_command;
 504         }
 505
 506         /* Close window on fcport/rport state-transitioning. */
 507         if (fcport->drport)
 508                 goto qc24_target_busy;
 509
 510         if (atomic_read(&fcport->state) != FCS_ONLINE) {
 511                 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
 512                     atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
 513                         cmd->result = DID_NO_CONNECT << 16;
 514                         goto qc24_fail_command;
 515                 }
 516                 goto qc24_target_busy;
 517         }
 518
 519         spin_unlock_irq(vha->host->host_lock);
 520
 521         sp = qla2x00_get_new_sp(base_vha, fcport, cmd, done);
 522         if (!sp)
 523                 goto qc24_host_busy_lock;
 524
 525         rval = ha->isp_ops->start_scsi(sp);
 526         if (rval != QLA_SUCCESS)
 527                 goto qc24_host_busy_free_sp;
 528
 529         spin_lock_irq(vha->host->host_lock);
 530
 531         return 0;
 532
 533 qc24_host_busy_free_sp:
 534         qla2x00_sp_free_dma(sp);
 535         mempool_free(sp, ha->srb_mempool);
 536
 537 qc24_host_busy_lock:
 538         spin_lock_irq(vha->host->host_lock);
 539         return SCSI_MLQUEUE_HOST_BUSY;
 540
 541 qc24_target_busy:
 542         return SCSI_MLQUEUE_TARGET_BUSY;
 543
 544 qc24_fail_command:
 545         done(cmd);
 546
 547         return 0;
 548 }
 549
 550
 551 /*
 552  * qla2x00_eh_wait_on_command
 553  *    Waits for the command to be returned by the Firmware for some
 554  *    max time.
 555  *
 556  * Input:
 557  *    cmd = Scsi Command to wait on.
 558  *
 559  * Return:
 560  *    Not Found : 0
 561  *    Found : 1
 562  */
 563 static int
 564 qla2x00_eh_wait_on_command(struct scsi_cmnd *cmd)
 565 {
 566 #define ABORT_POLLING_PERIOD    1000
 567 #define ABORT_WAIT_ITER         ((10 * 1000) / (ABORT_POLLING_PERIOD))
 568         unsigned long wait_iter = ABORT_WAIT_ITER;
 569         int ret = QLA_SUCCESS;
 570
 571         while (CMD_SP(cmd) && wait_iter--) {
 572                 msleep(ABORT_POLLING_PERIOD);
 573         }
 574         if (CMD_SP(cmd))
 575                 ret = QLA_FUNCTION_FAILED;
 576
 577         return ret;
 578 }
 579
 580 /*
 581  * qla2x00_wait_for_hba_online
 582  *    Wait till the HBA is online after going through
 583  *    <= MAX_RETRIES_OF_ISP_ABORT  or
 584  *    finally HBA is disabled ie marked offline
 585  *
 586  * Input:
 587  *     ha - pointer to host adapter structure
 588  *
 589  * Note:
 590  *    Does context switching-Release SPIN_LOCK
 591  *    (if any) before calling this routine.
 592  *
 593  * Return:
 594  *    Success (Adapter is online) : 0
 595  *    Failed  (Adapter is offline/disabled) : 1
 596  */
 597 int
 598 qla2x00_wait_for_hba_online(scsi_qla_host_t *vha)
 599 {
 600         int             return_status;
 601         unsigned long   wait_online;
 602         struct qla_hw_data *ha = vha->hw;
 603         scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 604
 605         wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
 606         while (((test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) ||
 607             test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
 608             test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
 609             ha->dpc_active) && time_before(jiffies, wait_online)) {
 610
 611                 msleep(1000);
 612         }
 613         if (base_vha->flags.online)
 614                 return_status = QLA_SUCCESS;
 615         else
 616                 return_status = QLA_FUNCTION_FAILED;
 617
 618         return (return_status);
 619 }
 620
 621 int
 622 qla2x00_wait_for_chip_reset(scsi_qla_host_t *vha)
 623 {
 624         int             return_status;
 625         unsigned long   wait_reset;
 626         struct qla_hw_data *ha = vha->hw;
 627         scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 628
 629         wait_reset = jiffies + (MAX_LOOP_TIMEOUT * HZ);
 630         while (((test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) ||
 631             test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
 632             test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
 633             ha->dpc_active) && time_before(jiffies, wait_reset)) {
 634
 635                 msleep(1000);
 636
 637                 if (!test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
 638                     ha->flags.chip_reset_done)
 639                         break;
 640         }
 641         if (ha->flags.chip_reset_done)
 642                 return_status = QLA_SUCCESS;
 643         else
 644                 return_status = QLA_FUNCTION_FAILED;
 645
 646         return return_status;
 647 }
 648
 649 /*
 650  * qla2x00_wait_for_loop_ready
 651  *    Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
 652  *    to be in LOOP_READY state.
 653  * Input:
 654  *     ha - pointer to host adapter structure
 655  *
 656  * Note:
 657  *    Does context switching-Release SPIN_LOCK
 658  *    (if any) before calling this routine.
 659  *
 660  *
 661  * Return:
 662  *    Success (LOOP_READY) : 0
 663  *    Failed  (LOOP_NOT_READY) : 1
 664  */
 665 static inline int
 666 qla2x00_wait_for_loop_ready(scsi_qla_host_t *vha)
 667 {
 668         int      return_status = QLA_SUCCESS;
 669         unsigned long loop_timeout ;
 670         struct qla_hw_data *ha = vha->hw;
 671         scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 672
 673         /* wait for 5 min at the max for loop to be ready */
 674         loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
 675
 676         while ((!atomic_read(&base_vha->loop_down_timer) &&
 677             atomic_read(&base_vha->loop_state) == LOOP_DOWN) ||
 678             atomic_read(&base_vha->loop_state) != LOOP_READY) {
 679                 if (atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
 680                         return_status = QLA_FUNCTION_FAILED;
 681                         break;
 682                 }
 683                 msleep(1000);
 684                 if (time_after_eq(jiffies, loop_timeout)) {
 685                         return_status = QLA_FUNCTION_FAILED;
 686                         break;
 687                 }
 688         }
 689         return (return_status);
 690 }
 691
 692 void
 693 qla2x00_abort_fcport_cmds(fc_port_t *fcport)
 694 {
 695         int cnt;
 696         unsigned long flags;
 697         srb_t *sp;
 698         scsi_qla_host_t *vha = fcport->vha;
 699         struct qla_hw_data *ha = vha->hw;
 700         struct req_que *req;
 701
 702         spin_lock_irqsave(&ha->hardware_lock, flags);
 703         req = vha->req;
 704         for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
 705                 sp = req->outstanding_cmds[cnt];
 706                 if (!sp)
 707                         continue;
 708                 if (sp->fcport != fcport)
 709                         continue;
 710                 if (sp->ctx)
 711                         continue;
 712
 713                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 714                 if (ha->isp_ops->abort_command(sp)) {
 715                         DEBUG2(qla_printk(KERN_WARNING, ha,
 716                         "Abort failed --  %lx\n",
 717                         sp->cmd->serial_number));
 718                 } else {
 719                         if (qla2x00_eh_wait_on_command(sp->cmd) !=
 720                                 QLA_SUCCESS)
 721                                 DEBUG2(qla_printk(KERN_WARNING, ha,
 722                                 "Abort failed while waiting --  %lx\n",
 723                                 sp->cmd->serial_number));
 724                 }
 725                 spin_lock_irqsave(&ha->hardware_lock, flags);
 726         }
 727         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 728 }
 729
 730 static void
 731 qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
 732 {
 733         struct Scsi_Host *shost = cmnd->device->host;
 734         struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
 735         unsigned long flags;
 736
 737         spin_lock_irqsave(shost->host_lock, flags);
 738         while (rport->port_state == FC_PORTSTATE_BLOCKED) {
 739                 spin_unlock_irqrestore(shost->host_lock, flags);
 740                 msleep(1000);
 741                 spin_lock_irqsave(shost->host_lock, flags);
 742         }
 743         spin_unlock_irqrestore(shost->host_lock, flags);
 744         return;
 745 }
 746
 747 /**************************************************************************
 748 * qla2xxx_eh_abort
 749 *
 750 * Description:
 751 *    The abort function will abort the specified command.
 752 *
 753 * Input:
 754 *    cmd = Linux SCSI command packet to be aborted.
 755 *
 756 * Returns:
 757 *    Either SUCCESS or FAILED.
 758 *
 759 * Note:
 760 *    Only return FAILED if command not returned by firmware.
 761 **************************************************************************/
 762 static int
 763 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 764 {
 765         scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 766         srb_t *sp;
 767         int ret, i;
 768         unsigned int id, lun;
 769         unsigned long serial;
 770         unsigned long flags;
 771         int wait = 0;
 772         struct qla_hw_data *ha = vha->hw;
 773         struct req_que *req = vha->req;
 774         srb_t *spt;
 775
 776         qla2x00_block_error_handler(cmd);
 777
 778         if (!CMD_SP(cmd))
 779                 return SUCCESS;
 780
 781         ret = SUCCESS;
 782
 783         id = cmd->device->id;
 784         lun = cmd->device->lun;
 785         serial = cmd->serial_number;
 786         spt = (srb_t *) CMD_SP(cmd);
 787         if (!spt)
 788                 return SUCCESS;
 789
 790         /* Check active list for command command. */
 791         spin_lock_irqsave(&ha->hardware_lock, flags);
 792         for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
 793                 sp = req->outstanding_cmds[i];
 794
 795                 if (sp == NULL)
 796                         continue;
 797                 if (sp->ctx)
 798                         continue;
 799                 if (sp->cmd != cmd)
 800                         continue;
 801
 802                 DEBUG2(printk("%s(%ld): aborting sp %p from RISC."
 803                 " pid=%ld.\n", __func__, vha->host_no, sp, serial));
 804
 805                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 806                 if (ha->isp_ops->abort_command(sp)) {
 807                         DEBUG2(printk("%s(%ld): abort_command "
 808                         "mbx failed.\n", __func__, vha->host_no));
 809                         ret = FAILED;
 810                 } else {
 811                         DEBUG3(printk("%s(%ld): abort_command "
 812                         "mbx success.\n", __func__, vha->host_no));
 813                         wait = 1;
 814                 }
 815                 spin_lock_irqsave(&ha->hardware_lock, flags);
 816                 break;
 817         }
 818         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 819
 820         /* Wait for the command to be returned. */
 821         if (wait) {
 822                 if (qla2x00_eh_wait_on_command(cmd) != QLA_SUCCESS) {
 823                         qla_printk(KERN_ERR, ha,
 824                             "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
 825                             "%x.\n", vha->host_no, id, lun, serial, ret);
 826                         ret = FAILED;
 827                 }
 828         }
 829
 830         qla_printk(KERN_INFO, ha,
 831             "scsi(%ld:%d:%d): Abort command issued -- %d %lx %x.\n",
 832             vha->host_no, id, lun, wait, serial, ret);
 833
 834         return ret;
 835 }
 836
 837 enum nexus_wait_type {
 838         WAIT_HOST = 0,
 839         WAIT_TARGET,
 840         WAIT_LUN,
 841 };
 842
 843 static int
 844 qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t,
 845         unsigned int l, srb_t *sp, enum nexus_wait_type type)
 846 {
 847         int cnt, match, status;
 848         unsigned long flags;
 849         struct qla_hw_data *ha = vha->hw;
 850         struct req_que *req;
 851
 852         status = QLA_SUCCESS;
 853         if (!sp)
 854                 return status;
 855
 856         spin_lock_irqsave(&ha->hardware_lock, flags);
 857         req = vha->req;
 858         for (cnt = 1; status == QLA_SUCCESS &&
 859                 cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
 860                 sp = req->outstanding_cmds[cnt];
 861                 if (!sp)
 862                         continue;
 863                 if (sp->ctx)
 864                         continue;
 865                 if (vha->vp_idx != sp->fcport->vha->vp_idx)
 866                         continue;
 867                 match = 0;
 868                 switch (type) {
 869                 case WAIT_HOST:
 870                         match = 1;
 871                         break;
 872                 case WAIT_TARGET:
 873                         match = sp->cmd->device->id == t;
 874                         break;
 875                 case WAIT_LUN:
 876                         match = (sp->cmd->device->id == t &&
 877                                 sp->cmd->device->lun == l);
 878                         break;
 879                 }
 880                 if (!match)
 881                         continue;
 882
 883                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 884                 status = qla2x00_eh_wait_on_command(sp->cmd);
 885                 spin_lock_irqsave(&ha->hardware_lock, flags);
 886         }
 887         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 888
 889         return status;
 890 }
 891
 892 static char *reset_errors[] = {
 893         "HBA not online",
 894         "HBA not ready",
 895         "Task management failed",
 896         "Waiting for command completions",
 897 };
 898
 899 static int
 900 __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
 901     struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int, int))
 902 {
 903         scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 904         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 905         int err;
 906
 907         qla2x00_block_error_handler(cmd);
 908
 909         if (!fcport)
 910                 return FAILED;
 911
 912         qla_printk(KERN_INFO, vha->hw, "scsi(%ld:%d:%d): %s RESET ISSUED.\n",
 913             vha->host_no, cmd->device->id, cmd->device->lun, name);
 914
 915         err = 0;
 916         if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS)
 917                 goto eh_reset_failed;
 918         err = 1;
 919         if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS)
 920                 goto eh_reset_failed;
 921         err = 2;
 922         if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1)
 923                 != QLA_SUCCESS)
 924                 goto eh_reset_failed;
 925         err = 3;
 926         if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
 927             cmd->device->lun, (srb_t *) CMD_SP(cmd), type) != QLA_SUCCESS)
 928                 goto eh_reset_failed;
 929
 930         qla_printk(KERN_INFO, vha->hw, "scsi(%ld:%d:%d): %s RESET SUCCEEDED.\n",
 931             vha->host_no, cmd->device->id, cmd->device->lun, name);
 932
 933         return SUCCESS;
 934
 935  eh_reset_failed:
 936         qla_printk(KERN_INFO, vha->hw, "scsi(%ld:%d:%d): %s RESET FAILED: %s.\n"
 937             , vha->host_no, cmd->device->id, cmd->device->lun, name,
 938             reset_errors[err]);
 939         return FAILED;
 940 }
 941
 942 static int
 943 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 944 {
 945         scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 946         struct qla_hw_data *ha = vha->hw;
 947
 948         return __qla2xxx_eh_generic_reset("DEVICE", WAIT_LUN, cmd,
 949             ha->isp_ops->lun_reset);
 950 }
 951
 952 static int
 953 qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
 954 {
 955         scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 956         struct qla_hw_data *ha = vha->hw;
 957
 958         return __qla2xxx_eh_generic_reset("TARGET", WAIT_TARGET, cmd,
 959             ha->isp_ops->target_reset);
 960 }
 961
 962 /**************************************************************************
 963 * qla2xxx_eh_bus_reset
 964 *
 965 * Description:
 966 *    The bus reset function will reset the bus and abort any executing
 967 *    commands.
