drivers/scsi/aic7xxx/aic7xxx_core.c

   1 /*
   2  * Core routines and tables shareable across OS platforms.
   3  *
   4  * Copyright (c) 1994-2002 Justin T. Gibbs.
   5  * Copyright (c) 2000-2002 Adaptec Inc.
   6  * All rights reserved.
   7  *
   8  * Redistribution and use in source and binary forms, with or without
   9  * modification, are permitted provided that the following conditions
  10  * are met:
  11  * 1. Redistributions of source code must retain the above copyright
  12  *    notice, this list of conditions, and the following disclaimer,
  13  *    without modification.
  14  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  15  *    substantially similar to the "NO WARRANTY" disclaimer below
  16  *    ("Disclaimer") and any redistribution must be conditioned upon
  17  *    including a substantially similar Disclaimer requirement for further
  18  *    binary redistribution.
  19  * 3. Neither the names of the above-listed copyright holders nor the names
  20  *    of any contributors may be used to endorse or promote products derived
  21  *    from this software without specific prior written permission.
  22  *
  23  * Alternatively, this software may be distributed under the terms of the
  24  * GNU General Public License ("GPL") version 2 as published by the Free
  25  * Software Foundation.
  26  *
  27  * NO WARRANTY
  28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  29  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  30  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  31  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  32  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  33  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  34  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  36  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  37  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  38  * POSSIBILITY OF SUCH DAMAGES.
  39  *
  40  * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.c#155 $
  41  */
  42
  43 #include "aic7xxx_osm.h"
  44 #include "aic7xxx_inline.h"
  45 #include "aicasm/aicasm_insformat.h"
  46
  47 /***************************** Lookup Tables **********************************/
  48 static const char *const ahc_chip_names[] = {
  49         "NONE",
  50         "aic7770",
  51         "aic7850",
  52         "aic7855",
  53         "aic7859",
  54         "aic7860",
  55         "aic7870",
  56         "aic7880",
  57         "aic7895",
  58         "aic7895C",
  59         "aic7890/91",
  60         "aic7896/97",
  61         "aic7892",
  62         "aic7899"
  63 };
  64
  65 /*
  66  * Hardware error codes.
  67  */
  68 struct ahc_hard_error_entry {
  69         uint8_t errno;
  70         const char *errmesg;
  71 };
  72
  73 static const struct ahc_hard_error_entry ahc_hard_errors[] = {
  74         { ILLHADDR,     "Illegal Host Access" },
  75         { ILLSADDR,     "Illegal Sequencer Address referenced" },
  76         { ILLOPCODE,    "Illegal Opcode in sequencer program" },
  77         { SQPARERR,     "Sequencer Parity Error" },
  78         { DPARERR,      "Data-path Parity Error" },
  79         { MPARERR,      "Scratch or SCB Memory Parity Error" },
  80         { PCIERRSTAT,   "PCI Error detected" },
  81         { CIOPARERR,    "CIOBUS Parity Error" },
  82 };
  83 static const u_int num_errors = ARRAY_SIZE(ahc_hard_errors);
  84
  85 static const struct ahc_phase_table_entry ahc_phase_table[] =
  86 {
  87         { P_DATAOUT,    MSG_NOOP,               "in Data-out phase"     },
  88         { P_DATAIN,     MSG_INITIATOR_DET_ERR,  "in Data-in phase"      },
  89         { P_DATAOUT_DT, MSG_NOOP,               "in DT Data-out phase"  },
  90         { P_DATAIN_DT,  MSG_INITIATOR_DET_ERR,  "in DT Data-in phase"   },
  91         { P_COMMAND,    MSG_NOOP,               "in Command phase"      },
  92         { P_MESGOUT,    MSG_NOOP,               "in Message-out phase"  },
  93         { P_STATUS,     MSG_INITIATOR_DET_ERR,  "in Status phase"       },
  94         { P_MESGIN,     MSG_PARITY_ERROR,       "in Message-in phase"   },
  95         { P_BUSFREE,    MSG_NOOP,               "while idle"            },
  96         { 0,            MSG_NOOP,               "in unknown phase"      }
  97 };
  98
  99 /*
 100  * In most cases we only wish to itterate over real phases, so
 101  * exclude the last element from the count.
 102  */
 103 static const u_int num_phases = ARRAY_SIZE(ahc_phase_table) - 1;
 104
 105 /*
 106  * Valid SCSIRATE values.  (p. 3-17)
 107  * Provides a mapping of tranfer periods in ns to the proper value to
 108  * stick in the scsixfer reg.
 109  */
 110 static const struct ahc_syncrate ahc_syncrates[] =
 111 {
 112       /* ultra2    fast/ultra  period     rate */
 113         { 0x42,      0x000,      9,      "80.0" },
 114         { 0x03,      0x000,     10,      "40.0" },
 115         { 0x04,      0x000,     11,      "33.0" },
 116         { 0x05,      0x100,     12,      "20.0" },
 117         { 0x06,      0x110,     15,      "16.0" },
 118         { 0x07,      0x120,     18,      "13.4" },
 119         { 0x08,      0x000,     25,      "10.0" },
 120         { 0x19,      0x010,     31,      "8.0"  },
 121         { 0x1a,      0x020,     37,      "6.67" },
 122         { 0x1b,      0x030,     43,      "5.7"  },
 123         { 0x1c,      0x040,     50,      "5.0"  },
 124         { 0x00,      0x050,     56,      "4.4"  },
 125         { 0x00,      0x060,     62,      "4.0"  },
 126         { 0x00,      0x070,     68,      "3.6"  },
 127         { 0x00,      0x000,      0,      NULL   }
 128 };
 129
 130 /* Our Sequencer Program */
 131 #include "aic7xxx_seq.h"
 132
 133 /**************************** Function Declarations ***************************/
 134 static void             ahc_force_renegotiation(struct ahc_softc *ahc,
 135                                                 struct ahc_devinfo *devinfo);
 136 static struct ahc_tmode_tstate*
 137                         ahc_alloc_tstate(struct ahc_softc *ahc,
 138                                          u_int scsi_id, char channel);
 139 #ifdef AHC_TARGET_MODE
 140 static void             ahc_free_tstate(struct ahc_softc *ahc,
 141                                         u_int scsi_id, char channel, int force);
 142 #endif
 143 static const struct ahc_syncrate*
 144                         ahc_devlimited_syncrate(struct ahc_softc *ahc,
 145                                                 struct ahc_initiator_tinfo *,
 146                                                 u_int *period,
 147                                                 u_int *ppr_options,
 148                                                 role_t role);
 149 static void             ahc_update_pending_scbs(struct ahc_softc *ahc);
 150 static void             ahc_fetch_devinfo(struct ahc_softc *ahc,
 151                                           struct ahc_devinfo *devinfo);
 152 static void             ahc_scb_devinfo(struct ahc_softc *ahc,
 153                                         struct ahc_devinfo *devinfo,
 154                                         struct scb *scb);
 155 static void             ahc_assert_atn(struct ahc_softc *ahc);
 156 static void             ahc_setup_initiator_msgout(struct ahc_softc *ahc,
 157                                                    struct ahc_devinfo *devinfo,
 158                                                    struct scb *scb);
 159 static void             ahc_build_transfer_msg(struct ahc_softc *ahc,
 160                                                struct ahc_devinfo *devinfo);
 161 static void             ahc_construct_sdtr(struct ahc_softc *ahc,
 162                                            struct ahc_devinfo *devinfo,
 163                                            u_int period, u_int offset);
 164 static void             ahc_construct_wdtr(struct ahc_softc *ahc,
 165                                            struct ahc_devinfo *devinfo,
 166                                            u_int bus_width);
 167 static void             ahc_construct_ppr(struct ahc_softc *ahc,
 168                                           struct ahc_devinfo *devinfo,
 169                                           u_int period, u_int offset,
 170                                           u_int bus_width, u_int ppr_options);
 171 static void             ahc_clear_msg_state(struct ahc_softc *ahc);
 172 static void             ahc_handle_proto_violation(struct ahc_softc *ahc);
 173 static void             ahc_handle_message_phase(struct ahc_softc *ahc);
 174 typedef enum {
 175         AHCMSG_1B,
 176         AHCMSG_2B,
 177         AHCMSG_EXT
 178 } ahc_msgtype;
 179 static int              ahc_sent_msg(struct ahc_softc *ahc, ahc_msgtype type,
 180                                      u_int msgval, int full);
 181 static int              ahc_parse_msg(struct ahc_softc *ahc,
 182                                       struct ahc_devinfo *devinfo);
 183 static int              ahc_handle_msg_reject(struct ahc_softc *ahc,
 184                                               struct ahc_devinfo *devinfo);
 185 static void             ahc_handle_ign_wide_residue(struct ahc_softc *ahc,
 186                                                 struct ahc_devinfo *devinfo);
 187 static void             ahc_reinitialize_dataptrs(struct ahc_softc *ahc);
 188 static void             ahc_handle_devreset(struct ahc_softc *ahc,
 189                                             struct ahc_devinfo *devinfo,
 190                                             cam_status status, char *message,
 191                                             int verbose_level);
 192 #ifdef AHC_TARGET_MODE
 193 static void             ahc_setup_target_msgin(struct ahc_softc *ahc,
 194                                                struct ahc_devinfo *devinfo,
 195                                                struct scb *scb);
 196 #endif
 197
 198 static bus_dmamap_callback_t    ahc_dmamap_cb;
 199 static void             ahc_build_free_scb_list(struct ahc_softc *ahc);
 200 static int              ahc_init_scbdata(struct ahc_softc *ahc);
 201 static void             ahc_fini_scbdata(struct ahc_softc *ahc);
 202 static void             ahc_qinfifo_requeue(struct ahc_softc *ahc,
 203                                             struct scb *prev_scb,
 204                                             struct scb *scb);
 205 static int              ahc_qinfifo_count(struct ahc_softc *ahc);
 206 static u_int            ahc_rem_scb_from_disc_list(struct ahc_softc *ahc,
 207                                                    u_int prev, u_int scbptr);
 208 static void             ahc_add_curscb_to_free_list(struct ahc_softc *ahc);
 209 static u_int            ahc_rem_wscb(struct ahc_softc *ahc,
 210                                      u_int scbpos, u_int prev);
 211 static void             ahc_reset_current_bus(struct ahc_softc *ahc);
 212 #ifdef AHC_DUMP_SEQ
 213 static void             ahc_dumpseq(struct ahc_softc *ahc);
 214 #endif
 215 static int              ahc_loadseq(struct ahc_softc *ahc);
 216 static int              ahc_check_patch(struct ahc_softc *ahc,
 217                                         const struct patch **start_patch,
 218                                         u_int start_instr, u_int *skip_addr);
 219 static void             ahc_download_instr(struct ahc_softc *ahc,
 220                                            u_int instrptr, uint8_t *dconsts);
 221 #ifdef AHC_TARGET_MODE
 222 static void             ahc_queue_lstate_event(struct ahc_softc *ahc,
 223                                                struct ahc_tmode_lstate *lstate,
 224                                                u_int initiator_id,
 225                                                u_int event_type,
 226                                                u_int event_arg);
 227 static void             ahc_update_scsiid(struct ahc_softc *ahc,
 228                                           u_int targid_mask);
 229 static int              ahc_handle_target_cmd(struct ahc_softc *ahc,
 230                                               struct target_cmd *cmd);
 231 #endif
 232
 233 static u_int            ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl);
 234 static void             ahc_unbusy_tcl(struct ahc_softc *ahc, u_int tcl);
 235 static void             ahc_busy_tcl(struct ahc_softc *ahc,
 236                                      u_int tcl, u_int busyid);
 237
 238 /************************** SCB and SCB queue management **********************/
 239 static void             ahc_run_untagged_queues(struct ahc_softc *ahc);
 240 static void             ahc_run_untagged_queue(struct ahc_softc *ahc,
 241                                                struct scb_tailq *queue);
 242
 243 /****************************** Initialization ********************************/
 244 static void              ahc_alloc_scbs(struct ahc_softc *ahc);
 245 static void              ahc_shutdown(void *arg);
 246
 247 /*************************** Interrupt Services *******************************/
 248 static void             ahc_clear_intstat(struct ahc_softc *ahc);
 249 static void             ahc_run_qoutfifo(struct ahc_softc *ahc);
 250 #ifdef AHC_TARGET_MODE
 251 static void             ahc_run_tqinfifo(struct ahc_softc *ahc, int paused);
 252 #endif
 253 static void             ahc_handle_brkadrint(struct ahc_softc *ahc);
 254 static void             ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat);
 255 static void             ahc_handle_scsiint(struct ahc_softc *ahc,
 256                                            u_int intstat);
 257 static void             ahc_clear_critical_section(struct ahc_softc *ahc);
 258
 259 /***************************** Error Recovery *********************************/
 260 static void             ahc_freeze_devq(struct ahc_softc *ahc, struct scb *scb);
 261 static int              ahc_abort_scbs(struct ahc_softc *ahc, int target,
 262                                        char channel, int lun, u_int tag,
 263                                        role_t role, uint32_t status);
 264 static void             ahc_calc_residual(struct ahc_softc *ahc,
 265                                           struct scb *scb);
 266
 267 /*********************** Untagged Transaction Routines ************************/
 268 static inline void      ahc_freeze_untagged_queues(struct ahc_softc *ahc);
 269 static inline void      ahc_release_untagged_queues(struct ahc_softc *ahc);
 270
 271 /*
 272  * Block our completion routine from starting the next untagged
 273  * transaction for this target or target lun.
 274  */
 275 static inline void
 276 ahc_freeze_untagged_queues(struct ahc_softc *ahc)
 277 {
 278         if ((ahc->flags & AHC_SCB_BTT) == 0)
 279                 ahc->untagged_queue_lock++;
 280 }
 281
 282 /*
 283  * Allow the next untagged transaction for this target or target lun
 284  * to be executed.  We use a counting semaphore to allow the lock
 285  * to be acquired recursively.  Once the count drops to zero, the
 286  * transaction queues will be run.
 287  */
 288 static inline void
 289 ahc_release_untagged_queues(struct ahc_softc *ahc)
 290 {
 291         if ((ahc->flags & AHC_SCB_BTT) == 0) {
 292                 ahc->untagged_queue_lock--;
 293                 if (ahc->untagged_queue_lock == 0)
 294                         ahc_run_untagged_queues(ahc);
 295         }
 296 }
 297
 298 /************************* Sequencer Execution Control ************************/
 299 /*
 300  * Work around any chip bugs related to halting sequencer execution.
 301  * On Ultra2 controllers, we must clear the CIOBUS stretch signal by
 302  * reading a register that will set this signal and deassert it.
 303  * Without this workaround, if the chip is paused, by an interrupt or
 304  * manual pause while accessing scb ram, accesses to certain registers
 305  * will hang the system (infinite pci retries).
 306  */
 307 static void
 308 ahc_pause_bug_fix(struct ahc_softc *ahc)
 309 {
 310         if ((ahc->features & AHC_ULTRA2) != 0)
 311                 (void)ahc_inb(ahc, CCSCBCTL);
 312 }
 313
 314 /*
 315  * Determine whether the sequencer has halted code execution.
 316  * Returns non-zero status if the sequencer is stopped.
 317  */
 318 int
 319 ahc_is_paused(struct ahc_softc *ahc)
 320 {
 321         return ((ahc_inb(ahc, HCNTRL) & PAUSE) != 0);
 322 }
 323
 324 /*
 325  * Request that the sequencer stop and wait, indefinitely, for it
 326  * to stop.  The sequencer will only acknowledge that it is paused
 327  * once it has reached an instruction boundary and PAUSEDIS is
 328  * cleared in the SEQCTL register.  The sequencer may use PAUSEDIS
 329  * for critical sections.
 330  */
 331 void
 332 ahc_pause(struct ahc_softc *ahc)
 333 {
 334         ahc_outb(ahc, HCNTRL, ahc->pause);
 335
 336         /*
 337          * Since the sequencer can disable pausing in a critical section, we
 338          * must loop until it actually stops.
 339          */
 340         while (ahc_is_paused(ahc) == 0)
 341                 ;
 342
 343         ahc_pause_bug_fix(ahc);
 344 }
 345
 346 /*
 347  * Allow the sequencer to continue program execution.
 348  * We check here to ensure that no additional interrupt
 349  * sources that would cause the sequencer to halt have been
 350  * asserted.  If, for example, a SCSI bus reset is detected
 351  * while we are fielding a different, pausing, interrupt type,
 352  * we don't want to release the sequencer before going back
 353  * into our interrupt handler and dealing with this new
 354  * condition.
 355  */
 356 void
 357 ahc_unpause(struct ahc_softc *ahc)
 358 {
 359         if ((ahc_inb(ahc, INTSTAT) & (SCSIINT | SEQINT | BRKADRINT)) == 0)
 360                 ahc_outb(ahc, HCNTRL, ahc->unpause);
 361 }
 362
 363 /************************** Memory mapping routines ***************************/
 364 static struct ahc_dma_seg *
 365 ahc_sg_bus_to_virt(struct scb *scb, uint32_t sg_busaddr)
 366 {
 367         int sg_index;
 368
 369         sg_index = (sg_busaddr - scb->sg_list_phys)/sizeof(struct ahc_dma_seg);
 370         /* sg_list_phys points to entry 1, not 0 */
 371         sg_index++;
 372
 373         return (&scb->sg_list[sg_index]);
 374 }
 375
 376 static uint32_t
 377 ahc_sg_virt_to_bus(struct scb *scb, struct ahc_dma_seg *sg)
 378 {
 379         int sg_index;
 380
 381         /* sg_list_phys points to entry 1, not 0 */
 382         sg_index = sg - &scb->sg_list[1];
 383
 384         return (scb->sg_list_phys + (sg_index * sizeof(*scb->sg_list)));
 385 }
 386
 387 static uint32_t
 388 ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index)
 389 {
 390         return (ahc->scb_data->hscb_busaddr
 391                 + (sizeof(struct hardware_scb) * index));
 392 }
 393
 394 static void
 395 ahc_sync_scb(struct ahc_softc *ahc, struct scb *scb, int op)
 396 {
 397         ahc_dmamap_sync(ahc, ahc->scb_data->hscb_dmat,
 398                         ahc->scb_data->hscb_dmamap,
 399                         /*offset*/(scb->hscb - ahc->hscbs) * sizeof(*scb->hscb),
 400                         /*len*/sizeof(*scb->hscb), op);
 401 }
 402
 403 void
 404 ahc_sync_sglist(struct ahc_softc *ahc, struct scb *scb, int op)
 405 {
 406         if (scb->sg_count == 0)
 407                 return;
 408
 409         ahc_dmamap_sync(ahc, ahc->scb_data->sg_dmat, scb->sg_map->sg_dmamap,
 410                         /*offset*/(scb->sg_list - scb->sg_map->sg_vaddr)
 411                                 * sizeof(struct ahc_dma_seg),
 412                         /*len*/sizeof(struct ahc_dma_seg) * scb->sg_count, op);
 413 }
 414
 415 #ifdef AHC_TARGET_MODE
 416 static uint32_t
 417 ahc_targetcmd_offset(struct ahc_softc *ahc, u_int index)
 418 {
 419         return (((uint8_t *)&ahc->targetcmds[index]) - ahc->qoutfifo);
 420 }
 421 #endif
 422
 423 /*********************** Miscellaneous Support Functions ***********************/
 424 /*
 425  * Determine whether the sequencer reported a residual
 426  * for this SCB/transaction.
 427  */
 428 static void
 429 ahc_update_residual(struct ahc_softc *ahc, struct scb *scb)
 430 {
 431         uint32_t sgptr;
 432
 433         sgptr = ahc_le32toh(scb->hscb->sgptr);
 434         if ((sgptr & SG_RESID_VALID) != 0)
 435                 ahc_calc_residual(ahc, scb);
 436 }
 437
 438 /*
 439  * Return pointers to the transfer negotiation information
 440  * for the specified our_id/remote_id pair.
 441  */
 442 struct ahc_initiator_tinfo *
 443 ahc_fetch_transinfo(struct ahc_softc *ahc, char channel, u_int our_id,
 444                     u_int remote_id, struct ahc_tmode_tstate **tstate)
 445 {
 446         /*
 447          * Transfer data structures are stored from the perspective
 448          * of the target role.  Since the parameters for a connection
 449          * in the initiator role to a given target are the same as
 450          * when the roles are reversed, we pretend we are the target.
 451          */
 452         if (channel == 'B')
 453                 our_id += 8;
 454         *tstate = ahc->enabled_targets[our_id];
 455         return (&(*tstate)->transinfo[remote_id]);
 456 }
 457
 458 uint16_t
 459 ahc_inw(struct ahc_softc *ahc, u_int port)
 460 {
 461         uint16_t r = ahc_inb(ahc, port+1) << 8;
 462         return r | ahc_inb(ahc, port);
 463 }
 464
 465 void
 466 ahc_outw(struct ahc_softc *ahc, u_int port, u_int value)
 467 {
 468         ahc_outb(ahc, port, value & 0xFF);
 469         ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
 470 }
 471
 472 uint32_t
 473 ahc_inl(struct ahc_softc *ahc, u_int port)
 474 {
 475         return ((ahc_inb(ahc, port))
 476               | (ahc_inb(ahc, port+1) << 8)
 477               | (ahc_inb(ahc, port+2) << 16)
 478               | (ahc_inb(ahc, port+3) << 24));
 479 }
 480
 481 void
 482 ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value)
 483 {
 484         ahc_outb(ahc, port, (value) & 0xFF);
 485         ahc_outb(ahc, port+1, ((value) >> 8) & 0xFF);
 486         ahc_outb(ahc, port+2, ((value) >> 16) & 0xFF);
 487         ahc_outb(ahc, port+3, ((value) >> 24) & 0xFF);
 488 }
 489
 490 uint64_t
 491 ahc_inq(struct ahc_softc *ahc, u_int port)
 492 {
 493         return ((ahc_inb(ahc, port))
 494               | (ahc_inb(ahc, port+1) << 8)
 495               | (ahc_inb(ahc, port+2) << 16)
 496               | (ahc_inb(ahc, port+3) << 24)
 497               | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
 498               | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
 499               | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
 500               | (((uint64_t)ahc_inb(ahc, port+7)) << 56));
 501 }
 502
 503 void
 504 ahc_outq(struct ahc_softc *ahc, u_int port, uint64_t value)
 505 {
 506         ahc_outb(ahc, port, value & 0xFF);
 507         ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
 508         ahc_outb(ahc, port+2, (value >> 16) & 0xFF);
 509         ahc_outb(ahc, port+3, (value >> 24) & 0xFF);
 510         ahc_outb(ahc, port+4, (value >> 32) & 0xFF);
 511         ahc_outb(ahc, port+5, (value >> 40) & 0xFF);
 512         ahc_outb(ahc, port+6, (value >> 48) & 0xFF);
 513         ahc_outb(ahc, port+7, (value >> 56) & 0xFF);
 514 }
 515
 516 /*
 517  * Get a free scb. If there are none, see if we can allocate a new SCB.
 518  */
 519 struct scb *
 520 ahc_get_scb(struct ahc_softc *ahc)
 521 {
 522         struct scb *scb;
 523
 524         if ((scb = SLIST_FIRST(&ahc->scb_data->free_scbs)) == NULL) {
 525                 ahc_alloc_scbs(ahc);
 526                 scb = SLIST_FIRST(&ahc->scb_data->free_scbs);
 527                 if (scb == NULL)
 528                         return (NULL);
 529         }
 530         SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
 531         return (scb);
 532 }
 533
 534 /*
 535  * Return an SCB resource to the free list.
 536  */
 537 void
 538 ahc_free_scb(struct ahc_softc *ahc, struct scb *scb)
 539 {
 540         struct hardware_scb *hscb;
 541
 542         hscb = scb->hscb;
 543         /* Clean up for the next user */
 544         ahc->scb_data->scbindex[hscb->tag] = NULL;
 545         scb->flags = SCB_FREE;
 546         hscb->control = 0;
 547
 548         SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle);
 549
 550         /* Notify the OSM that a resource is now available. */
 551         ahc_platform_scb_free(ahc, scb);
 552 }
 553
 554 struct scb *
 555 ahc_lookup_scb(struct ahc_softc *ahc, u_int tag)
 556 {
 557         struct scb* scb;
 558
 559         scb = ahc->scb_data->scbindex[tag];
 560         if (scb != NULL)
 561                 ahc_sync_scb(ahc, scb,
 562                              BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
 563         return (scb);
 564 }
 565
 566 static void
 567 ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb)
 568 {
 569         struct hardware_scb *q_hscb;
 570         u_int  saved_tag;
 571
 572         /*
 573          * Our queuing method is a bit tricky.  The card
 574          * knows in advance which HSCB to download, and we
 575          * can't disappoint it.  To achieve this, the next
 576          * SCB to download is saved off in ahc->next_queued_scb.
 577          * When we are called to queue "an arbitrary scb",
 578          * we copy the contents of the incoming HSCB to the one
 579          * the sequencer knows about, swap HSCB pointers and
 580          * finally assign the SCB to the tag indexed location
 581          * in the scb_array.  This makes sure that we can still
 582          * locate the correct SCB by SCB_TAG.
 583          */
 584         q_hscb = ahc->next_queued_scb->hscb;
 585         saved_tag = q_hscb->tag;
 586         memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
 587         if ((scb->flags & SCB_CDB32_PTR) != 0) {
 588                 q_hscb->shared_data.cdb_ptr =
 589                     ahc_htole32(ahc_hscb_busaddr(ahc, q_hscb->tag)
 590                               + offsetof(struct hardware_scb, cdb32));
 591         }
 592         q_hscb->tag = saved_tag;
 593         q_hscb->next = scb->hscb->tag;
 594
 595         /* Now swap HSCB pointers. */
 596         ahc->next_queued_scb->hscb = scb->hscb;
 597         scb->hscb = q_hscb;
 598
 599         /* Now define the mapping from tag to SCB in the scbindex */
 600         ahc->scb_data->scbindex[scb->hscb->tag] = scb;
 601 }
 602
 603 /*
 604  * Tell the sequencer about a new transaction to execute.
 605  */
 606 void
 607 ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb)
 608 {
 609         ahc_swap_with_next_hscb(ahc, scb);
 610
 611         if (scb->hscb->tag == SCB_LIST_NULL
 612          || scb->hscb->next == SCB_LIST_NULL)
 613                 panic("Attempt to queue invalid SCB tag %x:%x\n",
 614                       scb->hscb->tag, scb->hscb->next);
 615
 616         /*
 617          * Setup data "oddness".
 618          */
 619         scb->hscb->lun &= LID;
 620         if (ahc_get_transfer_length(scb) & 0x1)
 621                 scb->hscb->lun |= SCB_XFERLEN_ODD;
 622
 623         /*
 624          * Keep a history of SCBs we've downloaded in the qinfifo.
 625          */
 626         ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
 627
 628         /*
 629          * Make sure our data is consistent from the
 630          * perspective of the adapter.
 631          */
 632         ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
 633
 634         /* Tell the adapter about the newly queued SCB */
 635         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
 636                 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
 637         } else {
 638                 if ((ahc->features & AHC_AUTOPAUSE) == 0)
 639                         ahc_pause(ahc);
 640                 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
 641                 if ((ahc->features & AHC_AUTOPAUSE) == 0)
 642                         ahc_unpause(ahc);
 643         }
 644 }
 645
 646 struct scsi_sense_data *
 647 ahc_get_sense_buf(struct ahc_softc *ahc, struct scb *scb)
 648 {
 649         int offset;
 650
 651         offset = scb - ahc->scb_data->scbarray;
 652         return (&ahc->scb_data->sense[offset]);
 653 }
 654
 655 static uint32_t
 656 ahc_get_sense_bufaddr(struct ahc_softc *ahc, struct scb *scb)
 657 {
 658         int offset;
 659
 660         offset = scb - ahc->scb_data->scbarray;
 661         return (ahc->scb_data->sense_busaddr
 662               + (offset * sizeof(struct scsi_sense_data)));
 663 }
 664
 665 /************************** Interrupt Processing ******************************/
 666 static void
 667 ahc_sync_qoutfifo(struct ahc_softc *ahc, int op)
 668 {
 669         ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
 670                         /*offset*/0, /*len*/256, op);
 671 }
 672
 673 static void
 674 ahc_sync_tqinfifo(struct ahc_softc *ahc, int op)
 675 {
 676 #ifdef AHC_TARGET_MODE
 677         if ((ahc->flags & AHC_TARGETROLE) != 0) {
 678                 ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
 679                                 ahc->shared_data_dmamap,
 680                                 ahc_targetcmd_offset(ahc, 0),
 681                                 sizeof(struct target_cmd) * AHC_TMODE_CMDS,
 682                                 op);
 683         }
 684 #endif
 685 }
 686
 687 /*
 688  * See if the firmware has posted any completed commands
 689  * into our in-core command complete fifos.
 690  */
 691 #define AHC_RUN_QOUTFIFO 0x1
 692 #define AHC_RUN_TQINFIFO 0x2
 693 static u_int
 694 ahc_check_cmdcmpltqueues(struct ahc_softc *ahc)
 695 {
 696         u_int retval;
 697
 698         retval = 0;
 699         ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
 700                         /*offset*/ahc->qoutfifonext, /*len*/1,
 701                         BUS_DMASYNC_POSTREAD);
 702         if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL)
 703                 retval |= AHC_RUN_QOUTFIFO;
 704 #ifdef AHC_TARGET_MODE
 705         if ((ahc->flags & AHC_TARGETROLE) != 0
 706          && (ahc->flags & AHC_TQINFIFO_BLOCKED) == 0) {
 707                 ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
 708                                 ahc->shared_data_dmamap,
 709                                 ahc_targetcmd_offset(ahc, ahc->tqinfifofnext),
 710                                 /*len*/sizeof(struct target_cmd),
 711                                 BUS_DMASYNC_POSTREAD);
 712                 if (ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0)
 713                         retval |= AHC_RUN_TQINFIFO;
 714         }
 715 #endif
 716         return (retval);
 717 }
 718
 719 /*
 720  * Catch an interrupt from the adapter
 721  */
 722 int
 723 ahc_intr(struct ahc_softc *ahc)
 724 {
 725         u_int   intstat;
 726
 727         if ((ahc->pause & INTEN) == 0) {
 728                 /*
 729                  * Our interrupt is not enabled on the chip
 730                  * and may be disabled for re-entrancy reasons,
 731                  * so just return.  This is likely just a shared
 732                  * interrupt.
 733                  */
 734                 return (0);
 735         }
 736         /*
 737          * Instead of directly reading the interrupt status register,
 738          * infer the cause of the interrupt by checking our in-core
 739          * completion queues.  This avoids a costly PCI bus read in
 740          * most cases.
 741          */
 742         if ((ahc->flags & (AHC_ALL_INTERRUPTS|AHC_EDGE_INTERRUPT)) == 0
 743          && (ahc_check_cmdcmpltqueues(ahc) != 0))
 744                 intstat = CMDCMPLT;
 745         else {
 746                 intstat = ahc_inb(ahc, INTSTAT);
 747         }
 748
 749         if ((intstat & INT_PEND) == 0) {
 750 #if AHC_PCI_CONFIG > 0
 751                 if (ahc->unsolicited_ints > 500) {
 752                         ahc->unsolicited_ints = 0;
 753                         if ((ahc->chip & AHC_PCI) != 0
 754                          && (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0)
 755                                 ahc->bus_intr(ahc);
 756                 }
 757 #endif
 758                 ahc->unsolicited_ints++;
 759                 return (0);
 760         }
 761         ahc->unsolicited_ints = 0;
 762
 763         if (intstat & CMDCMPLT) {
 764                 ahc_outb(ahc, CLRINT, CLRCMDINT);
 765
 766                 /*
 767                  * Ensure that the chip sees that we've cleared
 768                  * this interrupt before we walk the output fifo.
 769                  * Otherwise, we may, due to posted bus writes,
 770                  * clear the interrupt after we finish the scan,
 771                  * and after the sequencer has added new entries
 772                  * and asserted the interrupt again.
 773                  */
 774                 ahc_flush_device_writes(ahc);
 775                 ahc_run_qoutfifo(ahc);
 776 #ifdef AHC_TARGET_MODE
 777                 if ((ahc->flags & AHC_TARGETROLE) != 0)
 778                         ahc_run_tqinfifo(ahc, /*paused*/FALSE);
 779 #endif
 780         }
 781
 782         /*
 783          * Handle statuses that may invalidate our cached
 784          * copy of INTSTAT separately.
 785          */
 786         if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) {
 787                 /* Hot eject.  Do nothing */
 788         } else if (intstat & BRKADRINT) {
 789                 ahc_handle_brkadrint(ahc);
 790         } else if ((intstat & (SEQINT|SCSIINT)) != 0) {
 791
 792                 ahc_pause_bug_fix(ahc);
 793
 794                 if ((intstat & SEQINT) != 0)
 795                         ahc_handle_seqint(ahc, intstat);
 796
 797                 if ((intstat & SCSIINT) != 0)
 798                         ahc_handle_scsiint(ahc, intstat);
 799         }
 800         return (1);
 801 }
 802
 803 /************************* Sequencer Execution Control ************************/
 804 /*
 805  * Restart the sequencer program from address zero
 806  */
 807 static void
 808 ahc_restart(struct ahc_softc *ahc)
 809 {
 810         uint8_t sblkctl;
 811
 812         ahc_pause(ahc);
 813
 814         /* No more pending messages. */
 815         ahc_clear_msg_state(ahc);
 816
 817         ahc_outb(ahc, SCSISIGO, 0);             /* De-assert BSY */
 818         ahc_outb(ahc, MSG_OUT, MSG_NOOP);       /* No message to send */
 819         ahc_outb(ahc, SXFRCTL1, ahc_inb(ahc, SXFRCTL1) & ~BITBUCKET);
 820         ahc_outb(ahc, LASTPHASE, P_BUSFREE);
 821         ahc_outb(ahc, SAVED_SCSIID, 0xFF);
 822         ahc_outb(ahc, SAVED_LUN, 0xFF);
 823
 824         /*
 825          * Ensure that the sequencer's idea of TQINPOS
 826          * matches our own.  The sequencer increments TQINPOS
 827          * only after it sees a DMA complete and a reset could
 828          * occur before the increment leaving the kernel to believe
 829          * the command arrived but the sequencer to not.
 830          */
 831         ahc_outb(ahc, TQINPOS, ahc->tqinfifonext);
 832
 833         /* Always allow reselection */
 834         ahc_outb(ahc, SCSISEQ,
 835                  ahc_inb(ahc, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP));
 836         if ((ahc->features & AHC_CMD_CHAN) != 0) {
 837                 /* Ensure that no DMA operations are in progress */
 838                 ahc_outb(ahc, CCSCBCNT, 0);
 839                 ahc_outb(ahc, CCSGCTL, 0);
 840                 ahc_outb(ahc, CCSCBCTL, 0);
 841         }
 842         /*
 843          * If we were in the process of DMA'ing SCB data into
 844          * an SCB, replace that SCB on the free list.  This prevents
 845          * an SCB leak.
 846          */
 847         if ((ahc_inb(ahc, SEQ_FLAGS2) & SCB_DMA) != 0) {
 848                 ahc_add_curscb_to_free_list(ahc);
 849                 ahc_outb(ahc, SEQ_FLAGS2,
 850                          ahc_inb(ahc, SEQ_FLAGS2) & ~SCB_DMA);
 851         }
 852
 853         /*
 854          * Clear any pending sequencer interrupt.  It is no
 855          * longer relevant since we're resetting the Program
 856          * Counter.
 857          */
 858         ahc_outb(ahc, CLRINT, CLRSEQINT);
 859
 860         ahc_outb(ahc, MWI_RESIDUAL, 0);
 861         ahc_outb(ahc, SEQCTL, ahc->seqctl);
 862         ahc_outb(ahc, SEQADDR0, 0);
 863         ahc_outb(ahc, SEQADDR1, 0);
 864
 865         /*
 866          * Take the LED out of diagnostic mode on PM resume, too
 867          */
 868         sblkctl = ahc_inb(ahc, SBLKCTL);
 869         ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON)));
 870
 871         ahc_unpause(ahc);
 872 }
 873
 874 /************************* Input/Output Queues ********************************/
 875 static void
 876 ahc_run_qoutfifo(struct ahc_softc *ahc)
 877 {
 878         struct scb *scb;
 879         u_int  scb_index;
 880
 881         ahc_sync_qoutfifo(ahc, BUS_DMASYNC_POSTREAD);
 882         while (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL) {
 883
 884                 scb_index = ahc->qoutfifo[ahc->qoutfifonext];
 885                 if ((ahc->qoutfifonext & 0x03) == 0x03) {
 886                         u_int modnext;
 887
 888                         /*
 889                          * Clear 32bits of QOUTFIFO at a time
 890                          * so that we don't clobber an incoming
 891                          * byte DMA to the array on architectures
 892                          * that only support 32bit load and store
 893                          * operations.
 894                          */
 895                         modnext = ahc->qoutfifonext & ~0x3;
 896                         *((uint32_t *)(&ahc->qoutfifo[modnext])) = 0xFFFFFFFFUL;
 897                         ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
 898                                         ahc->shared_data_dmamap,
 899                                         /*offset*/modnext, /*len*/4,
 900                                         BUS_DMASYNC_PREREAD);
 901                 }
 902                 ahc->qoutfifonext++;
 903
 904                 scb = ahc_lookup_scb(ahc, scb_index);
 905                 if (scb == NULL) {
 906                         printk("%s: WARNING no command for scb %d "
 907                                "(cmdcmplt)\nQOUTPOS = %d\n",
 908                                ahc_name(ahc), scb_index,
 909                                (ahc->qoutfifonext - 1) & 0xFF);
 910                         continue;
 911                 }
 912
 913                 /*
 914                  * Save off the residual
 915                  * if there is one.
 916                  */
 917                 ahc_update_residual(ahc, scb);
 918                 ahc_done(ahc, scb);
 919         }
 920 }
 921
 922 static void
 923 ahc_run_untagged_queues(struct ahc_softc *ahc)
 924 {
 925         int i;
 926
 927         for (i = 0; i < 16; i++)
 928                 ahc_run_untagged_queue(ahc, &ahc->untagged_queues[i]);
 929 }
 930
 931 static void
 932 ahc_run_untagged_queue(struct ahc_softc *ahc, struct scb_tailq *queue)
 933 {
 934         struct scb *scb;
 935
 936         if (ahc->untagged_queue_lock != 0)
 937                 return;
 938
 939         if ((scb = TAILQ_FIRST(queue)) != NULL
 940          && (scb->flags & SCB_ACTIVE) == 0) {
 941                 scb->flags |= SCB_ACTIVE;
 942                 ahc_queue_scb(ahc, scb);
 943         }
 944 }
 945
 946 /************************* Interrupt Handling *********************************/
 947 static void
 948 ahc_handle_brkadrint(struct ahc_softc *ahc)
 949 {
 950         /*
 951          * We upset the sequencer :-(
 952          * Lookup the error message
 953          */
 954         int i;
 955         int error;
 956
 957         error = ahc_inb(ahc, ERROR);
 958         for (i = 0; error != 1 && i < num_errors; i++)
 959                 error >>= 1;
 960         printk("%s: brkadrint, %s at seqaddr = 0x%x\n",
 961                ahc_name(ahc), ahc_hard_errors[i].errmesg,
 962                ahc_inb(ahc, SEQADDR0) |
 963                (ahc_inb(ahc, SEQADDR1) << 8));
 964
 965         ahc_dump_card_state(ahc);
 966
 967         /* Tell everyone that this HBA is no longer available */
 968         ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, ALL_CHANNELS,
 969                        CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN,
 970                        CAM_NO_HBA);
 971
 972         /* Disable all interrupt sources by resetting the controller */
 973         ahc_shutdown(ahc);
 974 }
 975
 976 static void
 977 ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat)
 978 {
 979         struct scb *scb;
 980         struct ahc_devinfo devinfo;
 981
 982         ahc_fetch_devinfo(ahc, &devinfo);
 983
 984         /*
 985          * Clear the upper byte that holds SEQINT status
 986          * codes and clear the SEQINT bit. We will unpause
 987          * the sequencer, if appropriate, after servicing
 988          * the request.
