drivers/phy/amlogic/phy-meson8b-usb2.c

   1 /*
   2  * Meson8, Meson8b and GXBB USB2 PHY driver
   3  *
   4  * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  * You should have received a copy of the GNU General Public License
  11  * along with this program. If not, see <http://www.gnu.org/licenses/>.
  12  */
  13
  14 #include <linux/clk.h>
  15 #include <linux/delay.h>
  16 #include <linux/io.h>
  17 #include <linux/module.h>
  18 #include <linux/of_device.h>
  19 #include <linux/reset.h>
  20 #include <linux/phy/phy.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/usb/of.h>
  23
  24 #define REG_CONFIG                                      0x00
  25         #define REG_CONFIG_CLK_EN                       BIT(0)
  26         #define REG_CONFIG_CLK_SEL_MASK                 GENMASK(3, 1)
  27         #define REG_CONFIG_CLK_DIV_MASK                 GENMASK(10, 4)
  28         #define REG_CONFIG_CLK_32k_ALTSEL               BIT(15)
  29         #define REG_CONFIG_TEST_TRIG                    BIT(31)
  30
  31 #define REG_CTRL                                        0x04
  32         #define REG_CTRL_SOFT_PRST                      BIT(0)
  33         #define REG_CTRL_SOFT_HRESET                    BIT(1)
  34         #define REG_CTRL_SS_SCALEDOWN_MODE_MASK         GENMASK(3, 2)
  35         #define REG_CTRL_CLK_DET_RST                    BIT(4)
  36         #define REG_CTRL_INTR_SEL                       BIT(5)
  37         #define REG_CTRL_CLK_DETECTED                   BIT(8)
  38         #define REG_CTRL_SOF_SENT_RCVD_TGL              BIT(9)
  39         #define REG_CTRL_SOF_TOGGLE_OUT                 BIT(10)
  40         #define REG_CTRL_POWER_ON_RESET                 BIT(15)
  41         #define REG_CTRL_SLEEPM                         BIT(16)
  42         #define REG_CTRL_TX_BITSTUFF_ENN_H              BIT(17)
  43         #define REG_CTRL_TX_BITSTUFF_ENN                BIT(18)
  44         #define REG_CTRL_COMMON_ON                      BIT(19)
  45         #define REG_CTRL_REF_CLK_SEL_MASK               GENMASK(21, 20)
  46         #define REG_CTRL_REF_CLK_SEL_SHIFT              20
  47         #define REG_CTRL_FSEL_MASK                      GENMASK(24, 22)
  48         #define REG_CTRL_FSEL_SHIFT                     22
  49         #define REG_CTRL_PORT_RESET                     BIT(25)
  50         #define REG_CTRL_THREAD_ID_MASK                 GENMASK(31, 26)
  51
  52 #define REG_ENDP_INTR                                   0x08
  53
  54 /* bits [31:26], [24:21] and [15:3] seem to be read-only */
  55 #define REG_ADP_BC                                      0x0c
  56         #define REG_ADP_BC_VBUS_VLD_EXT_SEL             BIT(0)
  57         #define REG_ADP_BC_VBUS_VLD_EXT                 BIT(1)
  58         #define REG_ADP_BC_OTG_DISABLE                  BIT(2)
  59         #define REG_ADP_BC_ID_PULLUP                    BIT(3)
  60         #define REG_ADP_BC_DRV_VBUS                     BIT(4)
  61         #define REG_ADP_BC_ADP_PRB_EN                   BIT(5)
  62         #define REG_ADP_BC_ADP_DISCHARGE                BIT(6)
  63         #define REG_ADP_BC_ADP_CHARGE                   BIT(7)
  64         #define REG_ADP_BC_SESS_END                     BIT(8)
  65         #define REG_ADP_BC_DEVICE_SESS_VLD              BIT(9)
  66         #define REG_ADP_BC_B_VALID                      BIT(10)
  67         #define REG_ADP_BC_A_VALID                      BIT(11)
  68         #define REG_ADP_BC_ID_DIG                       BIT(12)
  69         #define REG_ADP_BC_VBUS_VALID                   BIT(13)
  70         #define REG_ADP_BC_ADP_PROBE                    BIT(14)
  71         #define REG_ADP_BC_ADP_SENSE                    BIT(15)
  72         #define REG_ADP_BC_ACA_ENABLE                   BIT(16)
  73         #define REG_ADP_BC_DCD_ENABLE                   BIT(17)
  74         #define REG_ADP_BC_VDAT_DET_EN_B                BIT(18)
  75         #define REG_ADP_BC_VDAT_SRC_EN_B                BIT(19)
  76         #define REG_ADP_BC_CHARGE_SEL                   BIT(20)
  77         #define REG_ADP_BC_CHARGE_DETECT                BIT(21)
  78         #define REG_ADP_BC_ACA_PIN_RANGE_C              BIT(22)
  79         #define REG_ADP_BC_ACA_PIN_RANGE_B              BIT(23)
  80         #define REG_ADP_BC_ACA_PIN_RANGE_A              BIT(24)
  81         #define REG_ADP_BC_ACA_PIN_GND                  BIT(25)