 968 *
 969 * Input:
 970 *    cmd = Linux SCSI command packet of the command that cause the
 971 *          bus reset.
 972 *
 973 * Returns:
 974 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 975 *
 976 **************************************************************************/
 977 static int
 978 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 979 {
 980         scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 981         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 982         int ret = FAILED;
 983         unsigned int id, lun;
 984         unsigned long serial;
 985         srb_t *sp = (srb_t *) CMD_SP(cmd);
 986
 987         qla2x00_block_error_handler(cmd);
 988
 989         id = cmd->device->id;
 990         lun = cmd->device->lun;
 991         serial = cmd->serial_number;
 992
 993         if (!fcport)
 994                 return ret;
 995
 996         qla_printk(KERN_INFO, vha->hw,
 997             "scsi(%ld:%d:%d): BUS RESET ISSUED.\n", vha->host_no, id, lun);
 998
 999         if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
1000                 DEBUG2(printk("%s failed:board disabled\n",__func__));
1001                 goto eh_bus_reset_done;
1002         }
1003
1004         if (qla2x00_wait_for_loop_ready(vha) == QLA_SUCCESS) {
1005                 if (qla2x00_loop_reset(vha) == QLA_SUCCESS)
1006                         ret = SUCCESS;
1007         }
1008         if (ret == FAILED)
1009                 goto eh_bus_reset_done;
1010
1011         /* Flush outstanding commands. */
1012         if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, sp, WAIT_HOST) !=
1013             QLA_SUCCESS)
1014                 ret = FAILED;
1015
1016 eh_bus_reset_done:
1017         qla_printk(KERN_INFO, vha->hw, "%s: reset %s\n", __func__,
1018             (ret == FAILED) ? "failed" : "succeded");
1019
1020         return ret;
1021 }
1022
1023 /**************************************************************************
1024 * qla2xxx_eh_host_reset
1025 *
1026 * Description:
1027 *    The reset function will reset the Adapter.
1028 *
1029 * Input:
1030 *      cmd = Linux SCSI command packet of the command that cause the
1031 *            adapter reset.
1032 *
1033 * Returns:
1034 *      Either SUCCESS or FAILED.
1035 *
1036 * Note:
1037 **************************************************************************/
1038 static int
1039 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
1040 {
1041         scsi_qla_host_t *vha = shost_priv(cmd->device->host);
1042         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
1043         struct qla_hw_data *ha = vha->hw;
1044         int ret = FAILED;
1045         unsigned int id, lun;
1046         unsigned long serial;
1047         srb_t *sp = (srb_t *) CMD_SP(cmd);
1048         scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
1049
1050         qla2x00_block_error_handler(cmd);
1051
1052         id = cmd->device->id;
1053         lun = cmd->device->lun;
1054         serial = cmd->serial_number;
1055
1056         if (!fcport)
1057                 return ret;
1058
1059         qla_printk(KERN_INFO, ha,
1060             "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", vha->host_no, id, lun);
1061
1062         if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS)
1063                 goto eh_host_reset_lock;
1064
1065         /*
1066          * Fixme-may be dpc thread is active and processing
1067          * loop_resync,so wait a while for it to
1068          * be completed and then issue big hammer.Otherwise
1069          * it may cause I/O failure as big hammer marks the
1070          * devices as lost kicking of the port_down_timer
1071          * while dpc is stuck for the mailbox to complete.
1072          */
1073         qla2x00_wait_for_loop_ready(vha);
1074         if (vha != base_vha) {
1075                 if (qla2x00_vp_abort_isp(vha))
1076                         goto eh_host_reset_lock;
1077         } else {
1078                 if (ha->wq)
1079                         flush_workqueue(ha->wq);
1080
1081                 set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
1082                 if (qla2x00_abort_isp(base_vha)) {
1083                         clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
1084                         /* failed. schedule dpc to try */
1085                         set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
1086
1087                         if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS)
1088                                 goto eh_host_reset_lock;
1089                 }
1090                 clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
1091         }
1092
1093         /* Waiting for command to be returned to OS.*/
1094         if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, sp, WAIT_HOST) ==
1095                 QLA_SUCCESS)
1096                 ret = SUCCESS;
1097
1098 eh_host_reset_lock:
1099         qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
1100             (ret == FAILED) ? "failed" : "succeded");
1101
1102         return ret;
1103 }
1104
1105 /*
1106 * qla2x00_loop_reset
1107 *      Issue loop reset.
1108 *
1109 * Input:
1110 *      ha = adapter block pointer.
1111 *
1112 * Returns:
1113 *      0 = success
1114 */
1115 int
1116 qla2x00_loop_reset(scsi_qla_host_t *vha)
1117 {
1118         int ret;
1119         struct fc_port *fcport;
1120         struct qla_hw_data *ha = vha->hw;
1121
1122         if (ha->flags.enable_lip_full_login && !IS_QLA81XX(ha)) {
1123                 ret = qla2x00_full_login_lip(vha);
1124                 if (ret != QLA_SUCCESS) {
1125                         DEBUG2_3(printk("%s(%ld): failed: "
1126                             "full_login_lip=%d.\n", __func__, vha->host_no,
1127                             ret));
1128                 }
1129                 atomic_set(&vha->loop_state, LOOP_DOWN);
1130                 atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
1131                 qla2x00_mark_all_devices_lost(vha, 0);
1132                 qla2x00_wait_for_loop_ready(vha);
1133         }
1134
1135         if (ha->flags.enable_lip_reset) {
1136                 ret = qla2x00_lip_reset(vha);
1137                 if (ret != QLA_SUCCESS) {
1138                         DEBUG2_3(printk("%s(%ld): failed: "
1139                             "lip_reset=%d.\n", __func__, vha->host_no, ret));
1140                 } else
1141                         qla2x00_wait_for_loop_ready(vha);
1142         }
1143
1144         if (ha->flags.enable_target_reset) {
1145                 list_for_each_entry(fcport, &vha->vp_fcports, list) {
1146                         if (fcport->port_type != FCT_TARGET)
1147                                 continue;
1148
1149                         ret = ha->isp_ops->target_reset(fcport, 0, 0);
1150                         if (ret != QLA_SUCCESS) {
1151                                 DEBUG2_3(printk("%s(%ld): bus_reset failed: "
1152                                     "target_reset=%d d_id=%x.\n", __func__,
1153                                     vha->host_no, ret, fcport->d_id.b24));
1154                         }
1155                 }
1156         }
1157         /* Issue marker command only when we are going to start the I/O */
1158         vha->marker_needed = 1;
1159
1160         return QLA_SUCCESS;
1161 }
1162
1163 void
1164 qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
1165 {
1166         int que, cnt;
1167         unsigned long flags;
1168         srb_t *sp;
1169         struct srb_ctx *ctx;
1170         struct qla_hw_data *ha = vha->hw;
1171         struct req_que *req;
1172
1173         spin_lock_irqsave(&ha->hardware_lock, flags);
1174         for (que = 0; que < ha->max_req_queues; que++) {
1175                 req = ha->req_q_map[que];
1176                 if (!req)
1177                         continue;
1178                 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
1179                         sp = req->outstanding_cmds[cnt];
1180                         if (sp) {
1181                                 req->outstanding_cmds[cnt] = NULL;
1182                                 if (!sp->ctx) {
1183                                         sp->cmd->result = res;
1184                                         qla2x00_sp_compl(ha, sp);
1185                                 } else {
1186                                         ctx = sp->ctx;
1187                                         del_timer_sync(&ctx->timer);
1188                                         ctx->free(sp);
1189                                 }
1190                         }
1191                 }
1192         }
1193         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1194 }
1195
1196 static int
1197 qla2xxx_slave_alloc(struct scsi_device *sdev)
1198 {
1199         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
1200
1201         if (!rport || fc_remote_port_chkready(rport))
1202                 return -ENXIO;
1203
1204         sdev->hostdata = *(fc_port_t **)rport->dd_data;
1205
1206         return 0;
1207 }
1208
1209 static int
1210 qla2xxx_slave_configure(struct scsi_device *sdev)
1211 {
1212         scsi_qla_host_t *vha = shost_priv(sdev->host);
1213         struct qla_hw_data *ha = vha->hw;
1214         struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
1215         fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
1216         struct req_que *req = vha->req;
1217
1218         if (sdev->tagged_supported)
1219                 scsi_activate_tcq(sdev, req->max_q_depth);
1220         else
1221                 scsi_deactivate_tcq(sdev, req->max_q_depth);
1222
1223         rport->dev_loss_tmo = ha->port_down_retry_count;
1224         if (sdev->type == TYPE_TAPE)
1225                 fcport->flags |= FCF_TAPE_PRESENT;
1226
1227         return 0;
1228 }
1229
1230 static void
1231 qla2xxx_slave_destroy(struct scsi_device *sdev)
1232 {
1233         sdev->hostdata = NULL;
1234 }
1235
1236 static int
1237 qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
1238 {
1239         scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
1240         return sdev->queue_depth;
1241 }
1242
1243 static int
1244 qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
1245 {
1246         if (sdev->tagged_supported) {
1247                 scsi_set_tag_type(sdev, tag_type);
1248                 if (tag_type)
1249                         scsi_activate_tcq(sdev, sdev->queue_depth);
1250                 else
1251                         scsi_deactivate_tcq(sdev, sdev->queue_depth);
1252         } else
1253                 tag_type = 0;
1254
1255         return tag_type;
1256 }
1257
1258 /**
1259  * qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
1260  * @ha: HA context
1261  *
1262  * At exit, the @ha's flags.enable_64bit_addressing set to indicated
1263  * supported addressing method.
