drivers/phy/phy-exynos5-usbdrd.c

   1 /*
   2  * Samsung EXYNOS5 SoC series USB DRD PHY driver
   3  *
   4  * Phy provider for USB 3.0 DRD controller on Exynos5 SoC series
   5  *
   6  * Copyright (C) 2014 Samsung Electronics Co., Ltd.
   7  * Author: Vivek Gautam <gautam.vivek@samsung.com>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13
  14 #include <linux/clk.h>
  15 #include <linux/delay.h>
  16 #include <linux/io.h>
  17 #include <linux/kernel.h>
  18 #include <linux/module.h>
  19 #include <linux/of.h>
  20 #include <linux/of_address.h>
  21 #include <linux/phy/phy.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/mutex.h>
  24 #include <linux/mfd/syscon.h>
  25 #include <linux/mfd/syscon/exynos5-pmu.h>
  26 #include <linux/regmap.h>
  27 #include <linux/regulator/consumer.h>
  28
  29 /* Exynos USB PHY registers */
  30 #define EXYNOS5_FSEL_9MHZ6              0x0
  31 #define EXYNOS5_FSEL_10MHZ              0x1
  32 #define EXYNOS5_FSEL_12MHZ              0x2
  33 #define EXYNOS5_FSEL_19MHZ2             0x3
  34 #define EXYNOS5_FSEL_20MHZ              0x4
  35 #define EXYNOS5_FSEL_24MHZ              0x5
  36 #define EXYNOS5_FSEL_50MHZ              0x7
  37
  38 /* EXYNOS5: USB 3.0 DRD PHY registers */
  39 #define EXYNOS5_DRD_LINKSYSTEM                  0x04
  40
  41 #define LINKSYSTEM_FLADJ_MASK                   (0x3f << 1)
  42 #define LINKSYSTEM_FLADJ(_x)                    ((_x) << 1)
  43 #define LINKSYSTEM_XHCI_VERSION_CONTROL         BIT(27)
  44
  45 #define EXYNOS5_DRD_PHYUTMI                     0x08
  46
  47 #define PHYUTMI_OTGDISABLE                      BIT(6)
  48 #define PHYUTMI_FORCESUSPEND                    BIT(1)
  49 #define PHYUTMI_FORCESLEEP                      BIT(0)
  50
  51 #define EXYNOS5_DRD_PHYPIPE                     0x0c
  52
  53 #define EXYNOS5_DRD_PHYCLKRST                   0x10
  54
  55 #define PHYCLKRST_EN_UTMISUSPEND                BIT(31)
  56
  57 #define PHYCLKRST_SSC_REFCLKSEL_MASK            (0xff << 23)
  58 #define PHYCLKRST_SSC_REFCLKSEL(_x)             ((_x) << 23)
  59
  60 #define PHYCLKRST_SSC_RANGE_MASK                (0x03 << 21)
  61 #define PHYCLKRST_SSC_RANGE(_x)                 ((_x) << 21)
  62
  63 #define PHYCLKRST_SSC_EN                        BIT(20)
  64 #define PHYCLKRST_REF_SSP_EN                    BIT(19)
  65 #define PHYCLKRST_REF_CLKDIV2                   BIT(18)
  66
  67 #define PHYCLKRST_MPLL_MULTIPLIER_MASK          (0x7f << 11)
  68 #define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF    (0x19 << 11)
  69 #define PHYCLKRST_MPLL_MULTIPLIER_50M_REF       (0x32 << 11)
  70 #define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF     (0x68 << 11)
  71 #define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF     (0x7d << 11)
  72 #define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF  (0x02 << 11)
  73
  74 #define PHYCLKRST_FSEL_UTMI_MASK                (0x7 << 5)
  75 #define PHYCLKRST_FSEL_PIPE_MASK                (0x7 << 8)
