Linux-libre 3.16.85-gnu
[librecmc/linux-libre.git] / drivers / remoteproc / da8xx_remoteproc.c
1 /*
2  * Remote processor machine-specific module for DA8XX
3  *
4  * Copyright (C) 2013 Texas Instruments, Inc.
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * version 2 as published by the Free Software Foundation.
9  */
10
11 #include <linux/bitops.h>
12 #include <linux/clk.h>
13 #include <linux/err.h>
14 #include <linux/interrupt.h>
15 #include <linux/io.h>
16 #include <linux/irq.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/platform_device.h>
20 #include <linux/remoteproc.h>
21
22 #include <mach/clock.h>   /* for davinci_clk_reset_assert/deassert() */
23
24 #include "remoteproc_internal.h"
25
26 static char *da8xx_fw_name;
27 module_param(da8xx_fw_name, charp, S_IRUGO);
28 MODULE_PARM_DESC(da8xx_fw_name,
29                  "\n\t\tName of DSP firmware file in /lib/firmware"
30                  " (if not specified defaults to 'rproc-dsp-fw')");
31
32 /*
33  * OMAP-L138 Technical References:
34  * http://www.ti.com/product/omap-l138
35  */
36 #define SYSCFG_CHIPSIG0 BIT(0)
37 #define SYSCFG_CHIPSIG1 BIT(1)
38 #define SYSCFG_CHIPSIG2 BIT(2)
39 #define SYSCFG_CHIPSIG3 BIT(3)
40 #define SYSCFG_CHIPSIG4 BIT(4)
41
42 /**
43  * struct da8xx_rproc - da8xx remote processor instance state
44  * @rproc: rproc handle
45  * @dsp_clk: placeholder for platform's DSP clk
46  * @ack_fxn: chip-specific ack function for ack'ing irq
47  * @irq_data: ack_fxn function parameter
48  * @chipsig: virt ptr to DSP interrupt registers (CHIPSIG & CHIPSIG_CLR)
49  * @bootreg: virt ptr to DSP boot address register (HOST1CFG)
50  * @irq: irq # used by this instance
51  */
52 struct da8xx_rproc {
53         struct rproc *rproc;
54         struct clk *dsp_clk;
55         void (*ack_fxn)(struct irq_data *data);
56         struct irq_data *irq_data;
57         void __iomem *chipsig;
58         void __iomem *bootreg;
59         int irq;
60 };
61
62 /**
63  * handle_event() - inbound virtqueue message workqueue function
64  *
65  * This function is registered as a kernel thread and is scheduled by the
66  * kernel handler.
67  */
68 static irqreturn_t handle_event(int irq, void *p)
69 {
70         struct rproc *rproc = (struct rproc *)p;
71
72         /* Process incoming buffers on all our vrings */
73         rproc_vq_interrupt(rproc, 0);
74         rproc_vq_interrupt(rproc, 1);
75
76         return IRQ_HANDLED;
77 }
78
79 /**
80  * da8xx_rproc_callback() - inbound virtqueue message handler
81  *
82  * This handler is invoked directly by the kernel whenever the remote
83  * core (DSP) has modified the state of a virtqueue.  There is no
84  * "payload" message indicating the virtqueue index as is the case with
85  * mailbox-based implementations on OMAP4.  As such, this handler "polls"
86  * each known virtqueue index for every invocation.
87  */
88 static irqreturn_t da8xx_rproc_callback(int irq, void *p)
89 {
90         struct rproc *rproc = (struct rproc *)p;
91         struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
92         u32 chipsig;
93
94         chipsig = readl(drproc->chipsig);
95         if (chipsig & SYSCFG_CHIPSIG0) {
96                 /* Clear interrupt level source */
97                 writel(SYSCFG_CHIPSIG0, drproc->chipsig + 4);
98
99                 /*
100                  * ACK intr to AINTC.
101                  *
102                  * It has already been ack'ed by the kernel before calling
103                  * this function, but since the ARM<->DSP interrupts in the
104                  * CHIPSIG register are "level" instead of "pulse" variety,
105                  * we need to ack it after taking down the level else we'll
106                  * be called again immediately after returning.