1264  */
1265 static void
1266 qla2x00_config_dma_addressing(struct qla_hw_data *ha)
1267 {
1268         /* Assume a 32bit DMA mask. */
1269         ha->flags.enable_64bit_addressing = 0;
1270
1271         if (!dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(64))) {
1272                 /* Any upper-dword bits set? */
1273                 if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
1274                     !pci_set_consistent_dma_mask(ha->pdev, DMA_BIT_MASK(64))) {
1275                         /* Ok, a 64bit DMA mask is applicable. */
1276                         ha->flags.enable_64bit_addressing = 1;
1277                         ha->isp_ops->calc_req_entries = qla2x00_calc_iocbs_64;
1278                         ha->isp_ops->build_iocbs = qla2x00_build_scsi_iocbs_64;
1279                         return;
1280                 }
1281         }
1282
1283         dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32));
1284         pci_set_consistent_dma_mask(ha->pdev, DMA_BIT_MASK(32));
1285 }
1286
1287 static void
1288 qla2x00_enable_intrs(struct qla_hw_data *ha)
1289 {
1290         unsigned long flags = 0;
1291         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1292
1293         spin_lock_irqsave(&ha->hardware_lock, flags);
1294         ha->interrupts_on = 1;
1295         /* enable risc and host interrupts */
1296         WRT_REG_WORD(&reg->ictrl, ICR_EN_INT | ICR_EN_RISC);
1297         RD_REG_WORD(&reg->ictrl);
1298         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1299
1300 }
1301
1302 static void
1303 qla2x00_disable_intrs(struct qla_hw_data *ha)
1304 {
1305         unsigned long flags = 0;
1306         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1307
1308         spin_lock_irqsave(&ha->hardware_lock, flags);
1309         ha->interrupts_on = 0;
1310         /* disable risc and host interrupts */
1311         WRT_REG_WORD(&reg->ictrl, 0);
1312         RD_REG_WORD(&reg->ictrl);
1313         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1314 }
1315
1316 static void
1317 qla24xx_enable_intrs(struct qla_hw_data *ha)
1318 {
1319         unsigned long flags = 0;
1320         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1321
1322         spin_lock_irqsave(&ha->hardware_lock, flags);
1323         ha->interrupts_on = 1;
1324         WRT_REG_DWORD(&reg->ictrl, ICRX_EN_RISC_INT);
1325         RD_REG_DWORD(&reg->ictrl);
1326         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1327 }
1328
1329 static void
1330 qla24xx_disable_intrs(struct qla_hw_data *ha)
1331 {
1332         unsigned long flags = 0;
1333         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1334
1335         if (IS_NOPOLLING_TYPE(ha))
1336                 return;
1337         spin_lock_irqsave(&ha->hardware_lock, flags);
1338         ha->interrupts_on = 0;
1339         WRT_REG_DWORD(&reg->ictrl, 0);
1340         RD_REG_DWORD(&reg->ictrl);
1341         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1342 }
1343
1344 static struct isp_operations qla2100_isp_ops = {
1345         .pci_config             = qla2100_pci_config,
1346         .reset_chip             = qla2x00_reset_chip,
1347         .chip_diag              = qla2x00_chip_diag,
1348         .config_rings           = qla2x00_config_rings,
1349         .reset_adapter          = qla2x00_reset_adapter,
1350         .nvram_config           = qla2x00_nvram_config,
1351         .update_fw_options      = qla2x00_update_fw_options,
1352         .load_risc              = qla2x00_load_risc,
1353         .pci_info_str           = qla2x00_pci_info_str,
1354         .fw_version_str         = qla2x00_fw_version_str,
1355         .intr_handler           = qla2100_intr_handler,
1356         .enable_intrs           = qla2x00_enable_intrs,
1357         .disable_intrs          = qla2x00_disable_intrs,
1358         .abort_command          = qla2x00_abort_command,
1359         .target_reset           = qla2x00_abort_target,
1360         .lun_reset              = qla2x00_lun_reset,
1361         .fabric_login           = qla2x00_login_fabric,
1362         .fabric_logout          = qla2x00_fabric_logout,
1363         .calc_req_entries       = qla2x00_calc_iocbs_32,
1364         .build_iocbs            = qla2x00_build_scsi_iocbs_32,
1365         .prep_ms_iocb           = qla2x00_prep_ms_iocb,
1366         .prep_ms_fdmi_iocb      = qla2x00_prep_ms_fdmi_iocb,
1367         .read_nvram             = qla2x00_read_nvram_data,
1368         .write_nvram            = qla2x00_write_nvram_data,
1369         .fw_dump                = qla2100_fw_dump,
1370         .beacon_on              = NULL,
1371         .beacon_off             = NULL,
1372         .beacon_blink           = NULL,
1373         .read_optrom            = qla2x00_read_optrom_data,
1374         .write_optrom           = qla2x00_write_optrom_data,
1375         .get_flash_version      = qla2x00_get_flash_version,
1376         .start_scsi             = qla2x00_start_scsi,
1377 };
1378
1379 static struct isp_operations qla2300_isp_ops = {
1380         .pci_config             = qla2300_pci_config,
1381         .reset_chip             = qla2x00_reset_chip,
1382         .chip_diag              = qla2x00_chip_diag,
1383         .config_rings           = qla2x00_config_rings,
1384         .reset_adapter          = qla2x00_reset_adapter,
1385         .nvram_config           = qla2x00_nvram_config,
1386         .update_fw_options      = qla2x00_update_fw_options,
1387         .load_risc              = qla2x00_load_risc,
1388         .pci_info_str           = qla2x00_pci_info_str,
1389         .fw_version_str         = qla2x00_fw_version_str,
1390         .intr_handler           = qla2300_intr_handler,
1391         .enable_intrs           = qla2x00_enable_intrs,
1392         .disable_intrs          = qla2x00_disable_intrs,
1393         .abort_command          = qla2x00_abort_command,
1394         .target_reset           = qla2x00_abort_target,
1395         .lun_reset              = qla2x00_lun_reset,
1396         .fabric_login           = qla2x00_login_fabric,
1397         .fabric_logout          = qla2x00_fabric_logout,
1398         .calc_req_entries       = qla2x00_calc_iocbs_32,
1399         .build_iocbs            = qla2x00_build_scsi_iocbs_32,
1400         .prep_ms_iocb           = qla2x00_prep_ms_iocb,
1401         .prep_ms_fdmi_iocb      = qla2x00_prep_ms_fdmi_iocb,
1402         .read_nvram             = qla2x00_read_nvram_data,
1403         .write_nvram            = qla2x00_write_nvram_data,
1404         .fw_dump                = qla2300_fw_dump,
1405         .beacon_on              = qla2x00_beacon_on,
1406         .beacon_off             = qla2x00_beacon_off,
1407         .beacon_blink           = qla2x00_beacon_blink,
1408         .read_optrom            = qla2x00_read_optrom_data,
1409         .write_optrom           = qla2x00_write_optrom_data,
1410         .get_flash_version      = qla2x00_get_flash_version,
1411         .start_scsi             = qla2x00_start_scsi,
1412 };
1413
1414 static struct isp_operations qla24xx_isp_ops = {
1415         .pci_config             = qla24xx_pci_config,
1416         .reset_chip             = qla24xx_reset_chip,
1417         .chip_diag              = qla24xx_chip_diag,
1418         .config_rings           = qla24xx_config_rings,
1419         .reset_adapter          = qla24xx_reset_adapter,
1420         .nvram_config           = qla24xx_nvram_config,
1421         .update_fw_options      = qla24xx_update_fw_options,
1422         .load_risc              = qla24xx_load_risc,
1423         .pci_info_str           = qla24xx_pci_info_str,
1424         .fw_version_str         = qla24xx_fw_version_str,
1425         .intr_handler           = qla24xx_intr_handler,
1426         .enable_intrs           = qla24xx_enable_intrs,
1427         .disable_intrs          = qla24xx_disable_intrs,
1428         .abort_command          = qla24xx_abort_command,
1429         .target_reset           = qla24xx_abort_target,
1430         .lun_reset              = qla24xx_lun_reset,
1431         .fabric_login           = qla24xx_login_fabric,
1432         .fabric_logout          = qla24xx_fabric_logout,
1433         .calc_req_entries       = NULL,
1434         .build_iocbs            = NULL,
1435         .prep_ms_iocb           = qla24xx_prep_ms_iocb,
1436         .prep_ms_fdmi_iocb      = qla24xx_prep_ms_fdmi_iocb,
1437         .read_nvram             = qla24xx_read_nvram_data,
1438         .write_nvram            = qla24xx_write_nvram_data,
1439         .fw_dump                = qla24xx_fw_dump,
1440         .beacon_on              = qla24xx_beacon_on,
1441         .beacon_off             = qla24xx_beacon_off,
1442         .beacon_blink           = qla24xx_beacon_blink,
1443         .read_optrom            = qla24xx_read_optrom_data,
1444         .write_optrom           = qla24xx_write_optrom_data,
1445         .get_flash_version      = qla24xx_get_flash_version,
1446         .start_scsi             = qla24xx_start_scsi,
1447 };
1448
1449 static struct isp_operations qla25xx_isp_ops = {
1450         .pci_config             = qla25xx_pci_config,
1451         .reset_chip             = qla24xx_reset_chip,
1452         .chip_diag              = qla24xx_chip_diag,
1453         .config_rings           = qla24xx_config_rings,
1454         .reset_adapter          = qla24xx_reset_adapter,
1455         .nvram_config           = qla24xx_nvram_config,
1456         .update_fw_options      = qla24xx_update_fw_options,
1457         .load_risc              = qla24xx_load_risc,
1458         .pci_info_str           = qla24xx_pci_info_str,
1459         .fw_version_str         = qla24xx_fw_version_str,
1460         .intr_handler           = qla24xx_intr_handler,
1461         .enable_intrs           = qla24xx_enable_intrs,
1462         .disable_intrs          = qla24xx_disable_intrs,
1463         .abort_command          = qla24xx_abort_command,
1464         .target_reset           = qla24xx_abort_target,
1465         .lun_reset              = qla24xx_lun_reset,
1466         .fabric_login           = qla24xx_login_fabric,
1467         .fabric_logout          = qla24xx_fabric_logout,
1468         .calc_req_entries       = NULL,
1469         .build_iocbs            = NULL,
1470         .prep_ms_iocb           = qla24xx_prep_ms_iocb,
1471         .prep_ms_fdmi_iocb      = qla24xx_prep_ms_fdmi_iocb,
1472         .read_nvram             = qla25xx_read_nvram_data,
1473         .write_nvram            = qla25xx_write_nvram_data,
1474         .fw_dump                = qla25xx_fw_dump,
1475         .beacon_on              = qla24xx_beacon_on,
1476         .beacon_off             = qla24xx_beacon_off,
1477         .beacon_blink           = qla24xx_beacon_blink,
1478         .read_optrom            = qla25xx_read_optrom_data,
1479         .write_optrom           = qla24xx_write_optrom_data,
1480         .get_flash_version      = qla24xx_get_flash_version,
1481         .start_scsi             = qla24xx_start_scsi,
1482 };
1483
1484 static struct isp_operations qla81xx_isp_ops = {
1485         .pci_config             = qla25xx_pci_config,
1486         .reset_chip             = qla24xx_reset_chip,
1487         .chip_diag              = qla24xx_chip_diag,
1488         .config_rings           = qla24xx_config_rings,
1489         .reset_adapter          = qla24xx_reset_adapter,
1490         .nvram_config           = qla81xx_nvram_config,
1491         .update_fw_options      = qla81xx_update_fw_options,
1492         .load_risc              = qla81xx_load_risc,
1493         .pci_info_str           = qla24xx_pci_info_str,
1494         .fw_version_str         = qla24xx_fw_version_str,
1495         .intr_handler           = qla24xx_intr_handler,
1496         .enable_intrs           = qla24xx_enable_intrs,
1497         .disable_intrs          = qla24xx_disable_intrs,
1498         .abort_command          = qla24xx_abort_command,
1499         .target_reset           = qla24xx_abort_target,
1500         .lun_reset              = qla24xx_lun_reset,
1501         .fabric_login           = qla24xx_login_fabric,
1502         .fabric_logout          = qla24xx_fabric_logout,
1503         .calc_req_entries       = NULL,
1504         .build_iocbs            = NULL,
1505         .prep_ms_iocb           = qla24xx_prep_ms_iocb,
1506         .prep_ms_fdmi_iocb      = qla24xx_prep_ms_fdmi_iocb,
1507         .read_nvram             = NULL,
1508         .write_nvram            = NULL,
1509         .fw_dump                = qla81xx_fw_dump,
1510         .beacon_on              = qla24xx_beacon_on,
1511         .beacon_off             = qla24xx_beacon_off,
1512         .beacon_blink           = qla24xx_beacon_blink,
1513         .read_optrom            = qla25xx_read_optrom_data,
1514         .write_optrom           = qla24xx_write_optrom_data,
1515         .get_flash_version      = qla24xx_get_flash_version,
1516         .start_scsi             = qla24xx_start_scsi,
1517 };
1518
1519 static inline void
1520 qla2x00_set_isp_flags(struct qla_hw_data *ha)
1521 {
1522         ha->device_type = DT_EXTENDED_IDS;
1523         switch (ha->pdev->device) {
1524         case PCI_DEVICE_ID_QLOGIC_ISP2100:
1525                 ha->device_type |= DT_ISP2100;
1526                 ha->device_type &= ~DT_EXTENDED_IDS;
1527                 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1528                 break;
1529         case PCI_DEVICE_ID_QLOGIC_ISP2200:
1530                 ha->device_type |= DT_ISP2200;
1531                 ha->device_type &= ~DT_EXTENDED_IDS;
1532                 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1533                 break;
1534         case PCI_DEVICE_ID_QLOGIC_ISP2300:
1535                 ha->device_type |= DT_ISP2300;
1536                 ha->device_type |= DT_ZIO_SUPPORTED;
1537                 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1538                 break;
1539         case PCI_DEVICE_ID_QLOGIC_ISP2312:
1540                 ha->device_type |= DT_ISP2312;
1541                 ha->device_type |= DT_ZIO_SUPPORTED;
1542                 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1543                 break;
1544         case PCI_DEVICE_ID_QLOGIC_ISP2322:
1545                 ha->device_type |= DT_ISP2322;
1546                 ha->device_type |= DT_ZIO_SUPPORTED;
1547                 if (ha->pdev->subsystem_vendor == 0x1028 &&
1548                     ha->pdev->subsystem_device == 0x0170)
1549                         ha->device_type |= DT_OEM_001;
1550                 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1551                 break;
1552         case PCI_DEVICE_ID_QLOGIC_ISP6312:
1553                 ha->device_type |= DT_ISP6312;
1554                 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1555                 break;