  76 #define PHYCLKRST_FSEL(_x)                      ((_x) << 5)
  77 #define PHYCLKRST_FSEL_PAD_100MHZ               (0x27 << 5)
  78 #define PHYCLKRST_FSEL_PAD_24MHZ                (0x2a << 5)
  79 #define PHYCLKRST_FSEL_PAD_20MHZ                (0x31 << 5)
  80 #define PHYCLKRST_FSEL_PAD_19_2MHZ              (0x38 << 5)
  81
  82 #define PHYCLKRST_RETENABLEN                    BIT(4)
  83
  84 #define PHYCLKRST_REFCLKSEL_MASK                (0x03 << 2)
  85 #define PHYCLKRST_REFCLKSEL_PAD_REFCLK          (0x2 << 2)
  86 #define PHYCLKRST_REFCLKSEL_EXT_REFCLK          (0x3 << 2)
  87
  88 #define PHYCLKRST_PORTRESET                     BIT(1)
  89 #define PHYCLKRST_COMMONONN                     BIT(0)
  90
  91 #define EXYNOS5_DRD_PHYREG0                     0x14
  92 #define EXYNOS5_DRD_PHYREG1                     0x18
  93
  94 #define EXYNOS5_DRD_PHYPARAM0                   0x1c
  95
  96 #define PHYPARAM0_REF_USE_PAD                   BIT(31)
  97 #define PHYPARAM0_REF_LOSLEVEL_MASK             (0x1f << 26)
  98 #define PHYPARAM0_REF_LOSLEVEL                  (0x9 << 26)
  99
 100 #define EXYNOS5_DRD_PHYPARAM1                   0x20
 101
 102 #define PHYPARAM1_PCS_TXDEEMPH_MASK             (0x1f << 0)
 103 #define PHYPARAM1_PCS_TXDEEMPH                  (0x1c)
 104
 105 #define EXYNOS5_DRD_PHYTERM                     0x24
 106
 107 #define EXYNOS5_DRD_PHYTEST                     0x28
 108
 109 #define PHYTEST_POWERDOWN_SSP                   BIT(3)
 110 #define PHYTEST_POWERDOWN_HSP                   BIT(2)
 111
 112 #define EXYNOS5_DRD_PHYADP                      0x2c
 113
 114 #define EXYNOS5_DRD_PHYUTMICLKSEL               0x30
 115
 116 #define PHYUTMICLKSEL_UTMI_CLKSEL               BIT(2)
 117
 118 #define EXYNOS5_DRD_PHYRESUME                   0x34
 119 #define EXYNOS5_DRD_LINKPORT                    0x44
 120
 121 #define KHZ     1000
 122 #define MHZ     (KHZ * KHZ)
 123
 124 enum exynos5_usbdrd_phy_id {
 125         EXYNOS5_DRDPHY_UTMI,
 126         EXYNOS5_DRDPHY_PIPE3,
 127         EXYNOS5_DRDPHYS_NUM,
 128 };
 129
 130 struct phy_usb_instance;
 131 struct exynos5_usbdrd_phy;
 132
 133 struct exynos5_usbdrd_phy_config {
 134         u32 id;
 135         void (*phy_isol)(struct phy_usb_instance *inst, u32 on);
 136         void (*phy_init)(struct exynos5_usbdrd_phy *phy_drd);
 137         unsigned int (*set_refclk)(struct phy_usb_instance *inst);
 138 };
 139
 140 struct exynos5_usbdrd_phy_drvdata {
 141         const struct exynos5_usbdrd_phy_config *phy_cfg;
 142         u32 pmu_offset_usbdrd0_phy;
 143         u32 pmu_offset_usbdrd1_phy;
 144 };
 145
 146 /**
 147  * struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY
 148  * @dev: pointer to device instance of this platform device
 149  * @reg_phy: usb phy controller register memory base
 150  * @clk: phy clock for register access
 151  * @drv_data: pointer to SoC level driver data structure
 152  * @phys[]: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY
 153  *          instances each with its 'phy' and 'phy_cfg'.