 989          */
 990         ahc_outb(ahc, CLRINT, CLRSEQINT);
 991         switch (intstat & SEQINT_MASK) {
 992         case BAD_STATUS:
 993         {
 994                 u_int  scb_index;
 995                 struct hardware_scb *hscb;
 996
 997                 /*
 998                  * Set the default return value to 0 (don't
 999                  * send sense).  The sense code will change
1000                  * this if needed.
1001                  */
1002                 ahc_outb(ahc, RETURN_1, 0);
1003
1004                 /*
1005                  * The sequencer will notify us when a command
1006                  * has an error that would be of interest to
1007                  * the kernel.  This allows us to leave the sequencer
1008                  * running in the common case of command completes
1009                  * without error.  The sequencer will already have
1010                  * dma'd the SCB back up to us, so we can reference
1011                  * the in kernel copy directly.
1012                  */
1013                 scb_index = ahc_inb(ahc, SCB_TAG);
1014                 scb = ahc_lookup_scb(ahc, scb_index);
1015                 if (scb == NULL) {
1016                         ahc_print_devinfo(ahc, &devinfo);
1017                         printk("ahc_intr - referenced scb "
1018                                "not valid during seqint 0x%x scb(%d)\n",
1019                                intstat, scb_index);
1020                         ahc_dump_card_state(ahc);
1021                         panic("for safety");
1022                         goto unpause;
1023                 }
1024
1025                 hscb = scb->hscb;
1026
1027                 /* Don't want to clobber the original sense code */
1028                 if ((scb->flags & SCB_SENSE) != 0) {
1029                         /*
1030                          * Clear the SCB_SENSE Flag and have
1031                          * the sequencer do a normal command
1032                          * complete.
1033                          */
1034                         scb->flags &= ~SCB_SENSE;
1035                         ahc_set_transaction_status(scb, CAM_AUTOSENSE_FAIL);
1036                         break;
1037                 }
1038                 ahc_set_transaction_status(scb, CAM_SCSI_STATUS_ERROR);
1039                 /* Freeze the queue until the client sees the error. */
1040                 ahc_freeze_devq(ahc, scb);
1041                 ahc_freeze_scb(scb);
1042                 ahc_set_scsi_status(scb, hscb->shared_data.status.scsi_status);
1043                 switch (hscb->shared_data.status.scsi_status) {
1044                 case SCSI_STATUS_OK:
1045                         printk("%s: Interrupted for status of 0???\n",
1046                                ahc_name(ahc));
1047                         break;
1048                 case SCSI_STATUS_CMD_TERMINATED:
1049                 case SCSI_STATUS_CHECK_COND:
1050                 {
1051                         struct ahc_dma_seg *sg;
1052                         struct scsi_sense *sc;
1053                         struct ahc_initiator_tinfo *targ_info;
1054                         struct ahc_tmode_tstate *tstate;
1055                         struct ahc_transinfo *tinfo;
1056 #ifdef AHC_DEBUG
1057                         if (ahc_debug & AHC_SHOW_SENSE) {
1058                                 ahc_print_path(ahc, scb);
1059                                 printk("SCB %d: requests Check Status\n",
1060                                        scb->hscb->tag);
1061                         }
1062 #endif
1063
1064                         if (ahc_perform_autosense(scb) == 0)
1065                                 break;
1066
1067                         targ_info = ahc_fetch_transinfo(ahc,
1068                                                         devinfo.channel,
1069                                                         devinfo.our_scsiid,
1070                                                         devinfo.target,
1071                                                         &tstate);
1072                         tinfo = &targ_info->curr;
1073                         sg = scb->sg_list;
1074                         sc = (struct scsi_sense *)(&hscb->shared_data.cdb);
1075                         /*
1076                          * Save off the residual if there is one.
1077                          */
1078                         ahc_update_residual(ahc, scb);
1079 #ifdef AHC_DEBUG
1080                         if (ahc_debug & AHC_SHOW_SENSE) {
1081                                 ahc_print_path(ahc, scb);
1082                                 printk("Sending Sense\n");
1083                         }
1084 #endif
1085                         sg->addr = ahc_get_sense_bufaddr(ahc, scb);
1086                         sg->len = ahc_get_sense_bufsize(ahc, scb);
1087                         sg->len |= AHC_DMA_LAST_SEG;
1088
1089                         /* Fixup byte order */
1090                         sg->addr = ahc_htole32(sg->addr);
1091                         sg->len = ahc_htole32(sg->len);
1092
1093                         sc->opcode = REQUEST_SENSE;
1094                         sc->byte2 = 0;
1095                         if (tinfo->protocol_version <= SCSI_REV_2
1096                          && SCB_GET_LUN(scb) < 8)
1097                                 sc->byte2 = SCB_GET_LUN(scb) << 5;
1098                         sc->unused[0] = 0;
1099                         sc->unused[1] = 0;
1100                         sc->length = sg->len;
1101                         sc->control = 0;
1102
1103                         /*
1104                          * We can't allow the target to disconnect.
1105                          * This will be an untagged transaction and
1106                          * having the target disconnect will make this
1107                          * transaction indestinguishable from outstanding
1108                          * tagged transactions.
1109                          */
1110                         hscb->control = 0;
1111
1112                         /*
1113                          * This request sense could be because the
1114                          * the device lost power or in some other
1115                          * way has lost our transfer negotiations.
1116                          * Renegotiate if appropriate.  Unit attention
1117                          * errors will be reported before any data
1118                          * phases occur.
1119                          */
1120                         if (ahc_get_residual(scb)
1121                          == ahc_get_transfer_length(scb)) {
1122                                 ahc_update_neg_request(ahc, &devinfo,
1123                                                        tstate, targ_info,
1124                                                        AHC_NEG_IF_NON_ASYNC);
1125                         }
1126                         if (tstate->auto_negotiate & devinfo.target_mask) {
1127                                 hscb->control |= MK_MESSAGE;
1128                                 scb->flags &= ~SCB_NEGOTIATE;
1129                                 scb->flags |= SCB_AUTO_NEGOTIATE;
1130                         }
1131                         hscb->cdb_len = sizeof(*sc);
1132                         hscb->dataptr = sg->addr;
1133                         hscb->datacnt = sg->len;
1134                         hscb->sgptr = scb->sg_list_phys | SG_FULL_RESID;
1135                         hscb->sgptr = ahc_htole32(hscb->sgptr);
1136                         scb->sg_count = 1;
1137                         scb->flags |= SCB_SENSE;
1138                         ahc_qinfifo_requeue_tail(ahc, scb);
1139                         ahc_outb(ahc, RETURN_1, SEND_SENSE);
1140                         /*
1141                          * Ensure we have enough time to actually
1142                          * retrieve the sense.
1143                          */
1144                         ahc_scb_timer_reset(scb, 5 * 1000000);
1145                         break;
1146                 }
1147                 default:
1148                         break;
1149                 }
1150                 break;
1151         }
1152         case NO_MATCH:
1153         {
1154                 /* Ensure we don't leave the selection hardware on */
1155                 ahc_outb(ahc, SCSISEQ,
1156                          ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP));
1157
1158                 printk("%s:%c:%d: no active SCB for reconnecting "
1159                        "target - issuing BUS DEVICE RESET\n",
1160                        ahc_name(ahc), devinfo.channel, devinfo.target);
1161                 printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
1162                        "ARG_1 == 0x%x ACCUM = 0x%x\n",
1163                        ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN),
1164                        ahc_inb(ahc, ARG_1), ahc_inb(ahc, ACCUM));
1165                 printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
1166                        "SINDEX == 0x%x\n",
1167                        ahc_inb(ahc, SEQ_FLAGS), ahc_inb(ahc, SCBPTR),
1168                        ahc_index_busy_tcl(ahc,
1169                             BUILD_TCL(ahc_inb(ahc, SAVED_SCSIID),
1170                                       ahc_inb(ahc, SAVED_LUN))),
1171                        ahc_inb(ahc, SINDEX));
1172                 printk("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
1173                        "SCB_TAG == 0x%x, SCB_CONTROL == 0x%x\n",
1174                        ahc_inb(ahc, SCSIID), ahc_inb(ahc, SCB_SCSIID),
1175                        ahc_inb(ahc, SCB_LUN), ahc_inb(ahc, SCB_TAG),
1176                        ahc_inb(ahc, SCB_CONTROL));
1177                 printk("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n",
1178                        ahc_inb(ahc, SCSIBUSL), ahc_inb(ahc, SCSISIGI));
1179                 printk("SXFRCTL0 == 0x%x\n", ahc_inb(ahc, SXFRCTL0));
1180                 printk("SEQCTL == 0x%x\n", ahc_inb(ahc, SEQCTL));
1181                 ahc_dump_card_state(ahc);
1182                 ahc->msgout_buf[0] = MSG_BUS_DEV_RESET;
1183                 ahc->msgout_len = 1;
1184                 ahc->msgout_index = 0;
1185                 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
1186                 ahc_outb(ahc, MSG_OUT, HOST_MSG);
1187                 ahc_assert_atn(ahc);
1188                 break;
1189         }
1190         case SEND_REJECT:
1191         {
1192                 u_int rejbyte = ahc_inb(ahc, ACCUM);
1193                 printk("%s:%c:%d: Warning - unknown message received from "
1194                        "target (0x%x).  Rejecting\n",
1195                        ahc_name(ahc), devinfo.channel, devinfo.target, rejbyte);
1196                 break;
1197         }
1198         case PROTO_VIOLATION:
1199         {
1200                 ahc_handle_proto_violation(ahc);
1201                 break;
1202         }
1203         case IGN_WIDE_RES:
1204                 ahc_handle_ign_wide_residue(ahc, &devinfo);
1205                 break;
1206         case PDATA_REINIT:
1207                 ahc_reinitialize_dataptrs(ahc);
1208                 break;
1209         case BAD_PHASE:
1210         {
1211                 u_int lastphase;
1212
1213                 lastphase = ahc_inb(ahc, LASTPHASE);
1214                 printk("%s:%c:%d: unknown scsi bus phase %x, "
1215                        "lastphase = 0x%x.  Attempting to continue\n",
1216                        ahc_name(ahc), devinfo.channel, devinfo.target,
1217                        lastphase, ahc_inb(ahc, SCSISIGI));
1218                 break;
1219         }
1220         case MISSED_BUSFREE:
1221         {
1222                 u_int lastphase;
1223
1224                 lastphase = ahc_inb(ahc, LASTPHASE);
1225                 printk("%s:%c:%d: Missed busfree. "
1226                        "Lastphase = 0x%x, Curphase = 0x%x\n",
1227                        ahc_name(ahc), devinfo.channel, devinfo.target,
1228                        lastphase, ahc_inb(ahc, SCSISIGI));
1229                 ahc_restart(ahc);
1230                 return;
1231         }
1232         case HOST_MSG_LOOP:
1233         {
1234                 /*
1235                  * The sequencer has encountered a message phase
1236                  * that requires host assistance for completion.
1237                  * While handling the message phase(s), we will be
1238                  * notified by the sequencer after each byte is
1239                  * transferred so we can track bus phase changes.
1240                  *
1241                  * If this is the first time we've seen a HOST_MSG_LOOP
1242                  * interrupt, initialize the state of the host message
1243                  * loop.
1244                  */
1245                 if (ahc->msg_type == MSG_TYPE_NONE) {
1246                         struct scb *scb;
1247                         u_int scb_index;
1248                         u_int bus_phase;
1249
1250                         bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
1251                         if (bus_phase != P_MESGIN
1252                          && bus_phase != P_MESGOUT) {
1253                                 printk("ahc_intr: HOST_MSG_LOOP bad "
1254                                        "phase 0x%x\n",
1255                                       bus_phase);
1256                                 /*
1257                                  * Probably transitioned to bus free before
1258                                  * we got here.  Just punt the message.
1259                                  */
1260                                 ahc_clear_intstat(ahc);
1261                                 ahc_restart(ahc);
1262                                 return;
1263                         }
1264
1265                         scb_index = ahc_inb(ahc, SCB_TAG);
1266                         scb = ahc_lookup_scb(ahc, scb_index);
1267                         if (devinfo.role == ROLE_INITIATOR) {
1268                                 if (bus_phase == P_MESGOUT) {
1269                                         if (scb == NULL)
1270                                                 panic("HOST_MSG_LOOP with "
1271                                                       "invalid SCB %x\n",
1272                                                       scb_index);
1273
1274                                         ahc_setup_initiator_msgout(ahc,
1275                                                                    &devinfo,
1276                                                                    scb);
1277                                 } else {
1278                                         ahc->msg_type =
1279                                             MSG_TYPE_INITIATOR_MSGIN;
1280                                         ahc->msgin_index = 0;
1281                                 }
1282                         }
1283 #ifdef AHC_TARGET_MODE
1284                         else {
1285                                 if (bus_phase == P_MESGOUT) {
1286                                         ahc->msg_type =
1287                                             MSG_TYPE_TARGET_MSGOUT;
1288                                         ahc->msgin_index = 0;
1289                                 }
1290                                 else
1291                                         ahc_setup_target_msgin(ahc,
1292                                                                &devinfo,
1293                                                                scb);
1294                         }
1295 #endif
1296                 }
1297
1298                 ahc_handle_message_phase(ahc);
1299                 break;
1300         }
1301         case PERR_DETECTED:
1302         {
1303                 /*
1304                  * If we've cleared the parity error interrupt
1305                  * but the sequencer still believes that SCSIPERR
1306                  * is true, it must be that the parity error is
1307                  * for the currently presented byte on the bus,
1308                  * and we are not in a phase (data-in) where we will
1309                  * eventually ack this byte.  Ack the byte and
1310                  * throw it away in the hope that the target will
1311                  * take us to message out to deliver the appropriate
1312                  * error message.
1313                  */
1314                 if ((intstat & SCSIINT) == 0
1315                  && (ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0) {
1316
1317                         if ((ahc->features & AHC_DT) == 0) {
1318                                 u_int curphase;
1319
1320                                 /*
1321                                  * The hardware will only let you ack bytes
1322                                  * if the expected phase in SCSISIGO matches
1323                                  * the current phase.  Make sure this is
1324                                  * currently the case.
1325                                  */
1326                                 curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
1327                                 ahc_outb(ahc, LASTPHASE, curphase);
1328                                 ahc_outb(ahc, SCSISIGO, curphase);
1329                         }
1330                         if ((ahc_inb(ahc, SCSISIGI) & (CDI|MSGI)) == 0) {
1331                                 int wait;
1332
1333                                 /*
1334                                  * In a data phase.  Faster to bitbucket
1335                                  * the data than to individually ack each
1336                                  * byte.  This is also the only strategy
1337                                  * that will work with AUTOACK enabled.
1338                                  */
1339                                 ahc_outb(ahc, SXFRCTL1,
1340                                          ahc_inb(ahc, SXFRCTL1) | BITBUCKET);
1341                                 wait = 5000;
1342                                 while (--wait != 0) {
1343                                         if ((ahc_inb(ahc, SCSISIGI)
1344                                           & (CDI|MSGI)) != 0)
1345                                                 break;
1346                                         ahc_delay(100);
1347                                 }
1348                                 ahc_outb(ahc, SXFRCTL1,
1349                                          ahc_inb(ahc, SXFRCTL1) & ~BITBUCKET);
1350                                 if (wait == 0) {
1351                                         struct  scb *scb;
1352                                         u_int   scb_index;
1353
1354                                         ahc_print_devinfo(ahc, &devinfo);
1355                                         printk("Unable to clear parity error.  "
1356                                                "Resetting bus.\n");
1357                                         scb_index = ahc_inb(ahc, SCB_TAG);
1358                                         scb = ahc_lookup_scb(ahc, scb_index);
1359                                         if (scb != NULL)
1360                                                 ahc_set_transaction_status(scb,
1361                                                     CAM_UNCOR_PARITY);
1362                                         ahc_reset_channel(ahc, devinfo.channel,
1363                                                           /*init reset*/TRUE);
1364                                 }
1365                         } else {
1366                                 ahc_inb(ahc, SCSIDATL);
1367                         }
1368                 }
1369                 break;
1370         }
1371         case DATA_OVERRUN:
1372         {
1373                 /*
1374                  * When the sequencer detects an overrun, it
1375                  * places the controller in "BITBUCKET" mode
1376                  * and allows the target to complete its transfer.
1377                  * Unfortunately, none of the counters get updated
1378                  * when the controller is in this mode, so we have
1379                  * no way of knowing how large the overrun was.
1380                  */
1381                 u_int scbindex = ahc_inb(ahc, SCB_TAG);
1382                 u_int lastphase = ahc_inb(ahc, LASTPHASE);
1383                 u_int i;
1384
1385                 scb = ahc_lookup_scb(ahc, scbindex);
1386                 for (i = 0; i < num_phases; i++) {
1387                         if (lastphase == ahc_phase_table[i].phase)
1388                                 break;
1389                 }
1390                 ahc_print_path(ahc, scb);
1391                 printk("data overrun detected %s."
1392                        "  Tag == 0x%x.\n",
1393                        ahc_phase_table[i].phasemsg,
1394                        scb->hscb->tag);
1395                 ahc_print_path(ahc, scb);
1396                 printk("%s seen Data Phase.  Length = %ld.  NumSGs = %d.\n",
1397                        ahc_inb(ahc, SEQ_FLAGS) & DPHASE ? "Have" : "Haven't",
1398                        ahc_get_transfer_length(scb), scb->sg_count);
1399                 if (scb->sg_count > 0) {
1400                         for (i = 0; i < scb->sg_count; i++) {
1401
1402                                 printk("sg[%d] - Addr 0x%x%x : Length %d\n",
1403                                        i,
1404                                        (ahc_le32toh(scb->sg_list[i].len) >> 24
1405                                         & SG_HIGH_ADDR_BITS),
1406                                        ahc_le32toh(scb->sg_list[i].addr),
1407                                        ahc_le32toh(scb->sg_list[i].len)
1408                                        & AHC_SG_LEN_MASK);
1409                         }
1410                 }
1411                 /*
1412                  * Set this and it will take effect when the
1413                  * target does a command complete.
1414                  */
1415                 ahc_freeze_devq(ahc, scb);
1416                 if ((scb->flags & SCB_SENSE) == 0) {
1417                         ahc_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1418                 } else {
1419                         scb->flags &= ~SCB_SENSE;
1420                         ahc_set_transaction_status(scb, CAM_AUTOSENSE_FAIL);
1421                 }
1422                 ahc_freeze_scb(scb);
1423
1424                 if ((ahc->features & AHC_ULTRA2) != 0) {
1425                         /*
1426                          * Clear the channel in case we return
1427                          * to data phase later.
1428                          */
1429                         ahc_outb(ahc, SXFRCTL0,
1430                                  ahc_inb(ahc, SXFRCTL0) | CLRSTCNT|CLRCHN);
1431                         ahc_outb(ahc, SXFRCTL0,
1432                                  ahc_inb(ahc, SXFRCTL0) | CLRSTCNT|CLRCHN);
1433                 }
1434                 if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) {
1435                         u_int dscommand1;
1436
1437                         /* Ensure HHADDR is 0 for future DMA operations. */
1438                         dscommand1 = ahc_inb(ahc, DSCOMMAND1);
1439                         ahc_outb(ahc, DSCOMMAND1, dscommand1 | HADDLDSEL0);
1440                         ahc_outb(ahc, HADDR, 0);
1441                         ahc_outb(ahc, DSCOMMAND1, dscommand1);
1442                 }
1443                 break;
1444         }
1445         case MKMSG_FAILED:
1446         {
1447                 u_int scbindex;
1448
1449                 printk("%s:%c:%d:%d: Attempt to issue message failed\n",
1450                        ahc_name(ahc), devinfo.channel, devinfo.target,
1451                        devinfo.lun);
1452                 scbindex = ahc_inb(ahc, SCB_TAG);
1453                 scb = ahc_lookup_scb(ahc, scbindex);
1454                 if (scb != NULL
1455                  && (scb->flags & SCB_RECOVERY_SCB) != 0)
1456                         /*
1457                          * Ensure that we didn't put a second instance of this
1458                          * SCB into the QINFIFO.
1459                          */
1460                         ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
1461                                            SCB_GET_CHANNEL(ahc, scb),
1462                                            SCB_GET_LUN(scb), scb->hscb->tag,
1463                                            ROLE_INITIATOR, /*status*/0,
1464                                            SEARCH_REMOVE);
1465                 break;
1466         }
1467         case NO_FREE_SCB:
1468         {
1469                 printk("%s: No free or disconnected SCBs\n", ahc_name(ahc));
1470                 ahc_dump_card_state(ahc);
1471                 panic("for safety");
1472                 break;
1473         }
1474         case SCB_MISMATCH:
1475         {
1476                 u_int scbptr;
1477
1478                 scbptr = ahc_inb(ahc, SCBPTR);
1479                 printk("Bogus TAG after DMA.  SCBPTR %d, tag %d, our tag %d\n",
1480                        scbptr, ahc_inb(ahc, ARG_1),
1481                        ahc->scb_data->hscbs[scbptr].tag);
1482                 ahc_dump_card_state(ahc);
1483                 panic("for safety");
1484                 break;
1485         }
1486         case OUT_OF_RANGE:
1487         {
1488                 printk("%s: BTT calculation out of range\n", ahc_name(ahc));
1489                 printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
1490                        "ARG_1 == 0x%x ACCUM = 0x%x\n",
1491                        ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN),
1492                        ahc_inb(ahc, ARG_1), ahc_inb(ahc, ACCUM));
1493                 printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
1494                        "SINDEX == 0x%x\n, A == 0x%x\n",
1495                        ahc_inb(ahc, SEQ_FLAGS), ahc_inb(ahc, SCBPTR),
1496                        ahc_index_busy_tcl(ahc,
1497                             BUILD_TCL(ahc_inb(ahc, SAVED_SCSIID),
1498                                       ahc_inb(ahc, SAVED_LUN))),
1499                        ahc_inb(ahc, SINDEX),
1500                        ahc_inb(ahc, ACCUM));
1501                 printk("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
1502                        "SCB_TAG == 0x%x, SCB_CONTROL == 0x%x\n",
1503                        ahc_inb(ahc, SCSIID), ahc_inb(ahc, SCB_SCSIID),
1504                        ahc_inb(ahc, SCB_LUN), ahc_inb(ahc, SCB_TAG),
1505                        ahc_inb(ahc, SCB_CONTROL));
1506                 printk("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n",
1507                        ahc_inb(ahc, SCSIBUSL), ahc_inb(ahc, SCSISIGI));
1508                 ahc_dump_card_state(ahc);
1509                 panic("for safety");
1510                 break;
1511         }
1512         default:
1513                 printk("ahc_intr: seqint, "
1514                        "intstat == 0x%x, scsisigi = 0x%x\n",
1515                        intstat, ahc_inb(ahc, SCSISIGI));
1516                 break;
1517         }
1518 unpause:
1519         /*
1520          *  The sequencer is paused immediately on
1521          *  a SEQINT, so we should restart it when
1522          *  we're done.
1523          */
1524         ahc_unpause(ahc);
1525 }
1526
1527 static void
1528 ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
1529 {
1530         u_int   scb_index;
1531         u_int   status0;
1532         u_int   status;
1533         struct  scb *scb;
1534         char    cur_channel;
1535         char    intr_channel;
1536
1537         if ((ahc->features & AHC_TWIN) != 0
1538          && ((ahc_inb(ahc, SBLKCTL) & SELBUSB) != 0))
1539                 cur_channel = 'B';
1540         else
1541                 cur_channel = 'A';
1542         intr_channel = cur_channel;
1543
1544         if ((ahc->features & AHC_ULTRA2) != 0)
1545                 status0 = ahc_inb(ahc, SSTAT0) & IOERR;
1546         else
1547                 status0 = 0;
1548         status = ahc_inb(ahc, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR);
1549         if (status == 0 && status0 == 0) {
1550                 if ((ahc->features & AHC_TWIN) != 0) {
1551                         /* Try the other channel */
1552                         ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB);
1553                         status = ahc_inb(ahc, SSTAT1)
1554                                & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR);
1555                         intr_channel = (cur_channel == 'A') ? 'B' : 'A';
1556                 }
1557                 if (status == 0) {
1558                         printk("%s: Spurious SCSI interrupt\n", ahc_name(ahc));
1559                         ahc_outb(ahc, CLRINT, CLRSCSIINT);
1560                         ahc_unpause(ahc);
1561                         return;
1562                 }
1563         }
1564
1565         /* Make sure the sequencer is in a safe location. */
1566         ahc_clear_critical_section(ahc);
1567
1568         scb_index = ahc_inb(ahc, SCB_TAG);
1569         scb = ahc_lookup_scb(ahc, scb_index);
1570         if (scb != NULL
1571          && (ahc_inb(ahc, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
1572                 scb = NULL;
1573
1574         if ((ahc->features & AHC_ULTRA2) != 0
1575          && (status0 & IOERR) != 0) {
1576                 int now_lvd;
1577
1578                 now_lvd = ahc_inb(ahc, SBLKCTL) & ENAB40;
1579                 printk("%s: Transceiver State Has Changed to %s mode\n",
1580                        ahc_name(ahc), now_lvd ? "LVD" : "SE");
1581                 ahc_outb(ahc, CLRSINT0, CLRIOERR);
1582                 /*
1583                  * When transitioning to SE mode, the reset line
1584                  * glitches, triggering an arbitration bug in some
1585                  * Ultra2 controllers.  This bug is cleared when we
1586                  * assert the reset line.  Since a reset glitch has
1587                  * already occurred with this transition and a
1588                  * transceiver state change is handled just like
1589                  * a bus reset anyway, asserting the reset line
1590                  * ourselves is safe.
1591                  */
1592                 ahc_reset_channel(ahc, intr_channel,
1593                                  /*Initiate Reset*/now_lvd == 0);
1594         } else if ((status & SCSIRSTI) != 0) {
1595                 printk("%s: Someone reset channel %c\n",
1596                         ahc_name(ahc), intr_channel);
1597                 if (intr_channel != cur_channel)
1598                         ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB);
1599                 ahc_reset_channel(ahc, intr_channel, /*Initiate Reset*/FALSE);
1600         } else if ((status & SCSIPERR) != 0) {
1601                 /*
1602                  * Determine the bus phase and queue an appropriate message.
1603                  * SCSIPERR is latched true as soon as a parity error
1604                  * occurs.  If the sequencer acked the transfer that
1605                  * caused the parity error and the currently presented
1606                  * transfer on the bus has correct parity, SCSIPERR will
1607                  * be cleared by CLRSCSIPERR.  Use this to determine if
1608                  * we should look at the last phase the sequencer recorded,
1609                  * or the current phase presented on the bus.
1610                  */
1611                 struct  ahc_devinfo devinfo;
1612                 u_int   mesg_out;
1613                 u_int   curphase;
1614                 u_int   errorphase;
1615                 u_int   lastphase;
1616                 u_int   scsirate;
1617                 u_int   i;
1618                 u_int   sstat2;
1619                 int     silent;
1620
1621                 lastphase = ahc_inb(ahc, LASTPHASE);
1622                 curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
1623                 sstat2 = ahc_inb(ahc, SSTAT2);
1624                 ahc_outb(ahc, CLRSINT1, CLRSCSIPERR);
1625                 /*
1626                  * For all phases save DATA, the sequencer won't
1627                  * automatically ack a byte that has a parity error
1628                  * in it.  So the only way that the current phase
1629                  * could be 'data-in' is if the parity error is for
1630                  * an already acked byte in the data phase.  During
1631                  * synchronous data-in transfers, we may actually
1632                  * ack bytes before latching the current phase in
1633                  * LASTPHASE, leading to the discrepancy between
1634                  * curphase and lastphase.
1635                  */
1636                 if ((ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0
1637                  || curphase == P_DATAIN || curphase == P_DATAIN_DT)
1638                         errorphase = curphase;
1639                 else
1640                         errorphase = lastphase;
1641
1642                 for (i = 0; i < num_phases; i++) {
1643                         if (errorphase == ahc_phase_table[i].phase)
1644                                 break;
1645                 }
1646                 mesg_out = ahc_phase_table[i].mesg_out;
1647                 silent = FALSE;
1648                 if (scb != NULL) {
1649                         if (SCB_IS_SILENT(scb))
1650                                 silent = TRUE;
1651                         else
1652                                 ahc_print_path(ahc, scb);
1653                         scb->flags |= SCB_TRANSMISSION_ERROR;
1654                 } else
1655                         printk("%s:%c:%d: ", ahc_name(ahc), intr_channel,
1656                                SCSIID_TARGET(ahc, ahc_inb(ahc, SAVED_SCSIID)));
1657                 scsirate = ahc_inb(ahc, SCSIRATE);
1658                 if (silent == FALSE) {
1659                         printk("parity error detected %s. "
1660                                "SEQADDR(0x%x) SCSIRATE(0x%x)\n",
1661                                ahc_phase_table[i].phasemsg,
1662                                ahc_inw(ahc, SEQADDR0),
1663                                scsirate);
1664                         if ((ahc->features & AHC_DT) != 0) {
1665                                 if ((sstat2 & CRCVALERR) != 0)
1666                                         printk("\tCRC Value Mismatch\n");
1667                                 if ((sstat2 & CRCENDERR) != 0)
1668                                         printk("\tNo terminal CRC packet "
1669                                                "received\n");
1670                                 if ((sstat2 & CRCREQERR) != 0)
1671                                         printk("\tIllegal CRC packet "
1672                                                "request\n");
1673                                 if ((sstat2 & DUAL_EDGE_ERR) != 0)
1674                                         printk("\tUnexpected %sDT Data Phase\n",
1675                                                (scsirate & SINGLE_EDGE)
1676                                              ? "" : "non-");
1677                         }
1678                 }
1679
1680                 if ((ahc->features & AHC_DT) != 0
1681                  && (sstat2 & DUAL_EDGE_ERR) != 0) {
1682                         /*
1683                          * This error applies regardless of
1684                          * data direction, so ignore the value
1685                          * in the phase table.
1686                          */
1687                         mesg_out = MSG_INITIATOR_DET_ERR;
1688                 }
1689
1690                 /*
1691                  * We've set the hardware to assert ATN if we
1692                  * get a parity error on "in" phases, so all we
1693                  * need to do is stuff the message buffer with
1694                  * the appropriate message.  "In" phases have set
1695                  * mesg_out to something other than MSG_NOP.
1696                  */
1697                 if (mesg_out != MSG_NOOP) {
1698                         if (ahc->msg_type != MSG_TYPE_NONE)
1699                                 ahc->send_msg_perror = TRUE;
1700                         else
1701                                 ahc_outb(ahc, MSG_OUT, mesg_out);
1702                 }
1703                 /*
1704                  * Force a renegotiation with this target just in
1705                  * case we are out of sync for some external reason
1706                  * unknown (or unreported) by the target.
1707                  */
1708                 ahc_fetch_devinfo(ahc, &devinfo);
1709                 ahc_force_renegotiation(ahc, &devinfo);
1710
1711                 ahc_outb(ahc, CLRINT, CLRSCSIINT);
1712                 ahc_unpause(ahc);
1713         } else if ((status & SELTO) != 0) {
1714                 u_int   scbptr;
1715
1716                 /* Stop the selection */
1717                 ahc_outb(ahc, SCSISEQ, 0);
1718
1719                 /* No more pending messages */
1720                 ahc_clear_msg_state(ahc);
1721
1722                 /* Clear interrupt state */
1723                 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE);
1724                 ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR);
1725
1726                 /*
1727                  * Although the driver does not care about the
1728                  * 'Selection in Progress' status bit, the busy
1729                  * LED does.  SELINGO is only cleared by a successful
1730                  * selection, so we must manually clear it to insure
1731                  * the LED turns off just incase no future successful
1732                  * selections occur (e.g. no devices on the bus).
1733                  */
1734                 ahc_outb(ahc, CLRSINT0, CLRSELINGO);
1735
1736                 scbptr = ahc_inb(ahc, WAITING_SCBH);
1737                 ahc_outb(ahc, SCBPTR, scbptr);
1738                 scb_index = ahc_inb(ahc, SCB_TAG);
1739
1740                 scb = ahc_lookup_scb(ahc, scb_index);
1741                 if (scb == NULL) {
1742                         printk("%s: ahc_intr - referenced scb not "
1743                                "valid during SELTO scb(%d, %d)\n",
1744                                ahc_name(ahc), scbptr, scb_index);
1745                         ahc_dump_card_state(ahc);
1746                 } else {
1747                         struct ahc_devinfo devinfo;
1748 #ifdef AHC_DEBUG
1749                         if ((ahc_debug & AHC_SHOW_SELTO) != 0) {
1750                                 ahc_print_path(ahc, scb);
1751                                 printk("Saw Selection Timeout for SCB 0x%x\n",
1752                                        scb_index);
1753                         }
1754 #endif
1755                         ahc_scb_devinfo(ahc, &devinfo, scb);
1756                         ahc_set_transaction_status(scb, CAM_SEL_TIMEOUT);
1757                         ahc_freeze_devq(ahc, scb);
1758
1759                         /*
1760                          * Cancel any pending transactions on the device
1761                          * now that it seems to be missing.  This will
1762                          * also revert us to async/narrow transfers until
1763                          * we can renegotiate with the device.
1764                          */
1765                         ahc_handle_devreset(ahc, &devinfo,
1766                                             CAM_SEL_TIMEOUT,
1767                                             "Selection Timeout",
1768                                             /*verbose_level*/1);
1769                 }
1770                 ahc_outb(ahc, CLRINT, CLRSCSIINT);
1771                 ahc_restart(ahc);
1772         } else if ((status & BUSFREE) != 0
1773                 && (ahc_inb(ahc, SIMODE1) & ENBUSFREE) != 0) {
1774                 struct  ahc_devinfo devinfo;
1775                 u_int   lastphase;
1776                 u_int   saved_scsiid;
1777                 u_int   saved_lun;
1778                 u_int   target;
1779                 u_int   initiator_role_id;
1780                 char    channel;
1781                 int     printerror;
1782
1783                 /*
1784                  * Clear our selection hardware as soon as possible.
1785                  * We may have an entry in the waiting Q for this target,
1786                  * that is affected by this busfree and we don't want to
1787                  * go about selecting the target while we handle the event.
1788                  */
1789                 ahc_outb(ahc, SCSISEQ,
1790                          ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP));
1791
1792                 /*
1793                  * Disable busfree interrupts and clear the busfree
1794                  * interrupt status.  We do this here so that several
1795                  * bus transactions occur prior to clearing the SCSIINT
1796                  * latch.  It can take a bit for the clearing to take effect.
1797                  */
1798                 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE);
1799                 ahc_outb(ahc, CLRSINT1, CLRBUSFREE|CLRSCSIPERR);
1800
1801                 /*
1802                  * Look at what phase we were last in.
1803                  * If its message out, chances are pretty good
1804                  * that the busfree was in response to one of
1805                  * our abort requests.
1806                  */
1807                 lastphase = ahc_inb(ahc, LASTPHASE);
1808                 saved_scsiid = ahc_inb(ahc, SAVED_SCSIID);
1809                 saved_lun = ahc_inb(ahc, SAVED_LUN);
1810                 target = SCSIID_TARGET(ahc, saved_scsiid);
1811                 initiator_role_id = SCSIID_OUR_ID(saved_scsiid);
1812                 channel = SCSIID_CHANNEL(ahc, saved_scsiid);
1813                 ahc_compile_devinfo(&devinfo, initiator_role_id,
1814                                     target, saved_lun, channel, ROLE_INITIATOR);
1815                 printerror = 1;
1816
1817                 if (lastphase == P_MESGOUT) {
1818                         u_int tag;
1819
1820                         tag = SCB_LIST_NULL;
1821                         if (ahc_sent_msg(ahc, AHCMSG_1B, MSG_ABORT_TAG, TRUE)
1822                          || ahc_sent_msg(ahc, AHCMSG_1B, MSG_ABORT, TRUE)) {
1823                                 if (ahc->msgout_buf[ahc->msgout_index - 1]
1824                                  == MSG_ABORT_TAG)
1825                                         tag = scb->hscb->tag;
1826                                 ahc_print_path(ahc, scb);
1827                                 printk("SCB %d - Abort%s Completed.\n",
1828                                        scb->hscb->tag, tag == SCB_LIST_NULL ?
1829                                        "" : " Tag");
1830                                 ahc_abort_scbs(ahc, target, channel,
1831                                                saved_lun, tag,
1832                                                ROLE_INITIATOR,
1833                                                CAM_REQ_ABORTED);
1834                                 printerror = 0;
1835                         } else if (ahc_sent_msg(ahc, AHCMSG_1B,
1836                                                 MSG_BUS_DEV_RESET, TRUE)) {
1837 #ifdef __FreeBSD__
1838                                 /*
1839                                  * Don't mark the user's request for this BDR
1840                                  * as completing with CAM_BDR_SENT.  CAM3
1841                                  * specifies CAM_REQ_CMP.
1842                                  */
1843                                 if (scb != NULL
1844                                  && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV
1845                                  && ahc_match_scb(ahc, scb, target, channel,
1846                                                   CAM_LUN_WILDCARD,
1847                                                   SCB_LIST_NULL,
1848                                                   ROLE_INITIATOR)) {
1849                                         ahc_set_transaction_status(scb, CAM_REQ_CMP);
1850                                 }
1851 #endif
1852                                 ahc_compile_devinfo(&devinfo,
1853                                                     initiator_role_id,
1854                                                     target,
1855                                                     CAM_LUN_WILDCARD,
1856                                                     channel,
1857                                                     ROLE_INITIATOR);
1858                                 ahc_handle_devreset(ahc, &devinfo,
1859                                                     CAM_BDR_SENT,
1860                                                     "Bus Device Reset",
1861                                                     /*verbose_level*/0);
1862                                 printerror = 0;
1863                         } else if (ahc_sent_msg(ahc, AHCMSG_EXT,
1864                                                 MSG_EXT_PPR, FALSE)) {
1865                                 struct ahc_initiator_tinfo *tinfo;
1866                                 struct ahc_tmode_tstate *tstate;
1867
1868                                 /*
1869                                  * PPR Rejected.  Try non-ppr negotiation
1870                                  * and retry command.
