drivers/phy/ti/phy-tusb1210.c

   1 /**
   2  * tusb1210.c - TUSB1210 USB ULPI PHY driver
   3  *
   4  * Copyright (C) 2015 Intel Corporation
   5  *
   6  * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12 #include <linux/module.h>
  13 #include <linux/ulpi/driver.h>
  14 #include <linux/ulpi/regs.h>
  15 #include <linux/gpio/consumer.h>
  16 #include <linux/phy/ulpi_phy.h>
  17
  18 #define TUSB1210_VENDOR_SPECIFIC2               0x80
  19 #define TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT   0
  20 #define TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT  4
  21 #define TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT      6
  22
  23 struct tusb1210 {
  24         struct ulpi *ulpi;
  25         struct phy *phy;
  26         struct gpio_desc *gpio_reset;
  27         struct gpio_desc *gpio_cs;
  28         u8 vendor_specific2;
  29 };
  30
  31 static int tusb1210_power_on(struct phy *phy)
  32 {
  33         struct tusb1210 *tusb = phy_get_drvdata(phy);
  34
  35         gpiod_set_value_cansleep(tusb->gpio_reset, 1);
  36         gpiod_set_value_cansleep(tusb->gpio_cs, 1);
  37
  38         /* Restore the optional eye diagram optimization value */
  39         if (tusb->vendor_specific2)
  40                 ulpi_write(tusb->ulpi, TUSB1210_VENDOR_SPECIFIC2,
  41                            tusb->vendor_specific2);
  42
  43         return 0;
  44 }
  45
  46 static int tusb1210_power_off(struct phy *phy)
  47 {
  48         struct tusb1210 *tusb = phy_get_drvdata(phy);
  49
  50         gpiod_set_value_cansleep(tusb->gpio_reset, 0);
  51         gpiod_set_value_cansleep(tusb->gpio_cs, 0);
  52
  53         return 0;
  54 }
  55
  56 static int tusb1210_set_mode(struct phy *phy, enum phy_mode mode)
  57 {
  58         struct tusb1210 *tusb = phy_get_drvdata(phy);
  59         int ret;
  60
  61         ret = ulpi_read(tusb->ulpi, ULPI_OTG_CTRL);
  62         if (ret < 0)
  63                 return ret;
  64
  65         switch (mode) {
  66         case PHY_MODE_USB_HOST:
  67                 ret |= (ULPI_OTG_CTRL_DRVVBUS_EXT
  68                         | ULPI_OTG_CTRL_ID_PULLUP
  69                         | ULPI_OTG_CTRL_DP_PULLDOWN
  70                         | ULPI_OTG_CTRL_DM_PULLDOWN);
  71                 ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
  72                 ret |= ULPI_OTG_CTRL_DRVVBUS;
  73                 break;
  74         case PHY_MODE_USB_DEVICE:
  75                 ret &= ~(ULPI_OTG_CTRL_DRVVBUS
  76                          | ULPI_OTG_CTRL_DP_PULLDOWN
  77                          | ULPI_OTG_CTRL_DM_PULLDOWN);
  78                 ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
  79                 ret &= ~ULPI_OTG_CTRL_DRVVBUS_EXT;
  80                 break;
  81         default:
  82                 /* nothing */
  83                 return 0;
  84         }
  85
  86         return ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
  87 }
  88
  89 static const struct phy_ops phy_ops = {
  90         .power_on = tusb1210_power_on,
  91         .power_off = tusb1210_power_off,
  92         .set_mode = tusb1210_set_mode,
  93         .owner = THIS_MODULE,
  94 };
  95
  96 static int tusb1210_probe(struct ulpi *ulpi)
  97 {
  98         struct tusb1210 *tusb;
  99         u8 val, reg;
 100
 101         tusb = devm_kzalloc(&ulpi->dev, sizeof(*tusb), GFP_KERNEL);
 102         if (!tusb)
 103                 return -ENOMEM;
 104
 105         tusb->gpio_reset = devm_gpiod_get_optional(&ulpi->dev, "reset",
 106                                                    GPIOD_OUT_LOW);
 107         if (IS_ERR(tusb->gpio_reset))
 108                 return PTR_ERR(tusb->gpio_reset);
 109
 110         gpiod_set_value_cansleep(tusb->gpio_reset, 1);
 111
 112         tusb->gpio_cs = devm_gpiod_get_optional(&ulpi->dev, "cs",
 113                                                 GPIOD_OUT_LOW);
 114         if (IS_ERR(tusb->gpio_cs))
 115                 return PTR_ERR(tusb->gpio_cs);
 116
 117         gpiod_set_value_cansleep(tusb->gpio_cs, 1);
 118
 119         /*
 120          * VENDOR_SPECIFIC2 register in TUSB1210 can be used for configuring eye
 121          * diagram optimization and DP/DM swap.
 122          */
 123
 124         /* High speed output drive strength configuration */
 125         device_property_read_u8(&ulpi->dev, "ihstx", &val);
 126         reg = val << TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT;
 127
 128         /* High speed output impedance configuration */
 129         device_property_read_u8(&ulpi->dev, "zhsdrv", &val);
 130         reg |= val << TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT;
 131
 132         /* DP/DM swap control */
 133         device_property_read_u8(&ulpi->dev, "datapolarity", &val);
 134         reg |= val << TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT;
 135
 136         if (reg) {
 137                 ulpi_write(ulpi, TUSB1210_VENDOR_SPECIFIC2, reg);
 138                 tusb->vendor_specific2 = reg;
 139         }
 140
 141         tusb->phy = ulpi_phy_create(ulpi, &phy_ops);
 142         if (IS_ERR(tusb->phy))
 143                 return PTR_ERR(tusb->phy);
 144
 145         tusb->ulpi = ulpi;
 146
 147         phy_set_drvdata(tusb->phy, tusb);
 148         ulpi_set_drvdata(ulpi, tusb);
 149         return 0;
 150 }
 151
 152 static void tusb1210_remove(struct ulpi *ulpi)
 153 {
 154         struct tusb1210 *tusb = ulpi_get_drvdata(ulpi);
 155
 156         ulpi_phy_destroy(ulpi, tusb->phy);
 157 }
 158
 159 #define TI_VENDOR_ID 0x0451
 160
 161 static const struct ulpi_device_id tusb1210_ulpi_id[] = {
 162         { TI_VENDOR_ID, 0x1507, },  /* TUSB1210 */
 163         { TI_VENDOR_ID, 0x1508, },  /* TUSB1211 */
 164         { },
 165 };
 166 MODULE_DEVICE_TABLE(ulpi, tusb1210_ulpi_id);
 167
 168 static struct ulpi_driver tusb1210_driver = {
 169         .id_table = tusb1210_ulpi_id,
 170         .probe = tusb1210_probe,
 171         .remove = tusb1210_remove,
 172         .driver = {
 173                 .name = "tusb1210",
 174                 .owner = THIS_MODULE,
 175         },
 176 };
 177
 178 module_ulpi_driver(tusb1210_driver);
 179
 180 MODULE_AUTHOR("Intel Corporation");
 181 MODULE_LICENSE("GPL v2");
 182 MODULE_DESCRIPTION("TUSB1210 ULPI PHY driver");