 154  * @extrefclk: frequency select settings when using 'separate
 155  *             reference clocks' for SS and HS operations
 156  * @ref_clk: reference clock to PHY block from which PHY's
 157  *           operational clocks are derived
 158  * @ref_rate: rate of above reference clock
 159  */
 160 struct exynos5_usbdrd_phy {
 161         struct device *dev;
 162         void __iomem *reg_phy;
 163         struct clk *clk;
 164         const struct exynos5_usbdrd_phy_drvdata *drv_data;
 165         struct phy_usb_instance {
 166                 struct phy *phy;
 167                 u32 index;
 168                 struct regmap *reg_pmu;
 169                 u32 pmu_offset;
 170                 const struct exynos5_usbdrd_phy_config *phy_cfg;
 171         } phys[EXYNOS5_DRDPHYS_NUM];
 172         u32 extrefclk;
 173         struct clk *ref_clk;
 174         struct regulator *vbus;
 175 };
 176
 177 static inline
 178 struct exynos5_usbdrd_phy *to_usbdrd_phy(struct phy_usb_instance *inst)
 179 {
 180         return container_of((inst), struct exynos5_usbdrd_phy,
 181                             phys[(inst)->index]);
 182 }
 183
 184 /*
 185  * exynos5_rate_to_clk() converts the supplied clock rate to the value that
 186  * can be written to the phy register.
 187  */
 188 static unsigned int exynos5_rate_to_clk(unsigned long rate, u32 *reg)
 189 {
 190         /* EXYNOS5_FSEL_MASK */
 191
 192         switch (rate) {
 193         case 9600 * KHZ:
 194                 *reg = EXYNOS5_FSEL_9MHZ6;
 195                 break;
 196         case 10 * MHZ:
 197                 *reg = EXYNOS5_FSEL_10MHZ;
 198                 break;
 199         case 12 * MHZ:
 200                 *reg = EXYNOS5_FSEL_12MHZ;
 201                 break;
 202         case 19200 * KHZ:
 203                 *reg = EXYNOS5_FSEL_19MHZ2;
 204                 break;
 205         case 20 * MHZ:
 206                 *reg = EXYNOS5_FSEL_20MHZ;
 207                 break;
 208         case 24 * MHZ:
 209                 *reg = EXYNOS5_FSEL_24MHZ;
 210                 break;
 211         case 50 * MHZ:
 212                 *reg = EXYNOS5_FSEL_50MHZ;
 213                 break;
 214         default:
 215                 return -EINVAL;
 216         }
 217
 218         return 0;
 219 }
 220
 221 static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
 222                                                 unsigned int on)
 223 {
 224         unsigned int val;
 225
 226         if (!inst->reg_pmu)
 227                 return;
 228
 229         val = on ? 0 : EXYNOS5_PHY_ENABLE;
 230
 231         regmap_update_bits(inst->reg_pmu, inst->pmu_offset,
 232                            EXYNOS5_PHY_ENABLE, val);
 233 }
 234
 235 /*
 236  * Sets the pipe3 phy's clk as EXTREFCLK (XXTI) which is internal clock
 237  * from clock core. Further sets multiplier values and spread spectrum
 238  * clock settings for SuperSpeed operations.