1871                                  */
1872                                 tinfo = ahc_fetch_transinfo(ahc,
1873                                                             devinfo.channel,
1874                                                             devinfo.our_scsiid,
1875                                                             devinfo.target,
1876                                                             &tstate);
1877                                 tinfo->curr.transport_version = 2;
1878                                 tinfo->goal.transport_version = 2;
1879                                 tinfo->goal.ppr_options = 0;
1880                                 ahc_qinfifo_requeue_tail(ahc, scb);
1881                                 printerror = 0;
1882                         } else if (ahc_sent_msg(ahc, AHCMSG_EXT,
1883                                                 MSG_EXT_WDTR, FALSE)) {
1884                                 /*
1885                                  * Negotiation Rejected.  Go-narrow and
1886                                  * retry command.
1887                                  */
1888                                 ahc_set_width(ahc, &devinfo,
1889                                               MSG_EXT_WDTR_BUS_8_BIT,
1890                                               AHC_TRANS_CUR|AHC_TRANS_GOAL,
1891                                               /*paused*/TRUE);
1892                                 ahc_qinfifo_requeue_tail(ahc, scb);
1893                                 printerror = 0;
1894                         } else if (ahc_sent_msg(ahc, AHCMSG_EXT,
1895                                                 MSG_EXT_SDTR, FALSE)) {
1896                                 /*
1897                                  * Negotiation Rejected.  Go-async and
1898                                  * retry command.
1899                                  */
1900                                 ahc_set_syncrate(ahc, &devinfo,
1901                                                 /*syncrate*/NULL,
1902                                                 /*period*/0, /*offset*/0,
1903                                                 /*ppr_options*/0,
1904                                                 AHC_TRANS_CUR|AHC_TRANS_GOAL,
1905                                                 /*paused*/TRUE);
1906                                 ahc_qinfifo_requeue_tail(ahc, scb);
1907                                 printerror = 0;
1908                         }
1909                 }
1910                 if (printerror != 0) {
1911                         u_int i;
1912
1913                         if (scb != NULL) {
1914                                 u_int tag;
1915
1916                                 if ((scb->hscb->control & TAG_ENB) != 0)
1917                                         tag = scb->hscb->tag;
1918                                 else
1919                                         tag = SCB_LIST_NULL;
1920                                 ahc_print_path(ahc, scb);
1921                                 ahc_abort_scbs(ahc, target, channel,
1922                                                SCB_GET_LUN(scb), tag,
1923                                                ROLE_INITIATOR,
1924                                                CAM_UNEXP_BUSFREE);
1925                         } else {
1926                                 /*
1927                                  * We had not fully identified this connection,
1928                                  * so we cannot abort anything.
1929                                  */
1930                                 printk("%s: ", ahc_name(ahc));
1931                         }
1932                         for (i = 0; i < num_phases; i++) {
1933                                 if (lastphase == ahc_phase_table[i].phase)
1934                                         break;
1935                         }
1936                         if (lastphase != P_BUSFREE) {
1937                                 /*
1938                                  * Renegotiate with this device at the
1939                                  * next opportunity just in case this busfree
1940                                  * is due to a negotiation mismatch with the
1941                                  * device.
1942                                  */
1943                                 ahc_force_renegotiation(ahc, &devinfo);
1944                         }
1945                         printk("Unexpected busfree %s\n"
1946                                "SEQADDR == 0x%x\n",
1947                                ahc_phase_table[i].phasemsg,
1948                                ahc_inb(ahc, SEQADDR0)
1949                                 | (ahc_inb(ahc, SEQADDR1) << 8));
1950                 }
1951                 ahc_outb(ahc, CLRINT, CLRSCSIINT);
1952                 ahc_restart(ahc);
1953         } else {
1954                 printk("%s: Missing case in ahc_handle_scsiint. status = %x\n",
1955                        ahc_name(ahc), status);
1956                 ahc_outb(ahc, CLRINT, CLRSCSIINT);
1957         }
1958 }
1959
1960 /*
1961  * Force renegotiation to occur the next time we initiate
1962  * a command to the current device.
1963  */
1964 static void
1965 ahc_force_renegotiation(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
1966 {
1967         struct  ahc_initiator_tinfo *targ_info;
1968         struct  ahc_tmode_tstate *tstate;
1969
1970         targ_info = ahc_fetch_transinfo(ahc,
1971                                         devinfo->channel,
1972                                         devinfo->our_scsiid,
1973                                         devinfo->target,
1974                                         &tstate);
1975         ahc_update_neg_request(ahc, devinfo, tstate,
1976                                targ_info, AHC_NEG_IF_NON_ASYNC);
1977 }
1978
1979 #define AHC_MAX_STEPS 2000
1980 static void
1981 ahc_clear_critical_section(struct ahc_softc *ahc)
1982 {
1983         int     stepping;
1984         int     steps;
1985         u_int   simode0;
1986         u_int   simode1;
1987
1988         if (ahc->num_critical_sections == 0)
1989                 return;
1990
1991         stepping = FALSE;
1992         steps = 0;
1993         simode0 = 0;
1994         simode1 = 0;
1995         for (;;) {
1996                 struct  cs *cs;
1997                 u_int   seqaddr;
1998                 u_int   i;
1999
2000                 seqaddr = ahc_inb(ahc, SEQADDR0)
2001                         | (ahc_inb(ahc, SEQADDR1) << 8);
2002
2003                 /*
2004                  * Seqaddr represents the next instruction to execute,
2005                  * so we are really executing the instruction just
2006                  * before it.
2007                  */
2008                 if (seqaddr != 0)
2009                         seqaddr -= 1;
2010                 cs = ahc->critical_sections;
2011                 for (i = 0; i < ahc->num_critical_sections; i++, cs++) {
2012
2013                         if (cs->begin < seqaddr && cs->end >= seqaddr)
2014                                 break;
2015                 }
2016
2017                 if (i == ahc->num_critical_sections)
2018                         break;
2019
2020                 if (steps > AHC_MAX_STEPS) {
2021                         printk("%s: Infinite loop in critical section\n",
2022                                ahc_name(ahc));
2023                         ahc_dump_card_state(ahc);
2024                         panic("critical section loop");
2025                 }
2026
2027                 steps++;
2028                 if (stepping == FALSE) {
2029
2030                         /*
2031                          * Disable all interrupt sources so that the
2032                          * sequencer will not be stuck by a pausing
2033                          * interrupt condition while we attempt to
2034                          * leave a critical section.
2035                          */
2036                         simode0 = ahc_inb(ahc, SIMODE0);
2037                         ahc_outb(ahc, SIMODE0, 0);
2038                         simode1 = ahc_inb(ahc, SIMODE1);
2039                         if ((ahc->features & AHC_DT) != 0)
2040                                 /*
2041                                  * On DT class controllers, we
2042                                  * use the enhanced busfree logic.
2043                                  * Unfortunately we cannot re-enable
2044                                  * busfree detection within the
2045                                  * current connection, so we must
2046                                  * leave it on while single stepping.
2047                                  */
2048                                 ahc_outb(ahc, SIMODE1, simode1 & ENBUSFREE);
2049                         else
2050                                 ahc_outb(ahc, SIMODE1, 0);
2051                         ahc_outb(ahc, CLRINT, CLRSCSIINT);
2052                         ahc_outb(ahc, SEQCTL, ahc->seqctl | STEP);
2053                         stepping = TRUE;
2054                 }
2055                 if ((ahc->features & AHC_DT) != 0) {
2056                         ahc_outb(ahc, CLRSINT1, CLRBUSFREE);
2057                         ahc_outb(ahc, CLRINT, CLRSCSIINT);
2058                 }
2059                 ahc_outb(ahc, HCNTRL, ahc->unpause);
2060                 while (!ahc_is_paused(ahc))
2061                         ahc_delay(200);
2062         }
2063         if (stepping) {
2064                 ahc_outb(ahc, SIMODE0, simode0);
2065                 ahc_outb(ahc, SIMODE1, simode1);
2066                 ahc_outb(ahc, SEQCTL, ahc->seqctl);
2067         }
2068 }
2069
2070 /*
2071  * Clear any pending interrupt status.
2072  */
2073 static void
2074 ahc_clear_intstat(struct ahc_softc *ahc)
2075 {
2076         /* Clear any interrupt conditions this may have caused */
2077         ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI
2078                                 |CLRBUSFREE|CLRSCSIPERR|CLRPHASECHG|
2079                                 CLRREQINIT);
2080         ahc_flush_device_writes(ahc);
2081         ahc_outb(ahc, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO);
2082         ahc_flush_device_writes(ahc);
2083         ahc_outb(ahc, CLRINT, CLRSCSIINT);
2084         ahc_flush_device_writes(ahc);
2085 }
2086
2087 /**************************** Debugging Routines ******************************/
2088 #ifdef AHC_DEBUG
2089 uint32_t ahc_debug = AHC_DEBUG_OPTS;
2090 #endif
2091
2092 #if 0 /* unused */
2093 static void
2094 ahc_print_scb(struct scb *scb)
2095 {
2096         int i;
2097
2098         struct hardware_scb *hscb = scb->hscb;
2099
2100         printk("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n",
2101                (void *)scb,
2102                hscb->control,
2103                hscb->scsiid,
2104                hscb->lun,
2105                hscb->cdb_len);
2106         printk("Shared Data: ");
2107         for (i = 0; i < sizeof(hscb->shared_data.cdb); i++)
2108                 printk("%#02x", hscb->shared_data.cdb[i]);
2109         printk("        dataptr:%#x datacnt:%#x sgptr:%#x tag:%#x\n",
2110                 ahc_le32toh(hscb->dataptr),
2111                 ahc_le32toh(hscb->datacnt),
2112                 ahc_le32toh(hscb->sgptr),
2113                 hscb->tag);
2114         if (scb->sg_count > 0) {
2115                 for (i = 0; i < scb->sg_count; i++) {
2116                         printk("sg[%d] - Addr 0x%x%x : Length %d\n",
2117                                i,
2118                                (ahc_le32toh(scb->sg_list[i].len) >> 24
2119                                 & SG_HIGH_ADDR_BITS),
2120                                ahc_le32toh(scb->sg_list[i].addr),
2121                                ahc_le32toh(scb->sg_list[i].len));
2122                 }
2123         }
2124 }
2125 #endif
2126
2127 /************************* Transfer Negotiation *******************************/
2128 /*
2129  * Allocate per target mode instance (ID we respond to as a target)
2130  * transfer negotiation data structures.
2131  */
2132 static struct ahc_tmode_tstate *
2133 ahc_alloc_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel)
2134 {
2135         struct ahc_tmode_tstate *master_tstate;
2136         struct ahc_tmode_tstate *tstate;
2137         int i;
2138
2139         master_tstate = ahc->enabled_targets[ahc->our_id];
2140         if (channel == 'B') {
2141                 scsi_id += 8;
2142                 master_tstate = ahc->enabled_targets[ahc->our_id_b + 8];
2143         }
2144         if (ahc->enabled_targets[scsi_id] != NULL
2145          && ahc->enabled_targets[scsi_id] != master_tstate)
2146                 panic("%s: ahc_alloc_tstate - Target already allocated",
2147                       ahc_name(ahc));
2148         tstate = kmalloc(sizeof(*tstate), GFP_ATOMIC);
2149         if (tstate == NULL)
2150                 return (NULL);
2151
2152         /*
2153          * If we have allocated a master tstate, copy user settings from
2154          * the master tstate (taken from SRAM or the EEPROM) for this
2155          * channel, but reset our current and goal settings to async/narrow
2156          * until an initiator talks to us.
2157          */
2158         if (master_tstate != NULL) {
2159                 memcpy(tstate, master_tstate, sizeof(*tstate));
2160                 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns));
2161                 tstate->ultraenb = 0;
2162                 for (i = 0; i < AHC_NUM_TARGETS; i++) {
2163                         memset(&tstate->transinfo[i].curr, 0,
2164                               sizeof(tstate->transinfo[i].curr));
2165                         memset(&tstate->transinfo[i].goal, 0,
2166                               sizeof(tstate->transinfo[i].goal));
2167                 }
2168         } else
2169                 memset(tstate, 0, sizeof(*tstate));
2170         ahc->enabled_targets[scsi_id] = tstate;
2171         return (tstate);
2172 }
2173
2174 #ifdef AHC_TARGET_MODE
2175 /*
2176  * Free per target mode instance (ID we respond to as a target)
2177  * transfer negotiation data structures.
2178  */
2179 static void
2180 ahc_free_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel, int force)
2181 {
2182         struct ahc_tmode_tstate *tstate;
2183
2184         /*
2185          * Don't clean up our "master" tstate.
2186          * It has our default user settings.
2187          */
2188         if (((channel == 'B' && scsi_id == ahc->our_id_b)
2189           || (channel == 'A' && scsi_id == ahc->our_id))
2190          && force == FALSE)
2191                 return;
2192
2193         if (channel == 'B')
2194                 scsi_id += 8;
2195         tstate = ahc->enabled_targets[scsi_id];
2196         if (tstate != NULL)
2197                 kfree(tstate);
2198         ahc->enabled_targets[scsi_id] = NULL;
2199 }
2200 #endif
2201
2202 /*
2203  * Called when we have an active connection to a target on the bus,
2204  * this function finds the nearest syncrate to the input period limited
2205  * by the capabilities of the bus connectivity of and sync settings for
2206  * the target.
2207  */
2208 static const struct ahc_syncrate *
2209 ahc_devlimited_syncrate(struct ahc_softc *ahc,
2210                         struct ahc_initiator_tinfo *tinfo,
2211                         u_int *period, u_int *ppr_options, role_t role)
2212 {
2213         struct  ahc_transinfo *transinfo;
2214         u_int   maxsync;
2215
2216         if ((ahc->features & AHC_ULTRA2) != 0) {
2217                 if ((ahc_inb(ahc, SBLKCTL) & ENAB40) != 0
2218                  && (ahc_inb(ahc, SSTAT2) & EXP_ACTIVE) == 0) {
2219                         maxsync = AHC_SYNCRATE_DT;
2220                 } else {
2221                         maxsync = AHC_SYNCRATE_ULTRA;
2222                         /* Can't do DT on an SE bus */
2223                         *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2224                 }
2225         } else if ((ahc->features & AHC_ULTRA) != 0) {
2226                 maxsync = AHC_SYNCRATE_ULTRA;
2227         } else {
2228                 maxsync = AHC_SYNCRATE_FAST;
2229         }
2230         /*
2231          * Never allow a value higher than our current goal
2232          * period otherwise we may allow a target initiated
2233          * negotiation to go above the limit as set by the
2234          * user.  In the case of an initiator initiated
2235          * sync negotiation, we limit based on the user
2236          * setting.  This allows the system to still accept
2237          * incoming negotiations even if target initiated
2238          * negotiation is not performed.
2239          */
2240         if (role == ROLE_TARGET)
2241                 transinfo = &tinfo->user;
2242         else
2243                 transinfo = &tinfo->goal;
2244         *ppr_options &= transinfo->ppr_options;
2245         if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) {
2246                 maxsync = max(maxsync, (u_int)AHC_SYNCRATE_ULTRA2);
2247                 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2248         }
2249         if (transinfo->period == 0) {
2250                 *period = 0;
2251                 *ppr_options = 0;
2252                 return (NULL);
2253         }
2254         *period = max(*period, (u_int)transinfo->period);
2255         return (ahc_find_syncrate(ahc, period, ppr_options, maxsync));
2256 }
2257
2258 /*
2259  * Look up the valid period to SCSIRATE conversion in our table.
2260  * Return the period and offset that should be sent to the target
2261  * if this was the beginning of an SDTR.
2262  */
2263 const struct ahc_syncrate *
2264 ahc_find_syncrate(struct ahc_softc *ahc, u_int *period,
2265                   u_int *ppr_options, u_int maxsync)
2266 {
2267         const struct ahc_syncrate *syncrate;
2268
2269         if ((ahc->features & AHC_DT) == 0)
2270                 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2271
2272         /* Skip all DT only entries if DT is not available */
2273         if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0
2274          && maxsync < AHC_SYNCRATE_ULTRA2)
2275                 maxsync = AHC_SYNCRATE_ULTRA2;
2276
2277         /* Now set the maxsync based on the card capabilities
2278          * DT is already done above */
2279         if ((ahc->features & (AHC_DT | AHC_ULTRA2)) == 0
2280             && maxsync < AHC_SYNCRATE_ULTRA)
2281                 maxsync = AHC_SYNCRATE_ULTRA;
2282         if ((ahc->features & (AHC_DT | AHC_ULTRA2 | AHC_ULTRA)) == 0
2283             && maxsync < AHC_SYNCRATE_FAST)
2284                 maxsync = AHC_SYNCRATE_FAST;
2285
2286         for (syncrate = &ahc_syncrates[maxsync];
2287              syncrate->rate != NULL;
2288              syncrate++) {
2289
2290                 /*
2291                  * The Ultra2 table doesn't go as low
2292                  * as for the Fast/Ultra cards.
2293                  */
2294                 if ((ahc->features & AHC_ULTRA2) != 0
2295                  && (syncrate->sxfr_u2 == 0))
2296                         break;
2297
2298                 if (*period <= syncrate->period) {
2299                         /*
2300                          * When responding to a target that requests
2301                          * sync, the requested rate may fall between
2302                          * two rates that we can output, but still be
2303                          * a rate that we can receive.  Because of this,
2304                          * we want to respond to the target with
2305                          * the same rate that it sent to us even
2306                          * if the period we use to send data to it
2307                          * is lower.  Only lower the response period
2308                          * if we must.
2309                          */
2310                         if (syncrate == &ahc_syncrates[maxsync])
2311                                 *period = syncrate->period;
2312
2313                         /*
2314                          * At some speeds, we only support
2315                          * ST transfers.
2316                          */
2317                         if ((syncrate->sxfr_u2 & ST_SXFR) != 0)
2318                                 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2319                         break;
2320                 }
2321         }
2322
2323         if ((*period == 0)
2324          || (syncrate->rate == NULL)
2325          || ((ahc->features & AHC_ULTRA2) != 0
2326           && (syncrate->sxfr_u2 == 0))) {
2327                 /* Use asynchronous transfers. */
2328                 *period = 0;
2329                 syncrate = NULL;
2330                 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2331         }
2332         return (syncrate);
2333 }
2334
2335 /*
2336  * Convert from an entry in our syncrate table to the SCSI equivalent
2337  * sync "period" factor.
2338  */
2339 u_int
2340 ahc_find_period(struct ahc_softc *ahc, u_int scsirate, u_int maxsync)
2341 {
2342         const struct ahc_syncrate *syncrate;
2343
2344         if ((ahc->features & AHC_ULTRA2) != 0)
2345                 scsirate &= SXFR_ULTRA2;
2346         else
2347                 scsirate &= SXFR;
2348
2349         /* now set maxsync based on card capabilities */
2350         if ((ahc->features & AHC_DT) == 0 && maxsync < AHC_SYNCRATE_ULTRA2)
2351                 maxsync = AHC_SYNCRATE_ULTRA2;
2352         if ((ahc->features & (AHC_DT | AHC_ULTRA2)) == 0
2353             && maxsync < AHC_SYNCRATE_ULTRA)
2354                 maxsync = AHC_SYNCRATE_ULTRA;
2355         if ((ahc->features & (AHC_DT | AHC_ULTRA2 | AHC_ULTRA)) == 0
2356             && maxsync < AHC_SYNCRATE_FAST)
2357                 maxsync = AHC_SYNCRATE_FAST;
2358
2359
2360         syncrate = &ahc_syncrates[maxsync];
2361         while (syncrate->rate != NULL) {
2362
2363                 if ((ahc->features & AHC_ULTRA2) != 0) {
2364                         if (syncrate->sxfr_u2 == 0)
2365                                 break;
2366                         else if (scsirate == (syncrate->sxfr_u2 & SXFR_ULTRA2))
2367                                 return (syncrate->period);
2368                 } else if (scsirate == (syncrate->sxfr & SXFR)) {
2369                                 return (syncrate->period);
2370                 }
2371                 syncrate++;
2372         }
2373         return (0); /* async */
2374 }
2375
2376 /*
2377  * Truncate the given synchronous offset to a value the
2378  * current adapter type and syncrate are capable of.
2379  */
2380 static void
2381 ahc_validate_offset(struct ahc_softc *ahc,
2382                     struct ahc_initiator_tinfo *tinfo,
2383                     const struct ahc_syncrate *syncrate,
2384                     u_int *offset, int wide, role_t role)
2385 {
2386         u_int maxoffset;
2387
2388         /* Limit offset to what we can do */
2389         if (syncrate == NULL) {
2390                 maxoffset = 0;
2391         } else if ((ahc->features & AHC_ULTRA2) != 0) {
2392                 maxoffset = MAX_OFFSET_ULTRA2;
2393         } else {
2394                 if (wide)
2395                         maxoffset = MAX_OFFSET_16BIT;
2396                 else
2397                         maxoffset = MAX_OFFSET_8BIT;
2398         }
2399         *offset = min(*offset, maxoffset);
2400         if (tinfo != NULL) {
2401                 if (role == ROLE_TARGET)
2402                         *offset = min(*offset, (u_int)tinfo->user.offset);
2403                 else
2404                         *offset = min(*offset, (u_int)tinfo->goal.offset);
2405         }
2406 }
2407
2408 /*
2409  * Truncate the given transfer width parameter to a value the
2410  * current adapter type is capable of.
2411  */
2412 static void
2413 ahc_validate_width(struct ahc_softc *ahc, struct ahc_initiator_tinfo *tinfo,
2414                    u_int *bus_width, role_t role)
2415 {
2416         switch (*bus_width) {
2417         default:
2418                 if (ahc->features & AHC_WIDE) {
2419                         /* Respond Wide */
2420                         *bus_width = MSG_EXT_WDTR_BUS_16_BIT;
2421                         break;
2422                 }
2423                 /* FALLTHROUGH */
2424         case MSG_EXT_WDTR_BUS_8_BIT:
2425                 *bus_width = MSG_EXT_WDTR_BUS_8_BIT;
2426                 break;
2427         }
2428         if (tinfo != NULL) {
2429                 if (role == ROLE_TARGET)
2430                         *bus_width = min((u_int)tinfo->user.width, *bus_width);
2431                 else
2432                         *bus_width = min((u_int)tinfo->goal.width, *bus_width);
2433         }
2434 }
2435
2436 /*
2437  * Update the bitmask of targets for which the controller should
2438  * negotiate with at the next convenient opportunity.  This currently
2439  * means the next time we send the initial identify messages for
2440  * a new transaction.
2441  */
2442 int
2443 ahc_update_neg_request(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
2444                        struct ahc_tmode_tstate *tstate,
2445                        struct ahc_initiator_tinfo *tinfo, ahc_neg_type neg_type)
2446 {
2447         u_int auto_negotiate_orig;
2448
2449         auto_negotiate_orig = tstate->auto_negotiate;
2450         if (neg_type == AHC_NEG_ALWAYS) {
2451                 /*
2452                  * Force our "current" settings to be
2453                  * unknown so that unless a bus reset
2454                  * occurs the need to renegotiate is
2455                  * recorded persistently.
2456                  */
2457                 if ((ahc->features & AHC_WIDE) != 0)
2458                         tinfo->curr.width = AHC_WIDTH_UNKNOWN;
2459                 tinfo->curr.period = AHC_PERIOD_UNKNOWN;
2460                 tinfo->curr.offset = AHC_OFFSET_UNKNOWN;
2461         }
2462         if (tinfo->curr.period != tinfo->goal.period
2463          || tinfo->curr.width != tinfo->goal.width
2464          || tinfo->curr.offset != tinfo->goal.offset
2465          || tinfo->curr.ppr_options != tinfo->goal.ppr_options
2466          || (neg_type == AHC_NEG_IF_NON_ASYNC
2467           && (tinfo->goal.offset != 0
2468            || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT
2469            || tinfo->goal.ppr_options != 0)))
2470                 tstate->auto_negotiate |= devinfo->target_mask;
2471         else
2472                 tstate->auto_negotiate &= ~devinfo->target_mask;
2473
2474         return (auto_negotiate_orig != tstate->auto_negotiate);
2475 }
2476
2477 /*
2478  * Update the user/goal/curr tables of synchronous negotiation
2479  * parameters as well as, in the case of a current or active update,
2480  * any data structures on the host controller.  In the case of an
2481  * active update, the specified target is currently talking to us on
2482  * the bus, so the transfer parameter update must take effect
2483  * immediately.
2484  */
2485 void
2486 ahc_set_syncrate(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
2487                  const struct ahc_syncrate *syncrate, u_int period,
2488                  u_int offset, u_int ppr_options, u_int type, int paused)
2489 {
2490         struct  ahc_initiator_tinfo *tinfo;
2491         struct  ahc_tmode_tstate *tstate;
2492         u_int   old_period;
2493         u_int   old_offset;
2494         u_int   old_ppr;
2495         int     active;
2496         int     update_needed;
2497
2498         active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE;
2499         update_needed = 0;
2500
2501         if (syncrate == NULL) {
2502                 period = 0;
2503                 offset = 0;
2504         }
2505
2506         tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
2507                                     devinfo->target, &tstate);
2508
2509         if ((type & AHC_TRANS_USER) != 0) {
2510                 tinfo->user.period = period;
2511                 tinfo->user.offset = offset;
2512                 tinfo->user.ppr_options = ppr_options;
2513         }
2514
2515         if ((type & AHC_TRANS_GOAL) != 0) {
2516                 tinfo->goal.period = period;
2517                 tinfo->goal.offset = offset;
2518                 tinfo->goal.ppr_options = ppr_options;
2519         }
2520
2521         old_period = tinfo->curr.period;
2522         old_offset = tinfo->curr.offset;
2523         old_ppr    = tinfo->curr.ppr_options;
2524
2525         if ((type & AHC_TRANS_CUR) != 0
2526          && (old_period != period
2527           || old_offset != offset
2528           || old_ppr != ppr_options)) {
2529                 u_int   scsirate;
2530
2531                 update_needed++;
2532                 scsirate = tinfo->scsirate;
2533                 if ((ahc->features & AHC_ULTRA2) != 0) {
2534
2535                         scsirate &= ~(SXFR_ULTRA2|SINGLE_EDGE|ENABLE_CRC);
2536                         if (syncrate != NULL) {
2537                                 scsirate |= syncrate->sxfr_u2;
2538                                 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0)
2539                                         scsirate |= ENABLE_CRC;
2540                                 else
2541                                         scsirate |= SINGLE_EDGE;
2542                         }
2543                 } else {
2544
2545                         scsirate &= ~(SXFR|SOFS);
2546                         /*
2547                          * Ensure Ultra mode is set properly for
2548                          * this target.
2549                          */
2550                         tstate->ultraenb &= ~devinfo->target_mask;
2551                         if (syncrate != NULL) {
2552                                 if (syncrate->sxfr & ULTRA_SXFR) {
2553                                         tstate->ultraenb |=
2554                                                 devinfo->target_mask;
2555                                 }
2556                                 scsirate |= syncrate->sxfr & SXFR;
2557                                 scsirate |= offset & SOFS;
2558                         }
2559                         if (active) {
2560                                 u_int sxfrctl0;
2561
2562                                 sxfrctl0 = ahc_inb(ahc, SXFRCTL0);
2563                                 sxfrctl0 &= ~FAST20;
2564                                 if (tstate->ultraenb & devinfo->target_mask)
2565                                         sxfrctl0 |= FAST20;
2566                                 ahc_outb(ahc, SXFRCTL0, sxfrctl0);
2567                         }
2568                 }
2569                 if (active) {
2570                         ahc_outb(ahc, SCSIRATE, scsirate);
2571                         if ((ahc->features & AHC_ULTRA2) != 0)
2572                                 ahc_outb(ahc, SCSIOFFSET, offset);
2573                 }
2574
2575                 tinfo->scsirate = scsirate;
2576                 tinfo->curr.period = period;
2577                 tinfo->curr.offset = offset;
2578                 tinfo->curr.ppr_options = ppr_options;
2579
2580                 ahc_send_async(ahc, devinfo->channel, devinfo->target,
2581                                CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
2582                 if (bootverbose) {
2583                         if (offset != 0) {
2584                                 printk("%s: target %d synchronous at %sMHz%s, "
2585                                        "offset = 0x%x\n", ahc_name(ahc),
2586                                        devinfo->target, syncrate->rate,
2587                                        (ppr_options & MSG_EXT_PPR_DT_REQ)
2588                                        ? " DT" : "", offset);
2589                         } else {
2590                                 printk("%s: target %d using "
2591                                        "asynchronous transfers\n",
2592                                        ahc_name(ahc), devinfo->target);
2593                         }
2594                 }
2595         }
2596
2597         update_needed += ahc_update_neg_request(ahc, devinfo, tstate,
2598                                                 tinfo, AHC_NEG_TO_GOAL);
2599
2600         if (update_needed)
2601                 ahc_update_pending_scbs(ahc);
2602 }
2603
2604 /*
2605  * Update the user/goal/curr tables of wide negotiation
2606  * parameters as well as, in the case of a current or active update,
2607  * any data structures on the host controller.  In the case of an
2608  * active update, the specified target is currently talking to us on
2609  * the bus, so the transfer parameter update must take effect
2610  * immediately.
2611  */
2612 void
2613 ahc_set_width(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
2614               u_int width, u_int type, int paused)
2615 {
2616         struct  ahc_initiator_tinfo *tinfo;
2617         struct  ahc_tmode_tstate *tstate;
2618         u_int   oldwidth;
2619         int     active;
2620         int     update_needed;
2621
2622         active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE;
2623         update_needed = 0;
2624         tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
2625                                     devinfo->target, &tstate);
2626
2627         if ((type & AHC_TRANS_USER) != 0)
2628                 tinfo->user.width = width;
2629
2630         if ((type & AHC_TRANS_GOAL) != 0)
2631                 tinfo->goal.width = width;
2632
2633         oldwidth = tinfo->curr.width;
2634         if ((type & AHC_TRANS_CUR) != 0 && oldwidth != width) {
2635                 u_int   scsirate;
2636
2637                 update_needed++;
2638                 scsirate =  tinfo->scsirate;
2639                 scsirate &= ~WIDEXFER;
2640                 if (width == MSG_EXT_WDTR_BUS_16_BIT)
2641                         scsirate |= WIDEXFER;
2642
2643                 tinfo->scsirate = scsirate;
2644
2645                 if (active)
2646                         ahc_outb(ahc, SCSIRATE, scsirate);
2647
2648                 tinfo->curr.width = width;
2649
2650                 ahc_send_async(ahc, devinfo->channel, devinfo->target,
2651                                CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
2652                 if (bootverbose) {
2653                         printk("%s: target %d using %dbit transfers\n",
2654                                ahc_name(ahc), devinfo->target,
2655                                8 * (0x01 << width));
2656                 }
2657         }
2658
2659         update_needed += ahc_update_neg_request(ahc, devinfo, tstate,
2660                                                 tinfo, AHC_NEG_TO_GOAL);
2661         if (update_needed)
2662                 ahc_update_pending_scbs(ahc);
2663 }
2664
2665 /*
2666  * Update the current state of tagged queuing for a given target.
2667  */
2668 static void
2669 ahc_set_tags(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
2670              struct ahc_devinfo *devinfo, ahc_queue_alg alg)
2671 {
2672         struct scsi_device *sdev = cmd->device;
2673
2674         ahc_platform_set_tags(ahc, sdev, devinfo, alg);
2675         ahc_send_async(ahc, devinfo->channel, devinfo->target,
2676                        devinfo->lun, AC_TRANSFER_NEG);
2677 }
2678
2679 /*
2680  * When the transfer settings for a connection change, update any
2681  * in-transit SCBs to contain the new data so the hardware will
2682  * be set correctly during future (re)selections.
2683  */
2684 static void
2685 ahc_update_pending_scbs(struct ahc_softc *ahc)
2686 {
2687         struct  scb *pending_scb;
2688         int     pending_scb_count;
2689         int     i;
2690         int     paused;
2691         u_int   saved_scbptr;
2692
2693         /*
2694          * Traverse the pending SCB list and ensure that all of the
2695          * SCBs there have the proper settings.
2696          */
2697         pending_scb_count = 0;
2698         LIST_FOREACH(pending_scb, &ahc->pending_scbs, pending_links) {
2699                 struct ahc_devinfo devinfo;
2700                 struct hardware_scb *pending_hscb;
2701                 struct ahc_initiator_tinfo *tinfo;
2702                 struct ahc_tmode_tstate *tstate;
2703
2704                 ahc_scb_devinfo(ahc, &devinfo, pending_scb);
2705                 tinfo = ahc_fetch_transinfo(ahc, devinfo.channel,
2706                                             devinfo.our_scsiid,
2707                                             devinfo.target, &tstate);
2708                 pending_hscb = pending_scb->hscb;
2709                 pending_hscb->control &= ~ULTRAENB;
2710                 if ((tstate->ultraenb & devinfo.target_mask) != 0)
2711                         pending_hscb->control |= ULTRAENB;
2712                 pending_hscb->scsirate = tinfo->scsirate;
2713                 pending_hscb->scsioffset = tinfo->curr.offset;
2714                 if ((tstate->auto_negotiate & devinfo.target_mask) == 0
2715                  && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) {
2716                         pending_scb->flags &= ~SCB_AUTO_NEGOTIATE;
2717                         pending_hscb->control &= ~MK_MESSAGE;
2718                 }
2719                 ahc_sync_scb(ahc, pending_scb,
2720                              BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
2721                 pending_scb_count++;
2722         }
2723
2724         if (pending_scb_count == 0)
2725                 return;
2726
2727         if (ahc_is_paused(ahc)) {
2728                 paused = 1;
2729         } else {
2730                 paused = 0;
2731                 ahc_pause(ahc);
2732         }
2733
2734         saved_scbptr = ahc_inb(ahc, SCBPTR);
2735         /* Ensure that the hscbs down on the card match the new information */
2736         for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
2737                 struct  hardware_scb *pending_hscb;
2738                 u_int   control;
2739                 u_int   scb_tag;
2740
2741                 ahc_outb(ahc, SCBPTR, i);
2742                 scb_tag = ahc_inb(ahc, SCB_TAG);
2743                 pending_scb = ahc_lookup_scb(ahc, scb_tag);
2744                 if (pending_scb == NULL)
2745                         continue;
2746
2747                 pending_hscb = pending_scb->hscb;
2748                 control = ahc_inb(ahc, SCB_CONTROL);
2749                 control &= ~(ULTRAENB|MK_MESSAGE);
2750                 control |= pending_hscb->control & (ULTRAENB|MK_MESSAGE);
2751                 ahc_outb(ahc, SCB_CONTROL, control);
2752                 ahc_outb(ahc, SCB_SCSIRATE, pending_hscb->scsirate);
2753                 ahc_outb(ahc, SCB_SCSIOFFSET, pending_hscb->scsioffset);
2754         }
2755         ahc_outb(ahc, SCBPTR, saved_scbptr);
2756
2757         if (paused == 0)
2758                 ahc_unpause(ahc);
2759 }
2760
2761 /**************************** Pathing Information *****************************/
2762 static void
2763 ahc_fetch_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
2764 {
2765         u_int   saved_scsiid;
2766         role_t  role;
2767         int     our_id;
2768
2769         if (ahc_inb(ahc, SSTAT0) & TARGET)
2770                 role = ROLE_TARGET;
2771         else
2772                 role = ROLE_INITIATOR;
2773
2774         if (role == ROLE_TARGET
2775          && (ahc->features & AHC_MULTI_TID) != 0
2776          && (ahc_inb(ahc, SEQ_FLAGS)
2777            & (CMDPHASE_PENDING|TARG_CMD_PENDING|NO_DISCONNECT)) != 0) {
2778                 /* We were selected, so pull our id from TARGIDIN */
2779                 our_id = ahc_inb(ahc, TARGIDIN) & OID;
2780         } else if ((ahc->features & AHC_ULTRA2) != 0)
2781                 our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID;
2782         else
2783                 our_id = ahc_inb(ahc, SCSIID) & OID;
2784
2785         saved_scsiid = ahc_inb(ahc, SAVED_SCSIID);
2786         ahc_compile_devinfo(devinfo,
2787                             our_id,
2788                             SCSIID_TARGET(ahc, saved_scsiid),
2789                             ahc_inb(ahc, SAVED_LUN),
2790                             SCSIID_CHANNEL(ahc, saved_scsiid),
2791                             role);
2792 }
2793
2794 static const struct ahc_phase_table_entry*
2795 ahc_lookup_phase_entry(int phase)
2796 {
2797         const struct ahc_phase_table_entry *entry;
2798         const struct ahc_phase_table_entry *last_entry;
2799
2800         /*
2801          * num_phases doesn't include the default entry which
2802          * will be returned if the phase doesn't match.
2803          */
2804         last_entry = &ahc_phase_table[num_phases];
2805         for (entry = ahc_phase_table; entry < last_entry; entry++) {
2806                 if (phase == entry->phase)
2807                         break;
2808         }
2809         return (entry);
2810 }
2811
2812 void
2813 ahc_compile_devinfo(struct ahc_devinfo *devinfo, u_int our_id, u_int target,
2814                     u_int lun, char channel, role_t role)
2815 {
2816         devinfo->our_scsiid = our_id;
2817         devinfo->target = target;
2818         devinfo->lun = lun;
2819         devinfo->target_offset = target;
2820         devinfo->channel = channel;
2821         devinfo->role = role;
2822         if (channel == 'B')
2823                 devinfo->target_offset += 8;
2824         devinfo->target_mask = (0x01 << devinfo->target_offset);
2825 }
2826
2827 void
2828 ahc_print_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
2829 {
2830         printk("%s:%c:%d:%d: ", ahc_name(ahc), devinfo->channel,
2831                devinfo->target, devinfo->lun);
2832 }
2833
2834 static void
2835 ahc_scb_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
2836                 struct scb *scb)
2837 {
2838         role_t  role;
2839         int     our_id;
2840
2841         our_id = SCSIID_OUR_ID(scb->hscb->scsiid);
2842         role = ROLE_INITIATOR;
2843         if ((scb->flags & SCB_TARGET_SCB) != 0)
2844                 role = ROLE_TARGET;
2845         ahc_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahc, scb),
2846                             SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahc, scb), role);
2847 }
2848
2849
2850 /************************ Message Phase Processing ****************************/
2851 static void
2852 ahc_assert_atn(struct ahc_softc *ahc)
2853 {
2854         u_int scsisigo;
2855
2856         scsisigo = ATNO;
2857         if ((ahc->features & AHC_DT) == 0)
2858                 scsisigo |= ahc_inb(ahc, SCSISIGI);
2859         ahc_outb(ahc, SCSISIGO, scsisigo);
2860 }
2861
2862 /*
2863  * When an initiator transaction with the MK_MESSAGE flag either reconnects
2864  * or enters the initial message out phase, we are interrupted.  Fill our
2865  * outgoing message buffer with the appropriate message and beging handing
2866  * the message phase(s) manually.
2867  */
2868 static void
2869 ahc_setup_initiator_msgout(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
2870                            struct scb *scb)
2871 {
2872         /*
2873          * To facilitate adding multiple messages together,
2874          * each routine should increment the index and len
2875          * variables instead of setting them explicitly.