  82         #define REG_ADP_BC_ACA_PIN_FLOAT                BIT(26)
  83
  84 #define REG_DBG_UART                                    0x10
  85
  86 #define REG_TEST                                        0x14
  87         #define REG_TEST_DATA_IN_MASK                   GENMASK(3, 0)
  88         #define REG_TEST_EN_MASK                        GENMASK(7, 4)
  89         #define REG_TEST_ADDR_MASK                      GENMASK(11, 8)
  90         #define REG_TEST_DATA_OUT_SEL                   BIT(12)
  91         #define REG_TEST_CLK                            BIT(13)
  92         #define REG_TEST_VA_TEST_EN_B_MASK              GENMASK(15, 14)
  93         #define REG_TEST_DATA_OUT_MASK                  GENMASK(19, 16)
  94         #define REG_TEST_DISABLE_ID_PULLUP              BIT(20)
  95
  96 #define REG_TUNE                                        0x18
  97         #define REG_TUNE_TX_RES_TUNE_MASK               GENMASK(1, 0)
  98         #define REG_TUNE_TX_HSXV_TUNE_MASK              GENMASK(3, 2)
  99         #define REG_TUNE_TX_VREF_TUNE_MASK              GENMASK(7, 4)
 100         #define REG_TUNE_TX_RISE_TUNE_MASK              GENMASK(9, 8)
 101         #define REG_TUNE_TX_PREEMP_PULSE_TUNE           BIT(10)
 102         #define REG_TUNE_TX_PREEMP_AMP_TUNE_MASK        GENMASK(12, 11)
 103         #define REG_TUNE_TX_FSLS_TUNE_MASK              GENMASK(16, 13)
 104         #define REG_TUNE_SQRX_TUNE_MASK                 GENMASK(19, 17)
 105         #define REG_TUNE_OTG_TUNE                       GENMASK(22, 20)
 106         #define REG_TUNE_COMP_DIS_TUNE                  GENMASK(25, 23)
 107         #define REG_TUNE_HOST_DM_PULLDOWN               BIT(26)
 108         #define REG_TUNE_HOST_DP_PULLDOWN               BIT(27)
 109
 110 #define RESET_COMPLETE_TIME                             500
 111 #define ACA_ENABLE_COMPLETE_TIME                        50
 112
 113 struct phy_meson8b_usb2_priv {
 114         void __iomem            *regs;
 115         enum usb_dr_mode        dr_mode;
 116         struct clk              *clk_usb_general;
 117         struct clk              *clk_usb;
 118         struct reset_control    *reset;
 119 };
 120
 121 static u32 phy_meson8b_usb2_read(struct phy_meson8b_usb2_priv *phy_priv,
 122                                  u32 reg)
 123 {
 124         return readl(phy_priv->regs + reg);
 125 }
 126
 127 static void phy_meson8b_usb2_mask_bits(struct phy_meson8b_usb2_priv *phy_priv,
 128                                        u32 reg, u32 mask, u32 value)
 129 {
 130         u32 data;
 131
 132         data = phy_meson8b_usb2_read(phy_priv, reg);
 133         data &= ~mask;
 134         data |= (value & mask);
 135
 136         writel(data, phy_priv->regs + reg);
 137 }
 138
 139 static int phy_meson8b_usb2_power_on(struct phy *phy)
 140 {
 141         struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
 142         int ret;
 143
 144         if (!IS_ERR_OR_NULL(priv->reset)) {
 145                 ret = reset_control_reset(priv->reset);
 146                 if (ret) {
 147                         dev_err(&phy->dev, "Failed to trigger USB reset\n");
 148                         return ret;
 149                 }
 150         }
 151
 152         ret = clk_prepare_enable(priv->clk_usb_general);
 153         if (ret) {
 154                 dev_err(&phy->dev, "Failed to enable USB general clock\n");
 155                 return ret;
 156         }
 157
 158         ret = clk_prepare_enable(priv->clk_usb);
 159         if (ret) {
 160                 dev_err(&phy->dev, "Failed to enable USB DDR clock\n");
 161                 clk_disable_unprepare(priv->clk_usb_general);
 162                 return ret;
 163         }
 164
 165         phy_meson8b_usb2_mask_bits(priv, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL,
 166                                    REG_CONFIG_CLK_32k_ALTSEL);
 167
 168         phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK,
 169                                    0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);
 170
 171         phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_FSEL_MASK,
 172                                    0x5 << REG_CTRL_FSEL_SHIFT);
 173
 174         /* reset the PHY */
 175         phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET,
 176                                    REG_CTRL_POWER_ON_RESET);