 239  */
 240 static unsigned int
 241 exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
 242 {
 243         static u32 reg;
 244         struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
 245
 246         /* restore any previous reference clock settings */
 247         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
 248
 249         /* Use EXTREFCLK as ref clock */
 250         reg &= ~PHYCLKRST_REFCLKSEL_MASK;
 251         reg |=  PHYCLKRST_REFCLKSEL_EXT_REFCLK;
 252
 253         /* FSEL settings corresponding to reference clock */
 254         reg &= ~PHYCLKRST_FSEL_PIPE_MASK |
 255                 PHYCLKRST_MPLL_MULTIPLIER_MASK |
 256                 PHYCLKRST_SSC_REFCLKSEL_MASK;
 257         switch (phy_drd->extrefclk) {
 258         case EXYNOS5_FSEL_50MHZ:
 259                 reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF |
 260                         PHYCLKRST_SSC_REFCLKSEL(0x00));
 261                 break;
 262         case EXYNOS5_FSEL_24MHZ:
 263                 reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
 264                         PHYCLKRST_SSC_REFCLKSEL(0x88));
 265                 break;
 266         case EXYNOS5_FSEL_20MHZ:
 267                 reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF |
 268                         PHYCLKRST_SSC_REFCLKSEL(0x00));
 269                 break;
 270         case EXYNOS5_FSEL_19MHZ2:
 271                 reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF |
 272                         PHYCLKRST_SSC_REFCLKSEL(0x88));
 273                 break;
 274         default:
 275                 dev_dbg(phy_drd->dev, "unsupported ref clk\n");
 276                 break;
 277         }
 278
 279         return reg;
 280 }
 281
 282 /*
 283  * Sets the utmi phy's clk as EXTREFCLK (XXTI) which is internal clock
 284  * from clock core. Further sets the FSEL values for HighSpeed operations.
 285  */
 286 static unsigned int
 287 exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst)
 288 {
 289         static u32 reg;
 290         struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
 291
 292         /* restore any previous reference clock settings */
 293         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
 294
 295         reg &= ~PHYCLKRST_REFCLKSEL_MASK;
 296         reg |=  PHYCLKRST_REFCLKSEL_EXT_REFCLK;
 297
 298         reg &= ~PHYCLKRST_FSEL_UTMI_MASK |
 299                 PHYCLKRST_MPLL_MULTIPLIER_MASK |
 300                 PHYCLKRST_SSC_REFCLKSEL_MASK;
 301         reg |= PHYCLKRST_FSEL(phy_drd->extrefclk);
 302
 303         return reg;
 304 }
 305
 306 static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd)
 307 {
 308         u32 reg;
 309
 310         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
 311         /* Set Tx De-Emphasis level */
 312         reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
 313         reg |=  PHYPARAM1_PCS_TXDEEMPH;
 314         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
 315
 316         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
 317         reg &= ~PHYTEST_POWERDOWN_SSP;
 318         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
 319 }
 320
 321 static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
 322 {
 323         u32 reg;
 324
 325         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
 326         /* Set Loss-of-Signal Detector sensitivity */
 327         reg &= ~PHYPARAM0_REF_LOSLEVEL_MASK;
 328         reg |=  PHYPARAM0_REF_LOSLEVEL;
 329         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
 330
 331         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
 332         /* Set Tx De-Emphasis level */
 333         reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
 334         reg |=  PHYPARAM1_PCS_TXDEEMPH;
 335         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
 336
 337         /* UTMI Power Control */
 338         writel(PHYUTMI_OTGDISABLE, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI);
 339
 340         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
 341         reg &= ~PHYTEST_POWERDOWN_HSP;
 342         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
 343 }
 344
 345 static int exynos5_usbdrd_phy_init(struct phy *phy)
 346 {
 347         int ret;
 348         u32 reg;
 349         struct phy_usb_instance *inst = phy_get_drvdata(phy);
 350         struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
 351
 352         ret = clk_prepare_enable(phy_drd->clk);
 353         if (ret)
 354                 return ret;
 355
 356         /* Reset USB 3.0 PHY */
 357         writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
 358         writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYRESUME);