1556         case PCI_DEVICE_ID_QLOGIC_ISP6322:
1557                 ha->device_type |= DT_ISP6322;
1558                 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1559                 break;
1560         case PCI_DEVICE_ID_QLOGIC_ISP2422:
1561                 ha->device_type |= DT_ISP2422;
1562                 ha->device_type |= DT_ZIO_SUPPORTED;
1563                 ha->device_type |= DT_FWI2;
1564                 ha->device_type |= DT_IIDMA;
1565                 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1566                 break;
1567         case PCI_DEVICE_ID_QLOGIC_ISP2432:
1568                 ha->device_type |= DT_ISP2432;
1569                 ha->device_type |= DT_ZIO_SUPPORTED;
1570                 ha->device_type |= DT_FWI2;
1571                 ha->device_type |= DT_IIDMA;
1572                 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1573                 break;
1574         case PCI_DEVICE_ID_QLOGIC_ISP8432:
1575                 ha->device_type |= DT_ISP8432;
1576                 ha->device_type |= DT_ZIO_SUPPORTED;
1577                 ha->device_type |= DT_FWI2;
1578                 ha->device_type |= DT_IIDMA;
1579                 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1580                 break;
1581         case PCI_DEVICE_ID_QLOGIC_ISP5422:
1582                 ha->device_type |= DT_ISP5422;
1583                 ha->device_type |= DT_FWI2;
1584                 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1585                 break;
1586         case PCI_DEVICE_ID_QLOGIC_ISP5432:
1587                 ha->device_type |= DT_ISP5432;
1588                 ha->device_type |= DT_FWI2;
1589                 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1590                 break;
1591         case PCI_DEVICE_ID_QLOGIC_ISP2532:
1592                 ha->device_type |= DT_ISP2532;
1593                 ha->device_type |= DT_ZIO_SUPPORTED;
1594                 ha->device_type |= DT_FWI2;
1595                 ha->device_type |= DT_IIDMA;
1596                 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1597                 break;
1598         case PCI_DEVICE_ID_QLOGIC_ISP8001:
1599                 ha->device_type |= DT_ISP8001;
1600                 ha->device_type |= DT_ZIO_SUPPORTED;
1601                 ha->device_type |= DT_FWI2;
1602                 ha->device_type |= DT_IIDMA;
1603                 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1604                 break;
1605         }
1606
1607         /* Get adapter physical port no from interrupt pin register. */
1608         pci_read_config_byte(ha->pdev, PCI_INTERRUPT_PIN, &ha->port_no);
1609         if (ha->port_no & 1)
1610                 ha->flags.port0 = 1;
1611         else
1612                 ha->flags.port0 = 0;
1613 }
1614
1615 static int
1616 qla2x00_iospace_config(struct qla_hw_data *ha)
1617 {
1618         resource_size_t pio;
1619         uint16_t msix;
1620         int cpus;
1621
1622         if (pci_request_selected_regions(ha->pdev, ha->bars,
1623             QLA2XXX_DRIVER_NAME)) {
1624                 qla_printk(KERN_WARNING, ha,
1625                     "Failed to reserve PIO/MMIO regions (%s)\n",
1626                     pci_name(ha->pdev));
1627
1628                 goto iospace_error_exit;
1629         }
1630         if (!(ha->bars & 1))
1631                 goto skip_pio;
1632
1633         /* We only need PIO for Flash operations on ISP2312 v2 chips. */
1634         pio = pci_resource_start(ha->pdev, 0);
1635         if (pci_resource_flags(ha->pdev, 0) & IORESOURCE_IO) {
1636                 if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) {
1637                         qla_printk(KERN_WARNING, ha,
1638                             "Invalid PCI I/O region size (%s)...\n",
1639                                 pci_name(ha->pdev));
1640                         pio = 0;
1641                 }
1642         } else {
1643                 qla_printk(KERN_WARNING, ha,
1644                     "region #0 not a PIO resource (%s)...\n",
1645                     pci_name(ha->pdev));
1646                 pio = 0;
1647         }
1648         ha->pio_address = pio;
1649
1650 skip_pio:
1651         /* Use MMIO operations for all accesses. */
1652         if (!(pci_resource_flags(ha->pdev, 1) & IORESOURCE_MEM)) {
1653                 qla_printk(KERN_ERR, ha,
1654                     "region #1 not an MMIO resource (%s), aborting\n",
1655                     pci_name(ha->pdev));
1656                 goto iospace_error_exit;
1657         }
1658         if (pci_resource_len(ha->pdev, 1) < MIN_IOBASE_LEN) {
1659                 qla_printk(KERN_ERR, ha,
1660                     "Invalid PCI mem region size (%s), aborting\n",
1661                         pci_name(ha->pdev));
1662                 goto iospace_error_exit;
1663         }
1664
1665         ha->iobase = ioremap(pci_resource_start(ha->pdev, 1), MIN_IOBASE_LEN);
1666         if (!ha->iobase) {
1667                 qla_printk(KERN_ERR, ha,
1668                     "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));
1669
1670                 goto iospace_error_exit;
1671         }
1672
1673         /* Determine queue resources */
1674         ha->max_req_queues = ha->max_rsp_queues = 1;
1675         if ((ql2xmaxqueues <= 1 || ql2xmultique_tag < 1) &&
1676                 (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
1677                 goto mqiobase_exit;
1678         ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
1679                         pci_resource_len(ha->pdev, 3));
1680         if (ha->mqiobase) {
1681                 /* Read MSIX vector size of the board */
1682                 pci_read_config_word(ha->pdev, QLA_PCI_MSIX_CONTROL, &msix);
1683                 ha->msix_count = msix;
1684                 /* Max queues are bounded by available msix vectors */
1685                 /* queue 0 uses two msix vectors */
1686                 if (ql2xmultique_tag) {
1687                         cpus = num_online_cpus();
1688                         ha->max_rsp_queues = (ha->msix_count - 1 > cpus) ?
1689                                 (cpus + 1) : (ha->msix_count - 1);
1690                         ha->max_req_queues = 2;
1691                 } else if (ql2xmaxqueues > 1) {
1692                         ha->max_req_queues = ql2xmaxqueues > QLA_MQ_SIZE ?
1693                                                 QLA_MQ_SIZE : ql2xmaxqueues;
1694                         DEBUG2(qla_printk(KERN_INFO, ha, "QoS mode set, max no"
1695                         " of request queues:%d\n", ha->max_req_queues));
1696                 }
1697                 qla_printk(KERN_INFO, ha,
1698                         "MSI-X vector count: %d\n", msix);
1699         } else
1700                 qla_printk(KERN_INFO, ha, "BAR 3 not enabled\n");
1701
1702 mqiobase_exit:
1703         ha->msix_count = ha->max_rsp_queues + 1;
1704         return (0);
1705
1706 iospace_error_exit:
1707         return (-ENOMEM);
1708 }
1709
1710 static void
1711 qla2xxx_scan_start(struct Scsi_Host *shost)
1712 {
1713         scsi_qla_host_t *vha = shost_priv(shost);
1714
1715         if (vha->hw->flags.running_gold_fw)
1716                 return;
1717
1718         set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
1719         set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
1720         set_bit(RSCN_UPDATE, &vha->dpc_flags);
1721         set_bit(NPIV_CONFIG_NEEDED, &vha->dpc_flags);
1722 }
1723
1724 static int
1725 qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
1726 {
1727         scsi_qla_host_t *vha = shost_priv(shost);
1728
1729         if (!vha->host)
1730                 return 1;
1731         if (time > vha->hw->loop_reset_delay * HZ)
1732                 return 1;
1733
1734         return atomic_read(&vha->loop_state) == LOOP_READY;
1735 }
1736
1737 /*
1738  * PCI driver interface
1739  */
1740 static int __devinit
1741 qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
1742 {
1743         int     ret = -ENODEV;
1744         struct Scsi_Host *host;
1745         scsi_qla_host_t *base_vha = NULL;
1746         struct qla_hw_data *ha;
1747         char pci_info[30];
1748         char fw_str[30];
1749         struct scsi_host_template *sht;
1750         int bars, max_id, mem_only = 0;
1751         uint16_t req_length = 0, rsp_length = 0;
1752         struct req_que *req = NULL;
1753         struct rsp_que *rsp = NULL;
1754
1755         bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
1756         sht = &qla2xxx_driver_template;
1757         if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
1758             pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
1759             pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8432 ||
1760             pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
1761             pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 ||
1762             pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532 ||
1763             pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8001) {
1764                 bars = pci_select_bars(pdev, IORESOURCE_MEM);
1765                 mem_only = 1;
1766         }
1767
1768         if (mem_only) {
1769                 if (pci_enable_device_mem(pdev))
1770                         goto probe_out;
1771         } else {
1772                 if (pci_enable_device(pdev))
1773                         goto probe_out;
1774         }
1775
1776         /* This may fail but that's ok */
1777         pci_enable_pcie_error_reporting(pdev);
1778
1779         ha = kzalloc(sizeof(struct qla_hw_data), GFP_KERNEL);
1780         if (!ha) {
1781                 DEBUG(printk("Unable to allocate memory for ha\n"));
1782                 goto probe_out;
1783         }
1784         ha->pdev = pdev;
1785
1786         /* Clear our data area */
1787         ha->bars = bars;
1788         ha->mem_only = mem_only;
1789         spin_lock_init(&ha->hardware_lock);
1790
1791         /* Set ISP-type information. */
1792         qla2x00_set_isp_flags(ha);
1793         /* Configure PCI I/O space */
1794         ret = qla2x00_iospace_config(ha);
1795         if (ret)
1796                 goto probe_hw_failed;
1797
1798         qla_printk(KERN_INFO, ha,
1799             "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
1800             ha->iobase);
1801
1802         ha->prev_topology = 0;
1803         ha->init_cb_size = sizeof(init_cb_t);
1804         ha->link_data_rate = PORT_SPEED_UNKNOWN;
1805         ha->optrom_size = OPTROM_SIZE_2300;
1806
1807         /* Assign ISP specific operations. */
1808         max_id = MAX_TARGETS_2200;
1809         if (IS_QLA2100(ha)) {
1810                 max_id = MAX_TARGETS_2100;
1811                 ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
1812                 req_length = REQUEST_ENTRY_CNT_2100;
1813                 rsp_length = RESPONSE_ENTRY_CNT_2100;
1814                 ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
1815                 ha->gid_list_info_size = 4;
1816                 ha->flash_conf_off = ~0;
1817                 ha->flash_data_off = ~0;
1818                 ha->nvram_conf_off = ~0;
1819                 ha->nvram_data_off = ~0;
1820                 ha->isp_ops = &qla2100_isp_ops;
1821         } else if (IS_QLA2200(ha)) {
1822                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1823                 req_length = REQUEST_ENTRY_CNT_2200;
1824                 rsp_length = RESPONSE_ENTRY_CNT_2100;
1825                 ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
1826                 ha->gid_list_info_size = 4;
1827                 ha->flash_conf_off = ~0;
1828                 ha->flash_data_off = ~0;
1829                 ha->nvram_conf_off = ~0;
1830                 ha->nvram_data_off = ~0;
1831                 ha->isp_ops = &qla2100_isp_ops;
1832         } else if (IS_QLA23XX(ha)) {
1833                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1834                 req_length = REQUEST_ENTRY_CNT_2200;
1835                 rsp_length = RESPONSE_ENTRY_CNT_2300;
1836                 ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
1837                 ha->gid_list_info_size = 6;
1838                 if (IS_QLA2322(ha) || IS_QLA6322(ha))
1839                         ha->optrom_size = OPTROM_SIZE_2322;
1840                 ha->flash_conf_off = ~0;
1841                 ha->flash_data_off = ~0;
1842                 ha->nvram_conf_off = ~0;
1843                 ha->nvram_data_off = ~0;
1844                 ha->isp_ops = &qla2300_isp_ops;
1845         } else if (IS_QLA24XX_TYPE(ha)) {
1846                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1847                 req_length = REQUEST_ENTRY_CNT_24XX;
1848                 rsp_length = RESPONSE_ENTRY_CNT_2300;
1849                 ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
1850                 ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
1851                 ha->gid_list_info_size = 8;
1852                 ha->optrom_size = OPTROM_SIZE_24XX;
1853                 ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA24XX;
1854                 ha->isp_ops = &qla24xx_isp_ops;
1855                 ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
1856                 ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
1857                 ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF;
1858                 ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
1859         } else if (IS_QLA25XX(ha)) {
1860                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1861                 req_length = REQUEST_ENTRY_CNT_24XX;
1862                 rsp_length = RESPONSE_ENTRY_CNT_2300;
1863                 ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
1864                 ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
1865                 ha->gid_list_info_size = 8;
1866                 ha->optrom_size = OPTROM_SIZE_25XX;
1867                 ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
1868                 ha->isp_ops = &qla25xx_isp_ops;
1869                 ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
1870                 ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
1871                 ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF;
1872                 ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
1873         } else if (IS_QLA81XX(ha)) {
1874                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1875                 req_length = REQUEST_ENTRY_CNT_24XX;
1876                 rsp_length = RESPONSE_ENTRY_CNT_2300;
1877                 ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