2876          */
2877         ahc->msgout_index = 0;
2878         ahc->msgout_len = 0;
2879
2880         if ((scb->flags & SCB_DEVICE_RESET) == 0
2881          && ahc_inb(ahc, MSG_OUT) == MSG_IDENTIFYFLAG) {
2882                 u_int identify_msg;
2883
2884                 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb);
2885                 if ((scb->hscb->control & DISCENB) != 0)
2886                         identify_msg |= MSG_IDENTIFY_DISCFLAG;
2887                 ahc->msgout_buf[ahc->msgout_index++] = identify_msg;
2888                 ahc->msgout_len++;
2889
2890                 if ((scb->hscb->control & TAG_ENB) != 0) {
2891                         ahc->msgout_buf[ahc->msgout_index++] =
2892                             scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE);
2893                         ahc->msgout_buf[ahc->msgout_index++] = scb->hscb->tag;
2894                         ahc->msgout_len += 2;
2895                 }
2896         }
2897
2898         if (scb->flags & SCB_DEVICE_RESET) {
2899                 ahc->msgout_buf[ahc->msgout_index++] = MSG_BUS_DEV_RESET;
2900                 ahc->msgout_len++;
2901                 ahc_print_path(ahc, scb);
2902                 printk("Bus Device Reset Message Sent\n");
2903                 /*
2904                  * Clear our selection hardware in advance of
2905                  * the busfree.  We may have an entry in the waiting
2906                  * Q for this target, and we don't want to go about
2907                  * selecting while we handle the busfree and blow it
2908                  * away.
2909                  */
2910                 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO));
2911         } else if ((scb->flags & SCB_ABORT) != 0) {
2912                 if ((scb->hscb->control & TAG_ENB) != 0)
2913                         ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT_TAG;
2914                 else
2915                         ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT;
2916                 ahc->msgout_len++;
2917                 ahc_print_path(ahc, scb);
2918                 printk("Abort%s Message Sent\n",
2919                        (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : "");
2920                 /*
2921                  * Clear our selection hardware in advance of
2922                  * the busfree.  We may have an entry in the waiting
2923                  * Q for this target, and we don't want to go about
2924                  * selecting while we handle the busfree and blow it
2925                  * away.
2926                  */
2927                 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO));
2928         } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) {
2929                 ahc_build_transfer_msg(ahc, devinfo);
2930         } else {
2931                 printk("ahc_intr: AWAITING_MSG for an SCB that "
2932                        "does not have a waiting message\n");
2933                 printk("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid,
2934                        devinfo->target_mask);
2935                 panic("SCB = %d, SCB Control = %x, MSG_OUT = %x "
2936                       "SCB flags = %x", scb->hscb->tag, scb->hscb->control,
2937                       ahc_inb(ahc, MSG_OUT), scb->flags);
2938         }
2939
2940         /*
2941          * Clear the MK_MESSAGE flag from the SCB so we aren't
2942          * asked to send this message again.
2943          */
2944         ahc_outb(ahc, SCB_CONTROL, ahc_inb(ahc, SCB_CONTROL) & ~MK_MESSAGE);
2945         scb->hscb->control &= ~MK_MESSAGE;
2946         ahc->msgout_index = 0;
2947         ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
2948 }
2949
2950 /*
2951  * Build an appropriate transfer negotiation message for the
2952  * currently active target.
2953  */
2954 static void
2955 ahc_build_transfer_msg(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
2956 {
2957         /*
2958          * We need to initiate transfer negotiations.
2959          * If our current and goal settings are identical,
2960          * we want to renegotiate due to a check condition.
2961          */
2962         struct  ahc_initiator_tinfo *tinfo;
2963         struct  ahc_tmode_tstate *tstate;
2964         const struct ahc_syncrate *rate;
2965         int     dowide;
2966         int     dosync;
2967         int     doppr;
2968         u_int   period;
2969         u_int   ppr_options;
2970         u_int   offset;
2971
2972         tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
2973                                     devinfo->target, &tstate);
2974         /*
2975          * Filter our period based on the current connection.
2976          * If we can't perform DT transfers on this segment (not in LVD
2977          * mode for instance), then our decision to issue a PPR message
2978          * may change.
2979          */
2980         period = tinfo->goal.period;
2981         offset = tinfo->goal.offset;
2982         ppr_options = tinfo->goal.ppr_options;
2983         /* Target initiated PPR is not allowed in the SCSI spec */
2984         if (devinfo->role == ROLE_TARGET)
2985                 ppr_options = 0;
2986         rate = ahc_devlimited_syncrate(ahc, tinfo, &period,
2987                                        &ppr_options, devinfo->role);
2988         dowide = tinfo->curr.width != tinfo->goal.width;
2989         dosync = tinfo->curr.offset != offset || tinfo->curr.period != period;
2990         /*
2991          * Only use PPR if we have options that need it, even if the device
2992          * claims to support it.  There might be an expander in the way
2993          * that doesn't.
2994          */
2995         doppr = ppr_options != 0;
2996
2997         if (!dowide && !dosync && !doppr) {
2998                 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT;
2999                 dosync = tinfo->goal.offset != 0;
3000         }
3001
3002         if (!dowide && !dosync && !doppr) {
3003                 /*
3004                  * Force async with a WDTR message if we have a wide bus,
3005                  * or just issue an SDTR with a 0 offset.
3006                  */
3007                 if ((ahc->features & AHC_WIDE) != 0)
3008                         dowide = 1;
3009                 else
3010                         dosync = 1;
3011
3012                 if (bootverbose) {
3013                         ahc_print_devinfo(ahc, devinfo);
3014                         printk("Ensuring async\n");
3015                 }
3016         }
3017
3018         /* Target initiated PPR is not allowed in the SCSI spec */
3019         if (devinfo->role == ROLE_TARGET)
3020                 doppr = 0;
3021
3022         /*
3023          * Both the PPR message and SDTR message require the
3024          * goal syncrate to be limited to what the target device
3025          * is capable of handling (based on whether an LVD->SE
3026          * expander is on the bus), so combine these two cases.
3027          * Regardless, guarantee that if we are using WDTR and SDTR
3028          * messages that WDTR comes first.
3029          */
3030         if (doppr || (dosync && !dowide)) {
3031
3032                 offset = tinfo->goal.offset;
3033                 ahc_validate_offset(ahc, tinfo, rate, &offset,
3034                                     doppr ? tinfo->goal.width
3035                                           : tinfo->curr.width,
3036                                     devinfo->role);
3037                 if (doppr) {
3038                         ahc_construct_ppr(ahc, devinfo, period, offset,
3039                                           tinfo->goal.width, ppr_options);
3040                 } else {
3041                         ahc_construct_sdtr(ahc, devinfo, period, offset);
3042                 }
3043         } else {
3044                 ahc_construct_wdtr(ahc, devinfo, tinfo->goal.width);
3045         }
3046 }
3047
3048 /*
3049  * Build a synchronous negotiation message in our message
3050  * buffer based on the input parameters.
3051  */
3052 static void
3053 ahc_construct_sdtr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
3054                    u_int period, u_int offset)
3055 {
3056         if (offset == 0)
3057                 period = AHC_ASYNC_XFER_PERIOD;
3058         ahc->msgout_index += spi_populate_sync_msg(
3059                         ahc->msgout_buf + ahc->msgout_index, period, offset);
3060         ahc->msgout_len += 5;
3061         if (bootverbose) {
3062                 printk("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n",
3063                        ahc_name(ahc), devinfo->channel, devinfo->target,
3064                        devinfo->lun, period, offset);
3065         }
3066 }
3067
3068 /*
3069  * Build a wide negotiation message in our message
3070  * buffer based on the input parameters.
3071  */
3072 static void
3073 ahc_construct_wdtr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
3074                    u_int bus_width)
3075 {
3076         ahc->msgout_index += spi_populate_width_msg(
3077                         ahc->msgout_buf + ahc->msgout_index, bus_width);
3078         ahc->msgout_len += 4;
3079         if (bootverbose) {
3080                 printk("(%s:%c:%d:%d): Sending WDTR %x\n",
3081                        ahc_name(ahc), devinfo->channel, devinfo->target,
3082                        devinfo->lun, bus_width);
3083         }
3084 }
3085
3086 /*
3087  * Build a parallel protocol request message in our message
3088  * buffer based on the input parameters.
3089  */
3090 static void
3091 ahc_construct_ppr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
3092                   u_int period, u_int offset, u_int bus_width,
3093                   u_int ppr_options)
3094 {
3095         if (offset == 0)
3096                 period = AHC_ASYNC_XFER_PERIOD;
3097         ahc->msgout_index += spi_populate_ppr_msg(
3098                         ahc->msgout_buf + ahc->msgout_index, period, offset,
3099                         bus_width, ppr_options);
3100         ahc->msgout_len += 8;
3101         if (bootverbose) {
3102                 printk("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, "
3103                        "offset %x, ppr_options %x\n", ahc_name(ahc),
3104                        devinfo->channel, devinfo->target, devinfo->lun,
3105                        bus_width, period, offset, ppr_options);
3106         }
3107 }
3108
3109 /*
3110  * Clear any active message state.
3111  */
3112 static void
3113 ahc_clear_msg_state(struct ahc_softc *ahc)
3114 {
3115         ahc->msgout_len = 0;
3116         ahc->msgin_index = 0;
3117         ahc->msg_type = MSG_TYPE_NONE;
3118         if ((ahc_inb(ahc, SCSISIGI) & ATNI) != 0) {
3119                 /*
3120                  * The target didn't care to respond to our
3121                  * message request, so clear ATN.
3122                  */
3123                 ahc_outb(ahc, CLRSINT1, CLRATNO);
3124         }
3125         ahc_outb(ahc, MSG_OUT, MSG_NOOP);
3126         ahc_outb(ahc, SEQ_FLAGS2,
3127                  ahc_inb(ahc, SEQ_FLAGS2) & ~TARGET_MSG_PENDING);
3128 }
3129
3130 static void
3131 ahc_handle_proto_violation(struct ahc_softc *ahc)
3132 {
3133         struct  ahc_devinfo devinfo;
3134         struct  scb *scb;
3135         u_int   scbid;
3136         u_int   seq_flags;
3137         u_int   curphase;
3138         u_int   lastphase;
3139         int     found;
3140
3141         ahc_fetch_devinfo(ahc, &devinfo);
3142         scbid = ahc_inb(ahc, SCB_TAG);
3143         scb = ahc_lookup_scb(ahc, scbid);
3144         seq_flags = ahc_inb(ahc, SEQ_FLAGS);
3145         curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
3146         lastphase = ahc_inb(ahc, LASTPHASE);
3147         if ((seq_flags & NOT_IDENTIFIED) != 0) {
3148
3149                 /*
3150                  * The reconnecting target either did not send an
3151                  * identify message, or did, but we didn't find an SCB
3152                  * to match.
3153                  */
3154                 ahc_print_devinfo(ahc, &devinfo);
3155                 printk("Target did not send an IDENTIFY message. "
3156                        "LASTPHASE = 0x%x.\n", lastphase);
3157                 scb = NULL;
3158         } else if (scb == NULL) {
3159                 /*
3160                  * We don't seem to have an SCB active for this
3161                  * transaction.  Print an error and reset the bus.
3162                  */
3163                 ahc_print_devinfo(ahc, &devinfo);
3164                 printk("No SCB found during protocol violation\n");
3165                 goto proto_violation_reset;
3166         } else {
3167                 ahc_set_transaction_status(scb, CAM_SEQUENCE_FAIL);
3168                 if ((seq_flags & NO_CDB_SENT) != 0) {
3169                         ahc_print_path(ahc, scb);
3170                         printk("No or incomplete CDB sent to device.\n");
3171                 } else if ((ahc_inb(ahc, SCB_CONTROL) & STATUS_RCVD) == 0) {
3172                         /*
3173                          * The target never bothered to provide status to
3174                          * us prior to completing the command.  Since we don't
3175                          * know the disposition of this command, we must attempt
3176                          * to abort it.  Assert ATN and prepare to send an abort
3177                          * message.
3178                          */
3179                         ahc_print_path(ahc, scb);
3180                         printk("Completed command without status.\n");
3181                 } else {
3182                         ahc_print_path(ahc, scb);
3183                         printk("Unknown protocol violation.\n");
3184                         ahc_dump_card_state(ahc);
3185                 }
3186         }
3187         if ((lastphase & ~P_DATAIN_DT) == 0
3188          || lastphase == P_COMMAND) {
3189 proto_violation_reset:
3190                 /*
3191                  * Target either went directly to data/command
3192                  * phase or didn't respond to our ATN.
3193                  * The only safe thing to do is to blow
3194                  * it away with a bus reset.
3195                  */
3196                 found = ahc_reset_channel(ahc, 'A', TRUE);
3197                 printk("%s: Issued Channel %c Bus Reset. "
3198                        "%d SCBs aborted\n", ahc_name(ahc), 'A', found);
3199         } else {
3200                 /*
3201                  * Leave the selection hardware off in case
3202                  * this abort attempt will affect yet to
3203                  * be sent commands.
3204                  */
3205                 ahc_outb(ahc, SCSISEQ,
3206                          ahc_inb(ahc, SCSISEQ) & ~ENSELO);
3207                 ahc_assert_atn(ahc);
3208                 ahc_outb(ahc, MSG_OUT, HOST_MSG);
3209                 if (scb == NULL) {
3210                         ahc_print_devinfo(ahc, &devinfo);
3211                         ahc->msgout_buf[0] = MSG_ABORT_TASK;
3212                         ahc->msgout_len = 1;
3213                         ahc->msgout_index = 0;
3214                         ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3215                 } else {
3216                         ahc_print_path(ahc, scb);
3217                         scb->flags |= SCB_ABORT;
3218                 }
3219                 printk("Protocol violation %s.  Attempting to abort.\n",
3220                        ahc_lookup_phase_entry(curphase)->phasemsg);
3221         }
3222 }
3223
3224 /*
3225  * Manual message loop handler.
3226  */
3227 static void
3228 ahc_handle_message_phase(struct ahc_softc *ahc)
3229 {
3230         struct  ahc_devinfo devinfo;
3231         u_int   bus_phase;
3232         int     end_session;
3233
3234         ahc_fetch_devinfo(ahc, &devinfo);
3235         end_session = FALSE;
3236         bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
3237
3238 reswitch:
3239         switch (ahc->msg_type) {
3240         case MSG_TYPE_INITIATOR_MSGOUT:
3241         {
3242                 int lastbyte;
3243                 int phasemis;
3244                 int msgdone;
3245
3246                 if (ahc->msgout_len == 0)
3247                         panic("HOST_MSG_LOOP interrupt with no active message");
3248
3249 #ifdef AHC_DEBUG
3250                 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
3251                         ahc_print_devinfo(ahc, &devinfo);
3252                         printk("INITIATOR_MSG_OUT");
3253                 }
3254 #endif
3255                 phasemis = bus_phase != P_MESGOUT;
3256                 if (phasemis) {
3257 #ifdef AHC_DEBUG
3258                         if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
3259                                 printk(" PHASEMIS %s\n",
3260                                        ahc_lookup_phase_entry(bus_phase)
3261                                                              ->phasemsg);
3262                         }
3263 #endif
3264                         if (bus_phase == P_MESGIN) {
3265                                 /*
3266                                  * Change gears and see if
3267                                  * this messages is of interest to
3268                                  * us or should be passed back to
3269                                  * the sequencer.
3270                                  */
3271                                 ahc_outb(ahc, CLRSINT1, CLRATNO);
3272                                 ahc->send_msg_perror = FALSE;
3273                                 ahc->msg_type = MSG_TYPE_INITIATOR_MSGIN;
3274                                 ahc->msgin_index = 0;
3275                                 goto reswitch;
3276                         }
3277                         end_session = TRUE;
3278                         break;
3279                 }
3280
3281                 if (ahc->send_msg_perror) {
3282                         ahc_outb(ahc, CLRSINT1, CLRATNO);
3283                         ahc_outb(ahc, CLRSINT1, CLRREQINIT);
3284 #ifdef AHC_DEBUG
3285                         if ((ahc_debug & AHC_SHOW_MESSAGES) != 0)
3286                                 printk(" byte 0x%x\n", ahc->send_msg_perror);
3287 #endif
3288                         ahc_outb(ahc, SCSIDATL, MSG_PARITY_ERROR);
3289                         break;
3290                 }
3291
3292                 msgdone = ahc->msgout_index == ahc->msgout_len;
3293                 if (msgdone) {
3294                         /*
3295                          * The target has requested a retry.
3296                          * Re-assert ATN, reset our message index to
3297                          * 0, and try again.
3298                          */
3299                         ahc->msgout_index = 0;
3300                         ahc_assert_atn(ahc);
3301                 }
3302
3303                 lastbyte = ahc->msgout_index == (ahc->msgout_len - 1);
3304                 if (lastbyte) {
3305                         /* Last byte is signified by dropping ATN */
3306                         ahc_outb(ahc, CLRSINT1, CLRATNO);
3307                 }
3308
3309                 /*
3310                  * Clear our interrupt status and present
3311                  * the next byte on the bus.
3312                  */
3313                 ahc_outb(ahc, CLRSINT1, CLRREQINIT);
3314 #ifdef AHC_DEBUG
3315                 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0)
3316                         printk(" byte 0x%x\n",
3317                                ahc->msgout_buf[ahc->msgout_index]);
3318 #endif
3319                 ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]);
3320                 break;
3321         }
3322         case MSG_TYPE_INITIATOR_MSGIN:
3323         {
3324                 int phasemis;
3325                 int message_done;
3326
3327 #ifdef AHC_DEBUG
3328                 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
3329                         ahc_print_devinfo(ahc, &devinfo);
3330                         printk("INITIATOR_MSG_IN");
3331                 }
3332 #endif
3333                 phasemis = bus_phase != P_MESGIN;
3334                 if (phasemis) {
3335 #ifdef AHC_DEBUG
3336                         if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
3337                                 printk(" PHASEMIS %s\n",
3338                                        ahc_lookup_phase_entry(bus_phase)
3339                                                              ->phasemsg);
3340                         }
3341 #endif
3342                         ahc->msgin_index = 0;
3343                         if (bus_phase == P_MESGOUT
3344                          && (ahc->send_msg_perror == TRUE
3345                           || (ahc->msgout_len != 0
3346                            && ahc->msgout_index == 0))) {
3347                                 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3348                                 goto reswitch;
3349                         }
3350                         end_session = TRUE;
3351                         break;
3352                 }
3353
3354                 /* Pull the byte in without acking it */
3355                 ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIBUSL);
3356 #ifdef AHC_DEBUG
3357                 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0)
3358                         printk(" byte 0x%x\n",
3359                                ahc->msgin_buf[ahc->msgin_index]);
3360 #endif
3361
3362                 message_done = ahc_parse_msg(ahc, &devinfo);
3363
3364                 if (message_done) {
3365                         /*
3366                          * Clear our incoming message buffer in case there
3367                          * is another message following this one.
3368                          */
3369                         ahc->msgin_index = 0;
3370
3371                         /*
3372                          * If this message illicited a response,
3373                          * assert ATN so the target takes us to the
3374                          * message out phase.
3375                          */
3376                         if (ahc->msgout_len != 0) {
3377 #ifdef AHC_DEBUG
3378                                 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
3379                                         ahc_print_devinfo(ahc, &devinfo);
3380                                         printk("Asserting ATN for response\n");
3381                                 }
3382 #endif
3383                                 ahc_assert_atn(ahc);
3384                         }
3385                 } else
3386                         ahc->msgin_index++;
3387
3388                 if (message_done == MSGLOOP_TERMINATED) {
3389                         end_session = TRUE;
3390                 } else {
3391                         /* Ack the byte */
3392                         ahc_outb(ahc, CLRSINT1, CLRREQINIT);
3393                         ahc_inb(ahc, SCSIDATL);
3394                 }
3395                 break;
3396         }
3397         case MSG_TYPE_TARGET_MSGIN:
3398         {
3399                 int msgdone;
3400                 int msgout_request;
3401
3402                 if (ahc->msgout_len == 0)
3403                         panic("Target MSGIN with no active message");
3404
3405                 /*
3406                  * If we interrupted a mesgout session, the initiator
3407                  * will not know this until our first REQ.  So, we
3408                  * only honor mesgout requests after we've sent our
3409                  * first byte.
3410                  */
3411                 if ((ahc_inb(ahc, SCSISIGI) & ATNI) != 0
3412                  && ahc->msgout_index > 0)
3413                         msgout_request = TRUE;
3414                 else
3415                         msgout_request = FALSE;
3416
3417                 if (msgout_request) {
3418
3419                         /*
3420                          * Change gears and see if
3421                          * this messages is of interest to
3422                          * us or should be passed back to
3423                          * the sequencer.
3424                          */
3425                         ahc->msg_type = MSG_TYPE_TARGET_MSGOUT;
3426                         ahc_outb(ahc, SCSISIGO, P_MESGOUT | BSYO);
3427                         ahc->msgin_index = 0;
3428                         /* Dummy read to REQ for first byte */
3429                         ahc_inb(ahc, SCSIDATL);
3430                         ahc_outb(ahc, SXFRCTL0,
3431                                  ahc_inb(ahc, SXFRCTL0) | SPIOEN);
3432                         break;
3433                 }
3434
3435                 msgdone = ahc->msgout_index == ahc->msgout_len;
3436                 if (msgdone) {
3437                         ahc_outb(ahc, SXFRCTL0,
3438                                  ahc_inb(ahc, SXFRCTL0) & ~SPIOEN);
3439                         end_session = TRUE;
3440                         break;
3441                 }
3442
3443                 /*
3444                  * Present the next byte on the bus.
3445                  */
3446                 ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) | SPIOEN);
3447                 ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]);
3448                 break;
3449         }
3450         case MSG_TYPE_TARGET_MSGOUT:
3451         {
3452                 int lastbyte;
3453                 int msgdone;
3454
3455                 /*
3456                  * The initiator signals that this is
3457                  * the last byte by dropping ATN.
3458                  */
3459                 lastbyte = (ahc_inb(ahc, SCSISIGI) & ATNI) == 0;
3460
3461                 /*
3462                  * Read the latched byte, but turn off SPIOEN first
3463                  * so that we don't inadvertently cause a REQ for the
3464                  * next byte.
3465                  */
3466                 ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) & ~SPIOEN);
3467                 ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIDATL);
3468                 msgdone = ahc_parse_msg(ahc, &devinfo);
3469                 if (msgdone == MSGLOOP_TERMINATED) {
3470                         /*
3471                          * The message is *really* done in that it caused
3472                          * us to go to bus free.  The sequencer has already
3473                          * been reset at this point, so pull the ejection
3474                          * handle.
3475                          */
3476                         return;
3477                 }
3478
3479                 ahc->msgin_index++;
3480
3481                 /*
3482                  * XXX Read spec about initiator dropping ATN too soon
3483                  *     and use msgdone to detect it.
3484                  */
3485                 if (msgdone == MSGLOOP_MSGCOMPLETE) {
3486                         ahc->msgin_index = 0;
3487
3488                         /*
3489                          * If this message illicited a response, transition
3490                          * to the Message in phase and send it.
3491                          */
3492                         if (ahc->msgout_len != 0) {
3493                                 ahc_outb(ahc, SCSISIGO, P_MESGIN | BSYO);
3494                                 ahc_outb(ahc, SXFRCTL0,
3495                                          ahc_inb(ahc, SXFRCTL0) | SPIOEN);
3496                                 ahc->msg_type = MSG_TYPE_TARGET_MSGIN;
3497                                 ahc->msgin_index = 0;
3498                                 break;
3499                         }
3500                 }
3501
3502                 if (lastbyte)
3503                         end_session = TRUE;
3504                 else {
3505                         /* Ask for the next byte. */
3506                         ahc_outb(ahc, SXFRCTL0,
3507                                  ahc_inb(ahc, SXFRCTL0) | SPIOEN);
3508                 }
3509
3510                 break;
3511         }
3512         default:
3513                 panic("Unknown REQINIT message type");
3514         }
3515
3516         if (end_session) {
3517                 ahc_clear_msg_state(ahc);
3518                 ahc_outb(ahc, RETURN_1, EXIT_MSG_LOOP);
3519         } else
3520                 ahc_outb(ahc, RETURN_1, CONT_MSG_LOOP);
3521 }
3522
3523 /*
3524  * See if we sent a particular extended message to the target.
3525  * If "full" is true, return true only if the target saw the full
3526  * message.  If "full" is false, return true if the target saw at
3527  * least the first byte of the message.
3528  */
3529 static int
3530 ahc_sent_msg(struct ahc_softc *ahc, ahc_msgtype type, u_int msgval, int full)
3531 {
3532         int found;
3533         u_int index;
3534
3535         found = FALSE;
3536         index = 0;
3537
3538         while (index < ahc->msgout_len) {
3539                 if (ahc->msgout_buf[index] == MSG_EXTENDED) {
3540                         u_int end_index;
3541
3542                         end_index = index + 1 + ahc->msgout_buf[index + 1];
3543                         if (ahc->msgout_buf[index+2] == msgval
3544                          && type == AHCMSG_EXT) {
3545
3546                                 if (full) {
3547                                         if (ahc->msgout_index > end_index)
3548                                                 found = TRUE;
3549                                 } else if (ahc->msgout_index > index)
3550                                         found = TRUE;
3551                         }
3552                         index = end_index;
3553                 } else if (ahc->msgout_buf[index] >= MSG_SIMPLE_TASK
3554                         && ahc->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) {
3555
3556                         /* Skip tag type and tag id or residue param*/
3557                         index += 2;
3558                 } else {
3559                         /* Single byte message */
3560                         if (type == AHCMSG_1B
3561                          && ahc->msgout_buf[index] == msgval
3562                          && ahc->msgout_index > index)
3563                                 found = TRUE;
3564                         index++;
3565                 }
3566
3567                 if (found)
3568                         break;
3569         }
3570         return (found);
3571 }
3572
3573 /*
3574  * Wait for a complete incoming message, parse it, and respond accordingly.
3575  */
3576 static int
3577 ahc_parse_msg(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
3578 {
3579         struct  ahc_initiator_tinfo *tinfo;
3580         struct  ahc_tmode_tstate *tstate;
3581         int     reject;
3582         int     done;
3583         int     response;
3584         u_int   targ_scsirate;
3585
3586         done = MSGLOOP_IN_PROG;
3587         response = FALSE;
3588         reject = FALSE;
3589         tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
3590                                     devinfo->target, &tstate);
3591         targ_scsirate = tinfo->scsirate;
3592
3593         /*
3594          * Parse as much of the message as is available,
3595          * rejecting it if we don't support it.  When
3596          * the entire message is available and has been
3597          * handled, return MSGLOOP_MSGCOMPLETE, indicating
3598          * that we have parsed an entire message.
3599          *
3600          * In the case of extended messages, we accept the length
3601          * byte outright and perform more checking once we know the
3602          * extended message type.
3603          */
3604         switch (ahc->msgin_buf[0]) {
3605         case MSG_DISCONNECT:
3606         case MSG_SAVEDATAPOINTER:
3607         case MSG_CMDCOMPLETE:
3608         case MSG_RESTOREPOINTERS:
3609         case MSG_IGN_WIDE_RESIDUE:
3610                 /*
3611                  * End our message loop as these are messages
3612                  * the sequencer handles on its own.
3613                  */
3614                 done = MSGLOOP_TERMINATED;
3615                 break;
3616         case MSG_MESSAGE_REJECT:
3617                 response = ahc_handle_msg_reject(ahc, devinfo);
3618                 /* FALLTHROUGH */
3619         case MSG_NOOP:
3620                 done = MSGLOOP_MSGCOMPLETE;
3621                 break;
3622         case MSG_EXTENDED:
3623         {
3624                 /* Wait for enough of the message to begin validation */
3625                 if (ahc->msgin_index < 2)
3626                         break;
3627                 switch (ahc->msgin_buf[2]) {
3628                 case MSG_EXT_SDTR:
3629                 {
3630                         const struct ahc_syncrate *syncrate;
3631                         u_int    period;
3632                         u_int    ppr_options;
3633                         u_int    offset;
3634                         u_int    saved_offset;
3635
3636                         if (ahc->msgin_buf[1] != MSG_EXT_SDTR_LEN) {
3637                                 reject = TRUE;
3638                                 break;
3639                         }
3640
3641                         /*
3642                          * Wait until we have both args before validating
3643                          * and acting on this message.
3644                          *
3645                          * Add one to MSG_EXT_SDTR_LEN to account for
3646                          * the extended message preamble.
3647                          */
3648                         if (ahc->msgin_index < (MSG_EXT_SDTR_LEN + 1))
3649                                 break;
3650
3651                         period = ahc->msgin_buf[3];
3652                         ppr_options = 0;
3653                         saved_offset = offset = ahc->msgin_buf[4];
3654                         syncrate = ahc_devlimited_syncrate(ahc, tinfo, &period,
3655                                                            &ppr_options,
3656                                                            devinfo->role);
3657                         ahc_validate_offset(ahc, tinfo, syncrate, &offset,
3658                                             targ_scsirate & WIDEXFER,
3659                                             devinfo->role);
3660                         if (bootverbose) {
3661                                 printk("(%s:%c:%d:%d): Received "
3662                                        "SDTR period %x, offset %x\n\t"
3663                                        "Filtered to period %x, offset %x\n",
3664                                        ahc_name(ahc), devinfo->channel,
3665                                        devinfo->target, devinfo->lun,
3666                                        ahc->msgin_buf[3], saved_offset,
3667                                        period, offset);
3668                         }
3669                         ahc_set_syncrate(ahc, devinfo,
3670                                          syncrate, period,
3671                                          offset, ppr_options,
3672                                          AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
3673                                          /*paused*/TRUE);
3674
3675                         /*
3676                          * See if we initiated Sync Negotiation
3677                          * and didn't have to fall down to async
3678                          * transfers.
3679                          */
3680                         if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_SDTR, TRUE)) {
3681                                 /* We started it */
3682                                 if (saved_offset != offset) {
3683                                         /* Went too low - force async */
3684                                         reject = TRUE;
3685                                 }
3686                         } else {
3687                                 /*
3688                                  * Send our own SDTR in reply
3689                                  */
3690                                 if (bootverbose
3691                                  && devinfo->role == ROLE_INITIATOR) {
3692                                         printk("(%s:%c:%d:%d): Target "
3693                                                "Initiated SDTR\n",
3694                                                ahc_name(ahc), devinfo->channel,
3695                                                devinfo->target, devinfo->lun);
3696                                 }
3697                                 ahc->msgout_index = 0;
3698                                 ahc->msgout_len = 0;
3699                                 ahc_construct_sdtr(ahc, devinfo,
3700                                                    period, offset);
3701                                 ahc->msgout_index = 0;
3702                                 response = TRUE;
3703                         }
3704                         done = MSGLOOP_MSGCOMPLETE;
3705                         break;
3706                 }
3707                 case MSG_EXT_WDTR:
3708                 {
3709                         u_int bus_width;
3710                         u_int saved_width;
3711                         u_int sending_reply;
3712
3713                         sending_reply = FALSE;
3714                         if (ahc->msgin_buf[1] != MSG_EXT_WDTR_LEN) {
3715                                 reject = TRUE;
3716                                 break;
3717                         }
3718
3719                         /*
3720                          * Wait until we have our arg before validating
3721                          * and acting on this message.
3722                          *
3723                          * Add one to MSG_EXT_WDTR_LEN to account for
3724                          * the extended message preamble.
3725                          */
3726                         if (ahc->msgin_index < (MSG_EXT_WDTR_LEN + 1))
3727                                 break;
3728
3729                         bus_width = ahc->msgin_buf[3];
3730                         saved_width = bus_width;
3731                         ahc_validate_width(ahc, tinfo, &bus_width,
3732                                            devinfo->role);
3733                         if (bootverbose) {
3734                                 printk("(%s:%c:%d:%d): Received WDTR "
3735                                        "%x filtered to %x\n",
3736                                        ahc_name(ahc), devinfo->channel,
3737                                        devinfo->target, devinfo->lun,
3738                                        saved_width, bus_width);
3739                         }
3740
3741                         if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_WDTR, TRUE)) {
3742                                 /*
3743                                  * Don't send a WDTR back to the
3744                                  * target, since we asked first.
3745                                  * If the width went higher than our
3746                                  * request, reject it.
3747                                  */
3748                                 if (saved_width > bus_width) {
3749                                         reject = TRUE;
3750                                         printk("(%s:%c:%d:%d): requested %dBit "
3751                                                "transfers.  Rejecting...\n",
3752                                                ahc_name(ahc), devinfo->channel,
3753                                                devinfo->target, devinfo->lun,
3754                                                8 * (0x01 << bus_width));
3755                                         bus_width = 0;
3756                                 }
3757                         } else {
3758                                 /*
3759                                  * Send our own WDTR in reply
3760                                  */
3761                                 if (bootverbose
3762                                  && devinfo->role == ROLE_INITIATOR) {
3763                                         printk("(%s:%c:%d:%d): Target "
3764                                                "Initiated WDTR\n",
3765                                                ahc_name(ahc), devinfo->channel,
3766                                                devinfo->target, devinfo->lun);
3767                                 }
3768                                 ahc->msgout_index = 0;
3769                                 ahc->msgout_len = 0;
3770                                 ahc_construct_wdtr(ahc, devinfo, bus_width);
3771                                 ahc->msgout_index = 0;
3772                                 response = TRUE;
3773                                 sending_reply = TRUE;
3774                         }
3775                         /*
3776                          * After a wide message, we are async, but
3777                          * some devices don't seem to honor this portion
3778                          * of the spec.  Force a renegotiation of the
3779                          * sync component of our transfer agreement even
3780                          * if our goal is async.  By updating our width
3781                          * after forcing the negotiation, we avoid
3782                          * renegotiating for width.
3783                          */
3784                         ahc_update_neg_request(ahc, devinfo, tstate,
3785                                                tinfo, AHC_NEG_ALWAYS);
3786                         ahc_set_width(ahc, devinfo, bus_width,
3787                                       AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
3788                                       /*paused*/TRUE);
3789                         if (sending_reply == FALSE && reject == FALSE) {
3790
3791                                 /*
3792                                  * We will always have an SDTR to send.
3793                                  */
3794                                 ahc->msgout_index = 0;
3795                                 ahc->msgout_len = 0;
3796                                 ahc_build_transfer_msg(ahc, devinfo);
3797                                 ahc->msgout_index = 0;
3798                                 response = TRUE;
3799                         }
3800                         done = MSGLOOP_MSGCOMPLETE;
3801                         break;
3802                 }
3803                 case MSG_EXT_PPR:
3804                 {
3805                         const struct ahc_syncrate *syncrate;
3806                         u_int   period;
3807                         u_int   offset;
3808                         u_int   bus_width;
3809                         u_int   ppr_options;
3810                         u_int   saved_width;
3811                         u_int   saved_offset;
3812                         u_int   saved_ppr_options;
3813
3814                         if (ahc->msgin_buf[1] != MSG_EXT_PPR_LEN) {
3815                                 reject = TRUE;
3816                                 break;
3817                         }
3818
3819                         /*
3820                          * Wait until we have all args before validating
3821                          * and acting on this message.
3822                          *
3823                          * Add one to MSG_EXT_PPR_LEN to account for
3824                          * the extended message preamble.
3825                          */
3826                         if (ahc->msgin_index < (MSG_EXT_PPR_LEN + 1))
3827                                 break;
3828
3829                         period = ahc->msgin_buf[3];
3830                         offset = ahc->msgin_buf[5];
3831                         bus_width = ahc->msgin_buf[6];
3832                         saved_width = bus_width;
3833                         ppr_options = ahc->msgin_buf[7];
3834                         /*
3835                          * According to the spec, a DT only
3836                          * period factor with no DT option
3837                          * set implies async.
3838                          */
3839                         if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0
3840                          && period == 9)
3841                                 offset = 0;
3842                         saved_ppr_options = ppr_options;
3843                         saved_offset = offset;
3844
3845                         /*
3846                          * Mask out any options we don't support
3847                          * on any controller.  Transfer options are
3848                          * only available if we are negotiating wide.
3849                          */
3850                         ppr_options &= MSG_EXT_PPR_DT_REQ;
3851                         if (bus_width == 0)
3852                                 ppr_options = 0;
3853
3854                         ahc_validate_width(ahc, tinfo, &bus_width,
3855                                            devinfo->role);
3856                         syncrate = ahc_devlimited_syncrate(ahc, tinfo, &period,
3857                                                            &ppr_options,
3858                                                            devinfo->role);
3859                         ahc_validate_offset(ahc, tinfo, syncrate,
3860                                             &offset, bus_width,
3861                                             devinfo->role);
3862
3863                         if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_PPR, TRUE)) {
3864                                 /*
3865                                  * If we are unable to do any of the
3866                                  * requested options (we went too low),
3867                                  * then we'll have to reject the message.
3868                                  */
3869                                 if (saved_width > bus_width
3870                                  || saved_offset != offset
3871                                  || saved_ppr_options != ppr_options) {
3872                                         reject = TRUE;
3873                                         period = 0;
3874                                         offset = 0;
3875                                         bus_width = 0;
3876                                         ppr_options = 0;
3877                                         syncrate = NULL;
3878                                 }
3879                         } else {
3880                                 if (devinfo->role != ROLE_TARGET)
3881                                         printk("(%s:%c:%d:%d): Target "
3882                                                "Initiated PPR\n",
3883                                                ahc_name(ahc), devinfo->channel,
3884                                                devinfo->target, devinfo->lun);
3885                                 else
3886                                         printk("(%s:%c:%d:%d): Initiator "
3887                                                "Initiated PPR\n",
3888                                                ahc_name(ahc), devinfo->channel,
3889                                                devinfo->target, devinfo->lun);
3890                                 ahc->msgout_index = 0;
3891                                 ahc->msgout_len = 0;
3892                                 ahc_construct_ppr(ahc, devinfo, period, offset,
3893                                                   bus_width, ppr_options);
3894                                 ahc->msgout_index = 0;
3895                                 response = TRUE;
3896                         }
3897                         if (bootverbose) {
3898                                 printk("(%s:%c:%d:%d): Received PPR width %x, "
3899                                        "period %x, offset %x,options %x\n"
3900                                        "\tFiltered to width %x, period %x, "
3901                                        "offset %x, options %x\n",
3902                                        ahc_name(ahc), devinfo->channel,
3903                                        devinfo->target, devinfo->lun,
3904                                        saved_width, ahc->msgin_buf[3],
3905                                        saved_offset, saved_ppr_options,
3906                                        bus_width, period, offset, ppr_options);
3907                         }
3908                         ahc_set_width(ahc, devinfo, bus_width,
3909                                       AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
3910                                       /*paused*/TRUE);
3911                         ahc_set_syncrate(ahc, devinfo,
3912                                          syncrate, period,
3913                                          offset, ppr_options,
3914                                          AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
3915                                          /*paused*/TRUE);
3916                         done = MSGLOOP_MSGCOMPLETE;
3917                         break;
3918                 }
3919                 default:
3920                         /* Unknown extended message.  Reject it. */
3921                         reject = TRUE;
3922                         break;
3923                 }
3924                 break;
3925         }
3926 #ifdef AHC_TARGET_MODE
3927         case MSG_BUS_DEV_RESET:
3928                 ahc_handle_devreset(ahc, devinfo,
3929                                     CAM_BDR_SENT,
3930                                     "Bus Device Reset Received",
3931                                     /*verbose_level*/0);
3932                 ahc_restart(ahc);
3933                 done = MSGLOOP_TERMINATED;
3934                 break;
3935         case MSG_ABORT_TAG:
3936         case MSG_ABORT:
3937         case MSG_CLEAR_QUEUE:
3938         {
3939                 int tag;
3940
3941                 /* Target mode messages */
3942                 if (devinfo->role != ROLE_TARGET) {
3943                         reject = TRUE;
3944                         break;
3945                 }
3946                 tag = SCB_LIST_NULL;
3947                 if (ahc->msgin_buf[0] == MSG_ABORT_TAG)
3948                         tag = ahc_inb(ahc, INITIATOR_TAG);
3949                 ahc_abort_scbs(ahc, devinfo->target, devinfo->channel,
3950                                devinfo->lun, tag, ROLE_TARGET,
3951                                CAM_REQ_ABORTED);
3952
3953                 tstate = ahc->enabled_targets[devinfo->our_scsiid];
3954                 if (tstate != NULL) {
3955                         struct ahc_tmode_lstate* lstate;
3956
3957                         lstate = tstate->enabled_luns[devinfo->lun];
3958                         if (lstate != NULL) {
3959                                 ahc_queue_lstate_event(ahc, lstate,
3960                                                        devinfo->our_scsiid,
3961                                                        ahc->msgin_buf[0],
3962                                                        /*arg*/tag);
3963                                 ahc_send_lstate_events(ahc, lstate);
3964                         }
3965                 }
3966                 ahc_restart(ahc);
3967                 done = MSGLOOP_TERMINATED;
3968                 break;
3969         }
3970 #endif
3971         case MSG_TERM_IO_PROC:
3972         default:
3973                 reject = TRUE;
3974                 break;
3975         }
3976
3977         if (reject) {
3978                 /*
3979                  * Setup to reject the message.