 359
 360         /*
 361          * Setting the Frame length Adj value[6:1] to default 0x20
 362          * See xHCI 1.0 spec, 5.2.4
 363          */
 364         reg =   LINKSYSTEM_XHCI_VERSION_CONTROL |
 365                 LINKSYSTEM_FLADJ(0x20);
 366         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM);
 367
 368         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
 369         /* Select PHY CLK source */
 370         reg &= ~PHYPARAM0_REF_USE_PAD;
 371         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
 372
 373         /* This bit must be set for both HS and SS operations */
 374         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL);
 375         reg |= PHYUTMICLKSEL_UTMI_CLKSEL;
 376         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL);
 377
 378         /* UTMI or PIPE3 specific init */
 379         inst->phy_cfg->phy_init(phy_drd);
 380
 381         /* reference clock settings */
 382         reg = inst->phy_cfg->set_refclk(inst);
 383
 384                 /* Digital power supply in normal operating mode */
 385         reg |=  PHYCLKRST_RETENABLEN |
 386                 /* Enable ref clock for SS function */
 387                 PHYCLKRST_REF_SSP_EN |
 388                 /* Enable spread spectrum */
 389                 PHYCLKRST_SSC_EN |
 390                 /* Power down HS Bias and PLL blocks in suspend mode */
 391                 PHYCLKRST_COMMONONN |
 392                 /* Reset the port */
 393                 PHYCLKRST_PORTRESET;
 394
 395         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
 396
 397         udelay(10);
 398
 399         reg &= ~PHYCLKRST_PORTRESET;
 400         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
 401
 402         clk_disable_unprepare(phy_drd->clk);
 403
 404         return 0;
 405 }
 406
 407 static int exynos5_usbdrd_phy_exit(struct phy *phy)
 408 {
 409         int ret;
 410         u32 reg;
 411         struct phy_usb_instance *inst = phy_get_drvdata(phy);
 412         struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
 413
 414         ret = clk_prepare_enable(phy_drd->clk);
 415         if (ret)
 416                 return ret;
 417
 418         reg =   PHYUTMI_OTGDISABLE |
 419                 PHYUTMI_FORCESUSPEND |
 420                 PHYUTMI_FORCESLEEP;
 421         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI);
 422
 423         /* Resetting the PHYCLKRST enable bits to reduce leakage current */
 424         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
 425         reg &= ~(PHYCLKRST_REF_SSP_EN |
 426                  PHYCLKRST_SSC_EN |
 427                  PHYCLKRST_COMMONONN);
 428         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
 429
 430         /* Control PHYTEST to remove leakage current */
 431         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
 432         reg |=  PHYTEST_POWERDOWN_SSP |
 433                 PHYTEST_POWERDOWN_HSP;
 434         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
 435
 436         clk_disable_unprepare(phy_drd->clk);
 437
 438         return 0;
 439 }
 440
 441 static int exynos5_usbdrd_phy_power_on(struct phy *phy)
 442 {
 443         int ret;
 444         struct phy_usb_instance *inst = phy_get_drvdata(phy);
 445         struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
 446
 447         dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n");
 448
 449         clk_prepare_enable(phy_drd->ref_clk);
 450
 451         /* Enable VBUS supply */
 452         if (phy_drd->vbus) {
 453                 ret = regulator_enable(phy_drd->vbus);
 454                 if (ret) {
 455                         dev_err(phy_drd->dev, "Failed to enable VBUS supply\n");
 456                         goto fail_vbus;
 457                 }
 458         }
 459
 460         /* Power-on PHY*/
 461         inst->phy_cfg->phy_isol(inst, 0);
 462
 463         return 0;
 464
 465 fail_vbus:
 466         clk_disable_unprepare(phy_drd->ref_clk);
 467
 468         return ret;
 469 }
 470
 471 static int exynos5_usbdrd_phy_power_off(struct phy *phy)
 472 {
 473         struct phy_usb_instance *inst = phy_get_drvdata(phy);
 474         struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
 475
 476         dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n");
 477
 478         /* Power-off the PHY */
 479         inst->phy_cfg->phy_isol(inst, 1);
 480
 481         /* Disable VBUS supply */
 482         if (phy_drd->vbus)
 483                 regulator_disable(phy_drd->vbus);
 484
 485         clk_disable_unprepare(phy_drd->ref_clk);
 486
 487         return 0;
 488 }
 489
 490 static struct phy *exynos5_usbdrd_phy_xlate(struct device *dev,