1878                 ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
1879                 ha->gid_list_info_size = 8;
1880                 ha->optrom_size = OPTROM_SIZE_81XX;
1881                 ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
1882                 ha->isp_ops = &qla81xx_isp_ops;
1883                 ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX;
1884                 ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX;
1885                 ha->nvram_conf_off = ~0;
1886                 ha->nvram_data_off = ~0;
1887         }
1888
1889         mutex_init(&ha->vport_lock);
1890         init_completion(&ha->mbx_cmd_comp);
1891         complete(&ha->mbx_cmd_comp);
1892         init_completion(&ha->mbx_intr_comp);
1893
1894         set_bit(0, (unsigned long *) ha->vp_idx_map);
1895
1896         qla2x00_config_dma_addressing(ha);
1897         ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
1898         if (!ret) {
1899                 qla_printk(KERN_WARNING, ha,
1900                     "[ERROR] Failed to allocate memory for adapter\n");
1901
1902                 goto probe_hw_failed;
1903         }
1904
1905         req->max_q_depth = MAX_Q_DEPTH;
1906         if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU)
1907                 req->max_q_depth = ql2xmaxqdepth;
1908
1909
1910         base_vha = qla2x00_create_host(sht, ha);
1911         if (!base_vha) {
1912                 qla_printk(KERN_WARNING, ha,
1913                     "[ERROR] Failed to allocate memory for scsi_host\n");
1914
1915                 ret = -ENOMEM;
1916                 qla2x00_mem_free(ha);
1917                 qla2x00_free_req_que(ha, req);
1918                 qla2x00_free_rsp_que(ha, rsp);
1919                 goto probe_hw_failed;
1920         }
1921
1922         pci_set_drvdata(pdev, base_vha);
1923
1924         host = base_vha->host;
1925         base_vha->req = req;
1926         host->can_queue = req->length + 128;
1927         if (IS_QLA2XXX_MIDTYPE(ha))
1928                 base_vha->mgmt_svr_loop_id = 10 + base_vha->vp_idx;
1929         else
1930                 base_vha->mgmt_svr_loop_id = MANAGEMENT_SERVER +
1931                                                 base_vha->vp_idx;
1932         if (IS_QLA2100(ha))
1933                 host->sg_tablesize = 32;
1934         host->max_id = max_id;
1935         host->this_id = 255;
1936         host->cmd_per_lun = 3;
1937         host->unique_id = host->host_no;
1938         host->max_cmd_len = MAX_CMDSZ;
1939         host->max_channel = MAX_BUSES - 1;
1940         host->max_lun = MAX_LUNS;
1941         host->transportt = qla2xxx_transport_template;
1942
1943         /* Set up the irqs */
1944         ret = qla2x00_request_irqs(ha, rsp);
1945         if (ret)
1946                 goto probe_init_failed;
1947         /* Alloc arrays of request and response ring ptrs */
1948 que_init:
1949         if (!qla2x00_alloc_queues(ha)) {
1950                 qla_printk(KERN_WARNING, ha,
1951                 "[ERROR] Failed to allocate memory for queue"
1952                 " pointers\n");
1953                 goto probe_init_failed;
1954         }
1955         ha->rsp_q_map[0] = rsp;
1956         ha->req_q_map[0] = req;
1957         rsp->req = req;
1958         req->rsp = rsp;
1959         set_bit(0, ha->req_qid_map);
1960         set_bit(0, ha->rsp_qid_map);
1961         /* FWI2-capable only. */
1962         req->req_q_in = &ha->iobase->isp24.req_q_in;
1963         req->req_q_out = &ha->iobase->isp24.req_q_out;
1964         rsp->rsp_q_in = &ha->iobase->isp24.rsp_q_in;
1965         rsp->rsp_q_out = &ha->iobase->isp24.rsp_q_out;
1966         if (ha->mqenable) {
1967                 req->req_q_in = &ha->mqiobase->isp25mq.req_q_in;
1968                 req->req_q_out = &ha->mqiobase->isp25mq.req_q_out;
1969                 rsp->rsp_q_in = &ha->mqiobase->isp25mq.rsp_q_in;
1970                 rsp->rsp_q_out =  &ha->mqiobase->isp25mq.rsp_q_out;
1971         }
1972
1973         if (qla2x00_initialize_adapter(base_vha)) {
1974                 qla_printk(KERN_WARNING, ha,
1975                     "Failed to initialize adapter\n");
1976
1977                 DEBUG2(printk("scsi(%ld): Failed to initialize adapter - "
1978                     "Adapter flags %x.\n",
1979                     base_vha->host_no, base_vha->device_flags));
1980
1981                 ret = -ENODEV;
1982                 goto probe_failed;
1983         }
1984
1985         if (ha->mqenable) {
1986                 if (qla25xx_setup_mode(base_vha)) {
1987                         qla_printk(KERN_WARNING, ha,
1988                                 "Can't create queues, falling back to single"
1989                                 " queue mode\n");
1990                         goto que_init;
1991                 }
1992         }
1993
1994         if (ha->flags.running_gold_fw)
1995                 goto skip_dpc;
1996
1997         /*
1998          * Startup the kernel thread for this host adapter
1999          */
2000         ha->dpc_thread = kthread_create(qla2x00_do_dpc, ha,
2001                         "%s_dpc", base_vha->host_str);
2002         if (IS_ERR(ha->dpc_thread)) {
2003                 qla_printk(KERN_WARNING, ha,
2004                     "Unable to start DPC thread!\n");
2005                 ret = PTR_ERR(ha->dpc_thread);
2006                 goto probe_failed;
2007         }
2008
2009 skip_dpc:
2010         list_add_tail(&base_vha->list, &ha->vp_list);
2011         base_vha->host->irq = ha->pdev->irq;
2012
2013         /* Initialized the timer */
2014         qla2x00_start_timer(base_vha, qla2x00_timer, WATCH_INTERVAL);
2015
2016         DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
2017             base_vha->host_no, ha));
2018
2019         ret = scsi_add_host(host, &pdev->dev);
2020         if (ret)
2021                 goto probe_failed;
2022
2023         base_vha->flags.init_done = 1;
2024         base_vha->flags.online = 1;
2025
2026         ha->isp_ops->enable_intrs(ha);
2027
2028         scsi_scan_host(host);
2029
2030         qla2x00_alloc_sysfs_attr(base_vha);
2031
2032         qla2x00_init_host_attr(base_vha);
2033
2034         qla2x00_dfs_setup(base_vha);
2035
2036         qla_printk(KERN_INFO, ha, "\n"
2037             " QLogic Fibre Channel HBA Driver: %s\n"
2038             "  QLogic %s - %s\n"
2039             "  ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
2040             qla2x00_version_str, ha->model_number,
2041             ha->model_desc ? ha->model_desc : "", pdev->device,
2042             ha->isp_ops->pci_info_str(base_vha, pci_info), pci_name(pdev),
2043             ha->flags.enable_64bit_addressing ? '+' : '-', base_vha->host_no,
2044             ha->isp_ops->fw_version_str(base_vha, fw_str));
2045
2046         return 0;
2047
2048 probe_init_failed:
2049         qla2x00_free_req_que(ha, req);
2050         qla2x00_free_rsp_que(ha, rsp);
2051         ha->max_req_queues = ha->max_rsp_queues = 0;
2052
2053 probe_failed:
2054         if (base_vha->timer_active)
2055                 qla2x00_stop_timer(base_vha);
2056         base_vha->flags.online = 0;
2057         if (ha->dpc_thread) {
2058                 struct task_struct *t = ha->dpc_thread;
2059
2060                 ha->dpc_thread = NULL;
2061                 kthread_stop(t);
2062         }
2063
2064         qla2x00_free_device(base_vha);
2065
2066         scsi_host_put(base_vha->host);
2067
2068 probe_hw_failed:
2069         if (ha->iobase)
2070                 iounmap(ha->iobase);
2071
2072         pci_release_selected_regions(ha->pdev, ha->bars);
2073         kfree(ha);
2074         ha = NULL;
2075
2076 probe_out:
2077         pci_disable_device(pdev);
2078         return ret;
2079 }
2080
2081 static void
2082 qla2x00_remove_one(struct pci_dev *pdev)
2083 {
2084         scsi_qla_host_t *base_vha, *vha, *temp;
2085         struct qla_hw_data  *ha;
2086
2087         base_vha = pci_get_drvdata(pdev);
2088         ha = base_vha->hw;
2089
2090         list_for_each_entry_safe(vha, temp, &ha->vp_list, list) {
2091                 if (vha && vha->fc_vport)
2092                         fc_vport_terminate(vha->fc_vport);
2093         }
2094
2095         set_bit(UNLOADING, &base_vha->dpc_flags);
2096
2097         qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
2098
2099         qla2x00_dfs_remove(base_vha);
2100
2101         qla84xx_put_chip(base_vha);
2102
2103         /* Disable timer */
2104         if (base_vha->timer_active)
2105                 qla2x00_stop_timer(base_vha);
2106
2107         base_vha->flags.online = 0;
2108
2109         /* Flush the work queue and remove it */
2110         if (ha->wq) {
2111                 flush_workqueue(ha->wq);
2112                 destroy_workqueue(ha->wq);
2113                 ha->wq = NULL;
2114         }
2115
2116         /* Kill the kernel thread for this host */
2117         if (ha->dpc_thread) {
2118                 struct task_struct *t = ha->dpc_thread;
2119
2120                 /*
2121                  * qla2xxx_wake_dpc checks for ->dpc_thread
2122                  * so we need to zero it out.
2123                  */
2124                 ha->dpc_thread = NULL;
2125                 kthread_stop(t);
2126         }
2127
2128         qla2x00_free_sysfs_attr(base_vha);
2129
2130         fc_remove_host(base_vha->host);
2131
2132         scsi_remove_host(base_vha->host);
2133
2134         qla2x00_free_device(base_vha);
2135
2136         scsi_host_put(base_vha->host);
2137
2138         if (ha->iobase)
2139                 iounmap(ha->iobase);
2140
2141         if (ha->mqiobase)
2142                 iounmap(ha->mqiobase);
2143
2144         pci_release_selected_regions(ha->pdev, ha->bars);
2145         kfree(ha);
2146         ha = NULL;
2147
2148         pci_disable_device(pdev);
2149         pci_set_drvdata(pdev, NULL);
2150 }
2151
2152 static void
2153 qla2x00_free_device(scsi_qla_host_t *vha)
2154 {
2155         struct qla_hw_data *ha = vha->hw;
2156
2157         qla25xx_delete_queues(vha);
2158
2159         if (ha->flags.fce_enabled)
2160                 qla2x00_disable_fce_trace(vha, NULL, NULL);
2161
2162         if (ha->eft)
2163                 qla2x00_disable_eft_trace(vha);
2164
2165         /* Stop currently executing firmware. */
2166         qla2x00_try_to_stop_firmware(vha);
2167
2168         /* turn-off interrupts on the card */
2169         if (ha->interrupts_on)
2170                 ha->isp_ops->disable_intrs(ha);
2171
2172         qla2x00_free_irqs(vha);
2173
2174         qla2x00_mem_free(ha);
2175
2176         qla2x00_free_queues(ha);
2177 }
2178
2179 static inline void
2180 qla2x00_schedule_rport_del(struct scsi_qla_host *vha, fc_port_t *fcport,
2181     int defer)
2182 {
2183         struct fc_rport *rport;
2184         scsi_qla_host_t *base_vha;
2185
2186         if (!fcport->rport)
2187                 return;
2188
2189         rport = fcport->rport;
2190         if (defer) {
2191                 base_vha = pci_get_drvdata(vha->hw->pdev);
2192                 spin_lock_irq(vha->host->host_lock);
2193                 fcport->drport = rport;
2194                 spin_unlock_irq(vha->host->host_lock);
2195                 set_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags);
2196                 qla2xxx_wake_dpc(base_vha);
2197         } else
2198                 fc_remote_port_delete(rport);
2199 }
2200
2201 /*
2202  * qla2x00_mark_device_lost Updates fcport state when device goes offline.
2203  *
2204  * Input: ha = adapter block pointer.  fcport = port structure pointer.
2205  *
2206  * Return: None.
2207  *
2208  * Context:
2209  */
2210 void qla2x00_mark_device_lost(scsi_qla_host_t *vha, fc_port_t *fcport,
2211     int do_login, int defer)
2212 {
2213         if (atomic_read(&fcport->state) == FCS_ONLINE &&
2214             vha->vp_idx == fcport->vp_idx) {
2215                 atomic_set(&fcport->state, FCS_DEVICE_LOST);
2216                 qla2x00_schedule_rport_del(vha, fcport, defer);
2217         }
2218         /*
2219          * We may need to retry the login, so don't change the state of the
2220          * port but do the retries.
2221          */
2222         if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
2223                 atomic_set(&fcport->state, FCS_DEVICE_LOST);
2224
2225         if (!do_login)
2226                 return;
2227
2228         if (fcport->login_retry == 0) {
2229                 fcport->login_retry = vha->hw->login_retry_count;
2230                 set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
2231
2232                 DEBUG(printk("scsi(%ld): Port login retry: "
2233                     "%02x%02x%02x%02x%02x%02x%02x%02x, "
2234                     "id = 0x%04x retry cnt=%d\n",
2235                     vha->host_no,
2236                     fcport->port_name[0],
2237                     fcport->port_name[1],
2238                     fcport->port_name[2],
2239                     fcport->port_name[3],
2240                     fcport->port_name[4],
2241                     fcport->port_name[5],
2242                     fcport->port_name[6],
2243                     fcport->port_name[7],
2244                     fcport->loop_id,
2245                     fcport->login_retry));
2246         }
2247 }
2248
2249 /*
2250  * qla2x00_mark_all_devices_lost
2251  *      Updates fcport state when device goes offline.
2252  *
2253  * Input:
2254  *      ha = adapter block pointer.
2255  *      fcport = port structure pointer.
2256  *
2257  * Return:
2258  *      None.
2259  *
2260  * Context:
2261  */
2262 void
2263 qla2x00_mark_all_devices_lost(scsi_qla_host_t *vha, int defer)
2264 {
2265         fc_port_t *fcport;
2266
2267         list_for_each_entry(fcport, &vha->vp_fcports, list) {
2268                 if (vha->vp_idx != 0 && vha->vp_idx != fcport->vp_idx)
2269                         continue;
2270
2271                 /*
2272                  * No point in marking the device as lost, if the device is
2273                  * already DEAD.
2274                  */
2275                 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
2276                         continue;
2277                 if (atomic_read(&fcport->state) == FCS_ONLINE) {
2278                         if (defer)
2279                                 qla2x00_schedule_rport_del(vha, fcport, defer);
2280                         else if (vha->vp_idx == fcport->vp_idx)
2281                                 qla2x00_schedule_rport_del(vha, fcport, defer);
2282                 }
2283                 atomic_set(&fcport->state, FCS_DEVICE_LOST);
2284         }
2285 }
2286
2287 /*
2288 * qla2x00_mem_alloc
2289 *      Allocates adapter memory.
2290 *
2291 * Returns:
2292 *      0  = success.
2293 *      !0  = failure.