107                  */
108                 drproc->ack_fxn(drproc->irq_data);
109
110                 return IRQ_WAKE_THREAD;
111         }
112
113         return IRQ_HANDLED;
114 }
115
116 static int da8xx_rproc_start(struct rproc *rproc)
117 {
118         struct device *dev = rproc->dev.parent;
119         struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
120         struct clk *dsp_clk = drproc->dsp_clk;
121
122         /* hw requires the start (boot) address be on 1KB boundary */
123         if (rproc->bootaddr & 0x3ff) {
124                 dev_err(dev, "invalid boot address: must be aligned to 1KB\n");
125
126                 return -EINVAL;
127         }
128
129         writel(rproc->bootaddr, drproc->bootreg);
130
131         clk_enable(dsp_clk);
132         davinci_clk_reset_deassert(dsp_clk);
133
134         return 0;
135 }
136
137 static int da8xx_rproc_stop(struct rproc *rproc)
138 {
139         struct da8xx_rproc *drproc = rproc->priv;
140
141         clk_disable(drproc->dsp_clk);
142
143         return 0;
144 }
145
146 /* kick a virtqueue */
147 static void da8xx_rproc_kick(struct rproc *rproc, int vqid)
148 {
149         struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
150
151         /* Interupt remote proc */
152         writel(SYSCFG_CHIPSIG2, drproc->chipsig);
153 }
154
155 static struct rproc_ops da8xx_rproc_ops = {
156         .start = da8xx_rproc_start,
157         .stop = da8xx_rproc_stop,
158         .kick = da8xx_rproc_kick,
159 };
160
161 static int reset_assert(struct device *dev)
162 {
163         struct clk *dsp_clk;
164
165         dsp_clk = clk_get(dev, NULL);
166         if (IS_ERR(dsp_clk)) {
167                 dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk));
168                 return PTR_ERR(dsp_clk);
169         }
170
171         davinci_clk_reset_assert(dsp_clk);
172         clk_put(dsp_clk);
173
174         return 0;
175 }
176
177 static int da8xx_rproc_probe(struct platform_device *pdev)
178 {
179         struct device *dev = &pdev->dev;
180         struct da8xx_rproc *drproc;
181         struct rproc *rproc;
182         struct irq_data *irq_data;
183         struct resource *bootreg_res;
184         struct resource *chipsig_res;
185         struct clk *dsp_clk;
186         void __iomem *chipsig;
187         void __iomem *bootreg;
188         int irq;
189         int ret;
190
191         irq = platform_get_irq(pdev, 0);
192         if (irq < 0) {
193                 dev_err(dev, "platform_get_irq(pdev, 0) error: %d\n", irq);
194                 return irq;
195         }
196
197         irq_data = irq_get_irq_data(irq);
198         if (!irq_data) {
199                 dev_err(dev, "irq_get_irq_data(%d): NULL\n", irq);
200                 return -EINVAL;
201         }
202
203         bootreg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
204         bootreg = devm_ioremap_resource(dev, bootreg_res);
205         if (IS_ERR(bootreg))
206                 return PTR_ERR(bootreg);
207
208         chipsig_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
209         chipsig = devm_ioremap_resource(dev, chipsig_res);
210         if (IS_ERR(chipsig))
211                 return PTR_ERR(chipsig);
212
213         dsp_clk = devm_clk_get(dev, NULL);
214         if (IS_ERR(dsp_clk)) {
215                 dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk));
216
217                 return PTR_ERR(dsp_clk);
218         }
219
220         rproc = rproc_alloc(dev, "dsp", &da8xx_rproc_ops, da8xx_fw_name,
221                 sizeof(*drproc));
222         if (!rproc)
223                 return -ENOMEM;
224
225         drproc = rproc->priv;
226         drproc->rproc = rproc;
227
228         platform_set_drvdata(pdev, rproc);
229
230         /* everything the ISR needs is now setup, so hook it up */
231         ret = devm_request_threaded_irq(dev, irq, da8xx_rproc_callback,
232                                         handle_event, 0, "da8xx-remoteproc",
233                                         rproc);
234         if (ret) {
235                 dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
236                 goto free_rproc;
237         }
238
239         /*
240          * rproc_add() can end up enabling the DSP's clk with the DSP
241          * *not* in reset, but da8xx_rproc_start() needs the DSP to be
242          * held in reset at the time it is called.
243          */
244         ret = reset_assert(dev);
245         if (ret)
246                 goto free_rproc;
247
248         drproc->chipsig = chipsig;
249         drproc->bootreg = bootreg;
250         drproc->ack_fxn = irq_data->chip->irq_ack;
251         drproc->irq_data = irq_data;
252         drproc->irq = irq;
253         drproc->dsp_clk = dsp_clk;
254
255         ret = rproc_add(rproc);
256         if (ret) {
257                 dev_err(dev, "rproc_add failed: %d\n", ret);
258                 goto free_rproc;
259         }
260
261         return 0;
262
263 free_rproc:
264         rproc_put(rproc);
265
266         return ret;
267 }
268
269 static int da8xx_rproc_remove(struct platform_device *pdev)
270 {
271         struct device *dev = &pdev->dev;
272         struct rproc *rproc = platform_get_drvdata(pdev);
273         struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
274
275         /*
276          * It's important to place the DSP in reset before going away,
277          * since a subsequent insmod of this module may enable the DSP's
278          * clock before its program/boot-address has been loaded and
279          * before this module's probe has had a chance to reset the DSP.
280          * Without the reset, the DSP can lockup permanently when it
281          * begins executing garbage.
282          */
283         reset_assert(dev);
284
285         /*
286          * The devm subsystem might end up releasing things before
287          * freeing the irq, thus allowing an interrupt to sneak in while
288          * the device is being removed.  This should prevent that.
289          */
290         disable_irq(drproc->irq);
291
292         rproc_del(rproc);
293         rproc_put(rproc);
294
295         return 0;
296 }
297
298 static struct platform_driver da8xx_rproc_driver = {
299         .probe = da8xx_rproc_probe,
300         .remove = da8xx_rproc_remove,
301         .driver = {
302                 .name = "davinci-rproc",
303                 .owner = THIS_MODULE,
304         },
305 };
306
307 module_platform_driver(da8xx_rproc_driver);
308
309 MODULE_LICENSE("GPL v2");
310 MODULE_DESCRIPTION("DA8XX Remote Processor control driver");