 491                                         struct of_phandle_args *args)
 492 {
 493         struct exynos5_usbdrd_phy *phy_drd = dev_get_drvdata(dev);
 494
 495         if (WARN_ON(args->args[0] > EXYNOS5_DRDPHYS_NUM))
 496                 return ERR_PTR(-ENODEV);
 497
 498         return phy_drd->phys[args->args[0]].phy;
 499 }
 500
 501 static struct phy_ops exynos5_usbdrd_phy_ops = {
 502         .init           = exynos5_usbdrd_phy_init,
 503         .exit           = exynos5_usbdrd_phy_exit,
 504         .power_on       = exynos5_usbdrd_phy_power_on,
 505         .power_off      = exynos5_usbdrd_phy_power_off,
 506         .owner          = THIS_MODULE,
 507 };
 508
 509 static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = {
 510         {
 511                 .id             = EXYNOS5_DRDPHY_UTMI,
 512                 .phy_isol       = exynos5_usbdrd_phy_isol,
 513                 .phy_init       = exynos5_usbdrd_utmi_init,
 514                 .set_refclk     = exynos5_usbdrd_utmi_set_refclk,
 515         },
 516         {
 517                 .id             = EXYNOS5_DRDPHY_PIPE3,
 518                 .phy_isol       = exynos5_usbdrd_phy_isol,
 519                 .phy_init       = exynos5_usbdrd_pipe3_init,
 520                 .set_refclk     = exynos5_usbdrd_pipe3_set_refclk,
 521         },
 522 };
 523
 524 static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = {
 525         .phy_cfg                = phy_cfg_exynos5,
 526         .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
 527         .pmu_offset_usbdrd1_phy = EXYNOS5420_USBDRD1_PHY_CONTROL,
 528 };
 529
 530 static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = {
 531         .phy_cfg                = phy_cfg_exynos5,
 532         .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
 533 };
 534
 535 static const struct of_device_id exynos5_usbdrd_phy_of_match[] = {
 536         {
 537                 .compatible = "samsung,exynos5250-usbdrd-phy",
 538                 .data = &exynos5250_usbdrd_phy
 539         }, {
 540                 .compatible = "samsung,exynos5420-usbdrd-phy",
 541                 .data = &exynos5420_usbdrd_phy
 542         },
 543         { },
 544 };
 545 MODULE_DEVICE_TABLE(of, exynos5_usbdrd_phy_of_match);
 546
 547 static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
 548 {
 549         struct device *dev = &pdev->dev;
 550         struct device_node *node = dev->of_node;
 551         struct exynos5_usbdrd_phy *phy_drd;
 552         struct phy_provider *phy_provider;
 553         struct resource *res;
 554         const struct of_device_id *match;
 555         const struct exynos5_usbdrd_phy_drvdata *drv_data;
 556         struct regmap *reg_pmu;
 557         u32 pmu_offset;
 558         unsigned long ref_rate;
 559         int i, ret;
 560         int channel;
 561
 562         phy_drd = devm_kzalloc(dev, sizeof(*phy_drd), GFP_KERNEL);
 563         if (!phy_drd)
 564                 return -ENOMEM;
 565
 566         dev_set_drvdata(dev, phy_drd);
 567         phy_drd->dev = dev;
 568
 569         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 570         phy_drd->reg_phy = devm_ioremap_resource(dev, res);
 571         if (IS_ERR(phy_drd->reg_phy))
 572                 return PTR_ERR(phy_drd->reg_phy);
 573
 574         match = of_match_node(exynos5_usbdrd_phy_of_match, pdev->dev.of_node);
 575
 576         drv_data = match->data;
 577         phy_drd->drv_data = drv_data;
 578
 579         phy_drd->clk = devm_clk_get(dev, "phy");
 580         if (IS_ERR(phy_drd->clk)) {
 581                 dev_err(dev, "Failed to get clock of phy controller\n");
 582                 return PTR_ERR(phy_drd->clk);
 583         }
 584
 585         phy_drd->ref_clk = devm_clk_get(dev, "ref");
 586         if (IS_ERR(phy_drd->ref_clk)) {
 587                 dev_err(dev, "Failed to get reference clock of usbdrd phy\n");
 588                 return PTR_ERR(phy_drd->ref_clk);
 589         }
 590         ref_rate = clk_get_rate(phy_drd->ref_clk);
 591
 592         ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk);
 593         if (ret) {
 594                 dev_err(phy_drd->dev, "Clock rate (%ld) not supported\n",
 595                         ref_rate);
 596                 return ret;
 597         }
 598
 599         reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node,
 600                                                    "samsung,pmu-syscon");
 601         if (IS_ERR(reg_pmu)) {
 602                 dev_err(dev, "Failed to lookup PMU regmap\n");
 603                 return PTR_ERR(reg_pmu);
 604         }
 605
 606         /*
 607          * Exynos5420 SoC has multiple channels for USB 3.0 PHY, with
 608          * each having separate power control registers.