2294 */
2295 static int
2296 qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,
2297         struct req_que **req, struct rsp_que **rsp)
2298 {
2299         char    name[16];
2300
2301         ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size,
2302                 &ha->init_cb_dma, GFP_KERNEL);
2303         if (!ha->init_cb)
2304                 goto fail;
2305
2306         ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE,
2307                 &ha->gid_list_dma, GFP_KERNEL);
2308         if (!ha->gid_list)
2309                 goto fail_free_init_cb;
2310
2311         ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
2312         if (!ha->srb_mempool)
2313                 goto fail_free_gid_list;
2314
2315         /* Get memory for cached NVRAM */
2316         ha->nvram = kzalloc(MAX_NVRAM_SIZE, GFP_KERNEL);
2317         if (!ha->nvram)
2318                 goto fail_free_srb_mempool;
2319
2320         snprintf(name, sizeof(name), "%s_%d", QLA2XXX_DRIVER_NAME,
2321                 ha->pdev->device);
2322         ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
2323                 DMA_POOL_SIZE, 8, 0);
2324         if (!ha->s_dma_pool)
2325                 goto fail_free_nvram;
2326
2327         /* Allocate memory for SNS commands */
2328         if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
2329         /* Get consistent memory allocated for SNS commands */
2330                 ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev,
2331                 sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma, GFP_KERNEL);
2332                 if (!ha->sns_cmd)
2333                         goto fail_dma_pool;
2334         } else {
2335         /* Get consistent memory allocated for MS IOCB */
2336                 ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
2337                         &ha->ms_iocb_dma);
2338                 if (!ha->ms_iocb)
2339                         goto fail_dma_pool;
2340         /* Get consistent memory allocated for CT SNS commands */
2341                 ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev,
2342                         sizeof(struct ct_sns_pkt), &ha->ct_sns_dma, GFP_KERNEL);
2343                 if (!ha->ct_sns)
2344                         goto fail_free_ms_iocb;
2345         }
2346
2347         /* Allocate memory for request ring */
2348         *req = kzalloc(sizeof(struct req_que), GFP_KERNEL);
2349         if (!*req) {
2350                 DEBUG(printk("Unable to allocate memory for req\n"));
2351                 goto fail_req;
2352         }
2353         (*req)->length = req_len;
2354         (*req)->ring = dma_alloc_coherent(&ha->pdev->dev,
2355                 ((*req)->length + 1) * sizeof(request_t),
2356                 &(*req)->dma, GFP_KERNEL);
2357         if (!(*req)->ring) {
2358                 DEBUG(printk("Unable to allocate memory for req_ring\n"));
2359                 goto fail_req_ring;
2360         }
2361         /* Allocate memory for response ring */
2362         *rsp = kzalloc(sizeof(struct rsp_que), GFP_KERNEL);
2363         if (!*rsp) {
2364                 qla_printk(KERN_WARNING, ha,
2365                         "Unable to allocate memory for rsp\n");
2366                 goto fail_rsp;
2367         }
2368         (*rsp)->hw = ha;
2369         (*rsp)->length = rsp_len;
2370         (*rsp)->ring = dma_alloc_coherent(&ha->pdev->dev,
2371                 ((*rsp)->length + 1) * sizeof(response_t),
2372                 &(*rsp)->dma, GFP_KERNEL);
2373         if (!(*rsp)->ring) {
2374                 qla_printk(KERN_WARNING, ha,
2375                         "Unable to allocate memory for rsp_ring\n");
2376                 goto fail_rsp_ring;
2377         }
2378         (*req)->rsp = *rsp;
2379         (*rsp)->req = *req;
2380         /* Allocate memory for NVRAM data for vports */
2381         if (ha->nvram_npiv_size) {
2382                 ha->npiv_info = kzalloc(sizeof(struct qla_npiv_entry) *
2383                                         ha->nvram_npiv_size, GFP_KERNEL);
2384                 if (!ha->npiv_info) {
2385                         qla_printk(KERN_WARNING, ha,
2386                                 "Unable to allocate memory for npiv info\n");
2387                         goto fail_npiv_info;
2388                 }
2389         } else
2390                 ha->npiv_info = NULL;
2391
2392         /* Get consistent memory allocated for EX-INIT-CB. */
2393         if (IS_QLA81XX(ha)) {
2394                 ha->ex_init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
2395                     &ha->ex_init_cb_dma);
2396                 if (!ha->ex_init_cb)
2397                         goto fail_ex_init_cb;
2398         }
2399
2400         INIT_LIST_HEAD(&ha->vp_list);
2401         return 1;
2402
2403 fail_ex_init_cb:
2404         kfree(ha->npiv_info);
2405 fail_npiv_info:
2406         dma_free_coherent(&ha->pdev->dev, ((*rsp)->length + 1) *
2407                 sizeof(response_t), (*rsp)->ring, (*rsp)->dma);
2408         (*rsp)->ring = NULL;
2409         (*rsp)->dma = 0;
2410 fail_rsp_ring:
2411         kfree(*rsp);
2412 fail_rsp:
2413         dma_free_coherent(&ha->pdev->dev, ((*req)->length + 1) *
2414                 sizeof(request_t), (*req)->ring, (*req)->dma);
2415         (*req)->ring = NULL;
2416         (*req)->dma = 0;
2417 fail_req_ring:
2418         kfree(*req);
2419 fail_req:
2420         dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
2421                 ha->ct_sns, ha->ct_sns_dma);
2422         ha->ct_sns = NULL;
2423         ha->ct_sns_dma = 0;
2424 fail_free_ms_iocb:
2425         dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
2426         ha->ms_iocb = NULL;
2427         ha->ms_iocb_dma = 0;
2428 fail_dma_pool:
2429         dma_pool_destroy(ha->s_dma_pool);
2430         ha->s_dma_pool = NULL;
2431 fail_free_nvram:
2432         kfree(ha->nvram);
2433         ha->nvram = NULL;
2434 fail_free_srb_mempool:
2435         mempool_destroy(ha->srb_mempool);
2436         ha->srb_mempool = NULL;
2437 fail_free_gid_list:
2438         dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
2439         ha->gid_list_dma);
2440         ha->gid_list = NULL;
2441         ha->gid_list_dma = 0;
2442 fail_free_init_cb:
2443         dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, ha->init_cb,
2444         ha->init_cb_dma);
2445         ha->init_cb = NULL;
2446         ha->init_cb_dma = 0;
2447 fail:
2448         DEBUG(printk("%s: Memory allocation failure\n", __func__));
2449         return -ENOMEM;
2450 }
2451
2452 /*
2453 * qla2x00_mem_free
2454 *      Frees all adapter allocated memory.
2455 *
2456 * Input:
2457 *      ha = adapter block pointer.
2458 */
2459 static void
2460 qla2x00_mem_free(struct qla_hw_data *ha)
2461 {
2462         if (ha->srb_mempool)
2463                 mempool_destroy(ha->srb_mempool);
2464
2465         if (ha->fce)
2466                 dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce,
2467                 ha->fce_dma);
2468
2469         if (ha->fw_dump) {
2470                 if (ha->eft)
2471                         dma_free_coherent(&ha->pdev->dev,
2472                         ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma);
2473                 vfree(ha->fw_dump);
2474         }
2475
2476         if (ha->dcbx_tlv)
2477                 dma_free_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
2478                     ha->dcbx_tlv, ha->dcbx_tlv_dma);
2479
2480         if (ha->xgmac_data)
2481                 dma_free_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
2482                     ha->xgmac_data, ha->xgmac_data_dma);
2483
2484         if (ha->sns_cmd)
2485                 dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
2486                 ha->sns_cmd, ha->sns_cmd_dma);
2487
2488         if (ha->ct_sns)
2489                 dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
2490                 ha->ct_sns, ha->ct_sns_dma);
2491
2492         if (ha->sfp_data)
2493                 dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma);
2494
2495         if (ha->edc_data)
2496                 dma_pool_free(ha->s_dma_pool, ha->edc_data, ha->edc_data_dma);
2497
2498         if (ha->ms_iocb)
2499                 dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
2500
2501         if (ha->ex_init_cb)
2502                 dma_pool_free(ha->s_dma_pool, ha->ex_init_cb, ha->ex_init_cb_dma);
2503
2504         if (ha->s_dma_pool)
2505                 dma_pool_destroy(ha->s_dma_pool);
2506
2507         if (ha->gid_list)
2508                 dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
2509                 ha->gid_list_dma);
2510
2511         if (ha->init_cb)
2512                 dma_free_coherent(&ha->pdev->dev, ha->init_cb_size,
2513                 ha->init_cb, ha->init_cb_dma);
2514         vfree(ha->optrom_buffer);
2515         kfree(ha->nvram);
2516         kfree(ha->npiv_info);
2517
2518         ha->srb_mempool = NULL;
2519         ha->eft = NULL;
2520         ha->eft_dma = 0;
2521         ha->sns_cmd = NULL;
2522         ha->sns_cmd_dma = 0;
2523         ha->ct_sns = NULL;
2524         ha->ct_sns_dma = 0;
2525         ha->ms_iocb = NULL;
2526         ha->ms_iocb_dma = 0;
2527         ha->init_cb = NULL;
2528         ha->init_cb_dma = 0;
2529         ha->ex_init_cb = NULL;
2530         ha->ex_init_cb_dma = 0;
2531
2532         ha->s_dma_pool = NULL;
2533
2534         ha->gid_list = NULL;
2535         ha->gid_list_dma = 0;
2536
2537         ha->fw_dump = NULL;
2538         ha->fw_dumped = 0;
2539         ha->fw_dump_reading = 0;
2540 }
2541
2542 struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht,
2543                                                 struct qla_hw_data *ha)
2544 {
2545         struct Scsi_Host *host;
2546         struct scsi_qla_host *vha = NULL;
2547
2548         host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
2549         if (host == NULL) {
2550                 printk(KERN_WARNING
2551                 "qla2xxx: Couldn't allocate host from scsi layer!\n");
2552                 goto fail;
2553         }
2554
2555         /* Clear our data area */
2556         vha = shost_priv(host);
2557         memset(vha, 0, sizeof(scsi_qla_host_t));
2558
2559         vha->host = host;
2560         vha->host_no = host->host_no;
2561         vha->hw = ha;
2562
2563         INIT_LIST_HEAD(&vha->vp_fcports);
2564         INIT_LIST_HEAD(&vha->work_list);
2565         INIT_LIST_HEAD(&vha->list);
2566
2567         spin_lock_init(&vha->work_lock);
2568
2569         sprintf(vha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, vha->host_no);
2570         return vha;
2571
2572 fail:
2573         return vha;
2574 }
2575
2576 static struct qla_work_evt *
2577 qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type)
2578 {
2579         struct qla_work_evt *e;
2580
2581         e = kzalloc(sizeof(struct qla_work_evt), GFP_ATOMIC);
2582         if (!e)
2583                 return NULL;
2584
2585         INIT_LIST_HEAD(&e->list);
2586         e->type = type;
2587         e->flags = QLA_EVT_FLAG_FREE;
2588         return e;
2589 }
2590
2591 static int
2592 qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e)
2593 {
2594         unsigned long flags;
2595
2596         spin_lock_irqsave(&vha->work_lock, flags);
2597         list_add_tail(&e->list, &vha->work_list);
2598         spin_unlock_irqrestore(&vha->work_lock, flags);
2599         qla2xxx_wake_dpc(vha);
2600
2601         return QLA_SUCCESS;
2602 }
2603
2604 int
2605 qla2x00_post_aen_work(struct scsi_qla_host *vha, enum fc_host_event_code code,
2606     u32 data)
2607 {
2608         struct qla_work_evt *e;
2609
2610         e = qla2x00_alloc_work(vha, QLA_EVT_AEN);
2611         if (!e)
2612                 return QLA_FUNCTION_FAILED;
2613
2614         e->u.aen.code = code;
2615         e->u.aen.data = data;
2616         return qla2x00_post_work(vha, e);
2617 }
2618
2619 int
2620 qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb)
2621 {
2622         struct qla_work_evt *e;
2623
2624         e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK);
2625         if (!e)
2626                 return QLA_FUNCTION_FAILED;
2627
2628         memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
2629         return qla2x00_post_work(vha, e);
2630 }
2631
2632 #define qla2x00_post_async_work(name, type)     \
2633 int qla2x00_post_async_##name##_work(           \
2634     struct scsi_qla_host *vha,                  \
2635     fc_port_t *fcport, uint16_t *data)          \
2636 {                                               \
2637         struct qla_work_evt *e;                 \
2638                                                 \
2639         e = qla2x00_alloc_work(vha, type);      \
2640         if (!e)                                 \
2641                 return QLA_FUNCTION_FAILED;     \
2642                                                 \
2643         e->u.logio.fcport = fcport;             \
2644         if (data) {                             \
2645                 e->u.logio.data[0] = data[0];   \
2646                 e->u.logio.data[1] = data[1];   \
2647         }                                       \
2648         return qla2x00_post_work(vha, e);       \
2649 }
2650
2651 qla2x00_post_async_work(login, QLA_EVT_ASYNC_LOGIN);
2652 qla2x00_post_async_work(login_done, QLA_EVT_ASYNC_LOGIN_DONE);
2653 qla2x00_post_async_work(logout, QLA_EVT_ASYNC_LOGOUT);
2654 qla2x00_post_async_work(logout_done, QLA_EVT_ASYNC_LOGOUT_DONE);
2655
2656 void
2657 qla2x00_do_work(struct scsi_qla_host *vha)
2658 {
2659         struct qla_work_evt *e, *tmp;
2660         unsigned long flags;
2661         LIST_HEAD(work);
2662
2663         spin_lock_irqsave(&vha->work_lock, flags);
2664         list_splice_init(&vha->work_list, &work);
2665         spin_unlock_irqrestore(&vha->work_lock, flags);
2666
2667         list_for_each_entry_safe(e, tmp, &work, list) {
2668                 list_del_init(&e->list);
2669
2670                 switch (e->type) {
2671                 case QLA_EVT_AEN:
2672                         fc_host_post_event(vha->host, fc_get_event_number(),
2673                             e->u.aen.code, e->u.aen.data);
2674                         break;
2675                 case QLA_EVT_IDC_ACK:
2676                         qla81xx_idc_ack(vha, e->u.idc_ack.mb);
2677                         break;
2678                 case QLA_EVT_ASYNC_LOGIN:
2679                         qla2x00_async_login(vha, e->u.logio.fcport,
2680                             e->u.logio.data);
2681                         break;
2682                 case QLA_EVT_ASYNC_LOGIN_DONE:
2683                         qla2x00_async_login_done(vha, e->u.logio.fcport,
2684                             e->u.logio.data);
2685                         break;
2686                 case QLA_EVT_ASYNC_LOGOUT:
2687                         qla2x00_async_logout(vha, e->u.logio.fcport);
2688                         break;
2689                 case QLA_EVT_ASYNC_LOGOUT_DONE:
2690                         qla2x00_async_logout_done(vha, e->u.logio.fcport,
2691                             e->u.logio.data);
2692                         break;
2693                 }
2694                 if (e->flags & QLA_EVT_FLAG_FREE)
2695                         kfree(e);
2696         }
2697 }
2698
2699 /* Relogins all the fcports of a vport
2700  * Context: dpc thread
2701  */
2702 void qla2x00_relogin(struct scsi_qla_host *vha)
2703 {
2704         fc_port_t       *fcport;
2705         int status;
2706         uint16_t        next_loopid = 0;
2707         struct qla_hw_data *ha = vha->hw;
2708         uint16_t data[2];
2709
2710         list_for_each_entry(fcport, &vha->vp_fcports, list) {
2711         /*
2712          * If the port is not ONLINE then try to login
2713          * to it if we haven't run out of retries.