3980                  */
3981                 ahc->msgout_index = 0;
3982                 ahc->msgout_len = 1;
3983                 ahc->msgout_buf[0] = MSG_MESSAGE_REJECT;
3984                 done = MSGLOOP_MSGCOMPLETE;
3985                 response = TRUE;
3986         }
3987
3988         if (done != MSGLOOP_IN_PROG && !response)
3989                 /* Clear the outgoing message buffer */
3990                 ahc->msgout_len = 0;
3991
3992         return (done);
3993 }
3994
3995 /*
3996  * Process a message reject message.
3997  */
3998 static int
3999 ahc_handle_msg_reject(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
4000 {
4001         /*
4002          * What we care about here is if we had an
4003          * outstanding SDTR or WDTR message for this
4004          * target.  If we did, this is a signal that
4005          * the target is refusing negotiation.
4006          */
4007         struct scb *scb;
4008         struct ahc_initiator_tinfo *tinfo;
4009         struct ahc_tmode_tstate *tstate;
4010         u_int scb_index;
4011         u_int last_msg;
4012         int   response = 0;
4013
4014         scb_index = ahc_inb(ahc, SCB_TAG);
4015         scb = ahc_lookup_scb(ahc, scb_index);
4016         tinfo = ahc_fetch_transinfo(ahc, devinfo->channel,
4017                                     devinfo->our_scsiid,
4018                                     devinfo->target, &tstate);
4019         /* Might be necessary */
4020         last_msg = ahc_inb(ahc, LAST_MSG);
4021
4022         if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) {
4023                 /*
4024                  * Target does not support the PPR message.
4025                  * Attempt to negotiate SPI-2 style.
4026                  */
4027                 if (bootverbose) {
4028                         printk("(%s:%c:%d:%d): PPR Rejected. "
4029                                "Trying WDTR/SDTR\n",
4030                                ahc_name(ahc), devinfo->channel,
4031                                devinfo->target, devinfo->lun);
4032                 }
4033                 tinfo->goal.ppr_options = 0;
4034                 tinfo->curr.transport_version = 2;
4035                 tinfo->goal.transport_version = 2;
4036                 ahc->msgout_index = 0;
4037                 ahc->msgout_len = 0;
4038                 ahc_build_transfer_msg(ahc, devinfo);
4039                 ahc->msgout_index = 0;
4040                 response = 1;
4041         } else if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) {
4042
4043                 /* note 8bit xfers */
4044                 printk("(%s:%c:%d:%d): refuses WIDE negotiation.  Using "
4045                        "8bit transfers\n", ahc_name(ahc),
4046                        devinfo->channel, devinfo->target, devinfo->lun);
4047                 ahc_set_width(ahc, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
4048                               AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
4049                               /*paused*/TRUE);
4050                 /*
4051                  * No need to clear the sync rate.  If the target
4052                  * did not accept the command, our syncrate is
4053                  * unaffected.  If the target started the negotiation,
4054                  * but rejected our response, we already cleared the
4055                  * sync rate before sending our WDTR.
4056                  */
4057                 if (tinfo->goal.offset != tinfo->curr.offset) {
4058
4059                         /* Start the sync negotiation */
4060                         ahc->msgout_index = 0;
4061                         ahc->msgout_len = 0;
4062                         ahc_build_transfer_msg(ahc, devinfo);
4063                         ahc->msgout_index = 0;
4064                         response = 1;
4065                 }
4066         } else if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) {
4067                 /* note asynch xfers and clear flag */
4068                 ahc_set_syncrate(ahc, devinfo, /*syncrate*/NULL, /*period*/0,
4069                                  /*offset*/0, /*ppr_options*/0,
4070                                  AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
4071                                  /*paused*/TRUE);
4072                 printk("(%s:%c:%d:%d): refuses synchronous negotiation. "
4073                        "Using asynchronous transfers\n",
4074                        ahc_name(ahc), devinfo->channel,
4075                        devinfo->target, devinfo->lun);
4076         } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) {
4077                 int tag_type;
4078                 int mask;
4079
4080                 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK);
4081
4082                 if (tag_type == MSG_SIMPLE_TASK) {
4083                         printk("(%s:%c:%d:%d): refuses tagged commands.  "
4084                                "Performing non-tagged I/O\n", ahc_name(ahc),
4085                                devinfo->channel, devinfo->target, devinfo->lun);
4086                         ahc_set_tags(ahc, scb->io_ctx, devinfo, AHC_QUEUE_NONE);
4087                         mask = ~0x23;
4088                 } else {
4089                         printk("(%s:%c:%d:%d): refuses %s tagged commands.  "
4090                                "Performing simple queue tagged I/O only\n",
4091                                ahc_name(ahc), devinfo->channel, devinfo->target,
4092                                devinfo->lun, tag_type == MSG_ORDERED_TASK
4093                                ? "ordered" : "head of queue");
4094                         ahc_set_tags(ahc, scb->io_ctx, devinfo, AHC_QUEUE_BASIC);
4095                         mask = ~0x03;
4096                 }
4097
4098                 /*
4099                  * Resend the identify for this CCB as the target
4100                  * may believe that the selection is invalid otherwise.
4101                  */
4102                 ahc_outb(ahc, SCB_CONTROL,
4103                          ahc_inb(ahc, SCB_CONTROL) & mask);
4104                 scb->hscb->control &= mask;
4105                 ahc_set_transaction_tag(scb, /*enabled*/FALSE,
4106                                         /*type*/MSG_SIMPLE_TASK);
4107                 ahc_outb(ahc, MSG_OUT, MSG_IDENTIFYFLAG);
4108                 ahc_assert_atn(ahc);
4109
4110                 /*
4111                  * This transaction is now at the head of
4112                  * the untagged queue for this target.
4113                  */
4114                 if ((ahc->flags & AHC_SCB_BTT) == 0) {
4115                         struct scb_tailq *untagged_q;
4116
4117                         untagged_q =
4118                             &(ahc->untagged_queues[devinfo->target_offset]);
4119                         TAILQ_INSERT_HEAD(untagged_q, scb, links.tqe);
4120                         scb->flags |= SCB_UNTAGGEDQ;
4121                 }
4122                 ahc_busy_tcl(ahc, BUILD_TCL(scb->hscb->scsiid, devinfo->lun),
4123                              scb->hscb->tag);
4124
4125                 /*
4126                  * Requeue all tagged commands for this target
4127                  * currently in our possession so they can be
4128                  * converted to untagged commands.
4129                  */
4130                 ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
4131                                    SCB_GET_CHANNEL(ahc, scb),
4132                                    SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL,
4133                                    ROLE_INITIATOR, CAM_REQUEUE_REQ,
4134                                    SEARCH_COMPLETE);
4135         } else {
4136                 /*
4137                  * Otherwise, we ignore it.
4138                  */
4139                 printk("%s:%c:%d: Message reject for %x -- ignored\n",
4140                        ahc_name(ahc), devinfo->channel, devinfo->target,
4141                        last_msg);
4142         }
4143         return (response);
4144 }
4145
4146 /*
4147  * Process an ingnore wide residue message.
4148  */
4149 static void
4150 ahc_handle_ign_wide_residue(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
4151 {
4152         u_int scb_index;
4153         struct scb *scb;
4154
4155         scb_index = ahc_inb(ahc, SCB_TAG);
4156         scb = ahc_lookup_scb(ahc, scb_index);
4157         /*
4158          * XXX Actually check data direction in the sequencer?
4159          * Perhaps add datadir to some spare bits in the hscb?
4160          */
4161         if ((ahc_inb(ahc, SEQ_FLAGS) & DPHASE) == 0
4162          || ahc_get_transfer_dir(scb) != CAM_DIR_IN) {
4163                 /*
4164                  * Ignore the message if we haven't
4165                  * seen an appropriate data phase yet.
4166                  */
4167         } else {
4168                 /*
4169                  * If the residual occurred on the last
4170                  * transfer and the transfer request was
4171                  * expected to end on an odd count, do
4172                  * nothing.  Otherwise, subtract a byte
4173                  * and update the residual count accordingly.
4174                  */
4175                 uint32_t sgptr;
4176
4177                 sgptr = ahc_inb(ahc, SCB_RESIDUAL_SGPTR);
4178                 if ((sgptr & SG_LIST_NULL) != 0
4179                  && (ahc_inb(ahc, SCB_LUN) & SCB_XFERLEN_ODD) != 0) {
4180                         /*
4181                          * If the residual occurred on the last
4182                          * transfer and the transfer request was
4183                          * expected to end on an odd count, do
4184                          * nothing.
4185                          */
4186                 } else {
4187                         struct ahc_dma_seg *sg;
4188                         uint32_t data_cnt;
4189                         uint32_t data_addr;
4190                         uint32_t sglen;
4191
4192                         /* Pull in all of the sgptr */
4193                         sgptr = ahc_inl(ahc, SCB_RESIDUAL_SGPTR);
4194                         data_cnt = ahc_inl(ahc, SCB_RESIDUAL_DATACNT);
4195
4196                         if ((sgptr & SG_LIST_NULL) != 0) {
4197                                 /*
4198                                  * The residual data count is not updated
4199                                  * for the command run to completion case.
4200                                  * Explicitly zero the count.
4201                                  */
4202                                 data_cnt &= ~AHC_SG_LEN_MASK;
4203                         }
4204
4205                         data_addr = ahc_inl(ahc, SHADDR);
4206
4207                         data_cnt += 1;
4208                         data_addr -= 1;
4209                         sgptr &= SG_PTR_MASK;
4210
4211                         sg = ahc_sg_bus_to_virt(scb, sgptr);
4212
4213                         /*
4214                          * The residual sg ptr points to the next S/G
4215                          * to load so we must go back one.
4216                          */
4217                         sg--;
4218                         sglen = ahc_le32toh(sg->len) & AHC_SG_LEN_MASK;
4219                         if (sg != scb->sg_list
4220                          && sglen < (data_cnt & AHC_SG_LEN_MASK)) {
4221
4222                                 sg--;
4223                                 sglen = ahc_le32toh(sg->len);
4224                                 /*
4225                                  * Preserve High Address and SG_LIST bits
4226                                  * while setting the count to 1.
4227                                  */
4228                                 data_cnt = 1 | (sglen & (~AHC_SG_LEN_MASK));
4229                                 data_addr = ahc_le32toh(sg->addr)
4230                                           + (sglen & AHC_SG_LEN_MASK) - 1;
4231
4232                                 /*
4233                                  * Increment sg so it points to the
4234                                  * "next" sg.
4235                                  */
4236                                 sg++;
4237                                 sgptr = ahc_sg_virt_to_bus(scb, sg);
4238                         }
4239                         ahc_outl(ahc, SCB_RESIDUAL_SGPTR, sgptr);
4240                         ahc_outl(ahc, SCB_RESIDUAL_DATACNT, data_cnt);
4241                         /*
4242                          * Toggle the "oddness" of the transfer length
4243                          * to handle this mid-transfer ignore wide
4244                          * residue.  This ensures that the oddness is
4245                          * correct for subsequent data transfers.
4246                          */
4247                         ahc_outb(ahc, SCB_LUN,
4248                                  ahc_inb(ahc, SCB_LUN) ^ SCB_XFERLEN_ODD);
4249                 }
4250         }
4251 }
4252
4253
4254 /*
4255  * Reinitialize the data pointers for the active transfer
4256  * based on its current residual.
4257  */
4258 static void
4259 ahc_reinitialize_dataptrs(struct ahc_softc *ahc)
4260 {
4261         struct   scb *scb;
4262         struct   ahc_dma_seg *sg;
4263         u_int    scb_index;
4264         uint32_t sgptr;
4265         uint32_t resid;
4266         uint32_t dataptr;
4267
4268         scb_index = ahc_inb(ahc, SCB_TAG);
4269         scb = ahc_lookup_scb(ahc, scb_index);
4270         sgptr = (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 3) << 24)
4271               | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 2) << 16)
4272               | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 1) << 8)
4273               | ahc_inb(ahc, SCB_RESIDUAL_SGPTR);
4274
4275         sgptr &= SG_PTR_MASK;
4276         sg = ahc_sg_bus_to_virt(scb, sgptr);
4277
4278         /* The residual sg_ptr always points to the next sg */
4279         sg--;
4280
4281         resid = (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 2) << 16)
4282               | (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 1) << 8)
4283               | ahc_inb(ahc, SCB_RESIDUAL_DATACNT);
4284
4285         dataptr = ahc_le32toh(sg->addr)
4286                 + (ahc_le32toh(sg->len) & AHC_SG_LEN_MASK)
4287                 - resid;
4288         if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) {
4289                 u_int dscommand1;
4290
4291                 dscommand1 = ahc_inb(ahc, DSCOMMAND1);
4292                 ahc_outb(ahc, DSCOMMAND1, dscommand1 | HADDLDSEL0);
4293                 ahc_outb(ahc, HADDR,
4294                          (ahc_le32toh(sg->len) >> 24) & SG_HIGH_ADDR_BITS);
4295                 ahc_outb(ahc, DSCOMMAND1, dscommand1);
4296         }
4297         ahc_outb(ahc, HADDR + 3, dataptr >> 24);
4298         ahc_outb(ahc, HADDR + 2, dataptr >> 16);
4299         ahc_outb(ahc, HADDR + 1, dataptr >> 8);
4300         ahc_outb(ahc, HADDR, dataptr);
4301         ahc_outb(ahc, HCNT + 2, resid >> 16);
4302         ahc_outb(ahc, HCNT + 1, resid >> 8);
4303         ahc_outb(ahc, HCNT, resid);
4304         if ((ahc->features & AHC_ULTRA2) == 0) {
4305                 ahc_outb(ahc, STCNT + 2, resid >> 16);
4306                 ahc_outb(ahc, STCNT + 1, resid >> 8);
4307                 ahc_outb(ahc, STCNT, resid);
4308         }
4309 }
4310
4311 /*
4312  * Handle the effects of issuing a bus device reset message.
4313  */
4314 static void
4315 ahc_handle_devreset(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
4316                     cam_status status, char *message, int verbose_level)
4317 {
4318 #ifdef AHC_TARGET_MODE
4319         struct ahc_tmode_tstate* tstate;
4320         u_int lun;
4321 #endif
4322         int found;
4323
4324         found = ahc_abort_scbs(ahc, devinfo->target, devinfo->channel,
4325                                CAM_LUN_WILDCARD, SCB_LIST_NULL, devinfo->role,
4326                                status);
4327
4328 #ifdef AHC_TARGET_MODE
4329         /*
4330          * Send an immediate notify ccb to all target mord peripheral
4331          * drivers affected by this action.
4332          */
4333         tstate = ahc->enabled_targets[devinfo->our_scsiid];
4334         if (tstate != NULL) {
4335                 for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
4336                         struct ahc_tmode_lstate* lstate;
4337
4338                         lstate = tstate->enabled_luns[lun];
4339                         if (lstate == NULL)
4340                                 continue;
4341
4342                         ahc_queue_lstate_event(ahc, lstate, devinfo->our_scsiid,
4343                                                MSG_BUS_DEV_RESET, /*arg*/0);
4344                         ahc_send_lstate_events(ahc, lstate);
4345                 }
4346         }
4347 #endif
4348
4349         /*
4350          * Go back to async/narrow transfers and renegotiate.
4351          */
4352         ahc_set_width(ahc, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
4353                       AHC_TRANS_CUR, /*paused*/TRUE);
4354         ahc_set_syncrate(ahc, devinfo, /*syncrate*/NULL,
4355                          /*period*/0, /*offset*/0, /*ppr_options*/0,
4356                          AHC_TRANS_CUR, /*paused*/TRUE);
4357
4358         if (status != CAM_SEL_TIMEOUT)
4359                 ahc_send_async(ahc, devinfo->channel, devinfo->target,
4360                                CAM_LUN_WILDCARD, AC_SENT_BDR);
4361
4362         if (message != NULL
4363          && (verbose_level <= bootverbose))
4364                 printk("%s: %s on %c:%d. %d SCBs aborted\n", ahc_name(ahc),
4365                        message, devinfo->channel, devinfo->target, found);
4366 }
4367
4368 #ifdef AHC_TARGET_MODE
4369 static void
4370 ahc_setup_target_msgin(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
4371                        struct scb *scb)
4372 {
4373
4374         /*
4375          * To facilitate adding multiple messages together,
4376          * each routine should increment the index and len
4377          * variables instead of setting them explicitly.
4378          */
4379         ahc->msgout_index = 0;
4380         ahc->msgout_len = 0;
4381
4382         if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0)
4383                 ahc_build_transfer_msg(ahc, devinfo);
4384         else
4385                 panic("ahc_intr: AWAITING target message with no message");
4386
4387         ahc->msgout_index = 0;
4388         ahc->msg_type = MSG_TYPE_TARGET_MSGIN;
4389 }
4390 #endif
4391 /**************************** Initialization **********************************/
4392 /*
4393  * Allocate a controller structure for a new device
4394  * and perform initial initializion.
4395  */
4396 struct ahc_softc *
4397 ahc_alloc(void *platform_arg, char *name)
4398 {
4399         struct  ahc_softc *ahc;
4400         int     i;
4401
4402 #ifndef __FreeBSD__
4403         ahc = kmalloc(sizeof(*ahc), GFP_ATOMIC);
4404         if (!ahc) {
4405                 printk("aic7xxx: cannot malloc softc!\n");
4406                 kfree(name);
4407                 return NULL;
4408         }
4409 #else
4410         ahc = device_get_softc((device_t)platform_arg);
4411 #endif
4412         memset(ahc, 0, sizeof(*ahc));
4413         ahc->seep_config = kmalloc(sizeof(*ahc->seep_config), GFP_ATOMIC);
4414         if (ahc->seep_config == NULL) {
4415 #ifndef __FreeBSD__
4416                 kfree(ahc);
4417 #endif
4418                 kfree(name);
4419                 return (NULL);
4420         }
4421         LIST_INIT(&ahc->pending_scbs);
4422         /* We don't know our unit number until the OSM sets it */
4423         ahc->name = name;
4424         ahc->unit = -1;
4425         ahc->description = NULL;
4426         ahc->channel = 'A';
4427         ahc->channel_b = 'B';
4428         ahc->chip = AHC_NONE;
4429         ahc->features = AHC_FENONE;
4430         ahc->bugs = AHC_BUGNONE;
4431         ahc->flags = AHC_FNONE;
4432         /*
4433          * Default to all error reporting enabled with the
4434          * sequencer operating at its fastest speed.
4435          * The bus attach code may modify this.
4436          */
4437         ahc->seqctl = FASTMODE;
4438
4439         for (i = 0; i < AHC_NUM_TARGETS; i++)
4440                 TAILQ_INIT(&ahc->untagged_queues[i]);
4441         if (ahc_platform_alloc(ahc, platform_arg) != 0) {
4442                 ahc_free(ahc);
4443                 ahc = NULL;
4444         }
4445         return (ahc);
4446 }
4447
4448 int
4449 ahc_softc_init(struct ahc_softc *ahc)
4450 {
4451
4452         /* The IRQMS bit is only valid on VL and EISA chips */
4453         if ((ahc->chip & AHC_PCI) == 0)
4454                 ahc->unpause = ahc_inb(ahc, HCNTRL) & IRQMS;
4455         else
4456                 ahc->unpause = 0;
4457         ahc->pause = ahc->unpause | PAUSE;
4458         /* XXX The shared scb data stuff should be deprecated */
4459         if (ahc->scb_data == NULL) {
4460                 ahc->scb_data = kzalloc(sizeof(*ahc->scb_data), GFP_ATOMIC);
4461                 if (ahc->scb_data == NULL)
4462                         return (ENOMEM);
4463         }
4464
4465         return (0);
4466 }
4467
4468 void
4469 ahc_set_unit(struct ahc_softc *ahc, int unit)
4470 {
4471         ahc->unit = unit;
4472 }
4473
4474 void
4475 ahc_set_name(struct ahc_softc *ahc, char *name)
4476 {
4477         if (ahc->name != NULL)
4478                 kfree(ahc->name);
4479         ahc->name = name;
4480 }
4481
4482 void
4483 ahc_free(struct ahc_softc *ahc)
4484 {
4485         int i;
4486
4487         switch (ahc->init_level) {
4488         default:
4489         case 5:
4490                 ahc_shutdown(ahc);
4491                 /* FALLTHROUGH */
4492         case 4:
4493                 ahc_dmamap_unload(ahc, ahc->shared_data_dmat,
4494                                   ahc->shared_data_dmamap);
4495                 /* FALLTHROUGH */
4496         case 3:
4497                 ahc_dmamem_free(ahc, ahc->shared_data_dmat, ahc->qoutfifo,
4498                                 ahc->shared_data_dmamap);
4499                 ahc_dmamap_destroy(ahc, ahc->shared_data_dmat,
4500                                    ahc->shared_data_dmamap);
4501                 /* FALLTHROUGH */
4502         case 2:
4503                 ahc_dma_tag_destroy(ahc, ahc->shared_data_dmat);
4504         case 1:
4505                 break;
4506         case 0:
4507                 break;
4508         }
4509
4510         ahc_platform_free(ahc);
4511         ahc_fini_scbdata(ahc);
4512         for (i = 0; i < AHC_NUM_TARGETS; i++) {
4513                 struct ahc_tmode_tstate *tstate;
4514
4515                 tstate = ahc->enabled_targets[i];
4516                 if (tstate != NULL) {
4517 #ifdef AHC_TARGET_MODE
4518                         int j;
4519
4520                         for (j = 0; j < AHC_NUM_LUNS; j++) {
4521                                 struct ahc_tmode_lstate *lstate;
4522
4523                                 lstate = tstate->enabled_luns[j];
4524                                 if (lstate != NULL) {
4525                                         xpt_free_path(lstate->path);
4526                                         kfree(lstate);
4527                                 }
4528                         }
4529 #endif
4530                         kfree(tstate);
4531                 }
4532         }
4533 #ifdef AHC_TARGET_MODE
4534         if (ahc->black_hole != NULL) {
4535                 xpt_free_path(ahc->black_hole->path);
4536                 kfree(ahc->black_hole);
4537         }
4538 #endif
4539         if (ahc->name != NULL)
4540                 kfree(ahc->name);
4541         if (ahc->seep_config != NULL)
4542                 kfree(ahc->seep_config);
4543 #ifndef __FreeBSD__
4544         kfree(ahc);
4545 #endif
4546         return;
4547 }
4548
4549 static void
4550 ahc_shutdown(void *arg)
4551 {
4552         struct  ahc_softc *ahc;
4553         int     i;
4554
4555         ahc = (struct ahc_softc *)arg;
4556
4557         /* This will reset most registers to 0, but not all */
4558         ahc_reset(ahc, /*reinit*/FALSE);
4559         ahc_outb(ahc, SCSISEQ, 0);
4560         ahc_outb(ahc, SXFRCTL0, 0);
4561         ahc_outb(ahc, DSPCISTATUS, 0);
4562
4563         for (i = TARG_SCSIRATE; i < SCSICONF; i++)
4564                 ahc_outb(ahc, i, 0);
4565 }
4566
4567 /*
4568  * Reset the controller and record some information about it
4569  * that is only available just after a reset.  If "reinit" is
4570  * non-zero, this reset occurred after initial configuration
4571  * and the caller requests that the chip be fully reinitialized
4572  * to a runable state.  Chip interrupts are *not* enabled after
4573  * a reinitialization.  The caller must enable interrupts via
4574  * ahc_intr_enable().
4575  */
4576 int
4577 ahc_reset(struct ahc_softc *ahc, int reinit)
4578 {
4579         u_int   sblkctl;
4580         u_int   sxfrctl1_a, sxfrctl1_b;
4581         int     error;
4582         int     wait;
4583
4584         /*
4585          * Preserve the value of the SXFRCTL1 register for all channels.
4586          * It contains settings that affect termination and we don't want
4587          * to disturb the integrity of the bus.
4588          */
4589         ahc_pause(ahc);
4590         sxfrctl1_b = 0;
4591         if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7770) {
4592                 u_int sblkctl;
4593
4594                 /*
4595                  * Save channel B's settings in case this chip
4596                  * is setup for TWIN channel operation.
4597                  */
4598                 sblkctl = ahc_inb(ahc, SBLKCTL);
4599                 ahc_outb(ahc, SBLKCTL, sblkctl | SELBUSB);
4600                 sxfrctl1_b = ahc_inb(ahc, SXFRCTL1);
4601                 ahc_outb(ahc, SBLKCTL, sblkctl & ~SELBUSB);
4602         }
4603         sxfrctl1_a = ahc_inb(ahc, SXFRCTL1);
4604
4605         ahc_outb(ahc, HCNTRL, CHIPRST | ahc->pause);
4606
4607         /*
4608          * Ensure that the reset has finished.  We delay 1000us
4609          * prior to reading the register to make sure the chip
4610          * has sufficiently completed its reset to handle register
4611          * accesses.
4612          */
4613         wait = 1000;
4614         do {
4615                 ahc_delay(1000);
4616         } while (--wait && !(ahc_inb(ahc, HCNTRL) & CHIPRSTACK));
4617
4618         if (wait == 0) {
4619                 printk("%s: WARNING - Failed chip reset!  "
4620                        "Trying to initialize anyway.\n", ahc_name(ahc));
4621         }
4622         ahc_outb(ahc, HCNTRL, ahc->pause);
4623
4624         /* Determine channel configuration */
4625         sblkctl = ahc_inb(ahc, SBLKCTL) & (SELBUSB|SELWIDE);
4626         /* No Twin Channel PCI cards */
4627         if ((ahc->chip & AHC_PCI) != 0)
4628                 sblkctl &= ~SELBUSB;
4629         switch (sblkctl) {
4630         case 0:
4631                 /* Single Narrow Channel */
4632                 break;
4633         case 2:
4634                 /* Wide Channel */
4635                 ahc->features |= AHC_WIDE;
4636                 break;
4637         case 8:
4638                 /* Twin Channel */
4639                 ahc->features |= AHC_TWIN;
4640                 break;
4641         default:
4642                 printk(" Unsupported adapter type.  Ignoring\n");
4643                 return(-1);
4644         }
4645
4646         /*
4647          * Reload sxfrctl1.
4648          *
4649          * We must always initialize STPWEN to 1 before we
4650          * restore the saved values.  STPWEN is initialized
4651          * to a tri-state condition which can only be cleared
4652          * by turning it on.
4653          */
4654         if ((ahc->features & AHC_TWIN) != 0) {
4655                 u_int sblkctl;
4656
4657                 sblkctl = ahc_inb(ahc, SBLKCTL);
4658                 ahc_outb(ahc, SBLKCTL, sblkctl | SELBUSB);
4659                 ahc_outb(ahc, SXFRCTL1, sxfrctl1_b);
4660                 ahc_outb(ahc, SBLKCTL, sblkctl & ~SELBUSB);
4661         }
4662         ahc_outb(ahc, SXFRCTL1, sxfrctl1_a);
4663
4664         error = 0;
4665         if (reinit != 0)
4666                 /*
4667                  * If a recovery action has forced a chip reset,
4668                  * re-initialize the chip to our liking.
4669                  */
4670                 error = ahc->bus_chip_init(ahc);
4671 #ifdef AHC_DUMP_SEQ
4672         else
4673                 ahc_dumpseq(ahc);
4674 #endif
4675
4676         return (error);
4677 }
4678
4679 /*
4680  * Determine the number of SCBs available on the controller
4681  */
4682 int
4683 ahc_probe_scbs(struct ahc_softc *ahc) {
4684         int i;
4685
4686         for (i = 0; i < AHC_SCB_MAX; i++) {
4687
4688                 ahc_outb(ahc, SCBPTR, i);
4689                 ahc_outb(ahc, SCB_BASE, i);
4690                 if (ahc_inb(ahc, SCB_BASE) != i)
4691                         break;
4692                 ahc_outb(ahc, SCBPTR, 0);
4693                 if (ahc_inb(ahc, SCB_BASE) != 0)
4694                         break;
4695         }
4696         return (i);
4697 }
4698
4699 static void
4700 ahc_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
4701 {
4702         dma_addr_t *baddr;
4703
4704         baddr = (dma_addr_t *)arg;
4705         *baddr = segs->ds_addr;
4706 }
4707
4708 static void
4709 ahc_build_free_scb_list(struct ahc_softc *ahc)
4710 {
4711         int scbsize;
4712         int i;
4713
4714         scbsize = 32;
4715         if ((ahc->flags & AHC_LSCBS_ENABLED) != 0)
4716                 scbsize = 64;
4717
4718         for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
4719                 int j;
4720
4721                 ahc_outb(ahc, SCBPTR, i);
4722
4723                 /*
4724                  * Touch all SCB bytes to avoid parity errors
4725                  * should one of our debugging routines read
4726                  * an otherwise uninitiatlized byte.
4727                  */
4728                 for (j = 0; j < scbsize; j++)
4729                         ahc_outb(ahc, SCB_BASE+j, 0xFF);
4730
4731                 /* Clear the control byte. */
4732                 ahc_outb(ahc, SCB_CONTROL, 0);
4733
4734                 /* Set the next pointer */
4735                 if ((ahc->flags & AHC_PAGESCBS) != 0)
4736                         ahc_outb(ahc, SCB_NEXT, i+1);
4737                 else
4738                         ahc_outb(ahc, SCB_NEXT, SCB_LIST_NULL);
4739
4740                 /* Make the tag number, SCSIID, and lun invalid */
4741                 ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL);
4742                 ahc_outb(ahc, SCB_SCSIID, 0xFF);
4743                 ahc_outb(ahc, SCB_LUN, 0xFF);
4744         }
4745
4746         if ((ahc->flags & AHC_PAGESCBS) != 0) {
4747                 /* SCB 0 heads the free list. */
4748                 ahc_outb(ahc, FREE_SCBH, 0);
4749         } else {
4750                 /* No free list. */
4751                 ahc_outb(ahc, FREE_SCBH, SCB_LIST_NULL);
4752         }
4753
4754         /* Make sure that the last SCB terminates the free list */
4755         ahc_outb(ahc, SCBPTR, i-1);
4756         ahc_outb(ahc, SCB_NEXT, SCB_LIST_NULL);
4757 }
4758
4759 static int
4760 ahc_init_scbdata(struct ahc_softc *ahc)
4761 {
4762         struct scb_data *scb_data;
4763
4764         scb_data = ahc->scb_data;
4765         SLIST_INIT(&scb_data->free_scbs);
4766         SLIST_INIT(&scb_data->sg_maps);
4767
4768         /* Allocate SCB resources */
4769         scb_data->scbarray = kcalloc(AHC_SCB_MAX_ALLOC, sizeof(struct scb),
4770                                      GFP_ATOMIC);
4771         if (scb_data->scbarray == NULL)
4772                 return (ENOMEM);
4773
4774         /* Determine the number of hardware SCBs and initialize them */
4775
4776         scb_data->maxhscbs = ahc_probe_scbs(ahc);
4777         if (ahc->scb_data->maxhscbs == 0) {
4778                 printk("%s: No SCB space found\n", ahc_name(ahc));
4779                 return (ENXIO);
4780         }
4781
4782         /*
4783          * Create our DMA tags.  These tags define the kinds of device
4784          * accessible memory allocations and memory mappings we will
4785          * need to perform during normal operation.
4786          *
4787          * Unless we need to further restrict the allocation, we rely
4788          * on the restrictions of the parent dmat, hence the common
4789          * use of MAXADDR and MAXSIZE.
4790          */
4791
4792         /* DMA tag for our hardware scb structures */
4793         if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/1,
4794                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
4795                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
4796                                /*highaddr*/BUS_SPACE_MAXADDR,
4797                                /*filter*/NULL, /*filterarg*/NULL,
4798                                AHC_SCB_MAX_ALLOC * sizeof(struct hardware_scb),
4799                                /*nsegments*/1,
4800                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
4801                                /*flags*/0, &scb_data->hscb_dmat) != 0) {
4802                 goto error_exit;
4803         }
4804
4805         scb_data->init_level++;
4806
4807         /* Allocation for our hscbs */
4808         if (ahc_dmamem_alloc(ahc, scb_data->hscb_dmat,
4809                              (void **)&scb_data->hscbs,
4810                              BUS_DMA_NOWAIT, &scb_data->hscb_dmamap) != 0) {
4811                 goto error_exit;
4812         }
4813
4814         scb_data->init_level++;
4815
4816         /* And permanently map them */
4817         ahc_dmamap_load(ahc, scb_data->hscb_dmat, scb_data->hscb_dmamap,
4818                         scb_data->hscbs,
4819                         AHC_SCB_MAX_ALLOC * sizeof(struct hardware_scb),
4820                         ahc_dmamap_cb, &scb_data->hscb_busaddr, /*flags*/0);
4821
4822         scb_data->init_level++;
4823
4824         /* DMA tag for our sense buffers */
4825         if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/1,
4826                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
4827                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
4828                                /*highaddr*/BUS_SPACE_MAXADDR,
4829                                /*filter*/NULL, /*filterarg*/NULL,
4830                                AHC_SCB_MAX_ALLOC * sizeof(struct scsi_sense_data),
4831                                /*nsegments*/1,
4832                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
4833                                /*flags*/0, &scb_data->sense_dmat) != 0) {
4834                 goto error_exit;
4835         }
4836
4837         scb_data->init_level++;
4838
4839         /* Allocate them */
4840         if (ahc_dmamem_alloc(ahc, scb_data->sense_dmat,
4841                              (void **)&scb_data->sense,
4842                              BUS_DMA_NOWAIT, &scb_data->sense_dmamap) != 0) {
4843                 goto error_exit;
4844         }
4845
4846         scb_data->init_level++;
4847
4848         /* And permanently map them */
4849         ahc_dmamap_load(ahc, scb_data->sense_dmat, scb_data->sense_dmamap,
4850                         scb_data->sense,
4851                         AHC_SCB_MAX_ALLOC * sizeof(struct scsi_sense_data),
4852                         ahc_dmamap_cb, &scb_data->sense_busaddr, /*flags*/0);
4853
4854         scb_data->init_level++;
4855
4856         /* DMA tag for our S/G structures.  We allocate in page sized chunks */
4857         if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/8,
4858                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
4859                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
4860                                /*highaddr*/BUS_SPACE_MAXADDR,
4861                                /*filter*/NULL, /*filterarg*/NULL,
4862                                PAGE_SIZE, /*nsegments*/1,
4863                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
4864                                /*flags*/0, &scb_data->sg_dmat) != 0) {
4865                 goto error_exit;
4866         }
4867
4868         scb_data->init_level++;
4869
4870         /* Perform initial CCB allocation */
4871         memset(scb_data->hscbs, 0,
4872                AHC_SCB_MAX_ALLOC * sizeof(struct hardware_scb));
4873         ahc_alloc_scbs(ahc);
4874
4875         if (scb_data->numscbs == 0) {
4876                 printk("%s: ahc_init_scbdata - "
4877                        "Unable to allocate initial scbs\n",
4878                        ahc_name(ahc));
4879                 goto error_exit;
4880         }
4881
4882         /*
4883          * Reserve the next queued SCB.
4884          */
4885         ahc->next_queued_scb = ahc_get_scb(ahc);
4886
4887         /*
4888          * Note that we were successful
4889          */
4890         return (0);
4891
4892 error_exit:
4893
4894         return (ENOMEM);
4895 }
4896
4897 static void
4898 ahc_fini_scbdata(struct ahc_softc *ahc)
4899 {
4900         struct scb_data *scb_data;
4901
4902         scb_data = ahc->scb_data;
4903         if (scb_data == NULL)
4904                 return;
4905
4906         switch (scb_data->init_level) {
4907         default:
4908         case 7:
4909         {
4910                 struct sg_map_node *sg_map;
4911
4912                 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps))!= NULL) {
4913                         SLIST_REMOVE_HEAD(&scb_data->sg_maps, links);
4914                         ahc_dmamap_unload(ahc, scb_data->sg_dmat,
4915                                           sg_map->sg_dmamap);
4916                         ahc_dmamem_free(ahc, scb_data->sg_dmat,
4917                                         sg_map->sg_vaddr,
4918                                         sg_map->sg_dmamap);
4919                         kfree(sg_map);
4920                 }
4921                 ahc_dma_tag_destroy(ahc, scb_data->sg_dmat);
4922         }
4923                 /* fall through */
4924         case 6:
4925                 ahc_dmamap_unload(ahc, scb_data->sense_dmat,
4926                                   scb_data->sense_dmamap);
4927                 /* fall through */
4928         case 5:
4929                 ahc_dmamem_free(ahc, scb_data->sense_dmat, scb_data->sense,
4930                                 scb_data->sense_dmamap);
4931                 ahc_dmamap_destroy(ahc, scb_data->sense_dmat,
4932                                    scb_data->sense_dmamap);
4933                 /* fall through */
4934         case 4:
4935                 ahc_dma_tag_destroy(ahc, scb_data->sense_dmat);
4936                 /* fall through */
4937         case 3:
4938                 ahc_dmamap_unload(ahc, scb_data->hscb_dmat,
4939                                   scb_data->hscb_dmamap);
4940                 /* fall through */
4941         case 2:
4942                 ahc_dmamem_free(ahc, scb_data->hscb_dmat, scb_data->hscbs,
4943                                 scb_data->hscb_dmamap);
4944                 ahc_dmamap_destroy(ahc, scb_data->hscb_dmat,
4945                                    scb_data->hscb_dmamap);
4946                 /* fall through */
4947         case 1:
4948                 ahc_dma_tag_destroy(ahc, scb_data->hscb_dmat);
4949                 break;
4950         case 0:
4951                 break;
4952         }
4953         if (scb_data->scbarray != NULL)
4954                 kfree(scb_data->scbarray);
4955 }
4956
4957 static void
4958 ahc_alloc_scbs(struct ahc_softc *ahc)
4959 {
4960         struct scb_data *scb_data;
4961         struct scb *next_scb;
4962         struct sg_map_node *sg_map;
4963         dma_addr_t physaddr;
4964         struct ahc_dma_seg *segs;
4965         int newcount;
4966         int i;
4967
4968         scb_data = ahc->scb_data;
4969         if (scb_data->numscbs >= AHC_SCB_MAX_ALLOC)
4970                 /* Can't allocate any more */
4971                 return;
4972
4973         next_scb = &scb_data->scbarray[scb_data->numscbs];
4974
4975         sg_map = kmalloc(sizeof(*sg_map), GFP_ATOMIC);
4976
4977         if (sg_map == NULL)
4978                 return;
4979
4980         /* Allocate S/G space for the next batch of SCBS */
4981         if (ahc_dmamem_alloc(ahc, scb_data->sg_dmat,
4982                              (void **)&sg_map->sg_vaddr,
4983                              BUS_DMA_NOWAIT, &sg_map->sg_dmamap) != 0) {
4984                 kfree(sg_map);
4985                 return;
4986         }
4987
4988         SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links);
4989
4990         ahc_dmamap_load(ahc, scb_data->sg_dmat, sg_map->sg_dmamap,
4991                         sg_map->sg_vaddr, PAGE_SIZE, ahc_dmamap_cb,
4992                         &sg_map->sg_physaddr, /*flags*/0);
4993
4994         segs = sg_map->sg_vaddr;
4995         physaddr = sg_map->sg_physaddr;
4996
4997         newcount = (PAGE_SIZE / (AHC_NSEG * sizeof(struct ahc_dma_seg)));
4998         newcount = min(newcount, (AHC_SCB_MAX_ALLOC - scb_data->numscbs));
4999         for (i = 0; i < newcount; i++) {
5000                 struct scb_platform_data *pdata;
5001
5002                 pdata = kmalloc(sizeof(*pdata), GFP_ATOMIC);
5003                 if (pdata == NULL)
5004                         break;
5005                 next_scb->platform_data = pdata;
5006                 next_scb->sg_map = sg_map;
5007                 next_scb->sg_list = segs;
5008                 /*
5009                  * The sequencer always starts with the second entry.