 177         udelay(RESET_COMPLETE_TIME);
 178         phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0);
 179         udelay(RESET_COMPLETE_TIME);
 180
 181         phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT,
 182                                    REG_CTRL_SOF_TOGGLE_OUT);
 183
 184         if (priv->dr_mode == USB_DR_MODE_HOST) {
 185                 phy_meson8b_usb2_mask_bits(priv, REG_ADP_BC,
 186                                            REG_ADP_BC_ACA_ENABLE,
 187                                            REG_ADP_BC_ACA_ENABLE);
 188
 189                 udelay(ACA_ENABLE_COMPLETE_TIME);
 190
 191                 if (phy_meson8b_usb2_read(priv, REG_ADP_BC) &
 192                         REG_ADP_BC_ACA_PIN_FLOAT) {
 193                         dev_warn(&phy->dev, "USB ID detect failed!\n");
 194                         clk_disable_unprepare(priv->clk_usb);
 195                         clk_disable_unprepare(priv->clk_usb_general);
 196                         return -EINVAL;
 197                 }
 198         }
 199
 200         return 0;
 201 }
 202
 203 static int phy_meson8b_usb2_power_off(struct phy *phy)
 204 {
 205         struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy);
 206
 207         clk_disable_unprepare(priv->clk_usb);
 208         clk_disable_unprepare(priv->clk_usb_general);
 209
 210         return 0;
 211 }
 212
 213 static const struct phy_ops phy_meson8b_usb2_ops = {
 214         .power_on       = phy_meson8b_usb2_power_on,
 215         .power_off      = phy_meson8b_usb2_power_off,
 216         .owner          = THIS_MODULE,
 217 };
 218
 219 static int phy_meson8b_usb2_probe(struct platform_device *pdev)
 220 {
 221         struct phy_meson8b_usb2_priv *priv;
 222         struct resource *res;
 223         struct phy *phy;
 224         struct phy_provider *phy_provider;
 225
 226         priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 227         if (!priv)
 228                 return -ENOMEM;
 229
 230         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 231         priv->regs = devm_ioremap_resource(&pdev->dev, res);
 232         if (IS_ERR(priv->regs))
 233                 return PTR_ERR(priv->regs);
 234
 235         priv->clk_usb_general = devm_clk_get(&pdev->dev, "usb_general");
 236         if (IS_ERR(priv->clk_usb_general))
 237                 return PTR_ERR(priv->clk_usb_general);
 238
 239         priv->clk_usb = devm_clk_get(&pdev->dev, "usb");
 240         if (IS_ERR(priv->clk_usb))
 241                 return PTR_ERR(priv->clk_usb);
 242
 243         priv->reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
 244         if (PTR_ERR(priv->reset) == -EPROBE_DEFER)
 245                 return PTR_ERR(priv->reset);
 246
 247         priv->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
 248         if (priv->dr_mode == USB_DR_MODE_UNKNOWN) {
 249                 dev_err(&pdev->dev,
 250                         "missing dual role configuration of the controller\n");
 251                 return -EINVAL;
 252         }
 253
 254         phy = devm_phy_create(&pdev->dev, NULL, &phy_meson8b_usb2_ops);
 255         if (IS_ERR(phy)) {
 256                 dev_err(&pdev->dev, "failed to create PHY\n");
 257                 return PTR_ERR(phy);
 258         }
 259
 260         phy_set_drvdata(phy, priv);
 261
 262         phy_provider =
 263                 devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
 264
 265         return PTR_ERR_OR_ZERO(phy_provider);
 266 }
 267
 268 static const struct of_device_id phy_meson8b_usb2_of_match[] = {
 269         { .compatible = "amlogic,meson8-usb2-phy", },
 270         { .compatible = "amlogic,meson8b-usb2-phy", },
 271         { .compatible = "amlogic,meson-gxbb-usb2-phy", },
 272         { },
 273 };
 274 MODULE_DEVICE_TABLE(of, phy_meson8b_usb2_of_match);
 275
 276 static struct platform_driver phy_meson8b_usb2_driver = {
 277         .probe  = phy_meson8b_usb2_probe,
 278         .driver = {
 279                 .name           = "phy-meson-usb2",
 280                 .of_match_table = phy_meson8b_usb2_of_match,
 281         },
 282 };
 283 module_platform_driver(phy_meson8b_usb2_driver);
 284
 285 MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
 286 MODULE_DESCRIPTION("Meson8, Meson8b and GXBB USB2 PHY driver");
 287 MODULE_LICENSE("GPL");