2714          */
2715                 if (atomic_read(&fcport->state) !=
2716                         FCS_ONLINE && fcport->login_retry) {
2717
2718                         fcport->login_retry--;
2719                         if (fcport->flags & FCF_FABRIC_DEVICE) {
2720                                 if (fcport->flags & FCF_TAPE_PRESENT)
2721                                         ha->isp_ops->fabric_logout(vha,
2722                                                         fcport->loop_id,
2723                                                         fcport->d_id.b.domain,
2724                                                         fcport->d_id.b.area,
2725                                                         fcport->d_id.b.al_pa);
2726
2727                                 if (IS_ALOGIO_CAPABLE(ha)) {
2728                                         data[0] = 0;
2729                                         data[1] = QLA_LOGIO_LOGIN_RETRIED;
2730                                         status = qla2x00_post_async_login_work(
2731                                             vha, fcport, data);
2732                                         if (status == QLA_SUCCESS)
2733                                                 continue;
2734                                         /* Attempt a retry. */
2735                                         status = 1;
2736                                 } else
2737                                         status = qla2x00_fabric_login(vha,
2738                                             fcport, &next_loopid);
2739                         } else
2740                                 status = qla2x00_local_device_login(vha,
2741                                                                 fcport);
2742
2743                         if (status == QLA_SUCCESS) {
2744                                 fcport->old_loop_id = fcport->loop_id;
2745
2746                                 DEBUG(printk("scsi(%ld): port login OK: logged "
2747                                 "in ID 0x%x\n", vha->host_no, fcport->loop_id));
2748
2749                                 qla2x00_update_fcport(vha, fcport);
2750
2751                         } else if (status == 1) {
2752                                 set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
2753                                 /* retry the login again */
2754                                 DEBUG(printk("scsi(%ld): Retrying"
2755                                 " %d login again loop_id 0x%x\n",
2756                                 vha->host_no, fcport->login_retry,
2757                                                 fcport->loop_id));
2758                         } else {
2759                                 fcport->login_retry = 0;
2760                         }
2761
2762                         if (fcport->login_retry == 0 && status != QLA_SUCCESS)
2763                                 fcport->loop_id = FC_NO_LOOP_ID;
2764                 }
2765                 if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
2766                         break;
2767         }
2768 }
2769
2770 /**************************************************************************
2771 * qla2x00_do_dpc
2772 *   This kernel thread is a task that is schedule by the interrupt handler
2773 *   to perform the background processing for interrupts.
2774 *
2775 * Notes:
2776 * This task always run in the context of a kernel thread.  It
2777 * is kick-off by the driver's detect code and starts up
2778 * up one per adapter. It immediately goes to sleep and waits for
2779 * some fibre event.  When either the interrupt handler or
2780 * the timer routine detects a event it will one of the task
2781 * bits then wake us up.
2782 **************************************************************************/
2783 static int
2784 qla2x00_do_dpc(void *data)
2785 {
2786         int             rval;
2787         scsi_qla_host_t *base_vha;
2788         struct qla_hw_data *ha;
2789
2790         ha = (struct qla_hw_data *)data;
2791         base_vha = pci_get_drvdata(ha->pdev);
2792
2793         set_user_nice(current, -20);
2794
2795         while (!kthread_should_stop()) {
2796                 DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
2797
2798                 set_current_state(TASK_INTERRUPTIBLE);
2799                 schedule();
2800                 __set_current_state(TASK_RUNNING);
2801
2802                 DEBUG3(printk("qla2x00: DPC handler waking up\n"));
2803
2804                 /* Initialization not yet finished. Don't do anything yet. */
2805                 if (!base_vha->flags.init_done)
2806                         continue;
2807
2808                 DEBUG3(printk("scsi(%ld): DPC handler\n", base_vha->host_no));
2809
2810                 ha->dpc_active = 1;
2811
2812                 if (ha->flags.mbox_busy) {
2813                         ha->dpc_active = 0;
2814                         continue;
2815                 }
2816
2817                 qla2x00_do_work(base_vha);
2818
2819                 if (test_and_clear_bit(ISP_ABORT_NEEDED,
2820                                                 &base_vha->dpc_flags)) {
2821
2822                         DEBUG(printk("scsi(%ld): dpc: sched "
2823                             "qla2x00_abort_isp ha = %p\n",
2824                             base_vha->host_no, ha));
2825                         if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
2826                             &base_vha->dpc_flags))) {
2827
2828                                 if (qla2x00_abort_isp(base_vha)) {
2829                                         /* failed. retry later */
2830                                         set_bit(ISP_ABORT_NEEDED,
2831                                             &base_vha->dpc_flags);
2832                                 }
2833                                 clear_bit(ABORT_ISP_ACTIVE,
2834                                                 &base_vha->dpc_flags);
2835                         }
2836
2837                         DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n",
2838                             base_vha->host_no));
2839                 }
2840
2841                 if (test_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags)) {
2842                         qla2x00_update_fcports(base_vha);
2843                         clear_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags);
2844                 }
2845
2846                 if (test_and_clear_bit(RESET_MARKER_NEEDED,
2847                                                         &base_vha->dpc_flags) &&
2848                     (!(test_and_set_bit(RESET_ACTIVE, &base_vha->dpc_flags)))) {
2849
2850                         DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n",
2851                             base_vha->host_no));
2852
2853                         qla2x00_rst_aen(base_vha);
2854                         clear_bit(RESET_ACTIVE, &base_vha->dpc_flags);
2855                 }
2856
2857                 /* Retry each device up to login retry count */
2858                 if ((test_and_clear_bit(RELOGIN_NEEDED,
2859                                                 &base_vha->dpc_flags)) &&
2860                     !test_bit(LOOP_RESYNC_NEEDED, &base_vha->dpc_flags) &&
2861                     atomic_read(&base_vha->loop_state) != LOOP_DOWN) {
2862
2863                         DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
2864                                         base_vha->host_no));
2865                         qla2x00_relogin(base_vha);
2866
2867                         DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
2868                             base_vha->host_no));
2869                 }
2870
2871                 if (test_and_clear_bit(LOOP_RESYNC_NEEDED,
2872                                                         &base_vha->dpc_flags)) {
2873
2874                         DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
2875                                 base_vha->host_no));
2876
2877                         if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
2878                             &base_vha->dpc_flags))) {
2879
2880                                 rval = qla2x00_loop_resync(base_vha);
2881
2882                                 clear_bit(LOOP_RESYNC_ACTIVE,
2883                                                 &base_vha->dpc_flags);
2884                         }
2885
2886                         DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n",
2887                             base_vha->host_no));
2888                 }
2889
2890                 if (test_bit(NPIV_CONFIG_NEEDED, &base_vha->dpc_flags) &&
2891                     atomic_read(&base_vha->loop_state) == LOOP_READY) {
2892                         clear_bit(NPIV_CONFIG_NEEDED, &base_vha->dpc_flags);
2893                         qla2xxx_flash_npiv_conf(base_vha);
2894                 }
2895
2896                 if (!ha->interrupts_on)
2897                         ha->isp_ops->enable_intrs(ha);
2898
2899                 if (test_and_clear_bit(BEACON_BLINK_NEEDED,
2900                                         &base_vha->dpc_flags))
2901                         ha->isp_ops->beacon_blink(base_vha);
2902
2903                 qla2x00_do_dpc_all_vps(base_vha);
2904
2905                 ha->dpc_active = 0;
2906         } /* End of while(1) */
2907
2908         DEBUG(printk("scsi(%ld): DPC handler exiting\n", base_vha->host_no));
2909
2910         /*
2911          * Make sure that nobody tries to wake us up again.
2912          */
2913         ha->dpc_active = 0;
2914
2915         /* Cleanup any residual CTX SRBs. */
2916         qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
2917
2918         return 0;
2919 }
2920
2921 void
2922 qla2xxx_wake_dpc(struct scsi_qla_host *vha)
2923 {
2924         struct qla_hw_data *ha = vha->hw;
2925         struct task_struct *t = ha->dpc_thread;
2926
2927         if (!test_bit(UNLOADING, &vha->dpc_flags) && t)
2928                 wake_up_process(t);
2929 }
2930
2931 /*
2932 *  qla2x00_rst_aen
2933 *      Processes asynchronous reset.
2934 *
2935 * Input:
2936 *      ha  = adapter block pointer.
2937 */
2938 static void
2939 qla2x00_rst_aen(scsi_qla_host_t *vha)
2940 {
2941         if (vha->flags.online && !vha->flags.reset_active &&
2942             !atomic_read(&vha->loop_down_timer) &&
2943             !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))) {
2944                 do {
2945                         clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
2946
2947                         /*
2948                          * Issue marker command only when we are going to start
2949                          * the I/O.
2950                          */
2951                         vha->marker_needed = 1;
2952                 } while (!atomic_read(&vha->loop_down_timer) &&
2953                     (test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags)));
2954         }
2955 }
2956
2957 static void
2958 qla2x00_sp_free_dma(srb_t *sp)
2959 {
2960         struct scsi_cmnd *cmd = sp->cmd;
2961
2962         if (sp->flags & SRB_DMA_VALID) {
2963                 scsi_dma_unmap(cmd);
2964                 sp->flags &= ~SRB_DMA_VALID;
2965         }
2966         CMD_SP(cmd) = NULL;
2967 }
2968
2969 void
2970 qla2x00_sp_compl(struct qla_hw_data *ha, srb_t *sp)
2971 {
2972         struct scsi_cmnd *cmd = sp->cmd;
2973
2974         qla2x00_sp_free_dma(sp);
2975
2976         mempool_free(sp, ha->srb_mempool);
2977
2978         cmd->scsi_done(cmd);
2979 }
2980
2981 /**************************************************************************
2982 *   qla2x00_timer
2983 *
2984 * Description:
2985 *   One second timer
2986 *
2987 * Context: Interrupt
2988 ***************************************************************************/
2989 void
2990 qla2x00_timer(scsi_qla_host_t *vha)
2991 {
2992         unsigned long   cpu_flags = 0;
2993         fc_port_t       *fcport;
2994         int             start_dpc = 0;
2995         int             index;
2996         srb_t           *sp;
2997         int             t;
2998         struct qla_hw_data *ha = vha->hw;
2999         struct req_que *req;
3000         /*
3001          * Ports - Port down timer.
3002          *
3003          * Whenever, a port is in the LOST state we start decrementing its port
3004          * down timer every second until it reaches zero. Once  it reaches zero
3005          * the port it marked DEAD.