5010                  * The first entry is embedded in the scb.
5011                  */
5012                 next_scb->sg_list_phys = physaddr + sizeof(struct ahc_dma_seg);
5013                 next_scb->ahc_softc = ahc;
5014                 next_scb->flags = SCB_FREE;
5015                 next_scb->hscb = &scb_data->hscbs[scb_data->numscbs];
5016                 next_scb->hscb->tag = ahc->scb_data->numscbs;
5017                 SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs,
5018                                   next_scb, links.sle);
5019                 segs += AHC_NSEG;
5020                 physaddr += (AHC_NSEG * sizeof(struct ahc_dma_seg));
5021                 next_scb++;
5022                 ahc->scb_data->numscbs++;
5023         }
5024 }
5025
5026 void
5027 ahc_controller_info(struct ahc_softc *ahc, char *buf)
5028 {
5029         int len;
5030
5031         len = sprintf(buf, "%s: ", ahc_chip_names[ahc->chip & AHC_CHIPID_MASK]);
5032         buf += len;
5033         if ((ahc->features & AHC_TWIN) != 0)
5034                 len = sprintf(buf, "Twin Channel, A SCSI Id=%d, "
5035                               "B SCSI Id=%d, primary %c, ",
5036                               ahc->our_id, ahc->our_id_b,
5037                               (ahc->flags & AHC_PRIMARY_CHANNEL) + 'A');
5038         else {
5039                 const char *speed;
5040                 const char *type;
5041
5042                 speed = "";
5043                 if ((ahc->features & AHC_ULTRA) != 0) {
5044                         speed = "Ultra ";
5045                 } else if ((ahc->features & AHC_DT) != 0) {
5046                         speed = "Ultra160 ";
5047                 } else if ((ahc->features & AHC_ULTRA2) != 0) {
5048                         speed = "Ultra2 ";
5049                 }
5050                 if ((ahc->features & AHC_WIDE) != 0) {
5051                         type = "Wide";
5052                 } else {
5053                         type = "Single";
5054                 }
5055                 len = sprintf(buf, "%s%s Channel %c, SCSI Id=%d, ",
5056                               speed, type, ahc->channel, ahc->our_id);
5057         }
5058         buf += len;
5059
5060         if ((ahc->flags & AHC_PAGESCBS) != 0)
5061                 sprintf(buf, "%d/%d SCBs",
5062                         ahc->scb_data->maxhscbs, AHC_MAX_QUEUE);
5063         else
5064                 sprintf(buf, "%d SCBs", ahc->scb_data->maxhscbs);
5065 }
5066
5067 int
5068 ahc_chip_init(struct ahc_softc *ahc)
5069 {
5070         int      term;
5071         int      error;
5072         u_int    i;
5073         u_int    scsi_conf;
5074         u_int    scsiseq_template;
5075         uint32_t physaddr;
5076
5077         ahc_outb(ahc, SEQ_FLAGS, 0);
5078         ahc_outb(ahc, SEQ_FLAGS2, 0);
5079
5080         /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1, for both channels*/
5081         if (ahc->features & AHC_TWIN) {
5082
5083                 /*
5084                  * Setup Channel B first.
5085                  */
5086                 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) | SELBUSB);
5087                 term = (ahc->flags & AHC_TERM_ENB_B) != 0 ? STPWEN : 0;
5088                 ahc_outb(ahc, SCSIID, ahc->our_id_b);
5089                 scsi_conf = ahc_inb(ahc, SCSICONF + 1);
5090                 ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL))
5091                                         |term|ahc->seltime_b|ENSTIMER|ACTNEGEN);
5092                 if ((ahc->features & AHC_ULTRA2) != 0)
5093                         ahc_outb(ahc, SIMODE0, ahc_inb(ahc, SIMODE0)|ENIOERR);
5094                 ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);
5095                 ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN);
5096
5097                 /* Select Channel A */
5098                 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~SELBUSB);
5099         }
5100         term = (ahc->flags & AHC_TERM_ENB_A) != 0 ? STPWEN : 0;
5101         if ((ahc->features & AHC_ULTRA2) != 0)
5102                 ahc_outb(ahc, SCSIID_ULTRA2, ahc->our_id);
5103         else
5104                 ahc_outb(ahc, SCSIID, ahc->our_id);
5105         scsi_conf = ahc_inb(ahc, SCSICONF);
5106         ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL))
5107                                 |term|ahc->seltime
5108                                 |ENSTIMER|ACTNEGEN);
5109         if ((ahc->features & AHC_ULTRA2) != 0)
5110                 ahc_outb(ahc, SIMODE0, ahc_inb(ahc, SIMODE0)|ENIOERR);
5111         ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);
5112         ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN);
5113
5114         /* There are no untagged SCBs active yet. */
5115         for (i = 0; i < 16; i++) {
5116                 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, 0));
5117                 if ((ahc->flags & AHC_SCB_BTT) != 0) {
5118                         int lun;
5119
5120                         /*
5121                          * The SCB based BTT allows an entry per
5122                          * target and lun pair.
5123                          */
5124                         for (lun = 1; lun < AHC_NUM_LUNS; lun++)
5125                                 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, lun));
5126                 }
5127         }
5128
5129         /* All of our queues are empty */
5130         for (i = 0; i < 256; i++)
5131                 ahc->qoutfifo[i] = SCB_LIST_NULL;
5132         ahc_sync_qoutfifo(ahc, BUS_DMASYNC_PREREAD);
5133
5134         for (i = 0; i < 256; i++)
5135                 ahc->qinfifo[i] = SCB_LIST_NULL;
5136
5137         if ((ahc->features & AHC_MULTI_TID) != 0) {
5138                 ahc_outb(ahc, TARGID, 0);
5139                 ahc_outb(ahc, TARGID + 1, 0);
5140         }
5141
5142         /*
5143          * Tell the sequencer where it can find our arrays in memory.
5144          */
5145         physaddr = ahc->scb_data->hscb_busaddr;
5146         ahc_outb(ahc, HSCB_ADDR, physaddr & 0xFF);
5147         ahc_outb(ahc, HSCB_ADDR + 1, (physaddr >> 8) & 0xFF);
5148         ahc_outb(ahc, HSCB_ADDR + 2, (physaddr >> 16) & 0xFF);
5149         ahc_outb(ahc, HSCB_ADDR + 3, (physaddr >> 24) & 0xFF);
5150
5151         physaddr = ahc->shared_data_busaddr;
5152         ahc_outb(ahc, SHARED_DATA_ADDR, physaddr & 0xFF);
5153         ahc_outb(ahc, SHARED_DATA_ADDR + 1, (physaddr >> 8) & 0xFF);
5154         ahc_outb(ahc, SHARED_DATA_ADDR + 2, (physaddr >> 16) & 0xFF);
5155         ahc_outb(ahc, SHARED_DATA_ADDR + 3, (physaddr >> 24) & 0xFF);
5156
5157         /*
5158          * Initialize the group code to command length table.
5159          * This overrides the values in TARG_SCSIRATE, so only
5160          * setup the table after we have processed that information.
5161          */
5162         ahc_outb(ahc, CMDSIZE_TABLE, 5);
5163         ahc_outb(ahc, CMDSIZE_TABLE + 1, 9);
5164         ahc_outb(ahc, CMDSIZE_TABLE + 2, 9);
5165         ahc_outb(ahc, CMDSIZE_TABLE + 3, 0);
5166         ahc_outb(ahc, CMDSIZE_TABLE + 4, 15);
5167         ahc_outb(ahc, CMDSIZE_TABLE + 5, 11);
5168         ahc_outb(ahc, CMDSIZE_TABLE + 6, 0);
5169         ahc_outb(ahc, CMDSIZE_TABLE + 7, 0);
5170
5171         if ((ahc->features & AHC_HS_MAILBOX) != 0)
5172                 ahc_outb(ahc, HS_MAILBOX, 0);
5173
5174         /* Tell the sequencer of our initial queue positions */
5175         if ((ahc->features & AHC_TARGETMODE) != 0) {
5176                 ahc->tqinfifonext = 1;
5177                 ahc_outb(ahc, KERNEL_TQINPOS, ahc->tqinfifonext - 1);
5178                 ahc_outb(ahc, TQINPOS, ahc->tqinfifonext);
5179         }
5180         ahc->qinfifonext = 0;
5181         ahc->qoutfifonext = 0;
5182         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
5183                 ahc_outb(ahc, QOFF_CTLSTA, SCB_QSIZE_256);
5184                 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
5185                 ahc_outb(ahc, SNSCB_QOFF, ahc->qinfifonext);
5186                 ahc_outb(ahc, SDSCB_QOFF, 0);
5187         } else {
5188                 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
5189                 ahc_outb(ahc, QINPOS, ahc->qinfifonext);
5190                 ahc_outb(ahc, QOUTPOS, ahc->qoutfifonext);
5191         }
5192
5193         /* We don't have any waiting selections */
5194         ahc_outb(ahc, WAITING_SCBH, SCB_LIST_NULL);
5195
5196         /* Our disconnection list is empty too */
5197         ahc_outb(ahc, DISCONNECTED_SCBH, SCB_LIST_NULL);
5198
5199         /* Message out buffer starts empty */
5200         ahc_outb(ahc, MSG_OUT, MSG_NOOP);
5201
5202         /*
5203          * Setup the allowed SCSI Sequences based on operational mode.
5204          * If we are a target, we'll enable select in operations once
5205          * we've had a lun enabled.
5206          */
5207         scsiseq_template = ENSELO|ENAUTOATNO|ENAUTOATNP;
5208         if ((ahc->flags & AHC_INITIATORROLE) != 0)
5209                 scsiseq_template |= ENRSELI;
5210         ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq_template);
5211
5212         /* Initialize our list of free SCBs. */
5213         ahc_build_free_scb_list(ahc);
5214
5215         /*
5216          * Tell the sequencer which SCB will be the next one it receives.
5217          */
5218         ahc_outb(ahc, NEXT_QUEUED_SCB, ahc->next_queued_scb->hscb->tag);
5219
5220         /*
5221          * Load the Sequencer program and Enable the adapter
5222          * in "fast" mode.
5223          */
5224         if (bootverbose)
5225                 printk("%s: Downloading Sequencer Program...",
5226                        ahc_name(ahc));
5227
5228         error = ahc_loadseq(ahc);
5229         if (error != 0)
5230                 return (error);
5231
5232         if ((ahc->features & AHC_ULTRA2) != 0) {
5233                 int wait;
5234
5235                 /*
5236                  * Wait for up to 500ms for our transceivers
5237                  * to settle.  If the adapter does not have
5238                  * a cable attached, the transceivers may
5239                  * never settle, so don't complain if we
5240                  * fail here.
5241                  */
5242                 for (wait = 5000;
5243                      (ahc_inb(ahc, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait;
5244                      wait--)
5245                         ahc_delay(100);
5246         }
5247         ahc_restart(ahc);
5248         return (0);
5249 }
5250
5251 /*
5252  * Start the board, ready for normal operation
5253  */
5254 int
5255 ahc_init(struct ahc_softc *ahc)
5256 {
5257         int      max_targ;
5258         u_int    i;
5259         u_int    scsi_conf;
5260         u_int    ultraenb;
5261         u_int    discenable;
5262         u_int    tagenable;
5263         size_t   driver_data_size;
5264
5265 #ifdef AHC_DEBUG
5266         if ((ahc_debug & AHC_DEBUG_SEQUENCER) != 0)
5267                 ahc->flags |= AHC_SEQUENCER_DEBUG;
5268 #endif
5269
5270 #ifdef AHC_PRINT_SRAM
5271         printk("Scratch Ram:");
5272         for (i = 0x20; i < 0x5f; i++) {
5273                 if (((i % 8) == 0) && (i != 0)) {
5274                         printk ("\n              ");
5275                 }
5276                 printk (" 0x%x", ahc_inb(ahc, i));
5277         }
5278         if ((ahc->features & AHC_MORE_SRAM) != 0) {
5279                 for (i = 0x70; i < 0x7f; i++) {
5280                         if (((i % 8) == 0) && (i != 0)) {
5281                                 printk ("\n              ");
5282                         }
5283                         printk (" 0x%x", ahc_inb(ahc, i));
5284                 }
5285         }
5286         printk ("\n");
5287         /*
5288          * Reading uninitialized scratch ram may
5289          * generate parity errors.
5290          */
5291         ahc_outb(ahc, CLRINT, CLRPARERR);
5292         ahc_outb(ahc, CLRINT, CLRBRKADRINT);
5293 #endif
5294         max_targ = 15;
5295
5296         /*
5297          * Assume we have a board at this stage and it has been reset.
5298          */
5299         if ((ahc->flags & AHC_USEDEFAULTS) != 0)
5300                 ahc->our_id = ahc->our_id_b = 7;
5301
5302         /*
5303          * Default to allowing initiator operations.
5304          */
5305         ahc->flags |= AHC_INITIATORROLE;
5306
5307         /*
5308          * Only allow target mode features if this unit has them enabled.
5309          */
5310         if ((AHC_TMODE_ENABLE & (0x1 << ahc->unit)) == 0)
5311                 ahc->features &= ~AHC_TARGETMODE;
5312
5313         ahc->init_level++;
5314
5315         /*
5316          * DMA tag for our command fifos and other data in system memory
5317          * the card's sequencer must be able to access.  For initiator
5318          * roles, we need to allocate space for the qinfifo and qoutfifo.
5319          * The qinfifo and qoutfifo are composed of 256 1 byte elements.
5320          * When providing for the target mode role, we must additionally
5321          * provide space for the incoming target command fifo and an extra
5322          * byte to deal with a dma bug in some chip versions.
5323          */
5324         driver_data_size = 2 * 256 * sizeof(uint8_t);
5325         if ((ahc->features & AHC_TARGETMODE) != 0)
5326                 driver_data_size += AHC_TMODE_CMDS * sizeof(struct target_cmd)
5327                                  + /*DMA WideOdd Bug Buffer*/1;
5328         if (ahc_dma_tag_create(ahc, ahc->parent_dmat, /*alignment*/1,
5329                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
5330                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
5331                                /*highaddr*/BUS_SPACE_MAXADDR,
5332                                /*filter*/NULL, /*filterarg*/NULL,
5333                                driver_data_size,
5334                                /*nsegments*/1,
5335                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
5336                                /*flags*/0, &ahc->shared_data_dmat) != 0) {
5337                 return (ENOMEM);
5338         }
5339
5340         ahc->init_level++;
5341
5342         /* Allocation of driver data */
5343         if (ahc_dmamem_alloc(ahc, ahc->shared_data_dmat,
5344                              (void **)&ahc->qoutfifo,
5345                              BUS_DMA_NOWAIT, &ahc->shared_data_dmamap) != 0) {
5346                 return (ENOMEM);
5347         }
5348
5349         ahc->init_level++;
5350
5351         /* And permanently map it in */
5352         ahc_dmamap_load(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
5353                         ahc->qoutfifo, driver_data_size, ahc_dmamap_cb,
5354                         &ahc->shared_data_busaddr, /*flags*/0);
5355
5356         if ((ahc->features & AHC_TARGETMODE) != 0) {
5357                 ahc->targetcmds = (struct target_cmd *)ahc->qoutfifo;
5358                 ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[AHC_TMODE_CMDS];
5359                 ahc->dma_bug_buf = ahc->shared_data_busaddr
5360                                  + driver_data_size - 1;
5361                 /* All target command blocks start out invalid. */
5362                 for (i = 0; i < AHC_TMODE_CMDS; i++)
5363                         ahc->targetcmds[i].cmd_valid = 0;
5364                 ahc_sync_tqinfifo(ahc, BUS_DMASYNC_PREREAD);
5365                 ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[256];
5366         }
5367         ahc->qinfifo = &ahc->qoutfifo[256];
5368
5369         ahc->init_level++;
5370
5371         /* Allocate SCB data now that buffer_dmat is initialized */
5372         if (ahc->scb_data->maxhscbs == 0)
5373                 if (ahc_init_scbdata(ahc) != 0)
5374                         return (ENOMEM);
5375
5376         /*
5377          * Allocate a tstate to house information for our
5378          * initiator presence on the bus as well as the user
5379          * data for any target mode initiator.
5380          */
5381         if (ahc_alloc_tstate(ahc, ahc->our_id, 'A') == NULL) {
5382                 printk("%s: unable to allocate ahc_tmode_tstate.  "
5383                        "Failing attach\n", ahc_name(ahc));
5384                 return (ENOMEM);
5385         }
5386
5387         if ((ahc->features & AHC_TWIN) != 0) {
5388                 if (ahc_alloc_tstate(ahc, ahc->our_id_b, 'B') == NULL) {
5389                         printk("%s: unable to allocate ahc_tmode_tstate.  "
5390                                "Failing attach\n", ahc_name(ahc));
5391                         return (ENOMEM);
5392                 }
5393         }
5394
5395         if (ahc->scb_data->maxhscbs < AHC_SCB_MAX_ALLOC) {
5396                 ahc->flags |= AHC_PAGESCBS;
5397         } else {
5398                 ahc->flags &= ~AHC_PAGESCBS;
5399         }
5400
5401 #ifdef AHC_DEBUG
5402         if (ahc_debug & AHC_SHOW_MISC) {
5403                 printk("%s: hardware scb %u bytes; kernel scb %u bytes; "
5404                        "ahc_dma %u bytes\n",
5405                         ahc_name(ahc),
5406                         (u_int)sizeof(struct hardware_scb),
5407                         (u_int)sizeof(struct scb),
5408                         (u_int)sizeof(struct ahc_dma_seg));
5409         }
5410 #endif /* AHC_DEBUG */
5411
5412         /*
5413          * Look at the information that board initialization or
5414          * the board bios has left us.
5415          */
5416         if (ahc->features & AHC_TWIN) {
5417                 scsi_conf = ahc_inb(ahc, SCSICONF + 1);
5418                 if ((scsi_conf & RESET_SCSI) != 0
5419                  && (ahc->flags & AHC_INITIATORROLE) != 0)
5420                         ahc->flags |= AHC_RESET_BUS_B;
5421         }
5422
5423         scsi_conf = ahc_inb(ahc, SCSICONF);
5424         if ((scsi_conf & RESET_SCSI) != 0
5425          && (ahc->flags & AHC_INITIATORROLE) != 0)
5426                 ahc->flags |= AHC_RESET_BUS_A;
5427
5428         ultraenb = 0;
5429         tagenable = ALL_TARGETS_MASK;
5430
5431         /* Grab the disconnection disable table and invert it for our needs */
5432         if ((ahc->flags & AHC_USEDEFAULTS) != 0) {
5433                 printk("%s: Host Adapter Bios disabled.  Using default SCSI "
5434                         "device parameters\n", ahc_name(ahc));
5435                 ahc->flags |= AHC_EXTENDED_TRANS_A|AHC_EXTENDED_TRANS_B|
5436                               AHC_TERM_ENB_A|AHC_TERM_ENB_B;
5437                 discenable = ALL_TARGETS_MASK;
5438                 if ((ahc->features & AHC_ULTRA) != 0)
5439                         ultraenb = ALL_TARGETS_MASK;
5440         } else {
5441                 discenable = ~((ahc_inb(ahc, DISC_DSB + 1) << 8)
5442                            | ahc_inb(ahc, DISC_DSB));
5443                 if ((ahc->features & (AHC_ULTRA|AHC_ULTRA2)) != 0)
5444                         ultraenb = (ahc_inb(ahc, ULTRA_ENB + 1) << 8)
5445                                       | ahc_inb(ahc, ULTRA_ENB);
5446         }
5447
5448         if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0)
5449                 max_targ = 7;
5450
5451         for (i = 0; i <= max_targ; i++) {
5452                 struct ahc_initiator_tinfo *tinfo;
5453                 struct ahc_tmode_tstate *tstate;
5454                 u_int our_id;
5455                 u_int target_id;
5456                 char channel;
5457
5458                 channel = 'A';
5459                 our_id = ahc->our_id;
5460                 target_id = i;
5461                 if (i > 7 && (ahc->features & AHC_TWIN) != 0) {
5462                         channel = 'B';
5463                         our_id = ahc->our_id_b;
5464                         target_id = i % 8;
5465                 }
5466                 tinfo = ahc_fetch_transinfo(ahc, channel, our_id,
5467                                             target_id, &tstate);
5468                 /* Default to async narrow across the board */
5469                 memset(tinfo, 0, sizeof(*tinfo));
5470                 if (ahc->flags & AHC_USEDEFAULTS) {
5471                         if ((ahc->features & AHC_WIDE) != 0)
5472                                 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;
5473
5474                         /*
5475                          * These will be truncated when we determine the
5476                          * connection type we have with the target.
5477                          */
5478                         tinfo->user.period = ahc_syncrates->period;
5479                         tinfo->user.offset = MAX_OFFSET;
5480                 } else {
5481                         u_int scsirate;
5482                         uint16_t mask;
5483
5484                         /* Take the settings leftover in scratch RAM. */
5485                         scsirate = ahc_inb(ahc, TARG_SCSIRATE + i);
5486                         mask = (0x01 << i);
5487                         if ((ahc->features & AHC_ULTRA2) != 0) {
5488                                 u_int offset;
5489                                 u_int maxsync;
5490
5491                                 if ((scsirate & SOFS) == 0x0F) {
5492                                         /*
5493                                          * Haven't negotiated yet,
5494                                          * so the format is different.
5495                                          */
5496                                         scsirate = (scsirate & SXFR) >> 4
5497                                                  | (ultraenb & mask)
5498                                                   ? 0x08 : 0x0
5499                                                  | (scsirate & WIDEXFER);
5500                                         offset = MAX_OFFSET_ULTRA2;
5501                                 } else
5502                                         offset = ahc_inb(ahc, TARG_OFFSET + i);
5503                                 if ((scsirate & ~WIDEXFER) == 0 && offset != 0)
5504                                         /* Set to the lowest sync rate, 5MHz */
5505                                         scsirate |= 0x1c;
5506                                 maxsync = AHC_SYNCRATE_ULTRA2;
5507                                 if ((ahc->features & AHC_DT) != 0)
5508                                         maxsync = AHC_SYNCRATE_DT;
5509                                 tinfo->user.period =
5510                                     ahc_find_period(ahc, scsirate, maxsync);
5511                                 if (offset == 0)
5512                                         tinfo->user.period = 0;
5513                                 else
5514                                         tinfo->user.offset = MAX_OFFSET;
5515                                 if ((scsirate & SXFR_ULTRA2) <= 8/*10MHz*/
5516                                  && (ahc->features & AHC_DT) != 0)
5517                                         tinfo->user.ppr_options =
5518                                             MSG_EXT_PPR_DT_REQ;
5519                         } else if ((scsirate & SOFS) != 0) {
5520                                 if ((scsirate & SXFR) == 0x40
5521                                  && (ultraenb & mask) != 0) {
5522                                         /* Treat 10MHz as a non-ultra speed */
5523                                         scsirate &= ~SXFR;
5524                                         ultraenb &= ~mask;
5525                                 }
5526                                 tinfo->user.period =
5527                                     ahc_find_period(ahc, scsirate,
5528                                                     (ultraenb & mask)
5529                                                    ? AHC_SYNCRATE_ULTRA
5530                                                    : AHC_SYNCRATE_FAST);
5531                                 if (tinfo->user.period != 0)
5532                                         tinfo->user.offset = MAX_OFFSET;
5533                         }
5534                         if (tinfo->user.period == 0)
5535                                 tinfo->user.offset = 0;
5536                         if ((scsirate & WIDEXFER) != 0
5537                          && (ahc->features & AHC_WIDE) != 0)
5538                                 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;
5539                         tinfo->user.protocol_version = 4;
5540                         if ((ahc->features & AHC_DT) != 0)
5541                                 tinfo->user.transport_version = 3;
5542                         else
5543                                 tinfo->user.transport_version = 2;
5544                         tinfo->goal.protocol_version = 2;
5545                         tinfo->goal.transport_version = 2;
5546                         tinfo->curr.protocol_version = 2;
5547                         tinfo->curr.transport_version = 2;
5548                 }
5549                 tstate->ultraenb = 0;
5550         }
5551         ahc->user_discenable = discenable;
5552         ahc->user_tagenable = tagenable;
5553
5554         return (ahc->bus_chip_init(ahc));
5555 }
5556
5557 void
5558 ahc_intr_enable(struct ahc_softc *ahc, int enable)
5559 {
5560         u_int hcntrl;
5561
5562         hcntrl = ahc_inb(ahc, HCNTRL);
5563         hcntrl &= ~INTEN;
5564         ahc->pause &= ~INTEN;
5565         ahc->unpause &= ~INTEN;
5566         if (enable) {
5567                 hcntrl |= INTEN;
5568                 ahc->pause |= INTEN;
5569                 ahc->unpause |= INTEN;
5570         }
5571         ahc_outb(ahc, HCNTRL, hcntrl);
5572 }
5573
5574 /*
5575  * Ensure that the card is paused in a location
5576  * outside of all critical sections and that all
5577  * pending work is completed prior to returning.
5578  * This routine should only be called from outside
5579  * an interrupt context.
5580  */
5581 void
5582 ahc_pause_and_flushwork(struct ahc_softc *ahc)
5583 {
5584         int intstat;
5585         int maxloops;
5586         int paused;
5587
5588         maxloops = 1000;
5589         ahc->flags |= AHC_ALL_INTERRUPTS;
5590         paused = FALSE;
5591         do {
5592                 if (paused) {
5593                         ahc_unpause(ahc);
5594                         /*
5595                          * Give the sequencer some time to service
5596                          * any active selections.
5597                          */
5598                         ahc_delay(500);
5599                 }
5600                 ahc_intr(ahc);
5601                 ahc_pause(ahc);
5602                 paused = TRUE;
5603                 ahc_outb(ahc, SCSISEQ, ahc_inb(ahc, SCSISEQ) & ~ENSELO);
5604                 intstat = ahc_inb(ahc, INTSTAT);
5605                 if ((intstat & INT_PEND) == 0) {
5606                         ahc_clear_critical_section(ahc);
5607                         intstat = ahc_inb(ahc, INTSTAT);
5608                 }
5609         } while (--maxloops
5610               && (intstat != 0xFF || (ahc->features & AHC_REMOVABLE) == 0)
5611               && ((intstat & INT_PEND) != 0
5612                || (ahc_inb(ahc, SSTAT0) & (SELDO|SELINGO)) != 0));
5613         if (maxloops == 0) {
5614                 printk("Infinite interrupt loop, INTSTAT = %x",
5615                        ahc_inb(ahc, INTSTAT));
5616         }
5617         ahc_platform_flushwork(ahc);
5618         ahc->flags &= ~AHC_ALL_INTERRUPTS;
5619 }
5620
5621 #ifdef CONFIG_PM
5622 int
5623 ahc_suspend(struct ahc_softc *ahc)
5624 {
5625
5626         ahc_pause_and_flushwork(ahc);
5627
5628         if (LIST_FIRST(&ahc->pending_scbs) != NULL) {
5629                 ahc_unpause(ahc);
5630                 return (EBUSY);
5631         }
5632
5633 #ifdef AHC_TARGET_MODE
5634         /*
5635          * XXX What about ATIOs that have not yet been serviced?
5636          * Perhaps we should just refuse to be suspended if we
5637          * are acting in a target role.
5638          */
5639         if (ahc->pending_device != NULL) {
5640                 ahc_unpause(ahc);
5641                 return (EBUSY);
5642         }
5643 #endif
5644         ahc_shutdown(ahc);
5645         return (0);
5646 }
5647
5648 int
5649 ahc_resume(struct ahc_softc *ahc)
5650 {
5651
5652         ahc_reset(ahc, /*reinit*/TRUE);
5653         ahc_intr_enable(ahc, TRUE);
5654         ahc_restart(ahc);
5655         return (0);
5656 }
5657 #endif
5658 /************************** Busy Target Table *********************************/
5659 /*
5660  * Return the untagged transaction id for a given target/channel lun.
5661  * Optionally, clear the entry.
5662  */
5663 static u_int
5664 ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl)
5665 {
5666         u_int scbid;
5667         u_int target_offset;
5668
5669         if ((ahc->flags & AHC_SCB_BTT) != 0) {
5670                 u_int saved_scbptr;
5671
5672                 saved_scbptr = ahc_inb(ahc, SCBPTR);
5673                 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl));
5674                 scbid = ahc_inb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl));
5675                 ahc_outb(ahc, SCBPTR, saved_scbptr);
5676         } else {
5677                 target_offset = TCL_TARGET_OFFSET(tcl);
5678                 scbid = ahc_inb(ahc, BUSY_TARGETS + target_offset);
5679         }
5680
5681         return (scbid);
5682 }
5683
5684 static void
5685 ahc_unbusy_tcl(struct ahc_softc *ahc, u_int tcl)
5686 {
5687         u_int target_offset;
5688
5689         if ((ahc->flags & AHC_SCB_BTT) != 0) {
5690                 u_int saved_scbptr;
5691
5692                 saved_scbptr = ahc_inb(ahc, SCBPTR);
5693                 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl));
5694                 ahc_outb(ahc, SCB_64_BTT+TCL_TARGET_OFFSET(tcl), SCB_LIST_NULL);
5695                 ahc_outb(ahc, SCBPTR, saved_scbptr);
5696         } else {
5697                 target_offset = TCL_TARGET_OFFSET(tcl);
5698                 ahc_outb(ahc, BUSY_TARGETS + target_offset, SCB_LIST_NULL);
5699         }
5700 }
5701
5702 static void
5703 ahc_busy_tcl(struct ahc_softc *ahc, u_int tcl, u_int scbid)
5704 {
5705         u_int target_offset;
5706
5707         if ((ahc->flags & AHC_SCB_BTT) != 0) {
5708                 u_int saved_scbptr;
5709
5710                 saved_scbptr = ahc_inb(ahc, SCBPTR);
5711                 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl));
5712                 ahc_outb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl), scbid);
5713                 ahc_outb(ahc, SCBPTR, saved_scbptr);
5714         } else {
5715                 target_offset = TCL_TARGET_OFFSET(tcl);
5716                 ahc_outb(ahc, BUSY_TARGETS + target_offset, scbid);
5717         }
5718 }
5719
5720 /************************** SCB and SCB queue management **********************/
5721 int
5722 ahc_match_scb(struct ahc_softc *ahc, struct scb *scb, int target,
5723               char channel, int lun, u_int tag, role_t role)
5724 {
5725         int targ = SCB_GET_TARGET(ahc, scb);
5726         char chan = SCB_GET_CHANNEL(ahc, scb);
5727         int slun = SCB_GET_LUN(scb);
5728         int match;
5729
5730         match = ((chan == channel) || (channel == ALL_CHANNELS));
5731         if (match != 0)
5732                 match = ((targ == target) || (target == CAM_TARGET_WILDCARD));
5733         if (match != 0)
5734                 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD));
5735         if (match != 0) {
5736 #ifdef AHC_TARGET_MODE
5737                 int group;
5738
5739                 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code);
5740                 if (role == ROLE_INITIATOR) {
5741                         match = (group != XPT_FC_GROUP_TMODE)
5742                               && ((tag == scb->hscb->tag)
5743                                || (tag == SCB_LIST_NULL));
5744                 } else if (role == ROLE_TARGET) {
5745                         match = (group == XPT_FC_GROUP_TMODE)
5746                               && ((tag == scb->io_ctx->csio.tag_id)
5747                                || (tag == SCB_LIST_NULL));
5748                 }
5749 #else /* !AHC_TARGET_MODE */
5750                 match = ((tag == scb->hscb->tag) || (tag == SCB_LIST_NULL));
5751 #endif /* AHC_TARGET_MODE */
5752         }
5753
5754         return match;
5755 }
5756
5757 static void
5758 ahc_freeze_devq(struct ahc_softc *ahc, struct scb *scb)
5759 {
5760         int     target;
5761         char    channel;
5762         int     lun;
5763
5764         target = SCB_GET_TARGET(ahc, scb);
5765         lun = SCB_GET_LUN(scb);
5766         channel = SCB_GET_CHANNEL(ahc, scb);
5767
5768         ahc_search_qinfifo(ahc, target, channel, lun,
5769                            /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN,
5770                            CAM_REQUEUE_REQ, SEARCH_COMPLETE);
5771
5772         ahc_platform_freeze_devq(ahc, scb);
5773 }
5774
5775 void
5776 ahc_qinfifo_requeue_tail(struct ahc_softc *ahc, struct scb *scb)
5777 {
5778         struct scb *prev_scb;
5779
5780         prev_scb = NULL;
5781         if (ahc_qinfifo_count(ahc) != 0) {
5782                 u_int prev_tag;
5783                 uint8_t prev_pos;
5784
5785                 prev_pos = ahc->qinfifonext - 1;
5786                 prev_tag = ahc->qinfifo[prev_pos];
5787                 prev_scb = ahc_lookup_scb(ahc, prev_tag);
5788         }
5789         ahc_qinfifo_requeue(ahc, prev_scb, scb);
5790         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
5791                 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
5792         } else {
5793                 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
5794         }
5795 }
5796
5797 static void
5798 ahc_qinfifo_requeue(struct ahc_softc *ahc, struct scb *prev_scb,
5799                     struct scb *scb)
5800 {
5801         if (prev_scb == NULL) {
5802                 ahc_outb(ahc, NEXT_QUEUED_SCB, scb->hscb->tag);
5803         } else {
5804                 prev_scb->hscb->next = scb->hscb->tag;
5805                 ahc_sync_scb(ahc, prev_scb,
5806                              BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
5807         }
5808         ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
5809         scb->hscb->next = ahc->next_queued_scb->hscb->tag;
5810         ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
5811 }
5812
5813 static int
5814 ahc_qinfifo_count(struct ahc_softc *ahc)
5815 {
5816         uint8_t qinpos;
5817         uint8_t diff;
5818
5819         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
5820                 qinpos = ahc_inb(ahc, SNSCB_QOFF);
5821                 ahc_outb(ahc, SNSCB_QOFF, qinpos);
5822         } else
5823                 qinpos = ahc_inb(ahc, QINPOS);
5824         diff = ahc->qinfifonext - qinpos;
5825         return (diff);
5826 }
5827
5828 int
5829 ahc_search_qinfifo(struct ahc_softc *ahc, int target, char channel,
5830                    int lun, u_int tag, role_t role, uint32_t status,
5831                    ahc_search_action action)
5832 {
5833         struct  scb *scb;
5834         struct  scb *prev_scb;
5835         uint8_t qinstart;
5836         uint8_t qinpos;
5837         uint8_t qintail;
5838         uint8_t next;
5839         uint8_t prev;
5840         uint8_t curscbptr;
5841         int     found;
5842         int     have_qregs;
5843
5844         qintail = ahc->qinfifonext;
5845         have_qregs = (ahc->features & AHC_QUEUE_REGS) != 0;
5846         if (have_qregs) {
5847                 qinstart = ahc_inb(ahc, SNSCB_QOFF);
5848                 ahc_outb(ahc, SNSCB_QOFF, qinstart);
5849         } else
5850                 qinstart = ahc_inb(ahc, QINPOS);
5851         qinpos = qinstart;
5852         found = 0;
5853         prev_scb = NULL;
5854
5855         if (action == SEARCH_COMPLETE) {
5856                 /*
5857                  * Don't attempt to run any queued untagged transactions
5858                  * until we are done with the abort process.
5859                  */
5860                 ahc_freeze_untagged_queues(ahc);
5861         }
5862
5863         /*
5864          * Start with an empty queue.  Entries that are not chosen
5865          * for removal will be re-added to the queue as we go.
5866          */
5867         ahc->qinfifonext = qinpos;
5868         ahc_outb(ahc, NEXT_QUEUED_SCB, ahc->next_queued_scb->hscb->tag);
5869
5870         while (qinpos != qintail) {
5871                 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qinpos]);
5872                 if (scb == NULL) {
5873                         printk("qinpos = %d, SCB index = %d\n",
5874                                 qinpos, ahc->qinfifo[qinpos]);
5875                         panic("Loop 1\n");
5876                 }
5877
5878                 if (ahc_match_scb(ahc, scb, target, channel, lun, tag, role)) {
5879                         /*
5880                          * We found an scb that needs to be acted on.
5881                          */
5882                         found++;
5883                         switch (action) {
5884                         case SEARCH_COMPLETE:
5885                         {
5886                                 cam_status ostat;
5887                                 cam_status cstat;
5888
5889                                 ostat = ahc_get_transaction_status(scb);
5890                                 if (ostat == CAM_REQ_INPROG)
5891                                         ahc_set_transaction_status(scb, status);
5892                                 cstat = ahc_get_transaction_status(scb);
5893                                 if (cstat != CAM_REQ_CMP)
5894                                         ahc_freeze_scb(scb);
5895                                 if ((scb->flags & SCB_ACTIVE) == 0)
5896                                         printk("Inactive SCB in qinfifo\n");
5897                                 ahc_done(ahc, scb);
5898
5899                                 /* FALLTHROUGH */
5900                         }
5901                         case SEARCH_REMOVE:
5902                                 break;
5903                         case SEARCH_COUNT:
5904                                 ahc_qinfifo_requeue(ahc, prev_scb, scb);
5905                                 prev_scb = scb;
5906                                 break;
5907                         }
5908                 } else {
5909                         ahc_qinfifo_requeue(ahc, prev_scb, scb);
5910                         prev_scb = scb;
5911                 }
5912                 qinpos++;
5913         }
5914
5915         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
5916                 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
5917         } else {
5918                 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
5919         }
5920
5921         if (action != SEARCH_COUNT
5922          && (found != 0)
5923          && (qinstart != ahc->qinfifonext)) {
5924                 /*
5925                  * The sequencer may be in the process of dmaing
5926                  * down the SCB at the beginning of the queue.