 609          * 'channel' facilitates to set such registers.
 610          */
 611         channel = of_alias_get_id(node, "usbdrdphy");
 612         if (channel < 0)
 613                 dev_dbg(dev, "Not a multi-controller usbdrd phy\n");
 614
 615         switch (channel) {
 616         case 1:
 617                 pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd1_phy;
 618                 break;
 619         case 0:
 620         default:
 621                 pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd0_phy;
 622                 break;
 623         }
 624
 625         /* Get Vbus regulator */
 626         phy_drd->vbus = devm_regulator_get(dev, "vbus");
 627         if (IS_ERR(phy_drd->vbus)) {
 628                 ret = PTR_ERR(phy_drd->vbus);
 629                 if (ret == -EPROBE_DEFER)
 630                         return ret;
 631
 632                 dev_warn(dev, "Failed to get VBUS supply regulator\n");
 633                 phy_drd->vbus = NULL;
 634         }
 635
 636         dev_vdbg(dev, "Creating usbdrd_phy phy\n");
 637
 638         for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) {
 639                 struct phy *phy = devm_phy_create(dev, NULL,
 640                                                   &exynos5_usbdrd_phy_ops,
 641                                                   NULL);
 642                 if (IS_ERR(phy)) {
 643                         dev_err(dev, "Failed to create usbdrd_phy phy\n");
 644                         return PTR_ERR(phy);
 645                 }
 646
 647                 phy_drd->phys[i].phy = phy;
 648                 phy_drd->phys[i].index = i;
 649                 phy_drd->phys[i].reg_pmu = reg_pmu;
 650                 phy_drd->phys[i].pmu_offset = pmu_offset;
 651                 phy_drd->phys[i].phy_cfg = &drv_data->phy_cfg[i];
 652                 phy_set_drvdata(phy, &phy_drd->phys[i]);
 653         }
 654
 655         phy_provider = devm_of_phy_provider_register(dev,
 656                                                      exynos5_usbdrd_phy_xlate);
 657         if (IS_ERR(phy_provider)) {
 658                 dev_err(phy_drd->dev, "Failed to register phy provider\n");
 659                 return PTR_ERR(phy_provider);
 660         }
 661
 662         return 0;
 663 }
 664
 665 static struct platform_driver exynos5_usb3drd_phy = {
 666         .probe  = exynos5_usbdrd_phy_probe,
 667         .driver = {
 668                 .of_match_table = exynos5_usbdrd_phy_of_match,
 669                 .name           = "exynos5_usb3drd_phy",
 670                 .owner          = THIS_MODULE,
 671         }
 672 };
 673
 674 module_platform_driver(exynos5_usb3drd_phy);
 675 MODULE_DESCRIPTION("Samsung EXYNOS5 SoCs USB 3.0 DRD controller PHY driver");
 676 MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>");
 677 MODULE_LICENSE("GPL v2");
 678 MODULE_ALIAS("platform:exynos5_usb3drd_phy");