3006          */
3007         t = 0;
3008         list_for_each_entry(fcport, &vha->vp_fcports, list) {
3009                 if (fcport->port_type != FCT_TARGET)
3010                         continue;
3011
3012                 if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
3013
3014                         if (atomic_read(&fcport->port_down_timer) == 0)
3015                                 continue;
3016
3017                         if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
3018                                 atomic_set(&fcport->state, FCS_DEVICE_DEAD);
3019
3020                         DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
3021                             "%d remaining\n",
3022                             vha->host_no,
3023                             t, atomic_read(&fcport->port_down_timer)));
3024                 }
3025                 t++;
3026         } /* End of for fcport  */
3027
3028
3029         /* Loop down handler. */
3030         if (atomic_read(&vha->loop_down_timer) > 0 &&
3031             !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
3032                 && vha->flags.online) {
3033
3034                 if (atomic_read(&vha->loop_down_timer) ==
3035                     vha->loop_down_abort_time) {
3036
3037                         DEBUG(printk("scsi(%ld): Loop Down - aborting the "
3038                             "queues before time expire\n",
3039                             vha->host_no));
3040
3041                         if (!IS_QLA2100(ha) && vha->link_down_timeout)
3042                                 atomic_set(&vha->loop_state, LOOP_DEAD);
3043
3044                         /* Schedule an ISP abort to return any tape commands. */
3045                         /* NPIV - scan physical port only */
3046                         if (!vha->vp_idx) {
3047                                 spin_lock_irqsave(&ha->hardware_lock,
3048                                     cpu_flags);
3049                                 req = ha->req_q_map[0];
3050                                 for (index = 1;
3051                                     index < MAX_OUTSTANDING_COMMANDS;
3052                                     index++) {
3053                                         fc_port_t *sfcp;
3054
3055                                         sp = req->outstanding_cmds[index];
3056                                         if (!sp)
3057                                                 continue;
3058                                         if (sp->ctx)
3059                                                 continue;
3060                                         sfcp = sp->fcport;
3061                                         if (!(sfcp->flags & FCF_TAPE_PRESENT))
3062                                                 continue;
3063
3064                                         set_bit(ISP_ABORT_NEEDED,
3065                                                         &vha->dpc_flags);
3066                                         break;
3067                                 }
3068                                 spin_unlock_irqrestore(&ha->hardware_lock,
3069                                                                 cpu_flags);
3070                         }
3071                         start_dpc++;
3072                 }
3073
3074                 /* if the loop has been down for 4 minutes, reinit adapter */
3075                 if (atomic_dec_and_test(&vha->loop_down_timer) != 0) {
3076                         if (!(vha->device_flags & DFLG_NO_CABLE)) {
3077                                 DEBUG(printk("scsi(%ld): Loop down - "
3078                                     "aborting ISP.\n",
3079                                     vha->host_no));
3080                                 qla_printk(KERN_WARNING, ha,
3081                                     "Loop down - aborting ISP.\n");
3082
3083                                 set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
3084                         }
3085                 }
3086                 DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
3087                     vha->host_no,
3088                     atomic_read(&vha->loop_down_timer)));
3089         }
3090
3091         /* Check if beacon LED needs to be blinked */
3092         if (ha->beacon_blink_led == 1) {
3093                 set_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags);
3094                 start_dpc++;
3095         }
3096
3097         /* Process any deferred work. */
3098         if (!list_empty(&vha->work_list))
3099                 start_dpc++;
3100
3101         /* Schedule the DPC routine if needed */
3102         if ((test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
3103             test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags) ||
3104             test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags) ||
3105             start_dpc ||
3106             test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags) ||
3107             test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags) ||
3108             test_bit(VP_DPC_NEEDED, &vha->dpc_flags) ||
3109             test_bit(RELOGIN_NEEDED, &vha->dpc_flags)))
3110                 qla2xxx_wake_dpc(vha);
3111
3112         qla2x00_restart_timer(vha, WATCH_INTERVAL);
3113 }
3114
3115 /* Firmware interface routines. */
3116
3117 #define FW_BLOBS        7
3118 #define FW_ISP21XX      0
3119 #define FW_ISP22XX      1
3120 #define FW_ISP2300      2
3121 #define FW_ISP2322      3
3122 #define FW_ISP24XX      4
3123 #define FW_ISP25XX      5
3124 #define FW_ISP81XX      6
3125
3126 #define FW_FILE_ISP21XX "/*(DEBLOBBED)*/"
3127 #define FW_FILE_ISP22XX "/*(DEBLOBBED)*/"
3128 #define FW_FILE_ISP2300 "/*(DEBLOBBED)*/"
3129 #define FW_FILE_ISP2322 "/*(DEBLOBBED)*/"
3130 #define FW_FILE_ISP24XX "/*(DEBLOBBED)*/"
3131 #define FW_FILE_ISP25XX "/*(DEBLOBBED)*/"
3132 #define FW_FILE_ISP81XX "/*(DEBLOBBED)*/"
3133
3134 static DEFINE_MUTEX(qla_fw_lock);
3135
3136 static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
3137         { .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
3138         { .name = FW_FILE_ISP22XX, .segs = { 0x1000, 0 }, },
3139         { .name = FW_FILE_ISP2300, .segs = { 0x800, 0 }, },
3140         { .name = FW_FILE_ISP2322, .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
3141         { .name = FW_FILE_ISP24XX, },
3142         { .name = FW_FILE_ISP25XX, },
3143         { .name = FW_FILE_ISP81XX, },
3144 };
3145
3146 struct fw_blob *
3147 qla2x00_reject_firmware(scsi_qla_host_t *vha)
3148 {
3149         struct qla_hw_data *ha = vha->hw;
3150         struct fw_blob *blob;
3151
3152         blob = NULL;
3153         if (IS_QLA2100(ha)) {
3154                 blob = &qla_fw_blobs[FW_ISP21XX];
3155         } else if (IS_QLA2200(ha)) {
3156                 blob = &qla_fw_blobs[FW_ISP22XX];
3157         } else if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
3158                 blob = &qla_fw_blobs[FW_ISP2300];
3159         } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
3160                 blob = &qla_fw_blobs[FW_ISP2322];
3161         } else if (IS_QLA24XX_TYPE(ha)) {
3162                 blob = &qla_fw_blobs[FW_ISP24XX];
3163         } else if (IS_QLA25XX(ha)) {
3164                 blob = &qla_fw_blobs[FW_ISP25XX];
3165         } else if (IS_QLA81XX(ha)) {
3166                 blob = &qla_fw_blobs[FW_ISP81XX];
3167         }
3168
3169         mutex_lock(&qla_fw_lock);
3170         if (blob->fw)
3171                 goto out;
3172
3173         if (reject_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
3174                 DEBUG2(printk("scsi(%ld): Failed to load firmware image "
3175                     "(%s).\n", vha->host_no, blob->name));
3176                 blob->fw = NULL;
3177                 blob = NULL;
3178                 goto out;
3179         }
3180
3181 out:
3182         mutex_unlock(&qla_fw_lock);
3183         return blob;
3184 }
3185
3186 static void
3187 qla2x00_release_firmware(void)
3188 {
3189         int idx;
3190
3191         mutex_lock(&qla_fw_lock);
3192         for (idx = 0; idx < FW_BLOBS; idx++)
3193                 if (qla_fw_blobs[idx].fw)
3194                         release_firmware(qla_fw_blobs[idx].fw);
3195         mutex_unlock(&qla_fw_lock);
3196 }
3197
3198 static pci_ers_result_t
3199 qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
3200 {
3201         scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
3202
3203         switch (state) {
3204         case pci_channel_io_normal:
3205                 return PCI_ERS_RESULT_CAN_RECOVER;
3206         case pci_channel_io_frozen:
3207                 pci_disable_device(pdev);
3208                 return PCI_ERS_RESULT_NEED_RESET;
3209         case pci_channel_io_perm_failure:
3210                 qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
3211                 return PCI_ERS_RESULT_DISCONNECT;
3212         }
3213         return PCI_ERS_RESULT_NEED_RESET;
3214 }
3215
3216 static pci_ers_result_t
3217 qla2xxx_pci_mmio_enabled(struct pci_dev *pdev)
3218 {
3219         int risc_paused = 0;
3220         uint32_t stat;
3221         unsigned long flags;
3222         scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
3223         struct qla_hw_data *ha = base_vha->hw;
3224         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
3225         struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
3226
3227         spin_lock_irqsave(&ha->hardware_lock, flags);
3228         if (IS_QLA2100(ha) || IS_QLA2200(ha)){
3229                 stat = RD_REG_DWORD(&reg->hccr);
3230                 if (stat & HCCR_RISC_PAUSE)
3231                         risc_paused = 1;
3232         } else if (IS_QLA23XX(ha)) {
3233                 stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
3234                 if (stat & HSR_RISC_PAUSED)
3235                         risc_paused = 1;
3236         } else if (IS_FWI2_CAPABLE(ha)) {
3237                 stat = RD_REG_DWORD(&reg24->host_status);
3238                 if (stat & HSRX_RISC_PAUSED)
3239                         risc_paused = 1;
3240         }
3241         spin_unlock_irqrestore(&ha->hardware_lock, flags);
3242
3243         if (risc_paused) {
3244                 qla_printk(KERN_INFO, ha, "RISC paused -- mmio_enabled, "
3245                     "Dumping firmware!\n");
3246                 ha->isp_ops->fw_dump(base_vha, 0);
3247
3248                 return PCI_ERS_RESULT_NEED_RESET;
3249         } else
3250                 return PCI_ERS_RESULT_RECOVERED;
3251 }
3252
3253 static pci_ers_result_t
3254 qla2xxx_pci_slot_reset(struct pci_dev *pdev)
3255 {
3256         pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT;
3257         scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
3258         struct qla_hw_data *ha = base_vha->hw;
3259         int rc;
3260
3261         if (ha->mem_only)
3262                 rc = pci_enable_device_mem(pdev);
3263         else
3264                 rc = pci_enable_device(pdev);
3265
3266         if (rc) {
3267                 qla_printk(KERN_WARNING, ha,
3268                     "Can't re-enable PCI device after reset.\n");
3269
3270                 return ret;
3271         }
3272         pci_set_master(pdev);
3273
3274         if (ha->isp_ops->pci_config(base_vha))
3275                 return ret;
3276
3277         set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
3278         if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS)
3279                 ret =  PCI_ERS_RESULT_RECOVERED;
3280         clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
3281
3282         return ret;
3283 }
3284
3285 static void
3286 qla2xxx_pci_resume(struct pci_dev *pdev)
3287 {
3288         scsi_qla_host_t *base_vha = pci_get_drvdata(pdev);
3289         struct qla_hw_data *ha = base_vha->hw;
3290         int ret;
3291
3292         ret = qla2x00_wait_for_hba_online(base_vha);
3293         if (ret != QLA_SUCCESS) {
3294                 qla_printk(KERN_ERR, ha,
3295                     "the device failed to resume I/O "
3296                     "from slot/link_reset");
3297         }
3298         pci_cleanup_aer_uncorrect_error_status(pdev);
3299 }
3300
3301 static struct pci_error_handlers qla2xxx_err_handler = {
3302         .error_detected = qla2xxx_pci_error_detected,
3303         .mmio_enabled = qla2xxx_pci_mmio_enabled,
3304         .slot_reset = qla2xxx_pci_slot_reset,
3305         .resume = qla2xxx_pci_resume,
3306 };
3307
3308 static struct pci_device_id qla2xxx_pci_tbl[] = {
3309         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) },
3310         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) },
3311         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300) },
3312         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312) },
3313         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322) },
3314         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312) },
3315         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322) },
3316         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422) },
3317         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) },
3318         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8432) },
3319         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
3320         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
3321         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) },
3322         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8001) },
3323         { 0 },
3324 };
3325 MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
3326
3327 static struct pci_driver qla2xxx_pci_driver = {
3328         .name           = QLA2XXX_DRIVER_NAME,
3329         .driver         = {
3330                 .owner          = THIS_MODULE,
3331         },
3332         .id_table       = qla2xxx_pci_tbl,
3333         .probe          = qla2x00_probe_one,
3334         .remove         = qla2x00_remove_one,
3335         .err_handler    = &qla2xxx_err_handler,
3336 };
3337
3338 /**
3339  * qla2x00_module_init - Module initialization.
3340  **/
3341 static int __init
3342 qla2x00_module_init(void)
3343 {
3344         int ret = 0;
3345
3346         /* Allocate cache for SRBs. */
3347         srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
3348             SLAB_HWCACHE_ALIGN, NULL);
3349         if (srb_cachep == NULL) {
3350                 printk(KERN_ERR
3351                     "qla2xxx: Unable to allocate SRB cache...Failing load!\n");
3352                 return -ENOMEM;
3353         }
3354
3355         /* Derive version string. */
3356         strcpy(qla2x00_version_str, QLA2XXX_VERSION);
3357         if (ql2xextended_error_logging)
3358                 strcat(qla2x00_version_str, "-debug");
3359
3360         qla2xxx_transport_template =
3361             fc_attach_transport(&qla2xxx_transport_functions);
3362         if (!qla2xxx_transport_template) {
3363                 kmem_cache_destroy(srb_cachep);
3364                 return -ENODEV;
3365         }
3366         qla2xxx_transport_vport_template =
3367             fc_attach_transport(&qla2xxx_transport_vport_functions);
3368         if (!qla2xxx_transport_vport_template) {
3369                 kmem_cache_destroy(srb_cachep);
3370                 fc_release_transport(qla2xxx_transport_template);
3371                 return -ENODEV;
3372         }
3373
3374         printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n",
3375             qla2x00_version_str);
3376         ret = pci_register_driver(&qla2xxx_pci_driver);
3377         if (ret) {
3378                 kmem_cache_destroy(srb_cachep);
3379                 fc_release_transport(qla2xxx_transport_template);
3380                 fc_release_transport(qla2xxx_transport_vport_template);
3381         }
3382         return ret;
3383 }
3384
3385 /**
3386  * qla2x00_module_exit - Module cleanup.
3387  **/
3388 static void __exit
3389 qla2x00_module_exit(void)
3390 {
3391         pci_unregister_driver(&qla2xxx_pci_driver);
3392         qla2x00_release_firmware();
3393         kmem_cache_destroy(srb_cachep);
3394         fc_release_transport(qla2xxx_transport_template);
3395         fc_release_transport(qla2xxx_transport_vport_template);
3396 }
3397
3398 module_init(qla2x00_module_init);
3399 module_exit(qla2x00_module_exit);
3400
3401 MODULE_AUTHOR("QLogic Corporation");
3402 MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
3403 MODULE_LICENSE("GPL");
3404 MODULE_VERSION(QLA2XXX_VERSION);
3405 /*(DEBLOBBED)*/