5927                  * This could be problematic if either the first,
5928                  * or the second SCB is removed from the queue
5929                  * (the first SCB includes a pointer to the "next"
5930                  * SCB to dma). If we have removed any entries, swap
5931                  * the first element in the queue with the next HSCB
5932                  * so the sequencer will notice that NEXT_QUEUED_SCB
5933                  * has changed during its dma attempt and will retry
5934                  * the DMA.
5935                  */
5936                 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qinstart]);
5937
5938                 if (scb == NULL) {
5939                         printk("found = %d, qinstart = %d, qinfifionext = %d\n",
5940                                 found, qinstart, ahc->qinfifonext);
5941                         panic("First/Second Qinfifo fixup\n");
5942                 }
5943                 /*
5944                  * ahc_swap_with_next_hscb forces our next pointer to
5945                  * point to the reserved SCB for future commands.  Save
5946                  * and restore our original next pointer to maintain
5947                  * queue integrity.
5948                  */
5949                 next = scb->hscb->next;
5950                 ahc->scb_data->scbindex[scb->hscb->tag] = NULL;
5951                 ahc_swap_with_next_hscb(ahc, scb);
5952                 scb->hscb->next = next;
5953                 ahc->qinfifo[qinstart] = scb->hscb->tag;
5954
5955                 /* Tell the card about the new head of the qinfifo. */
5956                 ahc_outb(ahc, NEXT_QUEUED_SCB, scb->hscb->tag);
5957
5958                 /* Fixup the tail "next" pointer. */
5959                 qintail = ahc->qinfifonext - 1;
5960                 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qintail]);
5961                 scb->hscb->next = ahc->next_queued_scb->hscb->tag;
5962         }
5963
5964         /*
5965          * Search waiting for selection list.
5966          */
5967         curscbptr = ahc_inb(ahc, SCBPTR);
5968         next = ahc_inb(ahc, WAITING_SCBH);  /* Start at head of list. */
5969         prev = SCB_LIST_NULL;
5970
5971         while (next != SCB_LIST_NULL) {
5972                 uint8_t scb_index;
5973
5974                 ahc_outb(ahc, SCBPTR, next);
5975                 scb_index = ahc_inb(ahc, SCB_TAG);
5976                 if (scb_index >= ahc->scb_data->numscbs) {
5977                         printk("Waiting List inconsistency. "
5978                                "SCB index == %d, yet numscbs == %d.",
5979                                scb_index, ahc->scb_data->numscbs);
5980                         ahc_dump_card_state(ahc);
5981                         panic("for safety");
5982                 }
5983                 scb = ahc_lookup_scb(ahc, scb_index);
5984                 if (scb == NULL) {
5985                         printk("scb_index = %d, next = %d\n",
5986                                 scb_index, next);
5987                         panic("Waiting List traversal\n");
5988                 }
5989                 if (ahc_match_scb(ahc, scb, target, channel,
5990                                   lun, SCB_LIST_NULL, role)) {
5991                         /*
5992                          * We found an scb that needs to be acted on.
5993                          */
5994                         found++;
5995                         switch (action) {
5996                         case SEARCH_COMPLETE:
5997                         {
5998                                 cam_status ostat;
5999                                 cam_status cstat;
6000
6001                                 ostat = ahc_get_transaction_status(scb);
6002                                 if (ostat == CAM_REQ_INPROG)
6003                                         ahc_set_transaction_status(scb,
6004                                                                    status);
6005                                 cstat = ahc_get_transaction_status(scb);
6006                                 if (cstat != CAM_REQ_CMP)
6007                                         ahc_freeze_scb(scb);
6008                                 if ((scb->flags & SCB_ACTIVE) == 0)
6009                                         printk("Inactive SCB in Waiting List\n");
6010                                 ahc_done(ahc, scb);
6011                         }
6012                                 /* fall through */
6013                         case SEARCH_REMOVE:
6014                                 next = ahc_rem_wscb(ahc, next, prev);
6015                                 break;
6016                         case SEARCH_COUNT:
6017                                 prev = next;
6018                                 next = ahc_inb(ahc, SCB_NEXT);
6019                                 break;
6020                         }
6021                 } else {
6022
6023                         prev = next;
6024                         next = ahc_inb(ahc, SCB_NEXT);
6025                 }
6026         }
6027         ahc_outb(ahc, SCBPTR, curscbptr);
6028
6029         found += ahc_search_untagged_queues(ahc, /*ahc_io_ctx_t*/NULL, target,
6030                                             channel, lun, status, action);
6031
6032         if (action == SEARCH_COMPLETE)
6033                 ahc_release_untagged_queues(ahc);
6034         return (found);
6035 }
6036
6037 int
6038 ahc_search_untagged_queues(struct ahc_softc *ahc, ahc_io_ctx_t ctx,
6039                            int target, char channel, int lun, uint32_t status,
6040                            ahc_search_action action)
6041 {
6042         struct  scb *scb;
6043         int     maxtarget;
6044         int     found;
6045         int     i;
6046
6047         if (action == SEARCH_COMPLETE) {
6048                 /*
6049                  * Don't attempt to run any queued untagged transactions
6050                  * until we are done with the abort process.
6051                  */
6052                 ahc_freeze_untagged_queues(ahc);
6053         }
6054
6055         found = 0;
6056         i = 0;
6057         if ((ahc->flags & AHC_SCB_BTT) == 0) {
6058
6059                 maxtarget = 16;
6060                 if (target != CAM_TARGET_WILDCARD) {
6061
6062                         i = target;
6063                         if (channel == 'B')
6064                                 i += 8;
6065                         maxtarget = i + 1;
6066                 }
6067         } else {
6068                 maxtarget = 0;
6069         }
6070
6071         for (; i < maxtarget; i++) {
6072                 struct scb_tailq *untagged_q;
6073                 struct scb *next_scb;
6074
6075                 untagged_q = &(ahc->untagged_queues[i]);
6076                 next_scb = TAILQ_FIRST(untagged_q);
6077                 while (next_scb != NULL) {
6078
6079                         scb = next_scb;
6080                         next_scb = TAILQ_NEXT(scb, links.tqe);
6081
6082                         /*
6083                          * The head of the list may be the currently
6084                          * active untagged command for a device.
6085                          * We're only searching for commands that
6086                          * have not been started.  A transaction
6087                          * marked active but still in the qinfifo
6088                          * is removed by the qinfifo scanning code
6089                          * above.
6090                          */
6091                         if ((scb->flags & SCB_ACTIVE) != 0)
6092                                 continue;
6093
6094                         if (ahc_match_scb(ahc, scb, target, channel, lun,
6095                                           SCB_LIST_NULL, ROLE_INITIATOR) == 0
6096                          || (ctx != NULL && ctx != scb->io_ctx))
6097                                 continue;
6098
6099                         /*
6100                          * We found an scb that needs to be acted on.
6101                          */
6102                         found++;
6103                         switch (action) {
6104                         case SEARCH_COMPLETE:
6105                         {
6106                                 cam_status ostat;
6107                                 cam_status cstat;
6108
6109                                 ostat = ahc_get_transaction_status(scb);
6110                                 if (ostat == CAM_REQ_INPROG)
6111                                         ahc_set_transaction_status(scb, status);
6112                                 cstat = ahc_get_transaction_status(scb);
6113                                 if (cstat != CAM_REQ_CMP)
6114                                         ahc_freeze_scb(scb);
6115                                 if ((scb->flags & SCB_ACTIVE) == 0)
6116                                         printk("Inactive SCB in untaggedQ\n");
6117                                 ahc_done(ahc, scb);
6118                                 break;
6119                         }
6120                         case SEARCH_REMOVE:
6121                                 scb->flags &= ~SCB_UNTAGGEDQ;
6122                                 TAILQ_REMOVE(untagged_q, scb, links.tqe);
6123                                 break;
6124                         case SEARCH_COUNT:
6125                                 break;
6126                         }
6127                 }
6128         }
6129
6130         if (action == SEARCH_COMPLETE)
6131                 ahc_release_untagged_queues(ahc);
6132         return (found);
6133 }
6134
6135 int
6136 ahc_search_disc_list(struct ahc_softc *ahc, int target, char channel,
6137                      int lun, u_int tag, int stop_on_first, int remove,
6138                      int save_state)
6139 {
6140         struct  scb *scbp;
6141         u_int   next;
6142         u_int   prev;
6143         u_int   count;
6144         u_int   active_scb;
6145
6146         count = 0;
6147         next = ahc_inb(ahc, DISCONNECTED_SCBH);
6148         prev = SCB_LIST_NULL;
6149
6150         if (save_state) {
6151                 /* restore this when we're done */
6152                 active_scb = ahc_inb(ahc, SCBPTR);
6153         } else
6154                 /* Silence compiler */
6155                 active_scb = SCB_LIST_NULL;
6156
6157         while (next != SCB_LIST_NULL) {
6158                 u_int scb_index;
6159
6160                 ahc_outb(ahc, SCBPTR, next);
6161                 scb_index = ahc_inb(ahc, SCB_TAG);
6162                 if (scb_index >= ahc->scb_data->numscbs) {
6163                         printk("Disconnected List inconsistency. "
6164                                "SCB index == %d, yet numscbs == %d.",
6165                                scb_index, ahc->scb_data->numscbs);
6166                         ahc_dump_card_state(ahc);
6167                         panic("for safety");
6168                 }
6169
6170                 if (next == prev) {
6171                         panic("Disconnected List Loop. "
6172                               "cur SCBPTR == %x, prev SCBPTR == %x.",
6173                               next, prev);
6174                 }
6175                 scbp = ahc_lookup_scb(ahc, scb_index);
6176                 if (ahc_match_scb(ahc, scbp, target, channel, lun,
6177                                   tag, ROLE_INITIATOR)) {
6178                         count++;
6179                         if (remove) {
6180                                 next =
6181                                     ahc_rem_scb_from_disc_list(ahc, prev, next);
6182                         } else {
6183                                 prev = next;
6184                                 next = ahc_inb(ahc, SCB_NEXT);
6185                         }
6186                         if (stop_on_first)
6187                                 break;
6188                 } else {
6189                         prev = next;
6190                         next = ahc_inb(ahc, SCB_NEXT);
6191                 }
6192         }
6193         if (save_state)
6194                 ahc_outb(ahc, SCBPTR, active_scb);
6195         return (count);
6196 }
6197
6198 /*
6199  * Remove an SCB from the on chip list of disconnected transactions.
6200  * This is empty/unused if we are not performing SCB paging.
6201  */
6202 static u_int
6203 ahc_rem_scb_from_disc_list(struct ahc_softc *ahc, u_int prev, u_int scbptr)
6204 {
6205         u_int next;
6206
6207         ahc_outb(ahc, SCBPTR, scbptr);
6208         next = ahc_inb(ahc, SCB_NEXT);
6209
6210         ahc_outb(ahc, SCB_CONTROL, 0);
6211
6212         ahc_add_curscb_to_free_list(ahc);
6213
6214         if (prev != SCB_LIST_NULL) {
6215                 ahc_outb(ahc, SCBPTR, prev);
6216                 ahc_outb(ahc, SCB_NEXT, next);
6217         } else
6218                 ahc_outb(ahc, DISCONNECTED_SCBH, next);
6219
6220         return (next);
6221 }
6222
6223 /*
6224  * Add the SCB as selected by SCBPTR onto the on chip list of
6225  * free hardware SCBs.  This list is empty/unused if we are not
6226  * performing SCB paging.
6227  */
6228 static void
6229 ahc_add_curscb_to_free_list(struct ahc_softc *ahc)
6230 {
6231         /*
6232          * Invalidate the tag so that our abort
6233          * routines don't think it's active.
6234          */
6235         ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL);
6236
6237         if ((ahc->flags & AHC_PAGESCBS) != 0) {
6238                 ahc_outb(ahc, SCB_NEXT, ahc_inb(ahc, FREE_SCBH));
6239                 ahc_outb(ahc, FREE_SCBH, ahc_inb(ahc, SCBPTR));
6240         }
6241 }
6242
6243 /*
6244  * Manipulate the waiting for selection list and return the
6245  * scb that follows the one that we remove.
6246  */
6247 static u_int
6248 ahc_rem_wscb(struct ahc_softc *ahc, u_int scbpos, u_int prev)
6249 {
6250         u_int curscb, next;
6251
6252         /*
6253          * Select the SCB we want to abort and
6254          * pull the next pointer out of it.
6255          */
6256         curscb = ahc_inb(ahc, SCBPTR);
6257         ahc_outb(ahc, SCBPTR, scbpos);
6258         next = ahc_inb(ahc, SCB_NEXT);
6259
6260         /* Clear the necessary fields */
6261         ahc_outb(ahc, SCB_CONTROL, 0);
6262
6263         ahc_add_curscb_to_free_list(ahc);
6264
6265         /* update the waiting list */
6266         if (prev == SCB_LIST_NULL) {
6267                 /* First in the list */
6268                 ahc_outb(ahc, WAITING_SCBH, next);
6269
6270                 /*
6271                  * Ensure we aren't attempting to perform
6272                  * selection for this entry.
6273                  */
6274                 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO));
6275         } else {
6276                 /*
6277                  * Select the scb that pointed to us
6278                  * and update its next pointer.
6279                  */
6280                 ahc_outb(ahc, SCBPTR, prev);
6281                 ahc_outb(ahc, SCB_NEXT, next);
6282         }
6283
6284         /*
6285          * Point us back at the original scb position.
6286          */
6287         ahc_outb(ahc, SCBPTR, curscb);
6288         return next;
6289 }
6290
6291 /******************************** Error Handling ******************************/
6292 /*
6293  * Abort all SCBs that match the given description (target/channel/lun/tag),
6294  * setting their status to the passed in status if the status has not already
6295  * been modified from CAM_REQ_INPROG.  This routine assumes that the sequencer
6296  * is paused before it is called.
6297  */
6298 static int
6299 ahc_abort_scbs(struct ahc_softc *ahc, int target, char channel,
6300                int lun, u_int tag, role_t role, uint32_t status)
6301 {
6302         struct  scb *scbp;
6303         struct  scb *scbp_next;
6304         u_int   active_scb;
6305         int     i, j;
6306         int     maxtarget;
6307         int     minlun;
6308         int     maxlun;
6309
6310         int     found;
6311
6312         /*
6313          * Don't attempt to run any queued untagged transactions
6314          * until we are done with the abort process.
6315          */
6316         ahc_freeze_untagged_queues(ahc);
6317
6318         /* restore this when we're done */
6319         active_scb = ahc_inb(ahc, SCBPTR);
6320
6321         found = ahc_search_qinfifo(ahc, target, channel, lun, SCB_LIST_NULL,
6322                                    role, CAM_REQUEUE_REQ, SEARCH_COMPLETE);
6323
6324         /*
6325          * Clean out the busy target table for any untagged commands.
6326          */
6327         i = 0;
6328         maxtarget = 16;
6329         if (target != CAM_TARGET_WILDCARD) {
6330                 i = target;
6331                 if (channel == 'B')
6332                         i += 8;
6333                 maxtarget = i + 1;
6334         }
6335
6336         if (lun == CAM_LUN_WILDCARD) {
6337
6338                 /*
6339                  * Unless we are using an SCB based
6340                  * busy targets table, there is only
6341                  * one table entry for all luns of
6342                  * a target.
6343                  */
6344                 minlun = 0;
6345                 maxlun = 1;
6346                 if ((ahc->flags & AHC_SCB_BTT) != 0)
6347                         maxlun = AHC_NUM_LUNS;
6348         } else {
6349                 minlun = lun;
6350                 maxlun = lun + 1;
6351         }
6352
6353         if (role != ROLE_TARGET) {
6354                 for (;i < maxtarget; i++) {
6355                         for (j = minlun;j < maxlun; j++) {
6356                                 u_int scbid;
6357                                 u_int tcl;
6358
6359                                 tcl = BUILD_TCL(i << 4, j);
6360                                 scbid = ahc_index_busy_tcl(ahc, tcl);
6361                                 scbp = ahc_lookup_scb(ahc, scbid);
6362                                 if (scbp == NULL
6363                                  || ahc_match_scb(ahc, scbp, target, channel,
6364                                                   lun, tag, role) == 0)
6365                                         continue;
6366                                 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, j));
6367                         }
6368                 }
6369
6370                 /*
6371                  * Go through the disconnected list and remove any entries we
6372                  * have queued for completion, 0'ing their control byte too.
6373                  * We save the active SCB and restore it ourselves, so there
6374                  * is no reason for this search to restore it too.
6375                  */
6376                 ahc_search_disc_list(ahc, target, channel, lun, tag,
6377                                      /*stop_on_first*/FALSE, /*remove*/TRUE,
6378                                      /*save_state*/FALSE);
6379         }
6380
6381         /*
6382          * Go through the hardware SCB array looking for commands that
6383          * were active but not on any list.  In some cases, these remnants
6384          * might not still have mappings in the scbindex array (e.g. unexpected
6385          * bus free with the same scb queued for an abort).  Don't hold this
6386          * against them.
6387          */
6388         for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
6389                 u_int scbid;
6390
6391                 ahc_outb(ahc, SCBPTR, i);
6392                 scbid = ahc_inb(ahc, SCB_TAG);
6393                 scbp = ahc_lookup_scb(ahc, scbid);
6394                 if ((scbp == NULL && scbid != SCB_LIST_NULL)
6395                  || (scbp != NULL
6396                   && ahc_match_scb(ahc, scbp, target, channel, lun, tag, role)))
6397                         ahc_add_curscb_to_free_list(ahc);
6398         }
6399
6400         /*
6401          * Go through the pending CCB list and look for
6402          * commands for this target that are still active.
6403          * These are other tagged commands that were
6404          * disconnected when the reset occurred.
6405          */
6406         scbp_next = LIST_FIRST(&ahc->pending_scbs);
6407         while (scbp_next != NULL) {
6408                 scbp = scbp_next;
6409                 scbp_next = LIST_NEXT(scbp, pending_links);
6410                 if (ahc_match_scb(ahc, scbp, target, channel, lun, tag, role)) {
6411                         cam_status ostat;
6412
6413                         ostat = ahc_get_transaction_status(scbp);
6414                         if (ostat == CAM_REQ_INPROG)
6415                                 ahc_set_transaction_status(scbp, status);
6416                         if (ahc_get_transaction_status(scbp) != CAM_REQ_CMP)
6417                                 ahc_freeze_scb(scbp);
6418                         if ((scbp->flags & SCB_ACTIVE) == 0)
6419                                 printk("Inactive SCB on pending list\n");
6420                         ahc_done(ahc, scbp);
6421                         found++;
6422                 }
6423         }
6424         ahc_outb(ahc, SCBPTR, active_scb);
6425         ahc_platform_abort_scbs(ahc, target, channel, lun, tag, role, status);
6426         ahc_release_untagged_queues(ahc);
6427         return found;
6428 }
6429
6430 static void
6431 ahc_reset_current_bus(struct ahc_softc *ahc)
6432 {
6433         uint8_t scsiseq;
6434
6435         ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENSCSIRST);
6436         scsiseq = ahc_inb(ahc, SCSISEQ);
6437         ahc_outb(ahc, SCSISEQ, scsiseq | SCSIRSTO);
6438         ahc_flush_device_writes(ahc);
6439         ahc_delay(AHC_BUSRESET_DELAY);
6440         /* Turn off the bus reset */
6441         ahc_outb(ahc, SCSISEQ, scsiseq & ~SCSIRSTO);
6442
6443         ahc_clear_intstat(ahc);
6444
6445         /* Re-enable reset interrupts */
6446         ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) | ENSCSIRST);
6447 }
6448
6449 int
6450 ahc_reset_channel(struct ahc_softc *ahc, char channel, int initiate_reset)
6451 {
6452         struct  ahc_devinfo devinfo;
6453         u_int   initiator, target, max_scsiid;
6454         u_int   sblkctl;
6455         u_int   scsiseq;
6456         u_int   simode1;
6457         int     found;
6458         int     restart_needed;
6459         char    cur_channel;
6460
6461         ahc->pending_device = NULL;
6462
6463         ahc_compile_devinfo(&devinfo,
6464                             CAM_TARGET_WILDCARD,
6465                             CAM_TARGET_WILDCARD,
6466                             CAM_LUN_WILDCARD,
6467                             channel, ROLE_UNKNOWN);
6468         ahc_pause(ahc);
6469
6470         /* Make sure the sequencer is in a safe location. */
6471         ahc_clear_critical_section(ahc);
6472
6473         /*
6474          * Run our command complete fifos to ensure that we perform
6475          * completion processing on any commands that 'completed'
6476          * before the reset occurred.
6477          */
6478         ahc_run_qoutfifo(ahc);
6479 #ifdef AHC_TARGET_MODE
6480         /*
6481          * XXX - In Twin mode, the tqinfifo may have commands
6482          *       for an unaffected channel in it.  However, if
6483          *       we have run out of ATIO resources to drain that
6484          *       queue, we may not get them all out here.  Further,
6485          *       the blocked transactions for the reset channel
6486          *       should just be killed off, irrespecitve of whether
6487          *       we are blocked on ATIO resources.  Write a routine
6488          *       to compact the tqinfifo appropriately.
6489          */
6490         if ((ahc->flags & AHC_TARGETROLE) != 0) {
6491                 ahc_run_tqinfifo(ahc, /*paused*/TRUE);
6492         }
6493 #endif
6494
6495         /*
6496          * Reset the bus if we are initiating this reset
6497          */
6498         sblkctl = ahc_inb(ahc, SBLKCTL);
6499         cur_channel = 'A';
6500         if ((ahc->features & AHC_TWIN) != 0
6501          && ((sblkctl & SELBUSB) != 0))
6502             cur_channel = 'B';
6503         scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE);
6504         if (cur_channel != channel) {
6505                 /* Case 1: Command for another bus is active
6506                  * Stealthily reset the other bus without
6507                  * upsetting the current bus.
6508                  */
6509                 ahc_outb(ahc, SBLKCTL, sblkctl ^ SELBUSB);
6510                 simode1 = ahc_inb(ahc, SIMODE1) & ~(ENBUSFREE|ENSCSIRST);
6511 #ifdef AHC_TARGET_MODE
6512                 /*
6513                  * Bus resets clear ENSELI, so we cannot
6514                  * defer re-enabling bus reset interrupts
6515                  * if we are in target mode.
6516                  */
6517                 if ((ahc->flags & AHC_TARGETROLE) != 0)
6518                         simode1 |= ENSCSIRST;
6519 #endif
6520                 ahc_outb(ahc, SIMODE1, simode1);
6521                 if (initiate_reset)
6522                         ahc_reset_current_bus(ahc);
6523                 ahc_clear_intstat(ahc);
6524                 ahc_outb(ahc, SCSISEQ, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP));
6525                 ahc_outb(ahc, SBLKCTL, sblkctl);
6526                 restart_needed = FALSE;
6527         } else {
6528                 /* Case 2: A command from this bus is active or we're idle */
6529                 simode1 = ahc_inb(ahc, SIMODE1) & ~(ENBUSFREE|ENSCSIRST);
6530 #ifdef AHC_TARGET_MODE
6531                 /*
6532                  * Bus resets clear ENSELI, so we cannot
6533                  * defer re-enabling bus reset interrupts
6534                  * if we are in target mode.
6535                  */
6536                 if ((ahc->flags & AHC_TARGETROLE) != 0)
6537                         simode1 |= ENSCSIRST;
6538 #endif
6539                 ahc_outb(ahc, SIMODE1, simode1);
6540                 if (initiate_reset)
6541                         ahc_reset_current_bus(ahc);
6542                 ahc_clear_intstat(ahc);
6543                 ahc_outb(ahc, SCSISEQ, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP));
6544                 restart_needed = TRUE;
6545         }
6546
6547         /*
6548          * Clean up all the state information for the
6549          * pending transactions on this bus.
6550          */
6551         found = ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, channel,
6552                                CAM_LUN_WILDCARD, SCB_LIST_NULL,
6553                                ROLE_UNKNOWN, CAM_SCSI_BUS_RESET);
6554
6555         max_scsiid = (ahc->features & AHC_WIDE) ? 15 : 7;
6556
6557 #ifdef AHC_TARGET_MODE
6558         /*
6559          * Send an immediate notify ccb to all target more peripheral
6560          * drivers affected by this action.
6561          */
6562         for (target = 0; target <= max_scsiid; target++) {
6563                 struct ahc_tmode_tstate* tstate;
6564                 u_int lun;
6565
6566                 tstate = ahc->enabled_targets[target];
6567                 if (tstate == NULL)
6568                         continue;
6569                 for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
6570                         struct ahc_tmode_lstate* lstate;
6571
6572                         lstate = tstate->enabled_luns[lun];
6573                         if (lstate == NULL)
6574                                 continue;
6575
6576                         ahc_queue_lstate_event(ahc, lstate, CAM_TARGET_WILDCARD,
6577                                                EVENT_TYPE_BUS_RESET, /*arg*/0);
6578                         ahc_send_lstate_events(ahc, lstate);
6579                 }
6580         }
6581 #endif
6582         /* Notify the XPT that a bus reset occurred */
6583         ahc_send_async(ahc, devinfo.channel, CAM_TARGET_WILDCARD,
6584                        CAM_LUN_WILDCARD, AC_BUS_RESET);
6585
6586         /*
6587          * Revert to async/narrow transfers until we renegotiate.
6588          */
6589         for (target = 0; target <= max_scsiid; target++) {
6590
6591                 if (ahc->enabled_targets[target] == NULL)
6592                         continue;
6593                 for (initiator = 0; initiator <= max_scsiid; initiator++) {
6594                         struct ahc_devinfo devinfo;
6595
6596                         ahc_compile_devinfo(&devinfo, target, initiator,
6597                                             CAM_LUN_WILDCARD,
6598                                             channel, ROLE_UNKNOWN);
6599                         ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
6600                                       AHC_TRANS_CUR, /*paused*/TRUE);
6601                         ahc_set_syncrate(ahc, &devinfo, /*syncrate*/NULL,
6602                                          /*period*/0, /*offset*/0,
6603                                          /*ppr_options*/0, AHC_TRANS_CUR,
6604                                          /*paused*/TRUE);
6605                 }
6606         }
6607
6608         if (restart_needed)
6609                 ahc_restart(ahc);
6610         else
6611                 ahc_unpause(ahc);
6612         return found;
6613 }
6614
6615
6616 /***************************** Residual Processing ****************************/
6617 /*
6618  * Calculate the residual for a just completed SCB.
6619  */
6620 static void
6621 ahc_calc_residual(struct ahc_softc *ahc, struct scb *scb)
6622 {
6623         struct hardware_scb *hscb;
6624         struct status_pkt *spkt;
6625         uint32_t sgptr;
6626         uint32_t resid_sgptr;
6627         uint32_t resid;
6628
6629         /*
6630          * 5 cases.
6631          * 1) No residual.
6632          *    SG_RESID_VALID clear in sgptr.
6633          * 2) Transferless command
6634          * 3) Never performed any transfers.
6635          *    sgptr has SG_FULL_RESID set.
6636          * 4) No residual but target did not
6637          *    save data pointers after the
6638          *    last transfer, so sgptr was
6639          *    never updated.
6640          * 5) We have a partial residual.
6641          *    Use residual_sgptr to determine
6642          *    where we are.
6643          */
6644
6645         hscb = scb->hscb;
6646         sgptr = ahc_le32toh(hscb->sgptr);
6647         if ((sgptr & SG_RESID_VALID) == 0)
6648                 /* Case 1 */
6649                 return;
6650         sgptr &= ~SG_RESID_VALID;
6651
6652         if ((sgptr & SG_LIST_NULL) != 0)
6653                 /* Case 2 */
6654                 return;
6655
6656         spkt = &hscb->shared_data.status;
6657         resid_sgptr = ahc_le32toh(spkt->residual_sg_ptr);
6658         if ((sgptr & SG_FULL_RESID) != 0) {
6659                 /* Case 3 */
6660                 resid = ahc_get_transfer_length(scb);
6661         } else if ((resid_sgptr & SG_LIST_NULL) != 0) {
6662                 /* Case 4 */
6663                 return;
6664         } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) {
6665                 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr);
6666         } else {
6667                 struct ahc_dma_seg *sg;
6668
6669                 /*
6670                  * Remainder of the SG where the transfer
6671                  * stopped.
6672                  */
6673                 resid = ahc_le32toh(spkt->residual_datacnt) & AHC_SG_LEN_MASK;
6674                 sg = ahc_sg_bus_to_virt(scb, resid_sgptr & SG_PTR_MASK);
6675
6676                 /* The residual sg_ptr always points to the next sg */
6677                 sg--;
6678
6679                 /*
6680                  * Add up the contents of all residual
6681                  * SG segments that are after the SG where
6682                  * the transfer stopped.
6683                  */
6684                 while ((ahc_le32toh(sg->len) & AHC_DMA_LAST_SEG) == 0) {
6685                         sg++;
6686                         resid += ahc_le32toh(sg->len) & AHC_SG_LEN_MASK;
6687                 }
6688         }
6689         if ((scb->flags & SCB_SENSE) == 0)
6690                 ahc_set_residual(scb, resid);
6691         else
6692                 ahc_set_sense_residual(scb, resid);
6693
6694 #ifdef AHC_DEBUG
6695         if ((ahc_debug & AHC_SHOW_MISC) != 0) {
6696                 ahc_print_path(ahc, scb);
6697                 printk("Handled %sResidual of %d bytes\n",
6698                        (scb->flags & SCB_SENSE) ? "Sense " : "", resid);
6699         }
6700 #endif
6701 }
6702
6703 /******************************* Target Mode **********************************/
6704 #ifdef AHC_TARGET_MODE
6705 /*
6706  * Add a target mode event to this lun's queue
6707  */
6708 static void
6709 ahc_queue_lstate_event(struct ahc_softc *ahc, struct ahc_tmode_lstate *lstate,
6710                        u_int initiator_id, u_int event_type, u_int event_arg)
6711 {
6712         struct ahc_tmode_event *event;
6713         int pending;
6714
6715         xpt_freeze_devq(lstate->path, /*count*/1);
6716         if (lstate->event_w_idx >= lstate->event_r_idx)
6717                 pending = lstate->event_w_idx - lstate->event_r_idx;
6718         else
6719                 pending = AHC_TMODE_EVENT_BUFFER_SIZE + 1
6720                         - (lstate->event_r_idx - lstate->event_w_idx);
6721
6722         if (event_type == EVENT_TYPE_BUS_RESET
6723          || event_type == MSG_BUS_DEV_RESET) {
6724                 /*
6725                  * Any earlier events are irrelevant, so reset our buffer.
6726                  * This has the effect of allowing us to deal with reset
6727                  * floods (an external device holding down the reset line)
6728                  * without losing the event that is really interesting.
6729                  */
6730                 lstate->event_r_idx = 0;
6731                 lstate->event_w_idx = 0;
6732                 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE);
6733         }
6734
6735         if (pending == AHC_TMODE_EVENT_BUFFER_SIZE) {
6736                 xpt_print_path(lstate->path);
6737                 printk("immediate event %x:%x lost\n",
6738                        lstate->event_buffer[lstate->event_r_idx].event_type,
6739                        lstate->event_buffer[lstate->event_r_idx].event_arg);
6740                 lstate->event_r_idx++;
6741                 if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
6742                         lstate->event_r_idx = 0;
6743                 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE);
6744         }
6745
6746         event = &lstate->event_buffer[lstate->event_w_idx];
6747         event->initiator_id = initiator_id;
6748         event->event_type = event_type;
6749         event->event_arg = event_arg;
6750         lstate->event_w_idx++;
6751         if (lstate->event_w_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
6752                 lstate->event_w_idx = 0;
6753 }
6754
6755 /*
6756  * Send any target mode events queued up waiting
6757  * for immediate notify resources.
6758  */
6759 void
6760 ahc_send_lstate_events(struct ahc_softc *ahc, struct ahc_tmode_lstate *lstate)
6761 {
6762         struct ccb_hdr *ccbh;
6763         struct ccb_immed_notify *inot;
6764
6765         while (lstate->event_r_idx != lstate->event_w_idx
6766             && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) {
6767                 struct ahc_tmode_event *event;
6768
6769                 event = &lstate->event_buffer[lstate->event_r_idx];
6770                 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle);
6771                 inot = (struct ccb_immed_notify *)ccbh;
6772                 switch (event->event_type) {
6773                 case EVENT_TYPE_BUS_RESET:
6774                         ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN;
6775                         break;
6776                 default:
6777                         ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN;
6778                         inot->message_args[0] = event->event_type;
6779                         inot->message_args[1] = event->event_arg;
6780                         break;
6781                 }
6782                 inot->initiator_id = event->initiator_id;
6783                 inot->sense_len = 0;
6784                 xpt_done((union ccb *)inot);
6785                 lstate->event_r_idx++;
6786                 if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
6787                         lstate->event_r_idx = 0;
6788         }
6789 }
6790 #endif
6791
6792 /******************** Sequencer Program Patching/Download *********************/
6793
6794 #ifdef AHC_DUMP_SEQ
6795 void
6796 ahc_dumpseq(struct ahc_softc* ahc)
6797 {
6798         int i;
6799
6800         ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
6801         ahc_outb(ahc, SEQADDR0, 0);
6802         ahc_outb(ahc, SEQADDR1, 0);
6803         for (i = 0; i < ahc->instruction_ram_size; i++) {
6804                 uint8_t ins_bytes[4];
6805
6806                 ahc_insb(ahc, SEQRAM, ins_bytes, 4);
6807                 printk("0x%08x\n", ins_bytes[0] << 24
6808                                  | ins_bytes[1] << 16
6809                                  | ins_bytes[2] << 8
6810                                  | ins_bytes[3]);
6811         }
6812 }
6813 #endif
6814
6815 static int
6816 ahc_loadseq(struct ahc_softc *ahc)
6817 {
6818         struct  cs cs_table[NUM_CRITICAL_SECTIONS];
6819         u_int   begin_set[NUM_CRITICAL_SECTIONS];
6820         u_int   end_set[NUM_CRITICAL_SECTIONS];
6821         const struct patch *cur_patch;
6822         u_int   cs_count;
6823         u_int   cur_cs;
6824         u_int   i;
6825         u_int   skip_addr;
6826         u_int   sg_prefetch_cnt;
6827         int     downloaded;
6828         uint8_t download_consts[7];
6829
6830         /*
6831          * Start out with 0 critical sections
6832          * that apply to this firmware load.
6833          */
6834         cs_count = 0;
6835         cur_cs = 0;
6836         memset(begin_set, 0, sizeof(begin_set));
6837         memset(end_set, 0, sizeof(end_set));
6838
6839         /* Setup downloadable constant table */
6840         download_consts[QOUTFIFO_OFFSET] = 0;
6841         if (ahc->targetcmds != NULL)
6842                 download_consts[QOUTFIFO_OFFSET] += 32;
6843         download_consts[QINFIFO_OFFSET] = download_consts[QOUTFIFO_OFFSET] + 1;
6844         download_consts[CACHESIZE_MASK] = ahc->pci_cachesize - 1;
6845         download_consts[INVERTED_CACHESIZE_MASK] = ~(ahc->pci_cachesize - 1);
6846         sg_prefetch_cnt = ahc->pci_cachesize;
6847         if (sg_prefetch_cnt < (2 * sizeof(struct ahc_dma_seg)))
6848                 sg_prefetch_cnt = 2 * sizeof(struct ahc_dma_seg);
6849         download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt;
6850         download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_cnt - 1);
6851         download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_cnt - 1);
6852
6853         cur_patch = patches;
6854         downloaded = 0;
6855         skip_addr = 0;
6856         ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
6857         ahc_outb(ahc, SEQADDR0, 0);
6858         ahc_outb(ahc, SEQADDR1, 0);
6859
6860         for (i = 0; i < sizeof(seqprog)/4; i++) {
6861                 if (ahc_check_patch(ahc, &cur_patch, i, &skip_addr) == 0) {
6862                         /*
6863                          * Don't download this instruction as it
6864                          * is in a patch that was removed.
6865                          */
6866                         continue;
6867                 }
6868
6869                 if (downloaded == ahc->instruction_ram_size) {
6870                         /*
6871                          * We're about to exceed the instruction
6872                          * storage capacity for this chip.  Fail
6873                          * the load.
6874                          */
6875                         printk("\n%s: Program too large for instruction memory "
6876                                "size of %d!\n", ahc_name(ahc),
6877                                ahc->instruction_ram_size);
6878                         return (ENOMEM);
6879                 }
6880
6881                 /*
6882                  * Move through the CS table until we find a CS
6883                  * that might apply to this instruction.
6884                  */
6885                 for (; cur_cs < NUM_CRITICAL_SECTIONS; cur_cs++) {
6886                         if (critical_sections[cur_cs].end <= i) {
6887                                 if (begin_set[cs_count] == TRUE
6888                                  && end_set[cs_count] == FALSE) {
6889                                         cs_table[cs_count].end = downloaded;
6890                                         end_set[cs_count] = TRUE;
6891                                         cs_count++;
6892                                 }
6893                                 continue;
6894                         }
6895                         if (critical_sections[cur_cs].begin <= i
6896                          && begin_set[cs_count] == FALSE) {
6897                                 cs_table[cs_count].begin = downloaded;
6898                                 begin_set[cs_count] = TRUE;
6899                         }
6900                         break;
6901                 }
6902                 ahc_download_instr(ahc, i, download_consts);
6903                 downloaded++;
6904         }
6905
6906         ahc->num_critical_sections = cs_count;
6907         if (cs_count != 0) {
6908
6909                 cs_count *= sizeof(struct cs);
6910                 ahc->critical_sections = kmalloc(cs_count, GFP_ATOMIC);
6911                 if (ahc->critical_sections == NULL)
6912                         panic("ahc_loadseq: Could not malloc");
6913                 memcpy(ahc->critical_sections, cs_table, cs_count);
6914         }
6915         ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE);
6916
6917         if (bootverbose) {
6918                 printk(" %d instructions downloaded\n", downloaded);
6919                 printk("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n",
6920                        ahc_name(ahc), ahc->features, ahc->bugs, ahc->flags);
6921         }
6922         return (0);
6923 }
6924
6925 static int
6926 ahc_check_patch(struct ahc_softc *ahc, const struct patch **start_patch,
6927                 u_int start_instr, u_int *skip_addr)
6928 {
6929         const struct patch *cur_patch;
6930         const struct patch *last_patch;
6931         u_int   num_patches;
6932
6933         num_patches = ARRAY_SIZE(patches);
6934         last_patch = &patches[num_patches];
6935         cur_patch = *start_patch;
6936
6937         while (cur_patch < last_patch && start_instr == cur_patch->begin) {
6938
6939                 if (cur_patch->patch_func(ahc) == 0) {
6940
6941                         /* Start rejecting code */
6942                         *skip_addr = start_instr + cur_patch->skip_instr;
6943                         cur_patch += cur_patch->skip_patch;
6944                 } else {
6945                         /* Accepted this patch.  Advance to the next
6946                          * one and wait for our intruction pointer to
6947                          * hit this point.
6948                          */
6949                         cur_patch++;
6950                 }
6951         }
6952
6953         *start_patch = cur_patch;
6954         if (start_instr < *skip_addr)
6955                 /* Still skipping */
6956                 return (0);
6957
6958         return (1);
6959 }
6960
6961 static void
6962 ahc_download_instr(struct ahc_softc *ahc, u_int instrptr, uint8_t *dconsts)
6963 {
6964         union   ins_formats instr;
6965         struct  ins_format1 *fmt1_ins;
6966         struct  ins_format3 *fmt3_ins;
6967         u_int   opcode;
6968
6969         /*
6970          * The firmware is always compiled into a little endian format.
6971          */
6972         instr.integer = ahc_le32toh(*(uint32_t*)&seqprog[instrptr * 4]);
6973
6974         fmt1_ins = &instr.format1;
6975         fmt3_ins = NULL;
6976
6977         /* Pull the opcode */
6978         opcode = instr.format1.opcode;
6979         switch (opcode) {
6980         case AIC_OP_JMP:
6981         case AIC_OP_JC:
6982         case AIC_OP_JNC:
6983         case AIC_OP_CALL:
6984         case AIC_OP_JNE:
6985         case AIC_OP_JNZ:
6986         case AIC_OP_JE:
6987         case AIC_OP_JZ:
6988         {
6989                 const struct patch *cur_patch;
6990                 int address_offset;
6991                 u_int address;
6992                 u_int skip_addr;
6993                 u_int i;
6994
6995                 fmt3_ins = &instr.format3;
6996                 address_offset = 0;
6997                 address = fmt3_ins->address;
6998                 cur_patch = patches;
6999                 skip_addr = 0;
7000
7001                 for (i = 0; i < address;) {
7002
7003                         ahc_check_patch(ahc, &cur_patch, i, &skip_addr);
7004
7005                         if (skip_addr > i) {
7006                                 int end_addr;
7007
7008                                 end_addr = min(address, skip_addr);
7009                                 address_offset += end_addr - i;
7010                                 i = skip_addr;
7011                         } else {
7012                                 i++;
7013                         }
7014                 }
7015                 address -= address_offset;
7016                 fmt3_ins->address = address;
7017         }
7018                 /* fall through */
7019         case AIC_OP_OR:
7020         case AIC_OP_AND:
7021         case AIC_OP_XOR:
7022         case AIC_OP_ADD:
7023         case AIC_OP_ADC:
7024         case AIC_OP_BMOV:
7025                 if (fmt1_ins->parity != 0) {
7026                         fmt1_ins->immediate = dconsts[fmt1_ins->immediate];
7027                 }
7028                 fmt1_ins->parity = 0;
7029                 if ((ahc->features & AHC_CMD_CHAN) == 0
7030                  && opcode == AIC_OP_BMOV) {
7031                         /*
7032                          * Block move was added at the same time
7033                          * as the command channel.  Verify that
7034                          * this is only a move of a single element
7035                          * and convert the BMOV to a MOV
7036                          * (AND with an immediate of FF).
7037                          */
7038                         if (fmt1_ins->immediate != 1)
7039                                 panic("%s: BMOV not supported\n",
7040                                       ahc_name(ahc));
7041                         fmt1_ins->opcode = AIC_OP_AND;
7042                         fmt1_ins->immediate = 0xff;
7043                 }
7044                 /* fall through */
7045         case AIC_OP_ROL:
7046                 if ((ahc->features & AHC_ULTRA2) != 0) {
7047                         int i, count;
7048
7049                         /* Calculate odd parity for the instruction */
7050                         for (i = 0, count = 0; i < 31; i++) {
7051                                 uint32_t mask;
7052
7053                                 mask = 0x01 << i;
7054                                 if ((instr.integer & mask) != 0)
7055                                         count++;
7056                         }
7057                         if ((count & 0x01) == 0)
7058                                 instr.format1.parity = 1;
7059                 } else {
7060                         /* Compress the instruction for older sequencers */
7061                         if (fmt3_ins != NULL) {
7062                                 instr.integer =
7063                                         fmt3_ins->immediate
7064                                       | (fmt3_ins->source << 8)
7065                                       | (fmt3_ins->address << 16)
7066                                       | (fmt3_ins->opcode << 25);
7067                         } else {
7068                                 instr.integer =
7069                                         fmt1_ins->immediate
7070                                       | (fmt1_ins->source << 8)
7071                                       | (fmt1_ins->destination << 16)
7072                                       | (fmt1_ins->ret << 24)
7073                                       | (fmt1_ins->opcode << 25);
7074                         }
7075                 }
7076                 /* The sequencer is a little endian cpu */
7077                 instr.integer = ahc_htole32(instr.integer);
7078                 ahc_outsb(ahc, SEQRAM, instr.bytes, 4);
7079                 break;
7080         default:
7081                 panic("Unknown opcode encountered in seq program");
7082                 break;
7083         }
7084 }
7085
7086 int
7087 ahc_print_register(const ahc_reg_parse_entry_t *table, u_int num_entries,
7088                    const char *name, u_int address, u_int value,
7089                    u_int *cur_column, u_int wrap_point)
7090 {
7091         int     printed;
7092         u_int   printed_mask;
7093
7094         if (cur_column != NULL && *cur_column >= wrap_point) {
7095                 printk("\n");
7096                 *cur_column = 0;
7097         }
7098         printed  = printk("%s[0x%x]", name, value);
7099         if (table == NULL) {
7100                 printed += printk(" ");
7101                 *cur_column += printed;
7102                 return (printed);
7103         }
7104         printed_mask = 0;
7105         while (printed_mask != 0xFF) {
7106                 int entry;
7107
7108                 for (entry = 0; entry < num_entries; entry++) {
7109                         if (((value & table[entry].mask)
7110                           != table[entry].value)
7111                          || ((printed_mask & table[entry].mask)
7112                           == table[entry].mask))
7113                                 continue;
7114
7115                         printed += printk("%s%s",
7116                                           printed_mask == 0 ? ":(" : "|",
7117                                           table[entry].name);
7118                         printed_mask |= table[entry].mask;
7119
7120                         break;
7121                 }
7122                 if (entry >= num_entries)
7123                         break;
7124         }
7125         if (printed_mask != 0)
7126                 printed += printk(") ");
7127         else
7128                 printed += printk(" ");
7129         if (cur_column != NULL)
7130                 *cur_column += printed;
7131         return (printed);
7132 }
7133
7134 void
7135 ahc_dump_card_state(struct ahc_softc *ahc)
7136 {
7137         struct  scb *scb;
7138         struct  scb_tailq *untagged_q;
7139         u_int   cur_col;
7140         int     paused;
7141         int     target;
7142         int     maxtarget;
7143         int     i;
7144         uint8_t last_phase;
7145         uint8_t qinpos;
7146         uint8_t qintail;
7147         uint8_t qoutpos;
7148         uint8_t scb_index;
7149         uint8_t saved_scbptr;
7150
7151         if (ahc_is_paused(ahc)) {
7152                 paused = 1;
7153         } else {
7154                 paused = 0;
7155                 ahc_pause(ahc);
7156         }
7157
7158         saved_scbptr = ahc_inb(ahc, SCBPTR);
7159         last_phase = ahc_inb(ahc, LASTPHASE);
7160         printk(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n"
7161                "%s: Dumping Card State %s, at SEQADDR 0x%x\n",
7162                ahc_name(ahc), ahc_lookup_phase_entry(last_phase)->phasemsg,
7163                ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8));
7164         if (paused)
7165                 printk("Card was paused\n");
7166         printk("ACCUM = 0x%x, SINDEX = 0x%x, DINDEX = 0x%x, ARG_2 = 0x%x\n",
7167                ahc_inb(ahc, ACCUM), ahc_inb(ahc, SINDEX), ahc_inb(ahc, DINDEX),
7168                ahc_inb(ahc, ARG_2));
7169         printk("HCNT = 0x%x SCBPTR = 0x%x\n", ahc_inb(ahc, HCNT),
7170                ahc_inb(ahc, SCBPTR));
7171         cur_col = 0;
7172         if ((ahc->features & AHC_DT) != 0)
7173                 ahc_scsiphase_print(ahc_inb(ahc, SCSIPHASE), &cur_col, 50);
7174         ahc_scsisigi_print(ahc_inb(ahc, SCSISIGI), &cur_col, 50);
7175         ahc_error_print(ahc_inb(ahc, ERROR), &cur_col, 50);
7176         ahc_scsibusl_print(ahc_inb(ahc, SCSIBUSL), &cur_col, 50);
7177         ahc_lastphase_print(ahc_inb(ahc, LASTPHASE), &cur_col, 50);
7178         ahc_scsiseq_print(ahc_inb(ahc, SCSISEQ), &cur_col, 50);
7179         ahc_sblkctl_print(ahc_inb(ahc, SBLKCTL), &cur_col, 50);
7180         ahc_scsirate_print(ahc_inb(ahc, SCSIRATE), &cur_col, 50);
7181         ahc_seqctl_print(ahc_inb(ahc, SEQCTL), &cur_col, 50);
7182         ahc_seq_flags_print(ahc_inb(ahc, SEQ_FLAGS), &cur_col, 50);
7183         ahc_sstat0_print(ahc_inb(ahc, SSTAT0), &cur_col, 50);
7184         ahc_sstat1_print(ahc_inb(ahc, SSTAT1), &cur_col, 50);
7185         ahc_sstat2_print(ahc_inb(ahc, SSTAT2), &cur_col, 50);
7186         ahc_sstat3_print(ahc_inb(ahc, SSTAT3), &cur_col, 50);
7187         ahc_simode0_print(ahc_inb(ahc, SIMODE0), &cur_col, 50);
7188         ahc_simode1_print(ahc_inb(ahc, SIMODE1), &cur_col, 50);
7189         ahc_sxfrctl0_print(ahc_inb(ahc, SXFRCTL0), &cur_col, 50);
7190         ahc_dfcntrl_print(ahc_inb(ahc, DFCNTRL), &cur_col, 50);
7191         ahc_dfstatus_print(ahc_inb(ahc, DFSTATUS), &cur_col, 50);
7192         if (cur_col != 0)
7193                 printk("\n");
7194         printk("STACK:");
7195         for (i = 0; i < STACK_SIZE; i++)
7196                 printk(" 0x%x", ahc_inb(ahc, STACK)|(ahc_inb(ahc, STACK) << 8));
7197         printk("\nSCB count = %d\n", ahc->scb_data->numscbs);
7198         printk("Kernel NEXTQSCB = %d\n", ahc->next_queued_scb->hscb->tag);
7199         printk("Card NEXTQSCB = %d\n", ahc_inb(ahc, NEXT_QUEUED_SCB));
7200         /* QINFIFO */
7201         printk("QINFIFO entries: ");
7202         if ((ahc->features & AHC_QUEUE_REGS) != 0) {
7203                 qinpos = ahc_inb(ahc, SNSCB_QOFF);
7204                 ahc_outb(ahc, SNSCB_QOFF, qinpos);
7205         } else
7206                 qinpos = ahc_inb(ahc, QINPOS);
7207         qintail = ahc->qinfifonext;
7208         while (qinpos != qintail) {
7209                 printk("%d ", ahc->qinfifo[qinpos]);
7210                 qinpos++;
7211         }
7212         printk("\n");
7213
7214         printk("Waiting Queue entries: ");
7215         scb_index = ahc_inb(ahc, WAITING_SCBH);
7216         i = 0;
7217         while (scb_index != SCB_LIST_NULL && i++ < 256) {
7218                 ahc_outb(ahc, SCBPTR, scb_index);
7219                 printk("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG));
7220                 scb_index = ahc_inb(ahc, SCB_NEXT);
7221         }
7222         printk("\n");
7223
7224         printk("Disconnected Queue entries: ");
7225         scb_index = ahc_inb(ahc, DISCONNECTED_SCBH);
7226         i = 0;
7227         while (scb_index != SCB_LIST_NULL && i++ < 256) {
7228                 ahc_outb(ahc, SCBPTR, scb_index);
7229                 printk("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG));
7230                 scb_index = ahc_inb(ahc, SCB_NEXT);
7231         }
7232         printk("\n");
7233
7234         ahc_sync_qoutfifo(ahc, BUS_DMASYNC_POSTREAD);
7235         printk("QOUTFIFO entries: ");
7236         qoutpos = ahc->qoutfifonext;
7237         i = 0;
7238         while (ahc->qoutfifo[qoutpos] != SCB_LIST_NULL && i++ < 256) {
7239                 printk("%d ", ahc->qoutfifo[qoutpos]);
7240                 qoutpos++;
7241         }
7242         printk("\n");
7243
7244         printk("Sequencer Free SCB List: ");
7245         scb_index = ahc_inb(ahc, FREE_SCBH);
7246         i = 0;
7247         while (scb_index != SCB_LIST_NULL && i++ < 256) {
7248                 ahc_outb(ahc, SCBPTR, scb_index);
7249                 printk("%d ", scb_index);
7250                 scb_index = ahc_inb(ahc, SCB_NEXT);
7251         }
7252         printk("\n");
7253
7254         printk("Sequencer SCB Info: ");
7255         for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
7256                 ahc_outb(ahc, SCBPTR, i);
7257                 cur_col  = printk("\n%3d ", i);
7258
7259                 ahc_scb_control_print(ahc_inb(ahc, SCB_CONTROL), &cur_col, 60);
7260                 ahc_scb_scsiid_print(ahc_inb(ahc, SCB_SCSIID), &cur_col, 60);
7261                 ahc_scb_lun_print(ahc_inb(ahc, SCB_LUN), &cur_col, 60);
7262                 ahc_scb_tag_print(ahc_inb(ahc, SCB_TAG), &cur_col, 60);
7263         }
7264         printk("\n");
7265
7266         printk("Pending list: ");
7267         i = 0;
7268         LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) {
7269                 if (i++ > 256)
7270                         break;
7271                 cur_col  = printk("\n%3d ", scb->hscb->tag);
7272                 ahc_scb_control_print(scb->hscb->control, &cur_col, 60);
7273                 ahc_scb_scsiid_print(scb->hscb->scsiid, &cur_col, 60);
7274                 ahc_scb_lun_print(scb->hscb->lun, &cur_col, 60);
7275                 if ((ahc->flags & AHC_PAGESCBS) == 0) {
7276                         ahc_outb(ahc, SCBPTR, scb->hscb->tag);
7277                         printk("(");
7278                         ahc_scb_control_print(ahc_inb(ahc, SCB_CONTROL),
7279                                               &cur_col, 60);
7280                         ahc_scb_tag_print(ahc_inb(ahc, SCB_TAG), &cur_col, 60);
7281                         printk(")");
7282                 }
7283         }
7284         printk("\n");
7285
7286         printk("Kernel Free SCB list: ");
7287         i = 0;
7288         SLIST_FOREACH(scb, &ahc->scb_data->free_scbs, links.sle) {
7289                 if (i++ > 256)
7290                         break;
7291                 printk("%d ", scb->hscb->tag);
7292         }
7293         printk("\n");
7294
7295         maxtarget = (ahc->features & (AHC_WIDE|AHC_TWIN)) ? 15 : 7;
7296         for (target = 0; target <= maxtarget; target++) {
7297                 untagged_q = &ahc->untagged_queues[target];
7298                 if (TAILQ_FIRST(untagged_q) == NULL)
7299                         continue;
7300                 printk("Untagged Q(%d): ", target);
7301                 i = 0;
7302                 TAILQ_FOREACH(scb, untagged_q, links.tqe) {
7303                         if (i++ > 256)
7304                                 break;
7305                         printk("%d ", scb->hscb->tag);
7306                 }
7307                 printk("\n");
7308         }
7309
7310         printk("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n");
7311         ahc_outb(ahc, SCBPTR, saved_scbptr);
7312         if (paused == 0)
7313                 ahc_unpause(ahc);
7314 }
7315
7316 /************************* Target Mode ****************************************/
7317 #ifdef AHC_TARGET_MODE
7318 cam_status
7319 ahc_find_tmode_devs(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb,
7320                     struct ahc_tmode_tstate **tstate,
7321                     struct ahc_tmode_lstate **lstate,
7322                     int notfound_failure)
7323 {
7324
7325         if ((ahc->features & AHC_TARGETMODE) == 0)
7326                 return (CAM_REQ_INVALID);
7327
7328         /*
7329          * Handle the 'black hole' device that sucks up
7330          * requests to unattached luns on enabled targets.
7331          */
7332         if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD
7333          && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) {
7334                 *tstate = NULL;
7335                 *lstate = ahc->black_hole;
7336         } else {
7337                 u_int max_id;
7338
7339                 max_id = (ahc->features & AHC_WIDE) ? 16 : 8;
7340                 if (ccb->ccb_h.target_id >= max_id)
7341                         return (CAM_TID_INVALID);
7342
7343                 if (ccb->ccb_h.target_lun >= AHC_NUM_LUNS)
7344                         return (CAM_LUN_INVALID);
7345
7346                 *tstate = ahc->enabled_targets[ccb->ccb_h.target_id];
7347                 *lstate = NULL;
7348                 if (*tstate != NULL)
7349                         *lstate =
7350                             (*tstate)->enabled_luns[ccb->ccb_h.target_lun];
7351         }
7352
7353         if (notfound_failure != 0 && *lstate == NULL)
7354                 return (CAM_PATH_INVALID);
7355
7356         return (CAM_REQ_CMP);
7357 }
7358
7359 void
7360 ahc_handle_en_lun(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb)
7361 {
7362         struct     ahc_tmode_tstate *tstate;
7363         struct     ahc_tmode_lstate *lstate;
7364         struct     ccb_en_lun *cel;
7365         cam_status status;
7366         u_long     s;
7367         u_int      target;
7368         u_int      lun;
7369         u_int      target_mask;
7370         u_int      our_id;
7371         int        error;
7372         char       channel;
7373
7374         status = ahc_find_tmode_devs(ahc, sim, ccb, &tstate, &lstate,
7375                                      /*notfound_failure*/FALSE);
7376
7377         if (status != CAM_REQ_CMP) {
7378                 ccb->ccb_h.status = status;
7379                 return;
7380         }
7381
7382         if (cam_sim_bus(sim) == 0)
7383                 our_id = ahc->our_id;
7384         else
7385                 our_id = ahc->our_id_b;
7386
7387         if (ccb->ccb_h.target_id != our_id) {
7388                 /*
7389                  * our_id represents our initiator ID, or
7390                  * the ID of the first target to have an
7391                  * enabled lun in target mode.  There are
7392                  * two cases that may preclude enabling a
7393                  * target id other than our_id.
7394                  *
7395                  *   o our_id is for an active initiator role.
7396                  *     Since the hardware does not support
7397                  *     reselections to the initiator role at
7398                  *     anything other than our_id, and our_id
7399                  *     is used by the hardware to indicate the
7400                  *     ID to use for both select-out and
7401                  *     reselect-out operations, the only target
7402                  *     ID we can support in this mode is our_id.
7403                  *
7404                  *   o The MULTARGID feature is not available and
7405                  *     a previous target mode ID has been enabled.
7406                  */
7407                 if ((ahc->features & AHC_MULTIROLE) != 0) {
7408
7409                         if ((ahc->features & AHC_MULTI_TID) != 0
7410                          && (ahc->flags & AHC_INITIATORROLE) != 0) {
7411                                 /*
7412                                  * Only allow additional targets if
7413                                  * the initiator role is disabled.
7414                                  * The hardware cannot handle a re-select-in
7415                                  * on the initiator id during a re-select-out
7416                                  * on a different target id.
7417                                  */
7418                                 status = CAM_TID_INVALID;
7419                         } else if ((ahc->flags & AHC_INITIATORROLE) != 0
7420                                 || ahc->enabled_luns > 0) {
7421                                 /*
7422                                  * Only allow our target id to change
7423                                  * if the initiator role is not configured
7424                                  * and there are no enabled luns which
7425                                  * are attached to the currently registered
7426                                  * scsi id.
7427                                  */
7428                                 status = CAM_TID_INVALID;
7429                         }
7430                 } else if ((ahc->features & AHC_MULTI_TID) == 0
7431                         && ahc->enabled_luns > 0) {
7432
7433                         status = CAM_TID_INVALID;
7434                 }
7435         }
7436
7437         if (status != CAM_REQ_CMP) {
7438                 ccb->ccb_h.status = status;
7439                 return;
7440         }
7441
7442         /*
7443          * We now have an id that is valid.
7444          * If we aren't in target mode, switch modes.
7445          */
7446         if ((ahc->flags & AHC_TARGETROLE) == 0
7447          && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
7448                 u_long   s;
7449                 ahc_flag saved_flags;
7450
7451                 printk("Configuring Target Mode\n");
7452                 ahc_lock(ahc, &s);
7453                 if (LIST_FIRST(&ahc->pending_scbs) != NULL) {
7454                         ccb->ccb_h.status = CAM_BUSY;
7455                         ahc_unlock(ahc, &s);
7456                         return;
7457                 }
7458                 saved_flags = ahc->flags;
7459                 ahc->flags |= AHC_TARGETROLE;
7460                 if ((ahc->features & AHC_MULTIROLE) == 0)
7461                         ahc->flags &= ~AHC_INITIATORROLE;
7462                 ahc_pause(ahc);
7463                 error = ahc_loadseq(ahc);
7464                 if (error != 0) {
7465                         /*
7466                          * Restore original configuration and notify
7467                          * the caller that we cannot support target mode.
7468                          * Since the adapter started out in this
7469                          * configuration, the firmware load will succeed,
7470                          * so there is no point in checking ahc_loadseq's
7471                          * return value.
7472                          */
7473                         ahc->flags = saved_flags;
7474                         (void)ahc_loadseq(ahc);
7475                         ahc_restart(ahc);
7476                         ahc_unlock(ahc, &s);
7477                         ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
7478                         return;
7479                 }
7480                 ahc_restart(ahc);
7481                 ahc_unlock(ahc, &s);
7482         }
7483         cel = &ccb->cel;
7484         target = ccb->ccb_h.target_id;
7485         lun = ccb->ccb_h.target_lun;
7486         channel = SIM_CHANNEL(ahc, sim);
7487         target_mask = 0x01 << target;
7488         if (channel == 'B')
7489                 target_mask <<= 8;
7490
7491         if (cel->enable != 0) {
7492                 u_int scsiseq;
7493
7494                 /* Are we already enabled?? */
7495                 if (lstate != NULL) {
7496                         xpt_print_path(ccb->ccb_h.path);
7497                         printk("Lun already enabled\n");
7498                         ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
7499                         return;
7500                 }
7501
7502                 if (cel->grp6_len != 0
7503                  || cel->grp7_len != 0) {
7504                         /*
7505                          * Don't (yet?) support vendor
7506                          * specific commands.
7507                          */
7508                         ccb->ccb_h.status = CAM_REQ_INVALID;
7509                         printk("Non-zero Group Codes\n");
7510                         return;
7511                 }
7512
7513                 /*
7514                  * Seems to be okay.
7515                  * Setup our data structures.
7516                  */
7517                 if (target != CAM_TARGET_WILDCARD && tstate == NULL) {
7518                         tstate = ahc_alloc_tstate(ahc, target, channel);
7519                         if (tstate == NULL) {
7520                                 xpt_print_path(ccb->ccb_h.path);
7521                                 printk("Couldn't allocate tstate\n");
7522                                 ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
7523                                 return;
7524                         }
7525                 }
7526                 lstate = kzalloc(sizeof(*lstate), GFP_ATOMIC);
7527                 if (lstate == NULL) {
7528                         xpt_print_path(ccb->ccb_h.path);
7529                         printk("Couldn't allocate lstate\n");
7530                         ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
7531                         return;
7532                 }
7533                 status = xpt_create_path(&lstate->path, /*periph*/NULL,
7534                                          xpt_path_path_id(ccb->ccb_h.path),
7535                                          xpt_path_target_id(ccb->ccb_h.path),
7536                                          xpt_path_lun_id(ccb->ccb_h.path));
7537                 if (status != CAM_REQ_CMP) {
7538                         kfree(lstate);
7539                         xpt_print_path(ccb->ccb_h.path);
7540                         printk("Couldn't allocate path\n");
7541                         ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
7542                         return;
7543                 }
7544                 SLIST_INIT(&lstate->accept_tios);
7545                 SLIST_INIT(&lstate->immed_notifies);
7546                 ahc_lock(ahc, &s);
7547                 ahc_pause(ahc);
7548                 if (target != CAM_TARGET_WILDCARD) {
7549                         tstate->enabled_luns[lun] = lstate;
7550                         ahc->enabled_luns++;
7551
7552                         if ((ahc->features & AHC_MULTI_TID) != 0) {
7553                                 u_int targid_mask;
7554
7555                                 targid_mask = ahc_inb(ahc, TARGID)
7556                                             | (ahc_inb(ahc, TARGID + 1) << 8);
7557
7558                                 targid_mask |= target_mask;
7559                                 ahc_outb(ahc, TARGID, targid_mask);
7560                                 ahc_outb(ahc, TARGID+1, (targid_mask >> 8));
7561
7562                                 ahc_update_scsiid(ahc, targid_mask);
7563                         } else {
7564                                 u_int our_id;
7565                                 char  channel;
7566
7567                                 channel = SIM_CHANNEL(ahc, sim);
7568                                 our_id = SIM_SCSI_ID(ahc, sim);
7569
7570                                 /*
7571                                  * This can only happen if selections
7572                                  * are not enabled
7573                                  */
7574                                 if (target != our_id) {
7575                                         u_int sblkctl;
7576                                         char  cur_channel;
7577                                         int   swap;
7578
7579                                         sblkctl = ahc_inb(ahc, SBLKCTL);
7580                                         cur_channel = (sblkctl & SELBUSB)
7581                                                     ? 'B' : 'A';
7582                                         if ((ahc->features & AHC_TWIN) == 0)
7583                                                 cur_channel = 'A';
7584                                         swap = cur_channel != channel;
7585                                         if (channel == 'A')
7586                                                 ahc->our_id = target;
7587                                         else
7588                                                 ahc->our_id_b = target;
7589
7590                                         if (swap)
7591                                                 ahc_outb(ahc, SBLKCTL,
7592                                                          sblkctl ^ SELBUSB);
7593
7594                                         ahc_outb(ahc, SCSIID, target);
7595
7596                                         if (swap)
7597                                                 ahc_outb(ahc, SBLKCTL, sblkctl);
7598                                 }
7599                         }
7600                 } else
7601                         ahc->black_hole = lstate;
7602                 /* Allow select-in operations */
7603                 if (ahc->black_hole != NULL && ahc->enabled_luns > 0) {
7604                         scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE);
7605                         scsiseq |= ENSELI;
7606                         ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq);
7607                         scsiseq = ahc_inb(ahc, SCSISEQ);
7608                         scsiseq |= ENSELI;
7609                         ahc_outb(ahc, SCSISEQ, scsiseq);
7610                 }
7611                 ahc_unpause(ahc);
7612                 ahc_unlock(ahc, &s);
7613                 ccb->ccb_h.status = CAM_REQ_CMP;
7614                 xpt_print_path(ccb->ccb_h.path);
7615                 printk("Lun now enabled for target mode\n");
7616         } else {
7617                 struct scb *scb;
7618                 int i, empty;
7619
7620                 if (lstate == NULL) {
7621                         ccb->ccb_h.status = CAM_LUN_INVALID;
7622                         return;
7623                 }
7624
7625                 ahc_lock(ahc, &s);
7626
7627                 ccb->ccb_h.status = CAM_REQ_CMP;
7628                 LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) {
7629                         struct ccb_hdr *ccbh;
7630
7631                         ccbh = &scb->io_ctx->ccb_h;
7632                         if (ccbh->func_code == XPT_CONT_TARGET_IO
7633                          && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){
7634                                 printk("CTIO pending\n");
7635                                 ccb->ccb_h.status = CAM_REQ_INVALID;
7636                                 ahc_unlock(ahc, &s);
7637                                 return;
7638                         }
7639                 }
7640
7641                 if (SLIST_FIRST(&lstate->accept_tios) != NULL) {
7642                         printk("ATIOs pending\n");
7643                         ccb->ccb_h.status = CAM_REQ_INVALID;
7644                 }
7645
7646                 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) {
7647                         printk("INOTs pending\n");
7648                         ccb->ccb_h.status = CAM_REQ_INVALID;
7649                 }
7650
7651                 if (ccb->ccb_h.status != CAM_REQ_CMP) {
7652                         ahc_unlock(ahc, &s);
7653                         return;
7654                 }
7655
7656                 xpt_print_path(ccb->ccb_h.path);
7657                 printk("Target mode disabled\n");
7658                 xpt_free_path(lstate->path);
7659                 kfree(lstate);
7660
7661                 ahc_pause(ahc);
7662                 /* Can we clean up the target too? */
7663                 if (target != CAM_TARGET_WILDCARD) {
7664                         tstate->enabled_luns[lun] = NULL;
7665                         ahc->enabled_luns--;
7666                         for (empty = 1, i = 0; i < 8; i++)
7667                                 if (tstate->enabled_luns[i] != NULL) {
7668                                         empty = 0;
7669                                         break;
7670                                 }
7671
7672                         if (empty) {
7673                                 ahc_free_tstate(ahc, target, channel,
7674                                                 /*force*/FALSE);
7675                                 if (ahc->features & AHC_MULTI_TID) {
7676                                         u_int targid_mask;
7677
7678                                         targid_mask = ahc_inb(ahc, TARGID)
7679                                                     | (ahc_inb(ahc, TARGID + 1)
7680                                                        << 8);
7681
7682                                         targid_mask &= ~target_mask;
7683                                         ahc_outb(ahc, TARGID, targid_mask);
7684                                         ahc_outb(ahc, TARGID+1,
7685                                                  (targid_mask >> 8));
7686                                         ahc_update_scsiid(ahc, targid_mask);
7687                                 }
7688                         }
7689                 } else {
7690
7691                         ahc->black_hole = NULL;
7692
7693                         /*
7694                          * We can't allow selections without
7695                          * our black hole device.
7696                          */
7697                         empty = TRUE;
7698                 }
7699                 if (ahc->enabled_luns == 0) {
7700                         /* Disallow select-in */
7701                         u_int scsiseq;
7702
7703                         scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE);
7704                         scsiseq &= ~ENSELI;
7705                         ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq);
7706                         scsiseq = ahc_inb(ahc, SCSISEQ);
7707                         scsiseq &= ~ENSELI;
7708                         ahc_outb(ahc, SCSISEQ, scsiseq);
7709
7710                         if ((ahc->features & AHC_MULTIROLE) == 0) {
7711                                 printk("Configuring Initiator Mode\n");
7712                                 ahc->flags &= ~AHC_TARGETROLE;
7713                                 ahc->flags |= AHC_INITIATORROLE;
7714                                 /*
7715                                  * Returning to a configuration that
7716                                  * fit previously will always succeed.
7717                                  */
7718                                 (void)ahc_loadseq(ahc);
7719                                 ahc_restart(ahc);
7720                                 /*
7721                                  * Unpaused.  The extra unpause
7722                                  * that follows is harmless.
7723                                  */
7724                         }
7725                 }
7726                 ahc_unpause(ahc);
7727                 ahc_unlock(ahc, &s);
7728         }
7729 }
7730
7731 static void
7732 ahc_update_scsiid(struct ahc_softc *ahc, u_int targid_mask)
7733 {
7734         u_int scsiid_mask;
7735         u_int scsiid;
7736
7737         if ((ahc->features & AHC_MULTI_TID) == 0)
7738                 panic("ahc_update_scsiid called on non-multitid unit\n");
7739
7740         /*
7741          * Since we will rely on the TARGID mask
7742          * for selection enables, ensure that OID
7743          * in SCSIID is not set to some other ID
7744          * that we don't want to allow selections on.
7745          */
7746         if ((ahc->features & AHC_ULTRA2) != 0)
7747                 scsiid = ahc_inb(ahc, SCSIID_ULTRA2);
7748         else
7749                 scsiid = ahc_inb(ahc, SCSIID);
7750         scsiid_mask = 0x1 << (scsiid & OID);
7751         if ((targid_mask & scsiid_mask) == 0) {
7752                 u_int our_id;
7753
7754                 /* ffs counts from 1 */
7755                 our_id = ffs(targid_mask);
7756                 if (our_id == 0)
7757                         our_id = ahc->our_id;
7758                 else
7759                         our_id--;
7760                 scsiid &= TID;
7761                 scsiid |= our_id;
7762         }
7763         if ((ahc->features & AHC_ULTRA2) != 0)
7764                 ahc_outb(ahc, SCSIID_ULTRA2, scsiid);
7765         else
7766                 ahc_outb(ahc, SCSIID, scsiid);
7767 }
7768
7769 static void
7770 ahc_run_tqinfifo(struct ahc_softc *ahc, int paused)
7771 {
7772         struct target_cmd *cmd;
7773
7774         /*
7775          * If the card supports auto-access pause,
7776          * we can access the card directly regardless
7777          * of whether it is paused or not.
7778          */
7779         if ((ahc->features & AHC_AUTOPAUSE) != 0)
7780                 paused = TRUE;
7781
7782         ahc_sync_tqinfifo(ahc, BUS_DMASYNC_POSTREAD);
7783         while ((cmd = &ahc->targetcmds[ahc->tqinfifonext])->cmd_valid != 0) {
7784
7785                 /*
7786                  * Only advance through the queue if we
7787                  * have the resources to process the command.
7788                  */
7789                 if (ahc_handle_target_cmd(ahc, cmd) != 0)
7790                         break;
7791
7792                 cmd->cmd_valid = 0;
7793                 ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
7794                                 ahc->shared_data_dmamap,
7795                                 ahc_targetcmd_offset(ahc, ahc->tqinfifonext),
7796                                 sizeof(struct target_cmd),
7797                                 BUS_DMASYNC_PREREAD);
7798                 ahc->tqinfifonext++;
7799
7800                 /*
7801                  * Lazily update our position in the target mode incoming
7802                  * command queue as seen by the sequencer.
7803                  */
7804                 if ((ahc->tqinfifonext & (HOST_TQINPOS - 1)) == 1) {
7805                         if ((ahc->features & AHC_HS_MAILBOX) != 0) {
7806                                 u_int hs_mailbox;
7807
7808                                 hs_mailbox = ahc_inb(ahc, HS_MAILBOX);
7809                                 hs_mailbox &= ~HOST_TQINPOS;
7810                                 hs_mailbox |= ahc->tqinfifonext & HOST_TQINPOS;
7811                                 ahc_outb(ahc, HS_MAILBOX, hs_mailbox);
7812                         } else {
7813                                 if (!paused)
7814                                         ahc_pause(ahc);
7815                                 ahc_outb(ahc, KERNEL_TQINPOS,
7816                                          ahc->tqinfifonext & HOST_TQINPOS);
7817                                 if (!paused)
7818                                         ahc_unpause(ahc);
7819                         }
7820                 }
7821         }
7822 }
7823
7824 static int
7825 ahc_handle_target_cmd(struct ahc_softc *ahc, struct target_cmd *cmd)
7826 {
7827         struct    ahc_tmode_tstate *tstate;
7828         struct    ahc_tmode_lstate *lstate;
7829         struct    ccb_accept_tio *atio;
7830         uint8_t *byte;
7831         int       initiator;
7832         int       target;
7833         int       lun;
7834
7835         initiator = SCSIID_TARGET(ahc, cmd->scsiid);
7836         target = SCSIID_OUR_ID(cmd->scsiid);
7837         lun    = (cmd->identify & MSG_IDENTIFY_LUNMASK);
7838
7839         byte = cmd->bytes;
7840         tstate = ahc->enabled_targets[target];
7841         lstate = NULL;
7842         if (tstate != NULL)
7843                 lstate = tstate->enabled_luns[lun];
7844
7845         /*
7846          * Commands for disabled luns go to the black hole driver.
7847          */
7848         if (lstate == NULL)
7849                 lstate = ahc->black_hole;
7850
7851         atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios);
7852         if (atio == NULL) {
7853                 ahc->flags |= AHC_TQINFIFO_BLOCKED;
7854                 /*
7855                  * Wait for more ATIOs from the peripheral driver for this lun.
7856                  */
7857                 if (bootverbose)
7858                         printk("%s: ATIOs exhausted\n", ahc_name(ahc));
7859                 return (1);
7860         } else
7861                 ahc->flags &= ~AHC_TQINFIFO_BLOCKED;
7862 #if 0
7863         printk("Incoming command from %d for %d:%d%s\n",
7864                initiator, target, lun,
7865                lstate == ahc->black_hole ? "(Black Holed)" : "");
7866 #endif
7867         SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle);
7868
7869         if (lstate == ahc->black_hole) {
7870                 /* Fill in the wildcards */
7871                 atio->ccb_h.target_id = target;
7872                 atio->ccb_h.target_lun = lun;
7873         }
7874
7875         /*
7876          * Package it up and send it off to
7877          * whomever has this lun enabled.
7878          */
7879         atio->sense_len = 0;
7880         atio->init_id = initiator;
7881         if (byte[0] != 0xFF) {
7882                 /* Tag was included */
7883                 atio->tag_action = *byte++;
7884                 atio->tag_id = *byte++;
7885                 atio->ccb_h.flags = CAM_TAG_ACTION_VALID;
7886         } else {
7887                 atio->ccb_h.flags = 0;
7888         }
7889         byte++;
7890
7891         /* Okay.  Now determine the cdb size based on the command code */
7892         switch (*byte >> CMD_GROUP_CODE_SHIFT) {
7893         case 0:
7894                 atio->cdb_len = 6;
7895                 break;
7896         case 1:
7897         case 2:
7898                 atio->cdb_len = 10;
7899                 break;
7900         case 4:
7901                 atio->cdb_len = 16;
7902                 break;
7903         case 5:
7904                 atio->cdb_len = 12;
7905                 break;
7906         case 3:
7907         default:
7908                 /* Only copy the opcode. */
7909                 atio->cdb_len = 1;
7910                 printk("Reserved or VU command code type encountered\n");
7911                 break;
7912         }
7913
7914         memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len);
7915
7916         atio->ccb_h.status |= CAM_CDB_RECVD;
7917
7918         if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) {
7919                 /*
7920                  * We weren't allowed to disconnect.
7921                  * We're hanging on the bus until a
7922                  * continue target I/O comes in response
7923                  * to this accept tio.
7924                  */
7925 #if 0
7926                 printk("Received Immediate Command %d:%d:%d - %p\n",
7927                        initiator, target, lun, ahc->pending_device);
7928 #endif
7929                 ahc->pending_device = lstate;
7930                 ahc_freeze_ccb((union ccb *)atio);
7931                 atio->ccb_h.flags |= CAM_DIS_DISCONNECT;
7932         }
7933         xpt_done((union ccb*)atio);
7934         return (0);
7935 }
7936
7937 #endif